| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix queuing tx_work after workqueue is drained
hci_send_acl(), hci_send_sco() and hci_send_iso() queue hdev->tx_work
unconditionally. They can run from the L2CAP/SCO/ISO socket send path
while hci_dev_close_sync() is draining hdev->workqueue (HCIDEVDOWN
racing with a socket write). Since that queue_work() is not chained
work from the tx_work worker itself, __queue_work() sees the queue
marked __WQ_DRAINING, warns "cannot queue %ps on wq %s", and drops
the work:
WARNING: CPU: 1 PID: 5985 at kernel/workqueue.c:2352 __queue_work
Call Trace:
queue_work_on
l2cap_chan_send
l2cap_sock_sendmsg
...
hci_dev_close_sync() already sets HCI_CMD_DRAIN_WORKQUEUE before
draining, but only hci_cmd_work() and handle_cmd_cnt_and_timer()
check it before queuing. Route the tx_work producers through the
same guard via a shared hci_sched_tx() helper. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Clamp implicit feedback packet count to URB capacity
data_ep_set_params() allocates each data URB for exactly u->packets
isochronous frames, so urb->iso_frame_desc[] has u->packets slots and
ctx->packets is the driver's only record of that limit. For an implicit
feedback sink, snd_usb_queue_pending_output_urbs() overwrites it with the
sync source's packet count, which is calculated independently from the
capture endpoint's parameters. When that count is larger,
prepare_playback_urb() and prepare_silent_urb() can write
iso_frame_desc[] past the allocation; their existing bounds limit payload
bytes, not the descriptor index.
The reproducer uses a high-speed UAC2 device declaring bInterval 1 for
implicit feedback capture (8 packets) and bInterval 4 for playback
(1 packet). On the first capture completion after the stream starts, it
accesses seven descriptors spanning 112 bytes beyond the one-packet URB:
BUG: KASAN: slab-out-of-bounds in prepare_playback_urb (sound/usb/pcm.c:1560)
Write of size 4 at addr ffff88801e696ad0 by task vhci_rx/178
prepare_playback_urb (sound/usb/pcm.c:1560)
prepare_outbound_urb (sound/usb/endpoint.c:340)
snd_usb_queue_pending_output_urbs (sound/usb/endpoint.c:501)
snd_complete_urb (sound/usb/endpoint.c:1834)
__usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657)
usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1741)
vhci_rx_loop (drivers/usb/usbip/vhci_rx.c:107)
kthread (kernel/kthread.c:436)
The buggy address belongs to the object at ffff88801e696a00
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes to the right of
allocated 208-byte region [ffff88801e696a00, ffff88801e696ad0)
Record the allocated packet count per endpoint and clamp both the adopted
count and the packet-size copy to it. Fold the Format Type II delimiter
into urb_packs before the allocation loop so the recorded limit matches
every URB. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: take commit root semaphore when iterating in mark_block_group_to_copy()
mark_block_group_to_copy() iterates over the commit root with
skip_locking=true. A concurrent transaction commit can swap and free
the commit root during iteration, causing use-after-free when
accessing extent buffers.
Fix it by using path->need_commit_sem to protect the commit root search. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pwm-fan) Stop RPM timer before freeing tach data
sample_timer() rearms the RPM timer and accesses the devm-managed
ctx->tachs and ctx->pulses_per_revolution arrays. The cleanup action
which stops the timer is registered before those arrays are allocated.
Since devres releases entries in reverse order, driver detach can free
the arrays before pwm_fan_cleanup() shuts down the timer. A timer expiry
in that window accesses the freed tach data.
With a KASAN kernel, a test-only kprobe delayed entry to
pwm_fan_cleanup() while normal sysfs unbind ran. Each of three runs
reported three four-byte reads and two four-byte writes in sample_timer()
after its backing devm allocations had been freed. The helper did not
invoke the timer callback, cleanup actions or free functions.
With the fix, three matching unbind runs completed without KASAN, BUG,
WARNING, Oops or panic. Instrumentation confirmed that timer retirement
completed before the first timer backing allocation was released.
Split timer retirement from the power cleanup and register its devres
action after the timer backing data and IRQ actions are installed. This
preserves the early power rollback action while ensuring the timer is
retired before its backing data is released. Use timer_shutdown_sync()
because the callback can rearm itself. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject TKIP frames without a full MIC
libipw_michael_mic_verify() assumes that an skb contains an eight-byte
Michael MIC. A short TKIP frame makes the unsigned payload length wrap,
causing michael_mic() to read past the skb.
Check that the MIC is present before verifying it, and use the existing
MICHAEL_MIC_LEN constant for all MIC lengths in the verifier. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wcn36xx: Fix potential use-after-free in TX ack timer teardown
wcn36xx_dxe_deinit() tears down the TX ack timer with timer_delete(),
which only dequeues the timer and does not wait for a callback that is
already executing; the preceding free_irq() calls synchronize the
interrupt handlers only. The callback, wcn36xx_dxe_tx_timer(), can
therefore be running past the teardown and use the wcn freed along
with the ieee80211_hw in wcn36xx_remove(): it takes wcn->dxe_lock,
reads wcn->tx_ack_skb and passes wcn->hw to
ieee80211_tx_status_irqsafe().
Fix this by using timer_shutdown_sync(), which waits for a running
callback and also prevents the timer from being rearmed again. The
timer is set up again by wcn36xx_dxe_init() on the next start, so the
start/stop cycle is unaffected.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free of iface in cifs_try_adding_channels()
cifs_try_adding_channels() iterates ses->iface_list with
list_for_each_entry_safe_from(), which captures the next entry
(niface) under iface_lock. The loop body then drops iface_lock for
the whole duration of cifs_ses_add_channel().
A concurrent interface refresh (SMB3_request_interfaces() ->
parse_server_interfaces()) marks all ifaces inactive and removes and
frees any that are not re-advertised via list_del() + kref_put(),
where release_iface() is a bare kfree(). Since niface typically has
no channel holding a reference, the list reference is its last and it
can be freed inside the unlocked window. On continue, the iterator
advance step then dereferences niface->iface_head.next, and the loop
body reads iface->rdma_capable/is_active, both on freed memory.
Fix this by never keeping an unreferenced list pointer across the
unlocked window. Each channel attempt now re-scans the list from the
head under iface_lock, takes a kref on the selected candidate, and
passes only that referenced candidate to cifs_ses_add_channel().
weight_fulfilled still tracks selection progress, so restarting the
scan preserves the original weighted distribution and the
weight_fulfilled-before-kref_put ordering on the failure path.
Add a per-pass attempts cap so a flapping interface refresh cannot
keep the inner loop spinning within a single tries increment. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB struct field reads in move_smb2_ea_to_cifs()
In move_smb2_ea_to_cifs(), the while (src_size > 0) loop condition is
insufficient. It allows iteration to continue even if the remaining
src_size is too small to contain a complete smb2_ea_info structure.
Consequently, reads of ea_name_length and ea_value_length can occur
out-of-bounds.
Fix this by ensuring src_size >= sizeof(*src) before attempting to read
any structure fields. Additionally, reject any next_entry_offset that is
smaller than sizeof(*src) or that would advance the pointer beyond the
available buffer.
Note that for calls where the server returns a malformed EA list, the
error returned to userspace changes from -ENODATA (getxattr) or
-ERANGE (listxattr) to -EIO. This correctly signals a server protocol
error rather than misleadingly indicating "attribute not present" or
"output buffer too small". |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix reparse buffer bounds in cifs_query_reparse_point()
In cifs_query_reparse_point(), the start >= end check before casting to
struct reparse_data_buffer * only ensures the start pointer is within the
response. It fails to verify that there is enough space remaining for the
fixed 8-byte header of the structure.
If a server provides a DataOffset that leaves less than 8 bytes remaining,
the check passes, but subsequent reads of ReparseTag and ReparseDataLength
will occur out-of-bounds.
Fix this by ensuring the remaining space is at least the size of the
reparse_data_buffer structure before accessing its fields. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix tree connection leak in smb2_tree_connect()
See the procedure below:
smb2_tree_connect
ksmbd_tree_conn_connect
xa_store(&sess->tree_conns, tree_conn->id, tree_conn)
ksmbd_counter_inc(KSMBD_COUNTER_TREE_CONNS)
ksmbd_share_tree_conn_inc(sc)
ksmbd_iov_pin_rsp // fail
status.ret = KSMBD_TREE_CONN_STATUS_NOMEM
// do not disconnect tree_conn
Disconnect the new tree connection if ksmbd_iov_pin_rsp() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm: pmem: keep PREFLUSH before data writes
pmem_submit_bio() records a REQ_PREFLUSH error, but continues to copy the
bio data and can later overwrite the error with a successful REQ_FUA flush.
That lets data writes run after a failed preflush and can complete the bio
successfully despite the failed ordering barrier.
Run the REQ_PREFLUSH flush synchronously before touching the bio data and
complete the bio with the flush error if it fails. Keep asynchronous flush
chaining for REQ_FUA. At that point, data copy has completed and the parent
bio can wait for the chained flush bio. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: use the DMA API for resource backing on Xen
On a Xen PV domain page addresses bear no relation to the real machine
addresses the host would have to use to reach it.
virtio_ring.c handles this correctly, vring_use_map_api() returns true
for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM.
virtio-gpu makes the same decision independently, but its copy
looks only at the feature bit:
bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev);
QEMU does not set iommu_platform on virtio-vga by default, so
VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and
virtio_gpu_object_shmem_init() describes the framebuffer's backing pages
to the host with sg_phys(). Those are guest-physical addresses. In a PV
domain they resolve, on the host side, to pages belonging to some other
domain, so the host scans out unrelated memory.
Move the decision into virtio_gpu_use_dma_api() and give it the
xen_domain() check, like vring_use_map_api() has. This
additionally enables the dma_sync_sgtable_for_device() calls in
virtgpu_vq.c, which are required for correctness whenever swiotlb
is in play.
Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with
virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0
works fine and doesn't need this fix because it is identity-mapped,
only PV dom0s are affected. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: validate GUD_ROTATION_0 is present in supported rotations
The rotation argument to drm_plane_create_rotation_property() is set to
DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as
the supported_rotations argument. The driver never validates that
GUD_ROTATION_0 is present, so a device that omits it from its
GUD_PROPERTY_ROTATION triggers the
WARN_ON(rotation & ~supported_rotations) in
drm_plane_create_rotation_property()
Fix this by skipping the creation of rotation property if the device
doesn't have the GUD_ROTATION_0 bit |
| In the Linux kernel, the following vulnerability has been resolved:
printk: Don't WARN on kthread_run failure.
Since __kthread_create_on_node() returns -EINTR upon SIGKILL,
we should not use WARN_ON() in order to catch kthread_run() failure. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: check_cond_jmp_op(): properly infer if register is null
Nicholas Carlini reported a bug when verifier can incorrectly infer
that a pointer is non-null. The bug occurs when two pointers are
compared and one of them has a type w/o PTR_MAYBE_NULL flag,
but which allows a value to be NULL at runtime.
Here is an example:
// `a` is PTR_TO_MEM | MEM_RDONLY | PTR_UNTRUSTED
// `a` is 0 at runtime.
// `b` is PTR_TO_MAP_VALUE | PTR_MAYBE_NULL
void *a = bpf_rdonly_cast(0, 0);
int *b = bpf_map_lookup_elem(...);
if (a == b)
*b = 42; // verifier does not catch null pointer dereference
This happens because of a special case in check_cond_jmp_op(),
which attempts to strip PTR_MAYBE_NULL flags from pointer types,
when processing comparisons like `rA == rB`, if either rA or rB can't
be null.
The non-null property is derived based on the absence of
PTR_MAYBE_NULL flag on rA's or rB's type. But that is not sufficient
for types like PTR_TO_MEM, as in the example.
This patch replaces type_may_be_null() call with reg_not_null(),
which contains an allowlist of types for which absence of
PTR_MAYBE_NULL actually means that the value can't be NULL at runtime.
At the moment, the list in the reg_not_null() omits two types for
which PTR_MAYBE_NULL is applicable: PTR_TO_XDP_SOCK and PTR_TO_BUF.
In order to remain backward compatible, and assuming that only
comparison between pointers of the same type makes sense,
this commit extends reg_not_null(). W/o such an extension e.g.
verifier_jeq_infer_not_null/null_ptr_to_map_value fails.
reg_not_null() can be extended further, but I deem that out of scope
for the fix at hand. Explicit base_type(...) != PTR_TO_BTF_ID
checks in the check_cond_jmp_op() can be removed with migration to
reg_not_null(), but that is a behavioural change, as the special case
would start matching for PTR_TO_BTF_ID that is also is_trusted_reg().
I omit the behavioural change from this commit. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix dma mapping leak in stmmac_tso_xmit()
In stmmac_tso_xmit(), if the DMA mapping of an skb fragment fails, the
frame is dropped but the DMA mappings already created for the linear
part and for the fragments mapped before the failure are never
unmapped, leaking DMA mappings.
Fix the leak by walking back over the descriptors used by the frame and
releasing each of them with stmmac_free_tx_buffer(). Moreover, release
the descriptors with stmmac_release_tx_desc() unmapping the DMA buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for insert range
smb3_insert_range() does not check if the new file size
(i_size + len) is valid. This allows FALLOC_FL_INSERT_RANGE to bypass
RLIMIT_FSIZE, exceed s_maxbytes, or produce a size outside the loff_t
range.
Use check_add_overflow() to calculate the new EOF. Validate it with
inode_newsize_ok() before modifying the file.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072 # RLIMIT_FSIZE = 3 MiB
# A regular write is stopped at 3 MiB.
dd if=/dev/zero of="$FILE" bs=1M count=4 status=none
stat -c "size after write: %s" "$FILE"
# Insert 2 MiB into a 2 MiB file.
truncate -s 2M "$FILE"
fallocate -i -o 0 -l 2M "$FILE"
stat -c "size after insert: %s" "$FILE"
'
Before this change, the regular write stops at the 3 MiB limit, but
insert range grows the file to 4 MiB:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
size after insert: 4194304
After this change, insert range also fails at the limit and leaves the
2 MiB file unchanged:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
fallocate: fallocate failed: File too large
size after insert: 2097152 |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for zero range
When FALLOC_FL_ZERO_RANGE is used without FALLOC_FL_KEEP_SIZE,
smb3_zero_range() may extend EOF without checking RLIMIT_FSIZE, allowing
the file to grow beyond the caller's file-size limit.
Fix this by calling inode_newsize_ok() before sending the zero-range
request when the operation would extend EOF.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072
truncate -s 2M "$FILE"
fallocate --zero-range -o 0 -l 4M "$FILE"
echo "fallocate rc=$?"
stat -c "file size=%s" "$FILE"
'
Before this change, the operation succeeds despite the 3 MiB limit:
fallocate rc=0
file size=4194304
After this change, fallocate fails and leaves the file at 2 MiB. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix stale page cache in insert/collapse range
smb3_insert_range() and smb3_collapse_range() use
truncate_pagecache_range() to invalidate the affected page cache.
However, if off or old_eof is not page-aligned, the boundary pages are
only partially zeroed and remain uptodate. As a result, the client may
return stale data after a successful insert/collapse range operation.
For example, with 4K pages:
page 0 page 1 page 2
0------4K 4K------8K 8K------12K
^ ^
off=2K old_eof=10K
Page 1 is removed from the page cache, while the boundary pages are
only partially zeroed. After COPYCHUNK moves the data on the server,
these cached pages may still return stale data.
This can be reproduced on a CIFS mount:
bash -c '
FILE=/mnt/scratch/repro
# Use a 6 KiB file so EOF is not page-aligned.
dd if=/dev/urandom of=/tmp/src bs=1K count=6 status=none
# Expected: a 4 KiB hole followed by the original data.
rm -f /tmp/expected
truncate -s 4K /tmp/expected
cat /tmp/src >> /tmp/expected
cp /tmp/src "$FILE"
# Prime the page cache before moving data on the server.
cat "$FILE" > /dev/null
fallocate --insert-range -o 0 -l 4K "$FILE"
if cmp -s /tmp/expected "$FILE"; then
echo "readback: OK"
else
echo "readback: STALE DATA"
fi
'
Fix this by writing back dirty data and discarding the page cache from
the start of the page containing off to EOF before moving data on the
server. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: invalidate fscache for fallocate range operations
smb3_zero_range(), smb3_punch_hole(), smb3_insert_range(), and
smb3_collapse_range() modify file contents through server-side range
operations. These operations discard the affected page cache, but leave
the FS-Cache cookie valid, so a later read may return data cached before
the range operation.
Fix this by invalidating FS-Cache after outstanding I/O has completed
and before modifying the file on the server.
Run the following as root on a CIFS mount with fsc enabled and an active
CacheFiles backend:
bash -c '
MNT=/mnt/cifs
FILE="$MNT/repro"
# Generate four 1 MiB random blocks: [A][B][C][D].
dd if=/dev/urandom of=/tmp/src bs=1M count=4 status=none
# Expected contents after zeroing B: [A][zero][C][D].
cp /tmp/src /tmp/expected
dd if=/dev/zero of=/tmp/expected bs=1M seek=1 count=1 \
conv=notrunc status=none
cp /tmp/src "$FILE"
# Populate FS-Cache, then discard the page cache.
sync
echo 1 > /proc/sys/vm/drop_caches
cat "$FILE" > /dev/null
sync
echo 1 > /proc/sys/vm/drop_caches
fallocate --zero-range -o 1M -l 1M "$FILE"
if cmp -s /tmp/expected "$FILE"; then
echo "readback: OK"
else
echo "readback: STALE DATA"
fi
'
Before this change, the readback differs from /tmp/expected:
readback: STALE DATA
After this change, it matches:
readback: OK |
