| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in a debug function for Cisco RCM for Cisco StarOS Software could allow an unauthenticated, remote attacker to perform debug actions that could result in the disclosure of confidential information that should be restricted.
This vulnerability exists because of a debug service that incorrectly listens to and accepts incoming connections. An attacker could exploit this vulnerability by connecting to the debug port and executing debug commands. A successful exploit could allow the attacker to view sensitive debugging information.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| The API in Accredible Credential.net December 6th, 2023 allows an Insecure Direct Object Reference attack that discloses partial information about certificates and their respective holder. NOTE: the excellium-services.com web page about this issue mentions "Vendor says that it's not a security issue." |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Webcraftic Hide login page allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Hide login page: from n/a through 1.1.9. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in LWS LWS Hide Login allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects LWS Hide Login: from n/a through 2.1.8. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Crestron Automate VX allows Functionality Misuse.
There is no visible indication when the system is recording and recording can be enabled remotely via a network API.
This issue affects Automate VX: from 5.6.8161.21536 through 6.4.0.49. |
| Improper input validation for some Intel(R) PROSet/Wireless WiFi software for linux before version 23.20 may allow an unauthenticated user to potentially enable denial of service via adjacent access. |
| Hardware logic contains race conditions in some Intel(R) Processors may allow an authenticated user to potentially enable partial information disclosure via local access. |
| When parsing a multipart form (either explicitly with Request.ParseMultipartForm or implicitly with Request.FormValue, Request.PostFormValue, or Request.FormFile), limits on the total size of the parsed form were not applied to the memory consumed while reading a single form line. This permits a maliciously crafted input containing very long lines to cause allocation of arbitrarily large amounts of memory, potentially leading to memory exhaustion. With fix, the ParseMultipartForm function now correctly limits the maximum size of form lines. |
| When following an HTTP redirect to a domain which is not a subdomain match or exact match of the initial domain, an http.Client does not forward sensitive headers such as "Authorization" or "Cookie". For example, a redirect from foo.com to www.foo.com will forward the Authorization header, but a redirect to bar.com will not. A maliciously crafted HTTP redirect could cause sensitive headers to be unexpectedly forwarded. |
| phpgt/Dom provides access to modern DOM APIs. Versions of phpgt/Dom prior to 4.1.8 expose the GITHUB_TOKEN in the Dom workflow run artifact. The ci.yml workflow file uses actions/upload-artifact@v4 to upload the build artifact. This artifact is a zip of the current directory, which includes the automatically generated .git/config file containing the run's GITHUB_TOKEN. Seeing as the artifact can be downloaded prior to the end of the workflow, there is a few seconds where an attacker can extract the token from the artifact and use it with the GitHub API to push malicious code or rewrite release commits in your repository. Any downstream user of the repository may be affected, but the token should only be valid for the duration of the workflow run, limiting the time during which exploitation could occur. Version 4.1.8 fixes the issue. |
| Improper input validation in UEFI firmware for some Intel(R) processors may allow a privileged user to potentially enable escalation of privilege via local access. |
| Improper input validation in some Intel(R) CBI software before version 1.1.0 may allow an authenticated user to potentially enable denial of service via local access. |
| Improper input validation for some some Intel(R) PROSet/Wireless WiFi software for Windows before version 23.20 may allow an unauthenticated user to potentially enable denial of service via adjacent access. |
| Improper input validation for some Intel(R) PROSet/Wireless WiFi software before version 23.20 may allow an unauthenticated user to potentially enable denial of service via adjacent access. |
| A certain software build for the Sharp Rouvo V device (SHARP/VZW_STTM21VAPP/STTM21VAPP:12/SP1A.210812.016/1KN0_0_530:user/release-keys) leaks the Wi-Fi MAC address and the Bluetooth MAC address to system properties that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in this instance they are leaked by a high-privilege process and can be obtained indirectly. This malicious app reads from the "ro.boot.wifi_mac" system property to indirectly obtain the Wi-Fi MAC address and reads the "ro.boot.bt_mac" system property to obtain the Bluetooth MAC address. |
| An issue was discovered in a third-party component related to vendor.gsm.serial, shipped on devices from multiple device manufacturers. Various software builds for the BLU View 2, Boost Mobile Celero 5G, Sharp Rouvo V, Motorola Moto G Pure, Motorola Moto G Power, T-Mobile Revvl 6 Pro 5G, and T-Mobile Revvl V+ 5G devices leak the device serial number to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: BLU View 2 (BLU/B131DL/B130DL:11/RP1A.200720.011/1672046950:user/release-keys); Boost Mobile Celero 5G (Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V067:user/release-keys); Sharp Rouvo V (SHARP/VZW_STTM21VAPP/STTM21VAPP:12/SP1A.210812.016/1KN0_0_530:user/release-keys); Motorola Moto G Pure (motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-2/74844:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-7/5cde8:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-10/d67faa:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-13/b4a29:user/release-keys, motorola/ellis_trac/ellis:12/S3RH32.20-42-10/1c2540:user/release-keys, motorola/ellis_trac/ellis:12/S3RHS32.20-42-13-2-1/6368dd:user/release-keys, motorola/ellis_a/ellis:11/RRH31.Q3-46-50-2/20fec:user/release-keys, motorola/ellis_vzw/ellis:11/RRH31.Q3-46-138/103bd:user/release-keys, motorola/ellis_vzw/ellis:11/RRHS31.Q3-46-138-2/e5502:user/release-keys, and motorola/ellis_vzw/ellis:12/S3RHS32.20-42-10-14-2/5e0b0:user/release-keys); Motorola Moto G Power (motorola/tonga_g/tonga:11/RRQ31.Q3-68-16-2/e5877:user/release-keys and motorola/tonga_g/tonga:12/S3RQS32.20-42-10-6/f876d3:user/release-keys); T-Mobile Revvl 6 Pro 5G (T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V070:user/release-keys); and T-Mobile Revvl V+ 5G (T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V077:user/release-keys). This malicious app reads from the "vendor.gsm.serial" system property to indirectly obtain the device serial number. |
| Various software builds for the following TCL 30Z and TCL A3X devices leak the ICCID to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: TCL 30Z (TCL/4188R/Jetta_ATT:12/SP1A.210812.016/LV8E:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU5P:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU61:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU66:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU68:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6P:user/release-keys, and TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6X:user/release-keys) and TCL A3X (TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAAZ:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB3:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB7:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABA:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABM:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABP:user/release-keys, and TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABS:user/release-keys). This malicious app reads from the "persist.sys.tctPowerIccid" system property to indirectly obtain the ICCID. |
| Certain software builds for the Nokia C200 and Nokia C100 Android devices contain a vulnerable, pre-installed app with a package name of com.tracfone.tfstatus (versionCode='31', versionName='12') that allows local third-party apps to execute arbitrary AT commands in its context (radio user) via AT command injection due to inadequate access control and inadequate input filtering. No permissions or special privileges are necessary to exploit the vulnerability in the com.tracfone.tfstatus app. No user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable device are as follows: Nokia C200 (Nokia/Drake_02US/DRK:12/SP1A.210812.016/02US_1_080:user/release-keys and Nokia/Drake_02US/DRK:12/SP1A.210812.016/02US_1_040:user/release-keys) and Nokia C100 (Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_270:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_190:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_130:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_110:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_080:user/release-keys, and Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_050:user/release-keys). This malicious app sends a broadcast Intent to the receiver component named com.tracfone.tfstatus/.TFStatus. This broadcast receiver extracts a string from the Intent and uses it as an extra when it starts the com.tracfone.tfstatus/.TFStatusActivity activity component which uses the externally controlled string as an input to execute an AT command. There are two different injection techniques to successfully inject arbitrary AT commands to execute. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in OpenText Performance Center on Windows allows Retrieve Embedded Sensitive Data.This issue affects Performance Center: 12.63. |
| The login functionality of the web server in affected devices does not normalize the response times of login attempts. An unauthenticated remote attacker could exploit this side-channel information to distinguish between valid and invalid usernames. |
