| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Ratify is a verification engine as a binary executable and on Kubernetes which enables verification of artifact security metadata and admits for deployment only those that comply with policies the user creates. In a Kubernetes environment, Ratify can be configured to authenticate to a private Azure Container Registry (ACR). The Azure workload identity and Azure managed identity authentication providers are configured in this setup. Users that configure a private ACR to be used with the Azure authentication providers may be impacted by a vulnerability that exists in versions prior to 1.2.3 and 1.3.2. Both Azure authentication providers attempt to exchange an Entra ID (EID) token for an ACR refresh token. However, Ratify’s Azure authentication providers did not verify that the target registry is an ACR. This could have led to the EID token being presented to a non-ACR registry during token exchange. EID tokens with ACR access can potentially be extracted and abused if a user workload contains an image reference to a malicious registry. As of versions 1.2.3 and 1.3.2, the Azure workload identity and Azure managed identity authentication providers are updated to add new validation prior to EID token exchange. Validation relies upon registry domain validation against a pre-configured list of well-known ACR endpoints. EID token exchange will be executed only if at least one of the configured well-known domain suffixes (wildcard support included) matches the registry domain of the image reference. |
| Milvus is an open-source vector database built for generative AI applications. An unauthenticated attacker can exploit a vulnerability in versions prior to 2.4.24, 2.5.21, and 2.6.5 to bypass all authentication mechanisms in the Milvus Proxy component, gaining full administrative access to the Milvus cluster. This grants the attacker the ability to read, modify, or delete data, and to perform privileged administrative operations such as database or collection management. This issue has been fixed in Milvus 2.4.24, 2.5.21, and 2.6.5. If immediate upgrade is not possible, a temporary mitigation can be applied by removing the sourceID header from all incoming requests at the gateway, API gateway, or load balancer level before they reach the Milvus Proxy. This prevents attackers from exploiting the authentication bypass behavior. |
| Wazuh is a security detection, visibility, and compliance open source project. From version 4.9.0 to before 4.13.0, the Wazuh API – Agent Configuration in certain configurations allows authenticated users with read-only API roles to retrieve agent enrollment credentials through the /utils/configuration endpoint. These credentials can be used to register new agents within the same Wazuh tenant without requiring elevated permissions through the UI. This issue has been patched in version 4.13.0. |
| External Secrets Operator is a Kubernetes operator that integrates external secret management systems. From version 0.15.0 to before 0.19.2, a vulnerability was discovered where the List() calls for Kubernetes Secret and SecretStore resources performed by the PushSecret controller did not apply a namespace selector. This flaw allowed an attacker to use label selectors to list and read secrets/secret-stores across the cluster, bypassing intended namespace restrictions. An attacker with the ability to create or update PushSecret resources and control SecretStore configurations could exploit this vulnerability to exfiltrate sensitive data from arbitrary namespaces. This could lead to full disclosure of Kubernetes secrets, including credentials, tokens, and other sensitive information stored in the cluster. This vulnerability has been patched in version 0.19.2. A workaround for this issue includes auditing and restricting RBAC permissions so that only trusted service accounts can create or update PushSecret and SecretStore resources. |
| A vulnerability was found in jack0240 魏 bskms 蓝天幼儿园管理系统 up to dffe6640b5b54d8e29da6f060e0493fea74b3fad. It has been rated as critical. Affected by this issue is some unknown functionality of the file /sa/addUser of the component User Creation Handler. The manipulation leads to improper authorization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. |
| An issue in the permission verification module and organization/application editing interface in Casdoor v2.26.0 and before, and fixed in v.2.63.0, allows remote authenticated administrators of any organization within the system to bypass the system's permission verification mechanism by directly concatenating URLs after login |
| Control Panel provides an API for pre-registering into an enrollment and organization prior to a user's first login. The API for creating users checks that the account requesting a user creation has `edit` on the enrollment-level user directory, but is missing a separate check that the enrollment editor has access (or belongs to) the organization that they are adding a user to. |
| Apollo Router Core is a configurable Rust graph router written to run a federated supergraph using Apollo Federation 2. Versions 1.61.12-rc.0 and below and 2.8.1-rc.0 allow unauthorized access to protected data through schema elements with access control directives (@authenticated, @requiresScopes, and @policy) that were renamed via @link imports. Router did not enforce renamed access control directives on schema elements (e.g. fields and types), allowing queries to bypass those element-level access controls. This issue is fixed in versions 1.61.12 and 2.8.1. |
| (conda) Constructor is a tool that enables users to create installers for conda package collections. In versions 3.12.2 and below, the installation directory inherits permissions from its parent directory. Outside of restricted directories, the permissions are very permissive and often allow write access by authenticated users. Any logged in user can make modifications during the installation for both single-user and all-user installations. This constitutes a local attack vector if the installation is in a directory local users have access to. For single-user installations in a shared directory, these permissions persist after the installation. This issue is fixed in version 3.13.0. |
| Karapace is an open-source implementation of Kafka REST and Schema Registry. Versions 5.0.0 and 5.0.1 contain an authentication bypass vulnerability when configured to use OAuth 2.0 Bearer Token authentication. If a request is sent without an Authorization header, the token validation logic is skipped entirely, allowing an unauthenticated user to read and write to Schema Registry endpoints that should otherwise be protected. This effectively renders the OAuth authentication mechanism ineffective. This issue is fixed in version 5.0.2. |
| Apollo Router Core is a configurable graph router written in Rust to run a federated supergraph using Apollo Federation 2. In versions 1.61.11 below, as well as 2.0.0-alpha.0 through 2.8.1-rc.0, a vulnerability allowed for unauthenticated queries to access data that required additional access controls. Router incorrectly handled access control directives on interface types/fields and their implementing object types/fields, applying them to interface types/fields while ignoring directives on their implementing object types/fields when all implementations had the same requirements. Apollo Router customers defining @authenticated, @requiresScopes, or @policy directives inconsistently on polymorphic types (i.e., object types that implement interface types) are impacted. This issue is fixed in versions 1.61.12 and 2.8.1. |
| Anyquery is an SQL query engine built on top of SQLite. Versions 0.4.3 and below allow attackers who have already gained access to localhost, even with low privileges, to use the http server through the port unauthenticated, and access private integration data like emails, without any warning of a foreign login from the provider. This issue is fixed in version 0.4.4. |
| Permission vulnerability in the mobile application (com.afmobi.boomplayer) may lead to the risk of unauthorized operation. |
| CWE-282 "Improper Ownership Management" in GE Vernova EnerVista UR Setup allows Authentication Bypass.
The software's startup authentication can be disabled by altering a Windows registry setting that any user can modify. |
| The PeproDev Ultimate Profile Solutions plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the handel_ajax_req() function in versions 1.9.1 to 7.5.2. This makes it possible for unauthenticated attackers to update arbitrary user's metadata which can be leveraged to block an administrator from accessing their site when wp_capabilities is set to 0. |
| An Improper Access Control could allow a malicious actor authenticated in the API of certain UniFi Connect Display Cast devices to make unsupported changes to the system.
Affected Products:
UniFi Connect Display Cast (Version 1.10.3 and earlier)
UniFi Connect Display Cast Pro (Version 1.0.89 and earlier)
UniFi Connect Display Cast Lite (Version 1.0.3 and earlier)
Mitigation:
Update UniFi Connect Display Cast to Version 1.10.7 or later
Update UniFi Connect Display Cast Pro to Version 1.0.94 or later
Update UniFi Connect Display Cast Lite to Version 1.1.8 or later |
| Salt contains an authentication protocol version downgrade weakness that can allow a malicious minion to bypass newer authentication/security features by using an older request payload format, enabling minion impersonation and circumventing protections introduced in response to prior issues. |
| The Frontend Dashboard plugin for WordPress is vulnerable to Privilege Escalation due to a missing capability check on the fed_wp_ajax_fed_login_form_post() function in versions 1.0 to 2.2.6. This makes it possible for unauthenticated attackers to reset the administrator’s email and password, and elevate their privileges to that of an administrator. |
| pwn.college DOJO is an education platform for learning cybersecurity. Prior to commit 467db0b9ea0d9a929dc89b41f6eb59f7cfc68bef, the /workspace endpoint contains an improper authentication vulnerability that allows an attacker to access any active Windows VM without proper authorization. The vulnerability occurs in the view_desktop function where the user is retrieved via a URL parameter without verifying that the requester has administrative privileges. An attacker can supply any user ID and arbitrary password in the request parameters to impersonate another user. When requesting a Windows desktop service, the function does not validate the supplied password before generating access credentials, allowing the attacker to obtain an iframe source URL that grants full access to the target user's Windows VM. This impacts all users with active Windows VMs, as an attacker can access and modify data on the Windows machine and in the home directory of the associated Linux machine via the Z: drive. This issue has been patched in commit 467db0b9ea0d9a929dc89b41f6eb59f7cfc68bef. No known workarounds exist. |
| Incorrect access control in the Web management interface in Each Italy Wireless Mini Router WIRELESS-N 300M v28K.MiniRouter.20190211 allows attackers to arbitrarily change the administrator username and password via sending a crafted GET request. |
