| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A NULL pointer dereference in the AMF NGAP Dispatcher component of free5gc v4.0.1 allows attackers to cause a Denial of Service (DoS) via supplying crafted NGAP messages during the initialization of a new RAN connection. |
| Substance3D - Designer is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| A null pointer dereference was addressed with improved input validation. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5. An app may be able to cause unexpected system termination. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: fix NULL dereference when killing missing key
ovpn_crypto_kill_key assumes both crypto slots are populated and
dereferences each slot before checking it. That is not guaranteed: a
peer can have only one installed key, and the kill path may be asked to
remove a key that is not present.
Read each slot once while holding the crypto state lock, check for NULL
before looking at key_id, and only replace the slot that actually
matches. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ngbe: fix NULL pointer dereference in non-MSI-X interrupt enabling
In non-MSI-X mode (such as legacy INTx or single MSI), wx->msix_entry is
not allocated or initialized. Calling NGBE_INTR_MISC(wx) dereferences
wx->msix_entry->entry, leading to a NULL pointer dereference crash.
This issue was introduced by fixing the IRQ vector when the number of
VFs is 7. Fix the issue by explicitly checking `pdev->msix_enabled` to
determine the correct vector index.
Additionally, as a side fix, set the interrupt mask to BIT(0) for the
non-MSI-X fallback. In MSI/INTx mode, the MISC and queue interrupts
share vector 0, and the WX_PX_MISC_IVAR register is only valid in the
MSI-X case. Thus, BIT(0) is the correct mask for the miscellaneous cause
when MSI-X is disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: skip zero-sized firmware sections
panthor_fw_load_section_entry() skips BO creation when the firmware section
VA range is empty. If such a section is added to the firmware section list,
section->mem is left as NULL.
Later reload and unplug paths iterate over all firmware sections and
dereference section->mem, which can lead to a NULL pointer dereference.
Zero-sized firmware sections are valid, so accept them as no-op entries but
skip adding them to the section list. |
| Incus is a system container and virtual machine manager. Prior to version 7.1.0, `(*backend).createDependentVolumesFromBackup` in `internal/server/storage/backend.go` contains a cluster of unguarded pointer derefs on every dependent-volume entry's `VolumeSnapshots[i]`, `Volume`, and `Pool` sub-fields. An authenticated user with `can_create_instances` permission on any project can crash the `incusd` daemon by uploading an instance backup tarball whose `dependent_volumes[*]` block contains a nil snapshot pointer (or omits `volume:` / `pool:`). This is a sibling-field variant of the 2026-05-04 batch fix `d768f81c0a1d985f35ae56219519822b080bf5e3` ("Properly check dependent volumes on import"). That commit added `if disk == nil` at the top of the outer loop, but did not guard the four sub-pointer fields the loop body dereferences naked. Version 7.1.0 contains an updated patch. |
| A NULL Pointer Dereference vulnerability in the management daemon (mgd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, high-privileged attacker setting or deactivating a specific SSH configuration parameter to create a Denial of Service (DoS).
A local high-privileged user configuring or deactivating a specific 'system services ssh' configuration parameter can exploit a null pointer dereference in one of the functions used by SSH. The function attempts to dereference a null pointer when accessing certain configuration data, resulting in an mgd process crash and restart. Continued execution of these configuration commands will create a sustained Denial of Service (DoS) condition.
This issue affects:
Junos OS:
* from 22.3 before 22.3R3-S5;
* from 22.4 before 22.4R3-S10;
* from 23.2 before 23.2R2-S7;
* from 23.4 before 23.4R2-S8.
This issue does not affect Junos OS before 22.3R1.
Junos OS Evolved:
* from 22.3R1-EVO before 23.2R2-S7-EVO;
* from 23.4 before 23.4R2-S8-EVO.
This issue does not affect Junos OS Evolved before 22.3R1-EVO. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't walk off the end of a null sc->sa.agi_bp in AGI repair
LOLLM noticed a longstanding bug where xrep_iunlink_walk_ondisk_bucket
tries to walk ragi->sc->sa.agi_bp to rebuild the unlinked inode lists.
Unfortunately, it's possible for agi_bp to be null if the buffer
verifier fails, so we have to use ragi->agi_bp (which skips verifier
checks) instead. |
| In the Linux kernel, the following vulnerability has been resolved:
regmap: sdw-mbq: don't call an unset readable_reg callback
regmap_sdw_mbq_poll_busy() decides whether to poll the Function Busy bit
by calling ctx->readable_reg(), which is a straight copy of
config->readable_reg. That callback is optional: regmap_readable() treats
a NULL ->readable_reg as "every register is readable", and drivers rely on
that. es9356 and tac5xx2-sdw both build an MBQ regmap without one.
Since commit ca1b11b36d82 ("regmap: sdw-mbq: Allow defers on undeferrable
controls") the poll runs on every -ENODATA, not only for Controls the
driver marked deferrable, so any of those devices answering
COMMAND_IGNORED takes the kernel through a NULL function pointer.
Treat a missing callback the way the rest of regmap does and poll. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix NULL dereference due to missing ptp adjfine
Fix NULL dereference due to missing implementation of adjfine, which can
be triggered from usermode as follows:
sudo ./testptp -d /dev/ptp0 -f 0
[ 551.943697] BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
[ 552.061946] Call Trace:
[ 552.064487] <TASK>
[ 552.066681] ptp_clock_adjtime+0x1c0/0x2c0
[ 552.070874] ? get_clock_desc+0x6b/0xb0
[ 552.074825] pc_clock_adjtime+0x78/0xc0
[ 552.078755] __do_sys_clock_adjtime+0x85/0x110
[ 552.083293] do_syscall_64+0xea/0x610 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL pointer dereference in amdgpu_dm_crtc_set_vblank()
amdgpu_dm_crtc_set_vblank() dereferences acrtc_state->stream when
vblank is enabled/queried from DRM_IOCTL_MODE_CRTC_GET_SEQUENCE before
a stream is attached to it.
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: amdgpu_dm_crtc_set_vblank+0x6b/0x4d0 [amdgpu]
Call Trace:
drm_vblank_enable
drm_vblank_get
drm_crtc_get_sequence_ioctl
drm_ioctl_kernel
drm_ioctl
Reproduced by running VKCTS with WSI tests enabled on RADV.
Guard the enable path on acrtc_state->stream being non-NULL, matching
the existing checks in this function.
(cherry picked from commit 7b1b31bf6942e6f43509b48da23f8e27269aac39) |
| OpenEXR is the reference implementation and specification for the EXR high-dynamic-range image file format, widely used in the motion picture industry. Versions 3.4.0 through 3.4.12 contain a NULL pointer dereference in the OpenEXRCore function exr_attr_set_bytes(). The public setter validates the top-level exr_attr_bytes_t value pointer but does not verify that the nested type_hint pointer is non-NULL when hint_length is greater than zero. When a caller supplies a positive hint_length together with a NULL type_hint, exr_attr_bytes_create() allocates a destination type-hint buffer and then copies from the NULL source pointer, causing a deterministic crash. The flaw is reachable through the public OpenEXRCore C API and results in a denial of service. The issue is fixed in version 3.4.13. |
| The OCPP 1.6 client in subsys/net/lib/ocpp/ocpp.c reconstructs a session handle and PDU id from the uid field of a CALLRESULT message. In ocpp_process_server_msg() the code calls atoi(strtok_r(uid, "-", &tmp)) without checking the strtok_r return value. When the server-supplied uid is empty or contains no - delimiter, strtok_r() returns NULL and atoi(NULL) dereferences a NULL pointer, which is undefined behaviour.
The uid originates from network data: parse_rpc_msg() in subsys/net/lib/ocpp/ocpp_j.c JSON-parses a frame received from the OCPP central system over TCP/WebSocket and copies the server-controlled string into the local buffer. A malicious or compromised central system, or a man-in-the-middle on a non-TLS ws:// connection, can return a malformed uid to reach the defect. No authentication beyond the existing server connection (or MITM position) is required, and the reconstructed pointer is membership-validated by ocpp_session_is_valid(), so the impact is limited to the NULL dereference rather than arbitrary pointer use.
On Zephyr targets that trap access to address 0 (MMU/MPU platforms or CONFIG_NULL_POINTER_EXCEPTION_DETECTION), the dereference faults inside the OCPP reader thread and invokes the fatal handler, producing a remote denial of service of the charge point; on bare targets where address 0 is readable the call returns 0 and is benign, so the impact is availability-only and platform-conditional.
The applied fix guards only the first atoi(); the second strtok_r(NULL, "-", &tmp) followed by pdu = atoi(buf) in the same function remains unguarded and the identical NULL dereference is still reachable from the same network input when the uid has a first token but no second --delimited token. A complete fix should validate the second token as well. |
| rclone before v1.75.0 contains a denial of service vulnerability in the WebDAV TUS creation handler that dereferences a nil response before checking for transport errors. A malicious or compromised configured endpoint can reset connections during TUS uploads to trigger a panic that terminates unrecovered goroutines and halts unrelated work in long-lived processes. |
| Libevent is an event notification library. Prior to 2.2.2-alpha, libevent can dereference invalid list pointers in ws.c when evws_new_session enters its error path after evhttp_start_ws_ succeeds but bufferevent_enable_locking_ fails. evws_connection_free sees a non-null http_server and unconditionally calls TAILQ_REMOVE even though the session was never inserted into http_server->ws_sessions. A local caller able to induce this allocation or locking failure can crash the process. This issue is fixed in version 2.2.2-alpha. |
| kin-openapi is a Go project for handling OpenAPI files. From 0.10.0 until 0.141.0, openapi3filter.convertParseError in openapi3filter/validation_error_encoder.go dereferences e.Parameter.In without checking whether e.Parameter is nil. A malformed non-string scalar field in a multipart/form-data request body produces a nested ParseError with a nil RequestError.Parameter, and applications that render the validation error through openapi3filter.ConvertErrors or ValidationErrorEncoder panic. An unauthenticated client can repeatedly send such requests to deny service when the application lacks a recovery boundary. JSON request bodies and applications that do not use these error-rendering helpers are not affected. This issue is fixed in version 0.141.0. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to cause a denial of service due to a NULL pointer dereference. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to a NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-scsi: reject feature changes after endpoint
vhost_scsi_setup_vq_cmds() runs from VHOST_SCSI_SET_ENDPOINT and allocates
each command's protection scatterlist array (prot_sgl) according to the
acknowledged VIRTIO_SCSI_F_T10_PI bit. The command pools are not rebuilt
when VHOST_SET_FEATURES changes that bit later.
Although virtio feature bits must not change after feature negotiation,
vhost_scsi_set_features() currently accepts such a request after the
endpoint is active and updates acked_features. Enabling T10-PI after
endpoint setup therefore leaves prot_sgl NULL while the I/O path follows
the new feature bit.
For a 129-page protection payload, vhost_scsi_mapal() passes the missing
first chunk to sg_alloc_table_chained():
sg_alloc_table_chained(table, 129, first_chunk=NULL,
nents_first_chunk=inline_sg_cnt)
sg_pool_index() then hits:
BUG_ON(nents > SG_CHUNK_SIZE); /* 129 > 128 */
The kernel reported the following call trace and register state:
Call Trace:
<TASK>
? __sg_alloc_table+0x1d8/0x250
? __pfx_vhost_run_work_list+0x10/0x10 [vhost]
sg_alloc_table_chained+0x59/0xf0
? __pfx_sg_pool_alloc+0x10/0x10
? vhost_scsi_calc_sgls.constprop.0+0x43/0x60 [vhost_scsi]
vhost_scsi_handle_vq+0xf02/0x1700 [vhost_scsi]
? __pfx_vhost_scsi_handle_vq+0x10/0x10 [vhost_scsi]
vhost_scsi_handle_kick+0x37/0x50 [vhost_scsi]
vhost_run_work_list+0x8e/0xd0 [vhost]
vhost_task_fn+0xe1/0x210
ret_from_fork+0x348/0x540
</TASK>
RIP: 0010:0x4
CR2 = 0x4
RSP: 0018:ffffc90000dbf940 EFLAGS: 00010202
RAX: ffffffff82396810 RBX: ffff88811dc28b80 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000081
VHOST_F_LOG_ALL is a vhost-specific runtime feature and remains the only
exception.
Reject changes to any feature other than VHOST_F_LOG_ALL while the
endpoint is active. This preserves the existing runtime log toggle while
preventing feature-dependent command resources and data-path state from
becoming inconsistent. Userspace must clear the endpoint before changing
any other negotiated feature and set the endpoint up again afterward. |
