| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: ssd1307fb: defer I2C transfers from damage callbacks
The fbdev damage callbacks may run from fbcon while printk has disabled
preemption. They currently update the display synchronously, which enters
the sleeping I2C transfer path from atomic context.
A complete report from an RK3566 system follows:
[ 258.129004] watchdog: watchdog0: watchdog did not stop!
[ 258.129067] BUG: scheduling while atomic: systemd/1/0x00000003
[ 258.129076] Modules linked in: algif_hash algif_skcipher af_alg bnep
binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart
fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card
motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1
ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb
brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm
snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine
v4l2_vp9 snd_pcm v4l2_h264 rockchip_rga snd_timer rk_crypto2
spi_rockchip_sfc videobuf2_dma_contig snd sm3_generic v4l2_mem2mem
videobuf2_dma_sg dwmac_rk sm3 soundcore videobuf2_memops videobuf2_v4l2
stmmac_platform dw_hdmi_cec videodev videobuf2_common dw_hdmi_i2s_audio
stmmac rk817_charger pcs_xpcs mc cpufreq_dt sch_fq_codel ip_tables
x_tables autofs4
[ 258.129215] Preemption disabled at:
[ 258.129216] [<ffff80008012f96c>] vprintk_emit+0x11c/0x340
[ 258.129234] CPU: 0 PID: 1 Comm: systemd Tainted: G C
6.6.0-rc5-rockchip-rk356x #4
[ 258.129239] Hardware name: Rockchip RK3566 OPi 3B (DT)
[ 258.129243] Call trace:
[ 258.129245] dump_backtrace+0xa0/0x128
[ 258.129252] show_stack+0x20/0x38
[ 258.129256] dump_stack_lvl+0x60/0xb0
[ 258.129265] dump_stack+0x18/0x28
[ 258.129269] __schedule_bug+0xa0/0xc8
[ 258.129274] __schedule+0x9ac/0xd30
[ 258.129279] schedule+0x60/0x100
[ 258.129282] schedule_timeout+0x194/0x338
[ 258.129289] rk3x_i2c_xfer_common.isra.0+0x384/0x498
[ 258.129296] rk3x_i2c_xfer+0x20/0x60
[ 258.129300] __i2c_transfer+0x194/0x648
[ 258.129308] i2c_transfer+0x9c/0x130
[ 258.129313] i2c_transfer_buffer_flags+0x64/0x98
[ 258.129318] ssd1307fb_update_rect+0x42c/0x560 [ssd1307fb]
[ 258.129334] ssd1307fb_defio_imageblit+0x34/0x50 [ssd1307fb]
[ 258.129343] soft_cursor+0x13c/0x210
[ 258.129350] bit_cursor+0x2dc/0x550
[ 258.129354] fbcon_cursor+0xec/0x108
[ 258.129359] hide_cursor+0x44/0xc8
[ 258.129365] vt_console_print+0x398/0x3b0
[ 258.129370] console_flush_all.isra.0+0x17c/0x410
[ 258.129377] console_unlock+0x4c/0x100
[ 258.129382] vprintk_emit+0x1c8/0x340
[ 258.129386] vprintk_default+0x40/0x58
[ 258.129389] vprintk+0xb8/0xd0
[ 258.129392] _printk+0x68/0x98
[ 258.129398] watchdog_release+0x170/0x230
[ 258.129404] __fput+0xbc/0x288
[ 258.129409] __fput_sync+0x58/0x70
[ 258.129413] __arm64_sys_close+0x40/0x90
[ 258.129419] invoke_syscall+0x4c/0x118
[ 258.129426] el0_svc_common.constprop.0+0x48/0xf0
[ 258.129432] do_el0_svc+0x24/0x38
[ 258.129437] el0_svc+0x48/0x100
[ 258.129443] el0t_64_sync_handler+0xc0/0xc8
[ 258.129448] el0t_64_sync+0x190/0x198
[ 258.573087] ------------[ cut here ]------------
[ 258.573098] DEBUG_LOCKS_WARN_ON(val > preempt_count())
[ 258.573111] WARNING: CPU: 0 PID: 1 at kernel/sched/core.c:5871
preempt_count_sub+0x9c/0x148
[ 258.573130] Modules linked in: algif_hash algif_skcipher af_alg bnep
binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart
fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card
motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1
ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb
brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm
snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine
v4l2_vp
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: charlcd: cancel backlight work on registration failure
With CONFIG_CHARLCD_BL_FLASH, charlcd_init() schedules bl_work before
charlcd_register() calls misc_register(). If registration fails, the
caller frees the charlcd object while delayed work still contains its
address.
Add charlcd_deinit() to cancel the delayed work and turn the backlight
off. Use it for both registration rollback and normal unregistration. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Fill in DMA padding bytes in scsi_alloc_sgtables()
During fuzz testing, the following issue was discovered:
BUG: KMSAN: uninit-value in __dma_map_sg_attrs+0x217/0x310
__dma_map_sg_attrs+0x217/0x310
dma_map_sg_attrs+0x4a/0x70
ata_qc_issue+0x9f8/0x1420
__ata_scsi_queuecmd+0x1657/0x1740
ata_scsi_queuecmd+0x79a/0x920
scsi_queue_rq+0x4472/0x4f40
blk_mq_dispatch_rq_list+0x1cca/0x3ee0
__blk_mq_sched_dispatch_requests+0x458/0x630
blk_mq_sched_dispatch_requests+0x15b/0x340
__blk_mq_run_hw_queue+0xe5/0x250
__blk_mq_delay_run_hw_queue+0x138/0x780
blk_mq_run_hw_queue+0x4bb/0x7e0
blk_mq_sched_insert_request+0x2a7/0x4c0
blk_execute_rq+0x497/0x8a0
sg_io+0xbe0/0xe20
scsi_ioctl+0x2b36/0x3c60
sr_block_ioctl+0x319/0x440
blkdev_ioctl+0x80f/0xd70
__se_sys_ioctl+0x219/0x420
__x64_sys_ioctl+0x93/0xe0
x64_sys_call+0x1d6c/0x3ad0
do_syscall_64+0x4c/0xa0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Uninit was created at:
__alloc_pages+0x5c0/0xc80
alloc_pages+0xe0e/0x1050
blk_rq_map_user_iov+0x2b77/0x6100
blk_rq_map_user_io+0x2fa/0x4d0
sg_io+0xad6/0xe20
scsi_ioctl+0x2b36/0x3c60
sr_block_ioctl+0x319/0x440
blkdev_ioctl+0x80f/0xd70
__se_sys_ioctl+0x219/0x420
__x64_sys_ioctl+0x93/0xe0
x64_sys_call+0x1d6c/0x3ad0
do_syscall_64+0x4c/0xa0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Bytes 14-15 of 16 are uninitialized
Memory access of size 16 starts at ffff88800cbdb000
When processing the last unaligned element of the scatterlist, it is
supplemented with missing bytes in the amount of pad_len. These bytes
remain uninitialized, which leads to a problem.
Extend last_sg->length by pad_len first, then use sg_zero_buffer() to
zero those pad_len bytes. sg_zero_buffer() uses sg_miter internally,
which correctly handles sg entries spanning multiple pages and padding
that crosses a page boundary.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: as3722_get_regulator_dt_data: fix premature of_node_put leaving dangling of_node pointer
In as3722_get_regulator_dt_data(), of_get_child_by_name() acquires a
reference on np, which is then assigned to pdev->dev.of_node. The
function immediately calls of_node_put(np), releasing the reference and
leaving pdev->dev.of_node as a dangling pointer.
Remove the of_node_put(np) call to let the device hold the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
openrisc: fix arbitrary kernel memory access via or1k_atomic syscall
sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user
pointers, v1 and v2, and swaps the words they point to in hand-written
assembly.
l.lwz r29,0(r4)
l.lwz r27,0(r5)
l.sw 0(r4),r27
l.sw 0(r5),r29
The pointers are not checked with access_ok(). The four memory
accesses also have no exception table entries.
A caller passes a kernel address as either pointer, and the syscall
reads from and writes to it directly.
This gives an unprivileged process a kernel read/write primitive. It
overwrites kernel data such as the sys_call_table, gaining code
execution in kernel context.
Check both pointers before entering the critical section. Add fixups
for the four memory accesses so faults on valid but unmapped user
addresses return -EFAULT.
[shorne@gmail.com: fix comment style] |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: pin next file across nlm_inspect_file lock-drop
nlm_traverse_files() pins the current file with f_count++ across
a mutex_unlock for nlm_inspect_file(), but nothing pins the saved
next pointer. A concurrent nlm_release_file() can kfree the next
file during the unlock window, and the iterator dereferences freed
memory on the next loop step.
Pin both current and next before the lock-drop. Advance by
swapping the pinned cursors at the end of each iteration so next
is always held alive across the unlock.
Always call nlm_file_release() after dropping the iteration pin,
regardless of whether the file matched the predicate. Use
nlm_file_inuse(), which does a live walk of the inode lock list,
rather than the cached f_locks field, so skipped files that never
ran nlm_inspect_file() are evaluated correctly.
Because every file in a hash bucket is now pinned and released,
files skipped by the is_failover_file predicate that have no
locks, blocks, shares, or external references are deleted during
traversal. The old code never evaluated skipped files for
cleanup. The new behavior is intentional: such files are stale
and should not persist in the table. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq24257: fix use-after-free on remove
The STAT-pin interrupt is devm-managed, so it stays armed until the devm
cleanup that runs after remove() returns. remove() cancels
bq->iilimit_setup_work while the threaded handler can still fire; that
handler reschedules the work and dereferences bq, so the work runs
against freed memory once devm frees bq.
Make the delayed work device-managed with devm_delayed_work_autocancel(),
registered before the interrupt request. The devm cleanup then releases
the interrupt first, so the handler can no longer reschedule the work,
and cancels the work before bq is freed. The explicit
cancel_delayed_work_sync() in remove() is no longer needed and is dropped.
Found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq256xx: drain usb_work before freeing the charger
The USB-PHY notifier queues usb_work, whose handler calls
power_supply_changed(bq->charger). The reset devm action only unregisters
the notifier and was registered before the power supplies, so devm frees
bq->charger on unwind before the action runs; a usb_work still queued can
then dereference it.
Register the reset action after the power supplies, so it unregisters
the notifiers and drains usb_work before the supplies are released.
Initialize usb_work and obtain the PHY references before registering
the notifiers, so the worker cannot run before the supplies exist.
Found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: lp8727: fix use-after-free in lp8727_release_irq()
lp8727_isr_func(), the threaded IRQ handler, is the only caller that arms
pchg->work via schedule_delayed_work(). lp8727_release_irq() currently
cancels the work before freeing the IRQ, so an IRQ delivered in between
can re-arm the work through the threaded handler. After .remove returns
the devm layer frees pchg while lp8727_delayed_func() may still run and
dereference it.
Free the IRQ first so the threaded handler is quiesced and can no longer
queue work, then cancel the delayed work to drain the final generation.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: rt9455: quiesce delayed work before teardown
The threaded IRQ handler can queue pwr_rdy_work,
max_charging_time_work and batt_presence_work. pwr_rdy_work and
batt_presence_work can also queue max_charging_time_work, while
batt_presence_work can requeue itself.
rt9455_remove() cancels max_charging_time_work before
batt_presence_work. The latter can therefore queue
max_charging_time_work after it has already been cancelled:
rt9455_remove() workqueue
cancel pwr_rdy_work
cancel max_charging_time_work
batt_presence_work queues
max_charging_time_work
cancel batt_presence_work
return
devres frees rt9455_info
max_charging_time_work dereferences
rt9455_info
The IRQ also remains registered until devres cleanup and can queue more
work after any of the cancellation calls. If rt9455_hw_init() fails
after the IRQ has been requested, probe returns without cancelling work
that may already have been queued. A pending callback can then access
rt9455_info after it has been freed.
Register rt9455_cancel_all_delayed_works() through
devm_add_action_or_reset() right after devm_power_supply_register().
devres invokes the action in reverse registration order, after the
managed IRQ has been freed and before rt9455_info is released, so the
delayed works are drained in both rt9455_remove() and the probe error
path. Cancel pwr_rdy_work and batt_presence_work before
max_charging_time_work because both can queue the latter.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: twl4030_charger: cancel workers via devm
bci is devm-allocated. Two workers (bci->work and bci->current_worker)
dereference it. twl4030_bci_remove() disables charging and masks
interrupts. It cancels neither worker. A worker pending at remove() can
run after devm frees bci.
The USB transceiver comes from devm_usb_get_phy_by_node(). devm
unregisters its notifier only after remove() returns. A cancel_work_sync()
in remove() can then race a notifier reschedule. devm_work_autocancel()
and devm_delayed_work_autocancel() avoid that. They cancel the workers
during devm release, before bci is freed.
The current_worker is registered first, since devm will cancel in
reverse order and bci->work can reschedule current_worker.
[Move comment about order into the commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max17040: synchronize work cancellation on suspend
max17040_work() requeues itself after every poll. cancel_delayed_work()
only cancels a pending instance and does not wait for a callback that is
already running.
If system suspend races with the polling callback, the callback can
continue accessing the fuel gauge and requeue itself after the suspend
callback returns.
Use cancel_delayed_work_sync() to ensure polling is quiesced before
suspend completes. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Do not complete a failed ESE read as successful
dasd_int_handler() completes an NRF read of an unallocated ESE track by
calling ese_read() and unconditionally marking the request
DASD_CQR_SUCCESS. dasd_eckd_ese_read() can return an error before it has
zeroed the destination buffer: a failed sense-data parse or a current
track outside the requested range both return early, leaving the
destination pages untouched. The request is still completed successfully,
so the block layer is handed stale / uninitialized memory instead of
zeros.
Check the ese_read() return value and fail the request through the normal
error path instead of forcing DASD_CQR_SUCCESS. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: stop card-detect handling on probe failure
request_irq() registers the SD card-detect interrupt and the probe enables
it before mmc_add_host() runs. If mmc_add_host() fails, the error path only
unmaps the registers and returns: the interrupt stays registered, so the
handler keeps running against the host once it is freed. via_sdc_isr()
dereferences sdhost and its MMIO base and schedules carddet_work, which
via_sdc_card_detect() also runs against freed memory through its
container_of() dereference.
Add a probe-error path that disables and frees the interrupt and cancels
carddet_work before unmapping. carddet_work can re-enable the device
interrupt via via_reset_pcictrl(), which restores PCIINTCTRL, so mask it
again after cancelling the work.
This issue was found by an in-house static analysis tool and confirmed by
manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
interconnect: Fix use after free in icc_get() and of_icc_get_by_index()
In of_icc_get_by_index() and icc_get(), if the dynamic allocation for
path->name fails via kasprintf(), the error handling path directly
calls kfree(path) to free the path object and returns an error.
However, prior to this point, path_find() calls path_init(), which
already links the path's requests into the req_list of the respective
interconnect nodes via hlist_add_head(). Directly invoking kfree(path)
leaves dangling pointers in the hlist. A subsequent call to icc_get()
or icc_set_bw() will traverse or modify these corrupted lists, triggering
a slab use afterfree.
KASAN report showing the vulnerability when reproducing via debugfs:
BUG: KASAN: slab-use-after-free in path_find+0x6f8/0xcfc
Write of size 8 at addr fff000000d43f748 by task sh/1
...
Call trace:
kasan_report+0xac/0xfc
path_find+0x6f8/0xcfc
icc_get+0x148/0x380
icc_get_set+0xf8/0x2d0
...
Freed by task 1:
kfree+0x1a0/0x4a4
icc_get+0x2cc/0x380
icc_get_set+0xf8/0x2d0
Fix this by replacing kfree(path) with the proper teardown function,
icc_put(path), which safely removes the requests from the req_list using
hlist_del() and drops the provider usage references before freeing the
memory.
Additionally, in icc_get(), ensure that the icc_lock mutex is released
prior to calling icc_put(path) to avoid a deadlock, as icc_put()
internally acquires the same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: unregister the connection before draining the rx tasklet
smc_conn_free() calls smc_ism_unset_conn() only while the link group is
still on its device list, and never sets conn->killed.
smc_lgr_terminate_sched() unlinks the group immediately and defers killing
its connections to a work item, so a connection freed in that window keeps
its smcd->conn[] slot with both gates in smcd_handle_irq() open, and the
device can re-arm the receive tasklet after tasklet_kill() has returned. On
the DMB-nocopy path the ghost send buffer is freed right after that drain,
so the re-armed tasklet dereferences it.
Unregister unconditionally and drain before the detach at both teardown
sites, mirroring rmb_desc, which smc_buf_unuse() releases after the drain.
Clear conn->sndbuf_desc before freeing it as well, so a reader that samples
the pointer cannot get one that is already freed. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix info leak and UAF in device unregister path
i3c_master_unregister_i3c_devs() clears i3cdev->dev->desc before
calling device_unregister(). During device_unregister(),
device_del() emits a KOBJ_REMOVE uevent and unbinds the driver while
the device descriptor is still expected to be valid. As a result,
i3c_device_uevent() and a racing modalias_show() can observe a NULL
desc and fall back to an uninitialized stack struct i3c_device_info,
leaking kernel stack contents in the generated modalias. Driver
.remove() callbacks may also encounter an unexpected NULL desc during
unbind.
Keep desc valid until device_unregister() has completed. Since
device_unregister() drops the device reference and may free the device,
take an extra reference with get_device() before unregistering. Clear
desc afterwards and release the extra reference with put_device().
This preserves the release-time invariant that desc must be NULL while
avoiding both the information leak and a potential use-after-free from
writing desc after the device has been released. |
| In the Linux kernel, the following vulnerability has been resolved:
smack: fix cred UAF in smack_file_send_sigiotask()
When inspecting the credentials of another task, objective credentials
(->real_cred, accessed with __task_cred()) must always be used.
Accessing ->cred on a non-current task is forbidden unless that task is
being created or destroyed; a task is allowed to change its own ->cred
pointer with no synchronization, and changing ->cred should only affect the
current syscall.
smack_file_send_sigiotask() was accessing both sets of credentials: First
tsk->cred, then __task_cred(tsk).
Fix it, always access the objective credentials here.
I have tested that this bug can lead to a KASAN-reported UAF of struct cred
in smack_file_send_sigiotask(), and that this fix prevents the race. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: make nft_object rhltable per table
The nft_object rhltable is global, this allows for accessing objects
that are being dismangled from lookup path by other existing netns.
Given the nft_obj_destroy() releases the object inmediately, this might
lead to use-after-free of these objects that are being released.
Make the existing rhltable per table to address this issue to deal with
with the nft_rcv_nl_event() path too.
Update nft_obj_lookup() to take the table as non-const, otherwise,
compiler complains when passing the objname_ht to rhltable_lookup(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_counter: serialize reset with spinlock
Add a global static spinlock to serialize counter fetch+reset
operations, preventing concurrent dump-and-reset from underrunning
values.
The lock is taken before fetching the total so that two parallel
resets cannot both read the same counter values and then both
subtract them.
A global lock is used for simplicity since resets are infrequent.
If this becomes a bottleneck, it can be replaced with a per-net
lock later. |
