| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the LightGlue model loading path of huggingface/transformers version 5.2.0 allows an attacker-controlled model repository to execute arbitrary code during model initialization. The issue arises because the `trust_remote_code` parameter, intended to prevent remote code execution, is overridden by untrusted serialized configuration data in a nested code path. Specifically, when loading a LightGlue model using `AutoModel.from_pretrained()` with `trust_remote_code=False`, the `LightGlueConfig` reads the `trust_remote_code` value from the untrusted `config.json` file and propagates it into nested `AutoConfig.from_pretrained()` calls. This results in the execution of attacker-provided Python modules, even when the victim explicitly disables remote code execution. The vulnerability poses a high risk for environments such as API inference servers, research notebooks, CI/CD pipelines, and model evaluation workers, potentially leading to credential theft, lateral movement, or persistence/backdoor deployment. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: sloppy-logic-analyzer: fix use-after-free via debugfs trigger on unbind
The "trigger" debugfs file has a hand-rolled ->write handler
(trigger_write()) that dereferences the per-device gpio_la_poll_priv. The
file is created with debugfs_create_file_unsafe(), and the handler never
takes a debugfs reference. Nothing keeps the object alive while the
handler runs.
priv is allocated with devm_kzalloc(). devres frees it when the platform
device is unbound. debugfs_create_file_unsafe() installs no full_proxy
wrapper, so debugfs_remove_recursive() in gpio_la_poll_remove() does not
wait for an in-flight trigger_write(). The blob_lock taken there does not
help, because trigger_write() never takes it. A write that races an unbind
therefore writes into freed memory:
trigger_write() gpio_la_poll_remove()
priv = m->private
buf = memdup_user() [may sleep]
mutex_lock(&priv->blob_lock)
debugfs_remove_recursive() [no wait]
mutex_unlock(&priv->blob_lock)
(remove returns; devres frees priv)
priv->trig_data = buf <-- use-after-free write
priv->trig_len = count
The race is reachable by root via
/sys/bus/platform/drivers/gpio-sloppy-logic-analyzer/unbind.
Create "trigger" with debugfs_create_file() instead. Its full_proxy
wrapper makes debugfs_remove_recursive() drain any in-flight ->write
before it returns.
The use-after-free is confirmed under KASAN with a minimal reproducer of
the same debugfs_create_file_unsafe() plus devm_kzalloc() pattern
(available on request); it produces a slab-use-after-free write in the
handler. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix memory leak of bonding resources
In a corner case of concurrent driver removal and driver reset,
bonding resource is first released in hns_roce_hw_v2_exit() during
driver removal, and then is allocated again in hns_roce_register_device()
during driver reset. This leads to memory leak because the release
timing has already passed. This may also lead to a kernel panic
as below because of the leaked notifier callback:
Call trace:
0xffffa20fccc04978 (P)
raw_notifier_call_chain+0x20/0x38
call_netdevice_notifiers_info+0x60/0xb8
netdev_lower_state_changed+0x4c/0xb8
As Sashiko suggested, the teardown order of bonding resources should
be inverted to make sure the resources are released when the driver
is removed. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Initialize hba->rpmbs list in ufshcd
Initialize the hba->rpmbs list in ufshcd_alloc_host() to prevent NULL
pointer dereference in the device teardown path if ufs_rpmb_probe()
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: atmel-mci: Fix use-after-free in atmci_remove due to race condition
In atmci_probe, &host->bh_work is bound with atmci_work_func, and
atmci_interrupt, atmci_timeout_timer and atmci_dma_complete can all
queue this work on system_bh_wq.
If we remove the module, atmci_remove makes cleanup and the memory
allocated for host with devm_kzalloc() is released after the remove
callback returns, while the work mentioned above may still be pending
or running. The sequence of operations that may lead to a UAF bug is
as follows:
CPU0 CPU1
| atmci_interrupt
| queue_work(system_bh_wq,
| &host->bh_work)
atmci_remove |
atmci_cleanup_slot(...) |
atmci_writel(host, ATMCI_IDR, ~0UL) |
timer_delete_sync(&host->timer) |
dma_release_channel(host->dma.chan) |
free_irq(platform_get_irq(pdev, 0), host) |
| atmci_work_func
| // use host
// devm resources released after |
// remove returns, host is freed |
| // use host (use-after-free)
Fix it by canceling the work after all the sources that can schedule
it (IRQ handler, timeout timer and DMA completion callback) have been
stopped, and before proceeding with the remaining cleanup in
atmci_remove. |
| OpenTelemetry-Go is the Go implementation of OpenTelemetry. From version 0.11.0 through 1.44.0, the OpenTracing bridge's bridgeSpan contains an unsynchronized extraBaggageItems map which can cause a panic. Because Go maps are not safe for concurrent read/write access, concurrent SetBaggageItem and correlation.MapFromContext calls on the same hooked bridgeSpan can trigger a fatal runtime error—such as concurrent map read and map write or concurrent map iteration and map write—terminating the process and causing denial of service. This issue is fixed in version 1.45.0. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: ml-ioh: use raw_spinlock_t for the register lock
ioh_irq_type() is registered as the irq_chip .irq_set_type callback and
takes chip->spinlock with spin_lock_irqsave(). This callback is reached
from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while
the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled.
That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is
an rtmutex-backed sleeping lock, so acquiring it there is invalid.
ioh_irq_enable() and ioh_irq_disable() take the same lock from the
.irq_enable/.irq_disable callbacks, which are likewise invoked with
desc->lock held.
Convert the register lock to raw_spinlock_t. The same lock also
serializes the GPIO direction/value callbacks and the suspend/resume
register save/restore, and those critical sections only perform short
sequences of MMIO register accesses (ioread32()/iowrite32()); the
.irq_set_type callback additionally emits a dev_warn() on an unsupported
type. None of these are sleepable operations, so keeping this register
lock non-sleeping is appropriate for the irqchip callbacks and does not
change the GPIO-side locking contract.
This is the same fix as commit a02b8950d619 ("gpio: pch: use
raw_spinlock_t for the register lock"); this driver shares the same
structure as gpio-pch. |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: fix use-after-free of the socket by its timers
The x25 timers are armed with mod_timer() and cancelled with
timer_delete(), so a pending timer holds no reference on the socket and a
cancel does not wait for a callback already running on another CPU.
x25_heartbeat_expiry() also rearms unconditionally, so it can reinstall
sk->sk_timer after __x25_destroy_socket() has passed its cancel point.
The following __sock_put() frees the socket while the timer is still
queued, and the next expiry uses freed memory. KASAN reports a
slab-use-after-free on the kmalloc-2k object freed by close().
timer_delete_sync() cannot be used here: x25_heartbeat_expiry() and
x25_timer_expiry() both reach the cancels from inside the timer they
would wait on, through __x25_destroy_socket() and x25_disconnect().
Arm the timers with sk_reset_timer() and cancel them with sk_stop_timer()
so that an armed timer owns a reference, and release it in both expiry
handlers. Rearm the heartbeat only while sk_hashed(sk) is still true,
since __x25_destroy_socket() unlinks the socket before dropping it. Arm
the deferred destroy timer the same way and drop its reference in
x25_destroy_timer().
Reproduced on net with KASAN, with the heartbeat period shortened so the
window recurs. With this patch the reproducer no longer triggers a
report and /proc/net/x25 drains.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
NTB: ntb_netdev: Preserve RX queue depth on allocation failure
ntb_netdev_rx_handler() hands the received skb to the network stack
before allocating its replacement. If the allocation fails, nothing is
reposted. Every failure therefore takes one buffer out of the RX queue
while the interface remains up, and enough failures eventually stall
reception.
A retry path could refill the queue later, but ntb_netdev has none.
Allocate the replacement first instead. If that fails, drop the packet
and repost the same skb. This keeps the queue full and lets packet
delivery resume as soon as memory is available again. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Fix advertising data UAFs
hci_find_adv_instance() returns an adv_info pointer that is valid only
while hdev->lock is held. The advertising command-sync paths perform
instance lookups without that lock and, in some cases, retain the pointer
while waiting for a controller response.
An advertising termination event can therefore interleave as follows:
hci_cmd_sync_work hci_rx_work
hci_find_adv_instance()
__hci_cmd_sync_status()
wait for controller reply hci_dev_lock()
hci_remove_adv_instance()
kfree(adv)
adv->scan_rsp_changed = false
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
Write of size 1 at addr ffff88810a45d21d by task kworker/u17:0/88
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
hci_schedule_adv_instance_sync+0x390/0x4c0
hci_cmd_sync_work+0x173/0x300
Allocated by task 87:
hci_add_adv_instance+0x538/0xac0
add_advertising+0x885/0x1160
Freed by task 89:
kfree+0x131/0x3c0
hci_remove_adv_instance+0x1d8/0x3b0
hci_le_ext_adv_term_evt+0x17b/0x730
Protect the instance lookup and payload construction in the extended
advertising, scan response, and periodic advertising data paths. Snapshot
the advertising parameters under hdev->lock, but release the lock before
waiting for the controller.
Clear advertising-data dirty bits before issuing their commands and
restore them after a failure using a fresh lookup. Likewise, update the
reported transmit power through a fresh lookup after the parameter command
completes. No adv_info pointer then survives an HCI command wait. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: sur40 - fix input device registration ordering
In sur40_probe(), input_register_device() was previously called early before
the V4L2 video device and vb2_queue components were fully initialized. If
userspace opened the input device immediately upon registration, sur40_open()
would trigger and start the sur40_poll() worker thread. This worker thread
invokes sur40_process_video() and accesses the uninitialized vb2_queue
structure, leading to a data race and potential system crash.
Furthermore, if V4L2 or video registration failed after input_register_device()
succeeded, the error path fell through to calling input_free_device() on a
successfully registered device instead of input_unregister_device(), corrupting
input core state.
Move input_register_device() to the very end of sur40_probe(). This ensures
the V4L2 and video queue structures are fully initialized before polling can
start, and naturally resolves the error path bug since input_free_device()
is now only called when input registration has not yet occurred.
To maintain strict LIFO (Last-In, First-Out) teardown ordering, also move
input_unregister_device() to the very beginning of sur40_disconnect(). This
guarantees that the input polling worker thread is stopped before V4L2
video components or control handlers are unregistered. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: avoid UAF on sc->tempip in xrep_tempfile_create
LOLLM noticed a potential UAF if the tempfile creation code fails after
it set sc->tempip. Fix that. |
| A flaw was found in acm-search-v2-rhel9. An attacker with administrative privileges on the hub cluster, specifically with patch access to the Search Custom Resource (CR), could exploit a vulnerability in the `Collector.ImageOverride` field. This allows the attacker to deploy an arbitrary container image across all managed clusters. The consequence is remote code execution (RCE), enabling the attacker to execute commands and potentially access sensitive information across the entire fleet of managed clusters. |
| A flaw was found in acm-operator-bundle. The build process for this component downloads and runs a script from a remote source without verifying its authenticity or integrity. This script gains access to sensitive credentials, such as GitHub access tokens and registry passwords, used in the build environment. A remote attacker could exploit this vulnerability to inject malicious code, leading to unauthorized access to build resources and potential compromise of the resulting operator bundle. |
| Download of code without integrity check, inclusion of functionality from untrusted control sphere, and cleartext
transmission of sensitive information vulnerability in Ozols Grupa OZOLS
on Windows caused by an abandoned auto-update domain. Affected
component: the automatic update channel - OzolsSQL client update path, the <db>_update SQL Server Agent job (@subsystem = N'ActiveScripting') and serv_update.vbs.
This issue affects OZOLS: before 1.1.1233. |
| Kernel software installed and running inside a Guest VM may post improper commands to the GPU Firmware to trigger a write of data outside the Guest's virtualised GPU memory.
Software installed and run under a Guest VM can send commands to the GPU which result in out of bounds memory accesses. These can be used to escalate privileges. |
| Tor before 0.4.9.10 did not reject a CONFLUX_LINK cell that arrives on a circuit which already has attached streams. A malicious client could send a RELAY_COMMAND_BEGIN before the CONFLUX_LINK on the same circuit, attaching an exit stream that would later end up orphan leaving a dangling circuit back-pointer and a use-after-free (UAF) when the circuit is freed. This is TROVE-2026-025. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to execute arbitrary code due to improper validation of an attacker-controlled pointer. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 has a pointer validation flaw exists in the AIX Virtual SCSI (vSCSI) initiator driver. Successful exploitation may result in denial of service, privilege escalation, or full compromise of the client LPAR kernel. |
| Use after free in DOM in Google Chrome prior to 151.0.7922.173 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
