| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use after free in Views in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Critical) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/hyperv: validate VMBus packet size in receive callback
hyperv_receive_sub() reads msg->vid_hdr.type and dispatches into one
of four message-type branches without knowing how many bytes the host
wrote into hv->recv_buf. The completion path then runs
memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE), so the consumer that
wakes on wait_for_completion_timeout() can read up to 16 KiB of
residue from a prior message as if it were the response payload.
Pass bytes_recvd into hyperv_receive_sub() and reject any packet that
does not cover the pipe + synthvid header. A single switch on
msg->vid_hdr.type then computes the type-specific payload size: the
three completion-driving types (SYNTHVID_VERSION_RESPONSE,
SYNTHVID_RESOLUTION_RESPONSE, SYNTHVID_VRAM_LOCATION_ACK) fall through
to a shared exit that requires that size before memcpy/complete, while
SYNTHVID_FEATURE_CHANGE validates its own payload and returns before
reading is_dirt_needed. Unknown types are dropped.
SYNTHVID_RESOLUTION_RESPONSE is variable length: the host fills
resolution_count entries, not the full SYNTHVID_MAX_RESOLUTION_COUNT
array. Validate the fixed prefix first so resolution_count can be
read, bound it against the array, then require only the count-sized
array, so the shorter responses the host actually sends are accepted.
Only run the sub-handler when vmbus_recvpacket() returned success. The
memcpy length is bytes_recvd, which is bounded by VMBUS_MAX_PACKET_SIZE
only on a successful receive; on -ENOBUFS vmbus_recvpacket() instead
reports the required length, which can exceed hv->recv_buf, so copying
bytes_recvd would read and write past the 16 KiB buffers. Gating on the
success return keeps the copy bounded. The nonzero-return path is itself
a malformed-message case and is now logged rather than silently skipped;
channel recovery is not attempted.
Rejected packets are reported via drm_err_ratelimited() rather than
silently dropped, matching the CoCo-hardened pattern in
hv_kvp_onchannelcallback(). |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: sideband: fix ring sg table pages leak
xhci_ring_to_sgtable() allocates a temporary pages array and
uses it to build the returned sg_table with
sg_alloc_table_from_pages().
The error paths free the pages array, but the success path
returns the sg_table without freeing it. This leaks the temporary
array every time a sideband client gets an endpoint or event ring
buffer.
Free the pages array after sg_alloc_table_from_pages() succeeds.
The returned sg_table has its own scatterlist entries and does not
depend on the temporary array after construction. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: cmipci: check snd_ctl_new1() return value
snd_ctl_new1() can return NULL when memory allocation fails.
snd_cmipci_spdif_controls() does not check the return value before
dereferencing kctl->id.device, which can lead to a NULL pointer
dereference.
Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mct_u232: fix missing interrupt-in transfer sanity check
Add the missing sanity check on the size of interrupt-in transfers to
avoid parsing stale or uninitialised slab data (and leaking it to user
space). |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: fix UAF in dma_buf_fd() tracepoint
Once FD_ADD() returns, the fd is live in the file descriptor table
and a thread sharing that table can close() it before DMA_BUF_TRACE()
runs. The close drops the last reference, __fput() frees the dma_buf,
and the tracepoint then dereferences dmabuf to take dmabuf->name_lock
-- slab-use-after-free.
Split FD_ADD() back into get_unused_fd_flags() + fd_install() and
emit the tracepoint between them. While the fdtable slot is reserved
with a NULL file pointer, a racing close() returns -EBADF without
entering __fput(), so the dma_buf stays alive across the trace. Same
approach as commit 2d76319c4cbb ("dma-buf: fix UAF in dma_buf_put()
tracepoint").
This undoes the FD_ADD() conversion done in commit 34dfce523c90
("dma: convert dma_buf_fd() to FD_ADD()"); FD_ADD() has no place to
hook the tracepoint safely. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Fix DMA fence leak in iio_buffer_enqueue_dmabuf()
iio_buffer_enqueue_dmabuf() allocates a struct iio_dma_fence (104 bytes,
kmalloc-128) via kmalloc_obj()+dma_fence_init(), which sets the initial
kref to 1. It then calls dma_resv_add_fence() which takes a second
reference (kref=2), and stores a raw pointer in block->fence.
On the success path the function returns without calling dma_fence_put()
to release the initial reference, so every buffer enqueue permanently
leaks one kmalloc-128 allocation.
The iio_buffer_cleanup() work item only releases the temporary reference
taken during completion signalling by iio_buffer_signal_dmabuf_done();
the initial reference from dma_fence_init() is never released.
With four iio_rwdev instances at 240kHz and 512 samples per buffer,
this produces ~1875 kmalloc-128 allocations per second matching the
observed slab growth exactly. A test with ftrace confirmed that the
dma_fence_destroy event was never triggered.
Fix by calling dma_fence_put() after dma_resv_add_fence(), transferring
ownership of the fence to the DMA reservation object. The DMA fence then
gets properly discarded after being signalled. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: itg3200: fix i2c read into the wrong stack location
itg3200_read_all_channels() takes `__be16 *buf' as a parameter and
fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the
parameter (a pointer), `&buf' is the address of the local pointer
slot on the stack of itg3200_read_all_channels(), not the address
of the caller's scan buffer. The (char *) cast hides the type
mismatch.
i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16)
= 8 bytes into the parameter's stack slot, which is discarded when
the function returns. The caller's scan buffer in
itg3200_trigger_handler() is never written to, so
iio_push_to_buffers_with_timestamp() pushes uninitialised stack
contents to userspace via /dev/iio:deviceX every scan -- both a
functional bug (no actual gyroscope or temperature data is
delivered through the triggered buffer) and an information leak.
The non-buffered read_raw() path is unaffected: it goes through
itg3200_read_reg_s16() which uses `&out' on a local s16 value,
where that is correct.
Drop the spurious `&' so the i2c read writes into the caller's
buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: mediate the implicit connect of TCP fast open sendmsg
sendmsg()/sendto() with MSG_FASTOPEN is a combination of connect(2) and
write(2): it opens the connection in the SYN. apparmor_socket_sendmsg()
only checks AA_MAY_SEND, so a profile that grants send but denies connect
lets a confined task open an outbound TCP/MPTCP connection that connect(2)
would have refused, bypassing connect mediation.
Mediate the implicit connect when MSG_FASTOPEN is set and a destination
is supplied. Add it to apparmor_socket_sendmsg() (not the shared
aa_sock_msg_perm() helper, which recvmsg also uses) and call aa_sk_perm()
directly, mirroring the selinux and tomoyo fixes. sk_is_tcp() does not
cover MPTCP fast open, so the SOCK_STREAM/IPPROTO_MPTCP arm is explicit. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix use-after-free in rawdata dedup loop
aa_replace_profiles() walks ns->rawdata_list to dedup the incoming
policy blob against entries already attached to existing profiles.
Per the kernel-doc on struct aa_loaddata, list membership does not
hold a reference: profiles hold pcount, and when the last pcount
drops, do_ploaddata_rmfs() is queued on a workqueue that takes
ns->lock and removes the entry. Between dropping the last pcount
and the workqueue running, an entry remains on the list with
pcount == 0.
aa_get_profile_loaddata() is an unconditional kref_get() on
pcount, so when the dedup loop hits such an entry, refcount
hardening reports
refcount_t: addition on 0; use-after-free.
inside aa_replace_profiles(), and the poisoned counter then
trips "saturated" and "underflow" warnings on the subsequent
uses of the same loaddata.
Before commit a0b7091c4de4 ("apparmor: fix race on rawdata
dereference") the dedup path used a get_unless_zero-style helper
on a single counter, so the existing "if (tmp)" guard was
meaningful. The split-refcount refactor introduced
aa_get_profile_loaddata(), which has plain kref_get() semantics,
and the guard quietly became a no-op.
Introduce aa_get_profile_loaddata_not0(), matching the existing
_not0 convention used by aa_get_profile_not0(), and use it for
the rawdata_list dedup lookup so dying entries are skipped.
Reproduced on x86_64 with v7.1-rc5 in QEMU+KVM running Ubuntu
24.04 + stress-ng 0.17.06:
stress-ng --apparmor 1 --klog-check --timeout 60s
Without this patch the three refcount_t warnings fire within a
few seconds. With it the same 60 s run is clean. Coverage is a
smoke-test only; a longer soak with CONFIG_KASAN, CONFIG_KCSAN
and CONFIG_PROVE_LOCKING would be welcome from anyone with the
cycles. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate orphan inode entry count
f2fs_recover_orphan_inodes() trusts the orphan block entry_count when
replaying orphan inodes from the checkpoint pack. A corrupted entry_count
larger than F2FS_ORPHANS_PER_BLOCK makes the recovery loop read past the
ino[] array and interpret footer or following data as inode numbers.
On a crafted image, mounting an unpatched kernel can drive orphan recovery
into f2fs_bug_on() and panic the kernel. Validate entry_count before
consuming entries so corrupted checkpoint data fails the mount with
-EFSCORRUPTED and requests fsck instead.
Set ERROR_INCONSISTENT_ORPHAN as well, so the corruption reason can be
recorded in the superblock s_errors[] field. This gives fsck a persistent
hint even though mount-time orphan recovery failure may leave no chance to
persist SBI_NEED_FSCK through a checkpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate compress cache inode only when enabled
F2FS_COMPRESS_INO() uses NM_I(sbi)->max_nid as the synthetic inode
number for the compressed page cache inode. That inode only exists when
the compress_cache mount option is enabled.
When compress_cache is disabled, max_nid is outside the valid inode
range. A corrupted directory entry that points to ino == max_nid should
therefore be rejected by f2fs_check_nid_range(). However, is_meta_ino()
currently treats F2FS_COMPRESS_INO() as a meta inode unconditionally,
so f2fs_iget() bypasses do_read_inode() and its nid range check, and
instantiates a fake internal inode instead.
Gate the compressed cache inode case on COMPRESS_CACHE, matching
f2fs_init_compress_inode(). With compress_cache disabled, ino ==
max_nid now follows the normal inode path and is rejected as an
out-of-range nid. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: atomic: fix UAF issue on f2fs_inode_info.atomic_inode
- ioctl(F2FS_IOC_GARBAGE_COLLECT_RANGE) - shrink
- f2fs_gc
- gc_data_segment
- ra_data_block(cow_inode)
- mapping = F2FS_I(inode)->atomic_inode->i_mapping
: f2fs_is_cow_file(cow_inode) is true
- f2fs_evict_inode(atomic_inode)
- clear_inode_flag(fi->cow_inode, FI_COW_FILE)
- F2FS_I(fi->cow_inode)->atomic_inode = NULL
...
- truncate_inode_pages_final(atomic_inode)
- f2fs_grab_cache_folio(mapping)
: create folio in atomic_inode->mapping
- clear_inode(atomic_inode)
- BUG_ON(atomic_inode->i_data.nrpages)
We need to add a reference on fi->atomic_inode before using its mapping
field during garbage collection, otherwise, it will cause UAF issue. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: bound i_inline_xattr_size for non-inline-xattr inodes
When the flexible_inline_xattr feature is enabled, do_read_inode() loads
the on-disk i_inline_xattr_size unconditionally:
if (f2fs_sb_has_flexible_inline_xattr(sbi))
fi->i_inline_xattr_size = le16_to_cpu(ri->i_inline_xattr_size);
but sanity_check_inode() only range-checks it when the inode also has the
FI_INLINE_XATTR flag set. An inode that carries an inline dentry or inline
data but not FI_INLINE_XATTR -- the normal layout for an inline
directory -- therefore keeps a fully attacker-controlled
i_inline_xattr_size from a crafted image.
get_inline_xattr_addrs() returns that value with no flag gating, so it
feeds the inode geometry:
MAX_INLINE_DATA() = 4 * (CUR_ADDRS_PER_INODE - i_inline_xattr_size - 1)
NR_INLINE_DENTRY() = MAX_INLINE_DATA() * BITS_PER_BYTE / (...)
addrs_per_page() = CUR_ADDRS_PER_INODE - i_inline_xattr_size
A large i_inline_xattr_size drives MAX_INLINE_DATA() and NR_INLINE_DENTRY()
negative, so make_dentry_ptr_inline() sets d->max (int) to a negative
value. The inline directory walk then compares an unsigned long bit_pos
against that negative d->max, which is promoted to a huge unsigned bound,
and reads far past the inline area:
while (bit_pos < d->max) /* fs/f2fs/dir.c */
... test_bit_le(bit_pos, d->bitmap) / d->dentry[bit_pos] ...
Mounting a crafted image and reading such a directory triggers an
out-of-bounds read in f2fs_fill_dentries(); the same underflow also
corrupts ADDRS_PER_INODE for regular files.
Validate i_inline_xattr_size against MAX_INLINE_XATTR_SIZE whenever the
flexible_inline_xattr feature is enabled -- i.e. whenever the value is
loaded from disk and consumed -- and keep the lower MIN_INLINE_XATTR_SIZE
bound gated on inodes that actually carry an inline xattr, so legitimate
inodes with i_inline_xattr_size == 0 are still accepted. |
| In the Linux kernel, the following vulnerability has been resolved:
hdlc_ppp: sync per-proto timers before freeing hdlc state
Each PPP control protocol (LCP/IPCP/IPV6CP) embedded in struct ppp
registers a timer via timer_setup(). That struct ppp is the
hdlc->state allocation, which detach_hdlc_protocol() frees with kfree()
in both teardown paths: unregister_hdlc_device() and the re-attach inside
attach_hdlc_protocol().
The ppp proto never registered a .detach callback, so
detach_hdlc_protocol() performs no timer synchronization before the
kfree(). The only cancel, timer_delete(&proto->timer) in ppp_cp_event(),
is partial (it does not wait for a running callback) and only runs on the
->CLOSED transition; ppp_stop()/ppp_close() do not sync either. A
ppp_timer callback already executing (blocked on ppp->lock) survives the
kfree and then dereferences proto->state / ppp->lock in freed memory,
leading to a use-after-free.
Fix this by adding a .detach helper that calls timer_shutdown_sync() on
every per-proto timer. detach_hdlc_protocol() invokes proto->detach(dev)
before kfree(hdlc->state), so timer_shutdown_sync()
now runs on both free paths.
timer_shutdown_sync() is used instead of timer_delete_sync() because the
keepalive path re-arms the timer through add_timer()/mod_timer() and
shutdown blocks any re-activation during teardown.
Initialize the per-protocol timers in ppp_ioctl() when the protocol is
attached, and remove the now-redundant timer_setup() from ppp_start(), so
that the timers are initialized exactly once at attach time and
ppp_timer_release() never operates on uninitialized timer_list
structures. attach_hdlc_protocol() uses kmalloc() (not kzalloc), so
struct ppp's protos[i].timer is uninitialized garbage until the first
timer_setup(); without this init-at-attach, attaching the PPP protocol
without ever bringing the device up would leave timer_shutdown_sync()
operating on uninitialized memory in .detach. Moving the init out of
ppp_start() (which only runs on NETDEV_UP) into the attach path makes the
initialization unconditional and avoids initializing the same timer_list
twice.
This bug was found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: char: Fix use-after-free on probe error path
rpmsg_chrdev_probe() stores the newly allocated eptdev in the default
endpoint's priv pointer before calling rpmsg_chrdev_eptdev_add(). If
rpmsg_chrdev_eptdev_add() then fails, its error path frees eptdev while
the default endpoint may still dispatch callbacks with the stale priv
pointer.
Avoid publishing eptdev through the default endpoint until
rpmsg_chrdev_eptdev_add() succeeds. Messages received before the priv
pointer is published should be ignored by rpmsg_ept_cb(). Flow-control
updates can hit rpmsg_ept_flow_cb() in the same window, so make both
callbacks return success when priv is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: reset write verifier on deferred writeback errors
nfsd_vfs_write() and nfsd_commit() both call filemap_check_wb_err() to
detect deferred writeback errors, but neither rotates the server's write
verifier (nn->writeverf) when this check fails. Every other
durable-storage-failure path in these functions calls
commit_reset_write_verifier() before returning an error.
The missing rotation means clients holding UNSTABLE write data under the
current verifier will COMMIT, receive the unchanged verifier back, and
conclude their data is durable — silently dropping data that failed
writeback. This violates the UNSTABLE+COMMIT durability contract
(RFC 1813 §3.3.7, RFC 8881 §18.32).
Add commit_reset_write_verifier() calls at both filemap_check_wb_err()
error sites, matching the pattern used by adjacent error paths in the
same functions. The helper already filters -EAGAIN and -ESTALE
internally, so the calls are unconditionally safe. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix out-of-bounds read in smb_check_perm_dacl()
The permission-check ACE walk in smb_check_perm_dacl() validates the ACE
header size and caps sid.num_subauth at SID_MAX_SUB_AUTHORITIES, but it
never checks that ace->size is actually large enough to contain
num_subauth sub-authorities before compare_sids() dereferences them.
CIFS_SID_BASE_SIZE covers the SID header up to but excluding the
sub_auth[] array, and offsetof(struct smb_ace, sid) is the ACE header,
so the existing guards only guarantee the 8-byte SID base, i.e. zero
sub-authorities. compare_sids() then reads ace->sid.sub_auth[i] for
i < min(local_sid->num_subauth, ace->sid.num_subauth). The local
comparison SIDs (sid_everyone, sid_unix_NFS_mode, and the id_to_sid()
result) always have at least one sub-authority, and an attacker controls
the ACE revision and authority bytes (which lie within the in-bounds SID
base), so they can match one of those SIDs and force the sub_auth read.
A crafted ACE with size == 16 and num_subauth >= 1 placed at the tail of
the security descriptor therefore causes a heap out-of-bounds read of up
to SID_MAX_SUB_AUTHORITIES * sizeof(__le32) bytes past the pntsd
allocation. The security descriptor is loaded by ksmbd_vfs_get_sd_xattr()
into a buffer sized exactly to the on-disk data (kzalloc(sd_size) in
ndr_decode_v4_ntacl()), so the read lands past the allocation. The
malformed descriptor can be stored verbatim via SMB2_SET_INFO (the DACL
is not normalised before being written to the security.NTACL xattr) and
the read fires on a subsequent SMB2_CREATE access check, making this
reachable by an authenticated client on a share that uses ACL xattrs.
Add the missing num_subauth-versus-ace_size check, mirroring the
identical guards already present in the sibling parsers parse_dacl() and
smb_inherit_dacl(). |
| In the Linux kernel, the following vulnerability has been resolved:
slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd
When the remoteproc starts in parallel with the NGD driver being probed,
or the remoteproc is already up when the PDR lookup is being registered,
or in the theoretical event that we get an interrupt from the hardware,
these callbacks will operate on uninitialized data. This result in
issues to boot the affected boards.
One such example can be seen in the following fault, where
qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work.
[ 21.858578] ------------[ cut here ]------------
[ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116
...
[ 21.859251] Call trace:
[ 21.859255] __queue_work+0x5e0/0x790 (P)
[ 21.859265] queue_work_on+0x6c/0xf0
[ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl]
[ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl]
[ 21.859318] notifier_call_chain+0xa4/0x230
[ 21.859329] srcu_notifier_call_chain+0x64/0xb8
[ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common]
[ 21.859355] rproc_start+0x130/0x230
[ 21.859367] rproc_boot+0x3d4/0x518
...
Move the enablement of interrupts, and the registration of SSR and PDR
until after the NGD device has been registered.
This could be further refined by moving initialization to the control
driver probe and by removing the platform driver model from the picture. |
| In the Linux kernel, the following vulnerability has been resolved:
locking/rtmutex: Skip remove_waiter() when waiter is not enqueued
syzbot triggered the following splat in remove_waiter() via
FUTEX_CMP_REQUEUE_PI:
KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f]
class_raw_spinlock_constructor
remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561
rt_mutex_start_proxy_lock+0x103/0x120
futex_requeue+0x10e4/0x20d0
__x64_sys_futex+0x34f/0x4d0
task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection,
leaving waiter->task nil, where 3bfdc63936dd ("rtmutex: Use waiter::task instead
of current in remove_waiter()") made this fatal.
Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter()
upon a successfully grabbing the rtmutex. 1a1fb985f2e2 ("futex: Handle early deadlock
return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock()
(where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to
account for try_to_take_rt_mutex(). |
