| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: bound bulk IN response length to the received transfer
usbio_bulk_msg() copies bpkt_len = le16_to_cpu(bpkt->len) bytes out of
the bulk IN buffer (usbio->rxbuf, allocated with size usbio->rxbuf_len)
into the caller's buffer. bpkt_len is fully controlled by the device
and is only checked against ibuf_len; ibuf_len in turn is checked
against usbio->txbuf_len, not against rxbuf_len:
if ((obuf_len > (usbio->txbuf_len - sizeof(*bpkt))) ||
(ibuf_len > (usbio->txbuf_len - sizeof(*bpkt))))
return -EMSGSIZE;
txbuf_len and rxbuf_len are taken independently from the bulk OUT and
bulk IN endpoint wMaxPacketSize in usbio_probe(). A malicious or
malfunctioning device that advertises a large bulk OUT endpoint and a
small bulk IN endpoint (e.g. by claiming one of the quirk-free IDs such
as the Lattice NX33U, 0x2ac1:0x20cb) therefore makes ibuf_len, and
hence the device-supplied bpkt_len, exceed rxbuf_len. memcpy() then
reads up to txbuf_len - rxbuf_len bytes past the end of the rxbuf slab
object. The over-read bytes are handed back to the i2c layer and on to
user space through i2c-dev, disclosing adjacent slab memory; with KASAN
this is reported as a slab-out-of-bounds read.
The number of bytes actually received is already known: act equals the
URB actual_length and is bounded by rxbuf_len. Reject any response
that claims more payload than was received, mirroring the existing
"act < sizeof(*bpkt)" check just above.
The control path (usbio_ctrl_msg()) is not affected: it uses a single
buffer (ctrlbuf) for both directions, so its analogous copy can never
leave the allocation.
Found by code review. The out-of-bounds read was confirmed under
AddressSanitizer with a faithful userspace model of usbio_bulk_msg()'s
receive path (an rxbuf_len-sized buffer, the same act/ibuf_len/bpkt_len
checks and the memcpy). A USB raw-gadget + dummy_hcd reproducer is
also available. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: loongson - Remove broken and unused loongson-rng
The loongson-rng rng_alg has several vulnerabilities, including not
providing forward security, and a use-after-free bug due to the use of
wait_for_completion_interruptible().
Meanwhile, the rng_alg framework doesn't really have any purpose in the
first place other than to access the software algorithms crypto/drbg.c
and crypto/jitterentropy.c. Hardware-specific rng_algs have no
in-kernel user, and unlike hwrng there's no feed into the actual Linux
RNG. As such, there's really no point to this code. There are of
course other rng_alg drivers that are similarly unused, but they're
similarly in the process of being phased out, e.g.
https://lore.kernel.org/r/20260529193648.18172-1-ebiggers@kernel.org and
https://lore.kernel.org/r/20260529220430.34135-1-ebiggers@kernel.org
Given that, there's no point in fixing forward these vulnerabilities,
and it makes much more sense to simply roll back the addition of this
driver. If this platform provides TRNG (not PRNG) functionality, it
could make sense to add a hwrng driver, but it would be quite different. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: chacha20poly1305 - validate poly1305 template argument
chachapoly_create() still accepts the compatibility poly1305 parameter
in the template name, but it assumes the second template argument is
always present and immediately passes it to strcmp().
When the argument is missing, crypto_attr_alg_name() returns an error
pointer. Check for that before comparing the name so malformed template
instantiations fail with an error instead of dereferencing the error
pointer in strcmp().
This matches the surrounding Crypto API template pattern where
crypto_attr_alg_name() results are validated before string-specific use. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - use print_hex_dump_devel to guard key hex dumps
Use print_hex_dump_devel() for dumping sensitive key material in
*_setkey() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG
is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
partitions: aix: bound the pp_count scan to the ppe array
aix_partition() reads the physical volume descriptor into a fixed-size
struct pvd and then scans its physical-partition-extent array:
int numpps = be16_to_cpu(pvd->pp_count);
...
for (i = 0; i < numpps; i += 1) {
struct ppe *p = pvd->ppe + i;
...
lp_ix = be16_to_cpu(p->lp_ix);
pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a
fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the
on-disk pp_count. pp_count is an unvalidated __be16 read straight from
the descriptor, so a crafted AIX image with pp_count larger than 1016
drives the loop to read pvd->ppe[i] past the end of the allocation (up
to 65535 entries, ~2 MB out of bounds).
The partition scan runs without mounting anything, when a block device
with a crafted AIX/IBM partition table appears (an attacker-supplied
image attached with losetup -P, or a device auto-scanned by udev), via
msdos_partition() -> aix_partition().
Clamp the scan to the number of entries the ppe[] array can hold. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: media: ipu7: fix double-free and use-after-free in error paths
In both ipu7_isys_init() and ipu7_psys_init(), pdata is allocated and
then passed to ipu7_bus_initialize_device(), which stores it in
adev->pdata. The ipu7_bus_release() function frees adev->pdata when the
device's reference count drops to zero.
Two error paths incorrectly call kfree(pdata) after the device teardown
has already freed it:
1. When ipu7_mmu_init() fails: put_device() is called, which drops the
reference count to zero and triggers ipu7_bus_release() ->
kfree(pdata). The subsequent kfree(pdata) is a double-free.
2. When ipu7_bus_add_device() fails: it calls auxiliary_device_uninit()
internally, which calls put_device() -> ipu7_bus_release() ->
kfree(pdata). The subsequent kfree(pdata) is again a double-free.
Note that the kfree(pdata) when ipu7_bus_initialize_device() itself
fails is correct, because in that case auxiliary_device_init() failed
and the release function was never set up, so pdata must be freed
manually.
Additionally, the error code was not saved before calling put_device(),
causing ERR_CAST() to dereference the already-freed adev pointer when
constructing the return value. Fix this by saving the error from
dev_err_probe() before put_device() and returning ERR_PTR() instead.
Remove the redundant kfree(pdata) calls and fix the use-after-free in
the return values of the two affected error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix netfs_invalidate_folio() to clear dirty bit if all changes gone
If a streaming write is made, this will leave the relevant modified folio
in a not-uptodate, but dirty state with a netfs_folio struct hung off of
folio->private indicating the dirty range. Subsequently truncating the
file such that the dirty data in the folio is removed, but the first part
of the folio theoretically remains will cause the netfs_folio struct to be
discarded... but will leave the dirty flag set.
If the folio is then read via mmap(), netfs_read_folio() will see that the
page is dirty and jump to netfs_read_gaps() to fill in the missing bits.
netfs_read_gaps(), however, expects there to be a netfs_folio struct
present and can oops because truncate removed it.
Fix this by calling folio_cancel_dirty() in netfs_invalidate_folio() in the
event that all the dirty data in the folio is erased (as nfs does).
Also add some tracepoints to log modifications to a dirty page.
This can be reproduced with something like:
dd if=/dev/zero of=/xfstest.test/foo bs=1M count=1
umount /xfstest.test
mount /xfstest.test
xfs_io -c "w 0xbbbf 0xf96c" \
-c "truncate 0xbbbf" \
-c "mmap -r 0xb000 0x11000" \
-c "mr 0xb000 0x11000" \
/xfstest.test/foo
with fscaching disabled (otherwise streaming writes are suppressed) and a
change to netfs_perform_write() to disallow streaming writes if the fd is
open O_RDWR:
if (//(file->f_mode & FMODE_READ) || <--- comment this out
netfs_is_cache_enabled(ctx)) {
It should be reproducible even without this change, but if prevents the
above trivial xfs_io command from reproducing it.
Note that the initial dd is important: the file must start out sufficiently
large that the zero-point logic doesn't just clear the gaps because it
knows there's nothing in the file to read yet. Unmounting and mounting is
needed to clear the pagecache (there are other ways to do that that may
also work).
This was initially reproduced with the generic/522 xfstest on some patches
that remove the FMODE_READ restriction. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: fix VM_BUG_ON_FOLIO() issue in netfs_write_begin() call
The multiple runs of generic/013 test-case is capable
to reproduce a kernel BUG at mm/filemap.c:1504 with
probability of 30%.
while true; do
sudo ./check generic/013
done
[ 9849.452376] page: refcount:3 mapcount:0 mapping:00000000e58ff252 index:0x10781 pfn:0x1c322
[ 9849.452412] memcg:ffff8881a1915800
[ 9849.452417] aops:ceph_aops ino:1000058db9e dentry name(?):"f9XXXXXX"
[ 9849.452432] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
[ 9849.452441] raw: 0017ffffc0000000 0000000000000000 dead000000000122 ffff88816110d248
[ 9849.452445] raw: 0000000000010781 0000000000000000 00000003ffffffff ffff8881a1915800
[ 9849.452447] page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio))
[ 9849.452474] ------------[ cut here ]------------
[ 9849.452476] kernel BUG at mm/filemap.c:1504!
[ 9849.478635] Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
[ 9849.481772] CPU: 2 UID: 0 PID: 84223 Comm: fsstress Not tainted 7.0.0-rc1+ #18 PREEMPT(full)
[ 9849.482881] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-9.fc43 06/1
0/2025
[ 9849.484539] RIP: 0010:folio_unlock+0x85/0xa0
[ 9849.485076] Code: 89 df 31 f6 e8 1c f3 ff ff 48 8b 5d f8 c9 31 c0 31 d2 31 f6 31 ff c3 cc
cc cc cc 48 c7 c6 80 6c d9 a7 48 89 df e8 4b b3 10 00 <0f> 0b 48 89 df e8 21 e6 2c 00 eb 9d 0f 1f 40 00 66 66 2e 0f 1f 84
[ 9849.493818] RSP: 0018:ffff8881bb8076b0 EFLAGS: 00010246
[ 9849.495740] RAX: 0000000000000000 RBX: ffffea00070c8980 RCX: 0000000000000000
[ 9849.498678] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 9849.500559] RBP: ffff8881bb8076b8 R08: 0000000000000000 R09: 0000000000000000
[ 9849.501097] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000010782000
[ 9849.502108] R13: ffff8881935de738 R14: ffff88816110d010 R15: 0000000000001000
[ 9849.502516] FS: 00007e36cbe94740(0000) GS:ffff88824a899000(0000) knlGS:0000000000000000
[ 9849.502996] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9849.503810] CR2: 000000c0002b0000 CR3: 000000011bbf6004 CR4: 0000000000772ef0
[ 9849.504459] PKRU: 55555554
[ 9849.504626] Call Trace:
[ 9849.505242] <TASK>
[ 9849.505379] netfs_write_begin+0x7c8/0x10a0
[ 9849.505877] ? __kasan_check_read+0x11/0x20
[ 9849.506384] ? __pfx_netfs_write_begin+0x10/0x10
[ 9849.507178] ceph_write_begin+0x8c/0x1c0
[ 9849.507934] generic_perform_write+0x391/0x8f0
[ 9849.508503] ? __pfx_generic_perform_write+0x10/0x10
[ 9849.509062] ? file_update_time_flags+0x19a/0x4b0
[ 9849.509581] ? ceph_get_caps+0x63/0xf0
[ 9849.510259] ? ceph_get_caps+0x63/0xf0
[ 9849.510530] ceph_write_iter+0xe79/0x1ae0
[ 9849.511282] ? __pfx_ceph_write_iter+0x10/0x10
[ 9849.511839] ? lock_acquire+0x1ad/0x310
[ 9849.512334] ? ksys_write+0xf9/0x230
[ 9849.512582] ? lock_is_held_type+0xaa/0x140
[ 9849.513128] vfs_write+0x512/0x1110
[ 9849.513634] ? __fget_files+0x33/0x350
[ 9849.513893] ? __pfx_vfs_write+0x10/0x10
[ 9849.514143] ? mutex_lock_nested+0x1b/0x30
[ 9849.514394] ksys_write+0xf9/0x230
[ 9849.514621] ? __pfx_ksys_write+0x10/0x10
[ 9849.514887] ? do_syscall_64+0x25e/0x1520
[ 9849.515122] ? __kasan_check_read+0x11/0x20
[ 9849.515366] ? trace_hardirqs_on_prepare+0x178/0x1c0
[ 9849.515655] __x64_sys_write+0x72/0xd0
[ 9849.515885] ? trace_hardirqs_on+0x24/0x1c0
[ 9849.516130] x64_sys_call+0x22f/0x2390
[ 9849.516341] do_syscall_64+0x12b/0x1520
[ 9849.516545] ? do_syscall_64+0x27c/0x1520
[ 9849.516783] ? do_syscall_64+0x27c/0x1520
[ 9849.517003] ? lock_release+0x318/0x480
[ 9849.517220] ? __x64_sys_io_getevents+0x143/0x2d0
[ 9849.517479] ? percpu_ref_put_many.constprop.0+0x8f/0x210
[ 9849.517779] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 9849.518073] ? do_syscall_64+0x25e/0x1520
[ 9849.518291] ? __kasan_check_read+0x11/0x20
[ 9849.518519] ? trace_hardirqs_on_prepare+0x178/0x1c0
[ 9849.518799] ? do_syscall_64+0x27c/0x1520
[ 9
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix netfs_read_to_pagecache() to pause on subreq failure
Fix netfs_read_to_pagecache() so that it pauses the generation of new
subrequests if an already-issued subrequest fails. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: vme_user: bound slave read/write to the kern_buf size
The SLAVE-path helpers buffer_to_user() and buffer_from_user() copy
'count' bytes into/out of the fixed-size kern_buf (size_buf ==
PCI_BUF_SIZE == 0x20000, 128 KiB) using *ppos as the offset, without
bounding *ppos + count against size_buf.
vme_user_write()/vme_user_read() only clamp count to the VME window size
(image_size = vme_get_size(resource)), which VME_SET_SLAVE sets from the
user-supplied slave.size -- validated against the VME address space (up
to VME_A32_MAX = 4 GiB), not against PCI_BUF_SIZE. When the window
exceeds 128 KiB, a write()/read() copies past the kern_buf allocation.
Clamp count against size_buf in both helpers, with an early return when
*ppos is already at/after the buffer end. *ppos is >= 0 here (the caller
rejects negative offsets), so size_buf - *ppos cannot wrap. This mirrors
the existing clamp in the MASTER-path helpers resource_to_user() /
resource_from_user(), and matches the read()/write() convention of a
short transfer at end-of-buffer.
Found by static analysis (CodeQL taint tracking + CBMC bounded model
checking) and confirmed dynamically under KASAN with the vme_fake bridge:
BUG: KASAN: slab-out-of-bounds in _copy_from_user+0x2d/0x80
Write of size 262144 at addr ffff888004100000 by task trigger/68
_copy_from_user+0x2d/0x80
vme_user_write+0x13e/0x240 [vme_user]
vfs_write+0x1b8/0x7a0
ksys_write+0xb8/0x150 |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix cancellation of a DIO and single read subrequests
When the preparation of a new subrequest for a read fails, if the
subrequest has already been added to the stream->subrequests list, it can't
simply be put and abandoned as the collector may see it. Also, if it
hasn't been queued yet, it has two outstanding refs that both need to be
put. Both DIO read and single-read dispatch fail at this; further, both
differ in the order they do things to the way buffered read works.
Fix cancellation of both DIO-read and single-read subrequests that failed
preparation by the following steps:
(1) Harmonise all three reads (buffered, dio, single) to queue the subreq
before prepping it.
(2) Make all three call netfs_queue_read() to do the queuing.
(3) Set NETFS_RREQ_ALL_QUEUED independently of the queuing as we don't
know the length of the subreq at this point.
(4) In all cases, set the error and NETFS_SREQ_FAILED flag on the subreq
and then call netfs_read_subreq_terminated() to deal with it. This
will pass responsibility off to the collector for dealing with it. |
| Integer overflow or wraparound in .NET allows an unauthorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix NULL pointer dereference in func_set_flag()
func_set_flag() dereferences tr->current_trace_flags before verifying
that the current tracer is actually the function tracer. When the active
tracer has been switched away from "function" (e.g., to "wakeup_rt"),
tr->current_trace_flags can be NULL, leading to a NULL pointer
dereference and kernel crash.
The call chain that triggers this is:
trace_options_write()
-> __set_tracer_option()
-> trace->set_flag() /* func_set_flag */
In func_set_flag(), the first operation is:
if (!!set == !!(tr->current_trace_flags->val & bit))
This dereferences tr->current_trace_flags unconditionally. The safety
check that guards against a non-function tracer:
if (tr->current_trace != &function_trace)
return 0;
is placed *after* the dereference, which is too late.
This was observed with the following crash dump:
BUG: unable to handle page fault at 0000000000000000
RIP: func_set_flag+0xd
Call Trace:
__set_tracer_option+0x27
trace_options_write+0x75
vfs_write+0x12a
ksys_write+0x66
do_syscall_64+0x5b
RIP: ffffffff914c973d RSP: ff67ec88b01dfdf0 RFLAGS: 00010202
RAX: 0000000000000000 RBX: ff3a826e80354580 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffffff93918080
The disassembly confirms the fault:
func_set_flag+0: mov 0x1f08(%rdi), %rax ; RAX = tr->current_trace_flags = NULL
func_set_flag+13: mov (%rax), %eax ; page fault: dereference NULL
At the time of the crash:
tr->current_trace_flags = 0x0 (NULL)
tr->current_trace = wakeup_rt_tracer (not function_trace)
The scenario is that a process opens a function tracer option file (such
as "func_stack_trace"), then the current tracer is switched to another
tracer (e.g., "wakeup_rt"), which sets current_trace_flags to NULL. When
the process subsequently writes to the option file, func_set_flag() is
invoked and crashes on the NULL dereference.
Fix this by moving the current_trace check before the
current_trace_flags dereference, so that func_set_flag() returns early
when the function tracer is not active. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix bio leak on mapping failure
The local bio is always NULL, so we'd leak the bio if the integrity
mapping failed. Just get it directly from the request. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/statmount: fix slab out-of-bounds write in statmount_mnt_idmap
statmount_mnt_idmap() writes one mapping with seq_printf() and then
manually advances seq->count to include the NUL separator.
If seq_printf() overflows, seq_set_overflow() sets seq->count to
seq->size. The manual seq->count++ changes this to seq->size + 1.
seq_has_overflowed() then no longer detects the overflow. The corrupted
count returns to statmount_string(), which later executes:
seq->buf[seq->count++] = '\0';
This causes a 1-byte NULL out-of-bounds write on the dynamically
allocated seq buffer.
Fix this by checking for overflow immediately after seq_printf(). |
| In the Linux kernel, the following vulnerability has been resolved:
fprobe: Fix unregister_fprobe() to wait for RCU grace period
Commit 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer")
changed fprobe to register struct fprobe to an rcu-hlist, but it forgot
to wait for RCU GP. Thus there can be use-after-free if the fprobe is
released right after unregistering. This can be happened on fprobe
event and sample module code.
To fix this issue, add synchronize_rcu() in unregister_fprobe().
Note that BPF is OK because fprobe is used as a part of
bpf_kprobe_multi_link. This unregisters its fprobe in
bpf_kprobe_multi_link_release() and it is deallocated via
bpf_kprobe_multi_link_dealloc(), which is invoked from
bpf_link_defer_dealloc_rcu_gp() RCU callback.
For BPF, this also introduced unregister_fprobe_async() which does
NOT wait for RCU grace priod. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: fix disconnect UAF in client teardown
usbio_disconnect() walks usbio->cli_list in reverse and uninitializes each
auxiliary device. auxiliary_device_uninit() drops the device reference, and
for an unbound child that can run usbio_auxdev_release() and free the
containing struct usbio_client.
list_for_each_entry_reverse() advances after the loop body by reading
client->link.prev. If the current client is freed by
auxiliary_device_uninit(), the iterator dereferences freed memory.
Use list_for_each_entry_safe_reverse() so the previous client is
cached before the body can drop the final reference. This preserves
reverse teardown order while keeping the next iterator cursor independent
of the current client's lifetime.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in usbio_disconnect+0x12e/0x150
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? usbio_disconnect+0x12e/0x150
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x188/0x320
? usbio_disconnect+0x12e/0x150
kasan_report+0xe0/0x110
? usbio_disconnect+0x12e/0x150
usbio_disconnect+0x12e/0x150
usb_unbind_interface+0xf3/0x400
really_probe+0x316/0x660
__driver_probe_device+0x106/0x240
driver_probe_device+0x4a/0x110
__device_attach_driver+0xf1/0x1a0
? __pfx___device_attach_driver+0x10/0x10
bus_for_each_drv+0xf9/0x160
? __pfx_bus_for_each_drv+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? trace_hardirqs_on+0x18/0x130
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x44/0x60
__device_attach+0x133/0x2a0
? __pfx___device_attach+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? do_raw_spin_unlock+0x9a/0x100
? srso_alias_return_thunk+0x5/0xfbef5
device_initial_probe+0x55/0x70
bus_probe_device+0x4a/0xd0
device_add+0x9b9/0xc10
? __pfx_device_add+0x10/0x10
? _raw_spin_unlock_irqrestore+0x44/0x60
? srso_alias_return_thunk+0x5/0xfbef5
? lockdep_hardirqs_on_prepare+0xea/0x1a0
? srso_alias_return_thunk+0x5/0xfbef5
? usb_enable_lpm+0x3c/0x260
usb_set_configuration+0xb64/0xf20
usb_generic_driver_probe+0x5f/0x90
usb_probe_device+0x71/0x1b0
really_probe+0x46b/0x660
__driver_probe_device+0x106/0x240
driver_probe_device+0x4a/0x110
__device_attach_driver+0xf1/0x1a0
? __pfx___device_attach_driver+0x10/0x10
bus_for_each_drv+0xf9/0x160
? __pfx_bus_for_each_drv+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? trace_hardirqs_on+0x18/0x130
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x44/0x60
__device_attach+0x133/0x2a0
? __pfx___device_attach+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? do_raw_spin_unlock+0x9a/0x100
? srso_alias_return_thunk+0x5/0xfbef5
device_initial_probe+0x55/0x70
bus_probe_device+0x4a/0xd0
device_add+0x9b9/0xc10
? __pfx_device_add+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? add_device_randomness+0xb7/0xf0
usb_new_device+0x492/0x870
hub_event+0x1b10/0x29c0
? __pfx_hub_event+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? lock_acquire+0x187/0x300
? process_one_work+0x475/0xb90
? srso_alias_return_thunk+0x5/0xfbef5
? lock_release+0xc8/0x290
? srso_alias_return_thunk+0x5/0xfbef5
process_one_work+0x4d7/0xb90
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_hub_event+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: add and use xtables_unregister_table_exit
Previous change added xtables_unregister_table_pre_exit to detach the
table from the packetpath and to unlink it from the active table list.
In case of rmmod, userspace that is doing set/getsockopt for this table
will not be able to re-instantiate the table:
1. The larval table has been removed already
2. existing instantiated table is no longer on the xt pernet table list.
This adds the second stage helper:
unlink the table from the dying list, free the hook ops (if any) and do
the audit notification. It replaces xt_unregister_table(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/log: Fix infinite loop when scale is too large for display
When scale is large enough that scaled_font exceeds the display
dimensions, rows or columns become 0. A columns value of 0 causes
an infinite loop in drm_log_draw_kmsg_record() because the loop
never decrements len.
Check for zero rows/columns in drm_log_setup_modeset() and return
an error, cleaning up the already allocated buffer to avoid a leak. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Snapshot notifier callbacks under lock
Both notification handlers currently look up a notifier callback under
notify_lock, drop the lock, and then dereference the returned
notifier entry. A concurrent unregister can delete and free that
entry in the gap, leaving the handler to dereference stale memory.
Copy the callback pointer and callback data while notify_lock is
still held and invoke the callback only after the lock is dropped.
This keeps the existing callback execution model while removing the
use-after-free window in both the framework and non-framework
notification paths. |
