Export limit exceeded: 413267 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (6688 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-76014 | 1 Busybox | 1 Busybox | 2026-08-25 | 3.3 Low |
| A vulnerability has been found in BusyBox up to 1.30.1. This vulnerability affects unknown code of the file networking/wget.c of the component FEATURE_WGET_TIMEOUT Handler. Such manipulation of the argument -T leads to null pointer dereference. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The name of the patch is 83a40bf7a93c8ac093d33ab452222dd5b9eb57ff. A patch should be applied to remediate this issue. | ||||
| CVE-2026-13213 | 1 Zephyrproject | 1 Zephyr | 2026-08-24 | 5.3 Medium |
| The Hearing Access Service (HAS) GATT server in subsys/bluetooth/audio/has.c installs a connection-callback set unconditionally via BT_CONN_CB_DEFINE, so security_changed() runs for every connection that establishes security even before the application has called bt_has_register(). The service attribute pointers hearing_aid_features_attr, preset_control_point_attr, and active_preset_index_attr remain NULL until bt_has_register() resolves them and sets has.registered. With CONFIG_BT_SETTINGS, settings_set_cb() restores each bonded client's persisted context at boot and unconditionally sets context->flags to BONDED_CLIENT_INIT_FLAGS (non-zero). When a previously bonded peer reconnects and re-establishes security during the startup window before bt_has_register() has been called, security_changed() sees the non-zero flags and schedules notify_work_handler, which calls bt_gatt_is_subscribed() with a still-NULL attribute pointer. That triggers an assertion (__ASSERT(attr, ...) in bt_gatt_is_subscribed()), or a NULL dereference of attr->uuid when assertions are compiled out. The result is a remotely triggerable (Bluetooth, adjacent) crash of the HAS peripheral. Exploitation requires the peer to have previously bonded with the device and to reconnect within the boot-time race window before the application registers the service; a peer that reconnects persistently can prolong the outage. Impact is denial of service only, with no memory corruption or information disclosure. The fix adds an early if (!has.registered) { return; } guard in security_changed(), so no notification work is scheduled until the GATT service is registered and its attribute pointers are valid. | ||||
| CVE-2026-71922 | 1 Draytek | 14 Vigorswitch Fx2120 Firmware, Vigorswitch G1282 Firmware, Vigorswitch G2100 Firmware and 11 more | 2026-08-24 | 7.5 High |
| Multiple DrayTek VigorSwitch models contain a pre-authentication null pointer dereference vulnerability in the setget.cgi interface. The vulnerability is caused by missing validation when the pass field is absent. A remote attacker can trigger this vulnerability via a crafted request to crash the service and cause a denial of service. | ||||
| CVE-2026-71920 | 1 Draytek | 14 Vigorswitch Fx2120 Firmware, Vigorswitch G1282 Firmware, Vigorswitch G2100 Firmware and 11 more | 2026-08-24 | 4.9 Medium |
| Multiple DrayTek VigorSwitch models contain a null pointer dereference vulnerability in the formlogout function. The vulnerability is caused by missing checks for an empty or absent Cookie header before string handling. A remote attacker can trigger this vulnerability via a crafted request to crash the service and cause a denial of service. Exploitation requires valid administrative credentials for the device's web management interface. | ||||
| CVE-2026-78148 | 1 Ggml-org | 1 Llama.cpp | 2026-08-24 | 5.3 Medium |
| A vulnerability was determined in ggml-org llama.cpp bec4772f6. This affects the function rpc_server::graph_compute of the file ggml/src/ggml-rpc/ggml-rpc.cpp of the component ggml-RPC Server. Executing a manipulation can lead to null pointer dereference. The attack may be launched remotely. The pull request to fix this issue awaits acceptance. | ||||
| CVE-2026-16846 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-24 | 6.5 Medium |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to a null pointer dereference. | ||||
| CVE-2026-16829 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-24 | 5.3 Medium |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to a NULL pointer dereference. | ||||
| CVE-2026-72242 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: selinux: avoid sk_socket dereference in selinux_sctp_bind_connect() selinux_sctp_bind_connect() dereferences sk->sk_socket to pass a struct socket * to selinux_socket_bind() and selinux_socket_connect_helper(). However, when the hook is invoked from the ASCONF softirq path (sctp_process_asconf), there is no file reference guaranteeing that sk->sk_socket is non-NULL. The setsockopt callers (bindx, connectx, set_primary, sendmsg connect) hold a file reference and are not affected. Both selinux_socket_bind() and selinux_socket_connect_helper() immediately resolve sock->sk, never using the struct socket * for anything else. Refactor the inner logic into helpers that take a struct sock * directly so that selinux_sctp_bind_connect() never needs to touch sk->sk_socket at all. | ||||
| CVE-2026-68434 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_mid: Fix NULL function pointer dereference on DNV/ICX-D/SNR platforms Commit b1b4efea05a5 ("serial: 8250_mid: Disable DMA for selected platforms") replaced the dnv_board setup and exit callbacks with PTR_IF(false, ...), which evaluates to NULL. However, the three call sites in mid8250_probe() and mid8250_remove() unconditionally dereference these function pointers without NULL checks, causing a NULL pointer dereference (kernel oops) on any Denverton (DNV), Ice Lake Xeon D (ICX-D/CDF), or Snowridge (SNR) platform. Fix this by adding the missing NULL checks before calling the setup and exit callbacks. | ||||
| CVE-2026-64192 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized When CONFIG_BPF_LSM=y is set, BPF inode storage maps (BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However, if the BPF LSM is not explicitly enabled at boot time (e.g. omitted from the "lsm=" boot parameter), lsm_prepare() is never executed for the BPF LSM. Consequently, the BPF inode security blob offset (bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at its default compiled size of 8 bytes instead of being updated to a valid offset past the reserved struct rcu_head (typically 16 bytes or more). When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE map, bpf_inode() evaluates inode->i_security + 8. This erroneously aliases the struct rcu_head.func callback pointer at the beginning of the inode->i_security blob. During subsequent map element cleanup or inode destruction, writing NULL to owner_storage clears the queued RCU callback pointer. When rcu_do_batch() later executes the queued callback, it attempts an instruction fetch at address 0x0, triggering an immediate kernel panic. Fix this by introducing a global bpf_lsm_initialized boolean flag marked with __ro_after_init. Set this flag to true inside bpf_lsm_init() when the LSM framework successfully registers the BPF LSM. Gate map allocation in inode_storage_map_alloc() on this flag, returning -EOPNOTSUPP if the BPF LSM is in turn uninitialized. This fail-fast approach prevents userspace from allocating inode storage maps when the supporting BPF LSM infrastructure is absent, avoiding zombie map states. | ||||
| CVE-2024-40973 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: mtk-vcodec: potential null pointer deference in SCP The return value of devm_kzalloc() needs to be checked to avoid NULL pointer deference. This is similar to CVE-2022-3113. | ||||
| CVE-2026-74706 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnge: Fix NULL pointer dereference in aux device release If allocation of auxr_dev fails during auxiliary device setup, the error path calls auxiliary_device_uninit(), which eventually invokes bnge_aux_dev_release(). The release callback unconditionally dereferences aux_priv->auxr_dev->pdev to retrieve the parent bnge_dev. Since auxr_dev has not yet been allocated on this failure path, the dereference results in a NULL pointer exception Retrieve the parent bnge_dev from the auxiliary device's parent instead of auxr_dev, and free auxr_dev only when it was successfully allocated. This allows the release callback to correctly clean up partially initialized auxiliary devices. | ||||
| CVE-2026-74654 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_dma: Clear stale RX state on shutdown serial8250_release_dma() terminates RX DMA and releases the channel, but leaves rx_running set. If the port is closed while an RX transfer is active, the stale state remains while rxchan is NULL until the channel is requested again on the next open. The DesignWare BUSY workaround added by commit a7b9ce39fbe4 ("serial: 8250_dw: Ensure BUSY is deasserted") calls serial8250_rx_dma_flush() from the LCR write path during startup. This happens before serial8250_request_dma() obtains a new RX channel. On reopen, the stale rx_running state therefore makes the flush path pass a NULL channel to dmaengine_pause(), causing a kernel Oops. Clear rx_running after terminating RX DMA, matching the TX cleanup. Also make the flush helper return if the DMA object or RX channel is not available so startup and teardown paths cannot pass a NULL channel to the DMAengine API. | ||||
| CVE-2026-74633 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix NULL pointer dereference in module event cache removal A module-only event filter such as ":mod:foo" is cached with a NULL event_mod->match when foo has not been loaded. If a later write tries to remove a specific match from the same module, remove_cache_mod() passes the NULL cached match to strcmp(), causing a NULL pointer dereference. The issue can be reproduced from userspace: echo ':mod:trace_events_kunit_missing' > /sys/kernel/tracing/set_event echo '!foo_bar:mod:trace_events_kunit_missing' >> /sys/kernel/tracing/set_event The second write must be a concatenation (">>") to not include O_TRUNC as that would cause ftrace_clear_events() to clear the cached modules lines. The crash was reproduced on x86_64 QEMU while KUnit workers contended on the event tracing path: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode RIP: 0010:strcmp+0x10/0x30 Call Trace: __ftrace_set_clr_event_nolock+0x373/0x4a0 ftrace_set_clr_event+0xf0/0x180 ftrace_event_write+0xdf/0x110 vfs_write+0xf6/0x440 ksys_write+0x68/0xe0 do_syscall_64+0xf9/0x540 entry_SYSCALL_64_after_hwframe+0x77/0x7f Check event_mod->match before comparing it, consistent with the existing NULL checks for the cached system and event fields. The mismatched removal continues to return -EINVAL; a broad cached module filter is removed with "!:mod:<module>". | ||||
| CVE-2026-72257 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6apm: fix NULL pointer dereference in graph_callback When q6apm_free_fragments() is called it frees rx_data.buf/tx_data.buf and sets them to NULL under graph->lock. A late DSP buffer-done response can race with this: graph_callback() passes the !graph->ar_graph guard (not yet NULL), acquires the lock, but then dereferences a now-NULL buf pointer to read buf[token].phys, crashing at virtual address 0x10. Add a NULL check for buf inside the mutex-protected section in both the write-done (DATA_CMD_RSP_WR_SH_MEM_EP_DATA_BUFFER_DONE_V2) and read-done (DATA_CMD_RSP_RD_SH_MEM_EP_DATA_BUFFER_V2) handlers and bail out cleanly if buffers have already been freed. This problem is only shown up recently while apr bus was updated to process the commands per service rather from single global queue. | ||||
| CVE-2026-72453 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regcache: Do not overwrite error code when finalizing cache after error During regcache initialization, if an error occurs in the cache_ops->populate callback, and if cache operations include an exit callback, the error code from populate() is overwritten with the return value from exit(). This hides the error condition from the caller of regcache_init(), and can cause NULL pointer dereferences when the regcache is later accessed. | ||||
| CVE-2026-72468 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Initialize re_id before removal registration rpcrdma_create_id() registers ep->re_rn with the rpcrdma ib_client before returning the new rdma_cm_id to rpcrdma_ep_create(). However rpcrdma_ep_create() currently stores that pointer in ep->re_id only after rpcrdma_create_id() returns. A local administrator can race an NFS/RDMA mount against RDMA device removal. If rpcrdma_remove_one() observes the just-registered notification before rpcrdma_ep_create() assigns ep->re_id, rpcrdma_ep_removal_done() calls trace_xprtrdma_device_removal(NULL). The tracepoint dereferences id->device->name and copies id->route.addr.dst_addr, so the callback can crash the kernel with a NULL pointer dereference. Store the rdma_cm_id in ep->re_id immediately before publishing ep->re_rn. The existing error path still destroys the id directly if registration fails; ep is then freed by the caller without using ep->re_id. Remove the later duplicate assignment in rpcrdma_ep_create(). | ||||
| CVE-2026-74342 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kernfs: link kn to its parent before the LSM init hook After commit 12e9e3cd03b5 ("simpe_xattr: use per-sb cache"), kernfs_xattr_set() and kernfs_xattr_get() compute the cache via kernfs_root(kn) before any other check. kernfs_root(kn) walks kn->__parent first and falls back to kn->dir.root, both of which are NULL on a freshly kmem_cache_zalloc()'d kn. kn->__parent was being set in kernfs_new_node() after __kernfs_new_node() returned, and kn->dir.root is set even later by kernfs_create_dir_ns() / kernfs_create_empty_dir(). The LSM kernfs_init_security hook is invoked from inside __kernfs_new_node(), before either field has been initialized. selinux_kernfs_init_security() ends with kernfs_xattr_set(kn, XATTR_NAME_SELINUX, ...). kernfs_root(kn) then returns NULL, and &((struct kernfs_root *)NULL)->xa_cache evaluates to offsetof(struct kernfs_root, xa_cache) which faults: BUG: kernel NULL pointer dereference, address: 00000000000000e0 RIP: 0010:simple_xattr_set+0x27/0x8b0 Call Trace: kernfs_xattr_set+0x63/0xb0 selinux_kernfs_init_security+0x13b/0x270 security_kernfs_init_security+0x36/0xc0 __kernfs_new_node+0x182/0x290 kernfs_new_node+0x80/0xc0 kernfs_create_dir_ns+0x2b/0xa0 cgroup_create+0x116/0x380 cgroup_mkdir+0x7c/0x1a0 Reproduces deterministically at PID 1 (systemd) on an SELinux-enabled distro. The first cgroup mkdir under /sys/fs/cgroup with a labelled parent panics the kernel. The LSM hook's contract is that the kn_dir argument is the parent of the new kn, so kn->__parent should already point at kn_dir when the hook runs. Move kernfs_get(parent) and rcu_assign_pointer of kn->__parent from kernfs_new_node() into __kernfs_new_node() right before the security hook, and unwind the parent reference on the err_out4 path. kernfs_root(kn) then takes its parent branch during the hook and returns parent->dir.root, which is the correct root. This also closes the same-shape latent bug in kernfs_xattr_get() (which today is hidden only by kernfs_iattrs_noalloc() returning NULL on a fresh kn). | ||||
| CVE-2026-48756 | 1 Lxc | 1 Incus | 2026-08-21 | N/A |
| Incus is a system container and virtual machine manager. Prior to version 7.1.0, `(*backend).CreateCustomVolumeFromBackup` in `internal/server/storage/backend.go` contains an unguarded `*time.Time` dereference on the `ExpiresAt` field of every volume-snapshot entry in an imported custom-volume backup. An authenticated user with `can_create_storage_volumes` permission on any project can crash the `incusd` daemon by uploading a backup tarball whose `volume_snapshots[*].expires_at` field is absent. This is a sibling-field variant of GHSA-r7w7-mmxr-47r9 (CVE-2026-40197). Commit `985a1dedf9f3e7ba729c93b654905ed510de25c2` added `if s == nil` at the top of the loop body, but did not guard the adjacent `*snapshot.ExpiresAt` deref 19 lines later. Every other consumer of `Config.VolumeSnapshots[i].ExpiresAt` in this same file already gates the deref with a nil-check — the asymmetric guard is the bug. Version 7.1.0 contains an updated patch. | ||||
| CVE-2026-74477 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: uprobes: Fix NULL pointer dereference in hprobe_expire() Forking a task that has a pending uretprobe can oops the kernel with a NULL pointer dereference in the clone() path: BUG: kernel NULL pointer dereference, address: 0000000000000018 Oops: 0002 [#1] SMP NOPTI RIP: 0010:hprobe_expire CR2: 0000000000000018 Call Trace: uprobe_copy_process copy_process kernel_clone __x64_sys_clone do_syscall_64 entry_SYSCALL_64_after_hwframe This was found on real hosts on Meta fleet. I've got the impression that this is what is happening: CPU 1 CPU 2 (traced task) ----- ------------------- hit uprobe, prepare_uretprobe(): hprobe LEASED, refcount >= 1 uprobe_unregister() put_uprobe(): refcount -> 0 fork() -> dup_utask() hprobe_expire(hprobe, true) try_get_uprobe() -> NULL get_uprobe(NULL) <-- Oops Only take the extra reference when the uprobe is non-NULL; a NULL means it is gone and is the correct value to return. | ||||