| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| fast-uri serializes the port component of a URI without validating it. When recomposing the authority, the userinfo and host components are escaped but the port is concatenated verbatim, so a port value that is not a sequence of digits can inject authority delimiters, demoting the intended host to userinfo and pointing the authority at an attacker-controlled host. Both fast-uri and Node's URL read the result back as the attacker's host with no error, so re-validating the built URI does not catch it. This affects applications that build URIs from parts and assign untrusted data to the port component through the serialize, normalize, or equal functions in their object forms. The issue affects fast-uri versions before 2.4.6, from 3.0.0 before 3.1.7, and from 4.0.0 before 4.1.4. It is fixed in 2.4.6, 3.1.7, and 4.1.4, where recomposeAuthority rejects any port that is not a digit sequence per RFC 3986. |
| A vulnerability was detected in valkey-io valkey up to 9.5.4/9.1.0. Affected by this vulnerability is the function createSlotImportJob of the file src/cluster_migrateslots.c of the component Slot Migration. The manipulation of the argument job_name results in out-of-bounds read. The attack can be executed remotely. The exploit is now public and may be used. Upgrading to version 9.0.5 and 9.1.1 addresses this issue. The patch is identified as f4dc3ca09eb650c2fe14060090a41c524eca803f. Upgrading the affected component is advised. |
| fast-uri accepts a host that contains an unbalanced or misplaced authority bracket without reporting an error. A host that starts with an opening bracket but does not end with a closing bracket is neither validated as an IP literal nor canonicalized as a domain name, so parse() returns it as the host with error undefined, while Node's URL and the HTTP clients built on it resolve the same string to a different host. An application that reads the parsed host to make a host decision, such as an SSRF denylist, a redirect allowlist, or proxy routing, and then passes the original URL to an HTTP client evaluates its policy against a string that is not the host the request reaches. The same host is carried through normalize, equal, and resolve. This affects fast-uri versions 2.4.5, 3.1.6, and 4.1.3, and is fixed in 2.4.6, 3.1.7, and 4.1.4, where parse() reports a malformed host for any host that contains a bracket but is not a valid IPv6 literal. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length
check_and_correct_requested_length() compares (off + len) against
node_size using u32 arithmetic. When the caller passes a large len
value (e.g. from an underflowed subtraction in hfs_brec_remove()),
off + len can wrap past 2^32 and produce a small result, causing the
bounds check to pass when it should fail.
For example, with off=14 and len=0xFFFFFFF2 (underflowed from
data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6,
which is less than a typical node_size of 512, so the check passes and
the subsequent memmove reads ~4GB past the node buffer.
Fix this by widening the addition to u64 before comparing against
node_size. This prevents the u32 wrap while keeping the logic
straightforward. |
| ** UNSUPPORTED WHEN ASSIGNED ** Stack-based Buffer Overflow vulnerability in Apache Lucy.
This issue affects Apache Lucy: all versions.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users.
Lucy is now maintained outside of the ASF
at https://github.com/lucysearch . This issue has been fixed in 0.8.0 there.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| pymonocypher uses cython to wrap the Monocypher C library. Prior to version 4.0.2.8, the argon2i_32 implementation does not check the nb_blocks size. If the caller does not provide a sufficiently large buffer based on the API contract, then argon2i_32 will write past the end of the buffer and possibly corrupt the heap. This issue has been patched in version 4.0.2.8. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3()
During the v3 firmware download the controller sends a v3_data_req with a
32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower
bound of the offset and then sends firmware from that offset.
nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction;
serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data +
nxpdev->fw_dnld_v3_offset, len);
Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size,
so a controller that asks for an offset or length past the firmware image
makes the driver read past the end of nxpdev->fw->data and send that
memory back over UART.
nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent
check to the v3 path, reject the request when it falls outside the firmware
image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at
free_skb stays consistent. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: IPIP tunnel hardware offload is not yet support
No driver supports for IPIP tunnels yet, give up early on setting up the
hardware offload for this scenario.
This patch adds a stub that can be enhanced to add more configuration
that are currently not supported. As of now, the offload work is
enqueued to the worker, then ignored if the hardware offload
configuration is not supported.
Check the NF_FLOW_HW flag to know if this entry was already tried once
to be offloaded so this is not retried on refresh when unsupported. Move
NF_FLOW_HW flag check to nf_flow_offload_add(). If this NF_FLOW_HW flag
is unset the _del and _stats variants are never called.
This can be updated later on to skip hardware offload work to be queued
in case hardware offload does not support it. |
| An integer overflow vulnerability was found in gfs2-utils. The resource group allocation size computation on 32-bit platforms causes an undersized buffer allocation followed by heap out-of-bounds writes when processing crafted GFS2 filesystem images. This vulnerability does not affect 64-bit builds. |
| If configured as a server, CodeMeter Runtime before versions 8.41a and 9.10 accepts requests with opcode 0x5e, which contain the data length and
the data itself. Missing bounds checking on the data length value can lead to out of bounds reads, causing a
segmentation fault that ultimately crashes the CodeMeter Runtime. |
| An out-of-bounds read vulnerability exists in the underlying operating system of AOS-CX that could lead to unauthenticated information disclosure by sending a specially crafted packet. Successful exploitation of this vulnerability results in the ability to disclose sensitive information from the underlying operating system. |
| Denial-of-service vulnerabilities exist in the command line interface of AOS-CX. Successful exploitation could allow an authenticated user to disrupt the normal operation of a vulnerable system. |
| Buffer overflow vulnerabilities exist in an underlying service of AOS-CX that could lead to an unauthenticated denial-of-service condition by sending specially crafted packets to the affected device. Successful exploitation of these vulnerabilities results in a disruption of normal operation of the underlying operating system. |
| A buffer overflow vulnerability exists in the underlying operating system of AOS-CX that could lead to unauthenticated disclosure of sensitive information by sending specially crafted packets to the affected system. Successful exploitation of this vulnerability could result in limited disclosure or modification of information and disruption of the affected system. |
| Stack overflow vulnerabilities exist in an API endpoint of AOS-CX. Successful exploitation could allow an authenticated malicious actor to cause a denial-of-service condition on the affected system. |
| A format string vulnerability exists in the command line interface of AOS-CX that could lead to unauthenticated remote code execution. Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system. |
| A maliciously crafted FBX file, when parsed through Autodesk FBX SDK, can trigger a stack-based buffer overflow vulnerability in fbxsdk::FbxIO::BinaryReadSectionHeader. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| A maliciously crafted FBX file, when parsed through Autodesk FBX SDK, can trigger a stack-based buffer overflow vulnerability in fbxsdk::ExtractDrive. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| jq is a command-line JSON processor. Prior to version 1.8.2, the _strindices builtin in jq's src/builtin.c passes its arguments directly to jv_string_indexes() without verifying they are strings, and jv_string_indexes() in src/jv.c relies solely on assert() checks that are stripped in release builds compiled with -DNDEBUG. This allows an attacker to crash jq trivially with input like _strindices(0), and by crafting a numeric value whose IEEE-754 bit pattern maps to a chosen pointer, achieve a controlled pointer dereference and limited memory read/probe primitive. Any deployment that evaluates untrusted jq filters against a release build is vulnerable. This issue has been patched in commit fdf8ef0f0810e3d365cdd5160de43db46f57ed03, which is part of version 1.8.2. |
| In rsync 3.0.1 through 3.4.1, receive_xattr relies on an untrusted length value during a qsort call, leading to a receiver use-after-free. The victim must run rsync with -X (aka --xattrs). On Linux, many (but not all) common configurations are vulnerable. Non-Linux platforms are more widely vulnerable. |
