| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: remove fscache backend entirely
EROFS over fscache was introduced to provide image lazy pulling
functionality. After the feature landed, the fscache subsystem made
netfs a new hard dependency, which is unexpected for a local filesystem
and has an kernel-defined caching hierarchy which could be inflexible
compared to the fanotify pre-content hooks. Therefore, this feature has
been deprecated for almost two years.
As EROFS file-backed mounts and fanotify pre-content hooks both upstream
for a while and already providing equivalent functionality (erofs-utils
has supported fanotify pre-content hooks), let's remove the fscache
backend now.
The main application of this feature is Nydus [1], and they plan to move
to use fanotify pre-content hooks in the near future too.
I hope this patch can be merged into Linux 7.2, which is also motivated
by newly found implementation issues [2][3] that are not worth
investigating given the deprecation and limited development resources.
The associated fscache/cachefiles cleanup patch will follow separately
through the vfs tree (netfs) later: it seems fine since the codebase is
isolated by CONFIG_CACHEFILES_ONDEMAND.
[1] https://github.com/dragonflyoss/nydus/blob/v2.1.0/docs/nydus-fscache.md
[2] https://github.com/dragonflyoss/nydus/pull/1824
[3] https://lore.kernel.org/r/20260619135800.1594811-1-michael.bommarito@gmail.com |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Fix sync entry leak on OA config emit failure
xe_oa_emit_oa_config() releases the sync entries and the syncs array
only on its success path. When it fails before the point of no return
(fence allocation, config buffer allocation or batch submission), it
returns without touching stream->syncs.
The stream open path handles such failures in the caller, but
xe_oa_config_locked() propagates the error without any cleanup, so the
syncs array and the fence references held by the parsed entries are
leaked. The next config ioctl overwrites stream->syncs, making the
memory unreachable for good.
Clean up the parsed syncs when xe_oa_emit_oa_config() fails, matching
the cleanup done by the stream open error path.
(cherry picked from commit 8af97b3da2cfce04e6b457c6eb17ed3c1daf912b) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Reject UVD message with dimensions above 4096
Fixes potential overflow in DPB size calculations.
(cherry picked from commit 05e1387d151f71569fbe122d2c89f9db0c21dc10) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Reject UVD message with invalid number of h265 refs
Same change as for h264, avoids overflow later when calculating
min dpb size.
(cherry picked from commit a4b0720e4f1601f97f59a2be9c1b4b94fa6527d5) |
| NVIDIA NeMo for Linux contains a vulnerability where an attacker may cause OS command injection. A successful exploit of this vulnerability may lead to code execution, data tampering, escalation of privileges and information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: bound the attribute-list entry in ntfs_read_inode_mount()
The $MFT attribute-list walk in ntfs_read_inode_mount() validates each
entry only with "(u8 *)al_entry + 6 > al_end" and
"(u8 *)al_entry + le16_to_cpu(al_entry->length) > al_end", but then reads
al_entry->lowest_vcn (an __le64 at offset 8) and al_entry->mft_reference
(offset 16) -- fields beyond the 6 bytes proven in range. al_entry->length
is attacker-controlled and only required non-zero, so a short entry (e.g.
length 8) placed at the tail passes both checks while the lowest_vcn /
mft_reference reads fall past al_end.
al_end is ni->attr_list + attr_list_size (the on-disk size); the buffer is
kvzalloc(round_up(attr_list_size, SECTOR_SIZE)), so the sector rounding
usually absorbs the over-read -- but when attr_list_size is a multiple of
SECTOR_SIZE there is no slack and a crafted $MFT attribute list produces an
out-of-bounds read at mount time.
Validate the entry with ntfs_attr_list_entry_is_valid() (added in patch
1/3) before dereferencing it, matching the bound the other attribute-list
walks now use. The validator already requires the length to cover the fixed
header, which makes the separate "!al_entry->length" check redundant, so
drop it too. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Validate CRIU-restored IDs before idr_alloc
The KFD CRIU restore flow restores previously saved object IDs from
userspace.
For event restore:
kfd_criu_restore_event()
-> create_signal_event() / create_other_event()
-> allocate_event_notification_slot()
-> idr_alloc(..., *restore_id, *restore_id + 1, ...)
For BO restore:
criu_restore_memory_of_gpu()
-> idr_alloc(..., bo_priv->idr_handle, ...)
In both cases, the restored ID comes from userspace-provided CRIU data.
idr_alloc() expects the ID range values to fit within signed int
limits. If a restored ID is larger than INT_MAX, it can trigger a WARN
in the IDR layer.
A kernel WARN is undesirable because it prints a warning trace and may
cause a panic or reboot on systems with panic_on_warn enabled.
Smatch reported these paths as allowing unchecked userspace values to
reach idr_alloc().
Add INT_MAX validation before using restored IDs in:
- kfd_criu_restore_event()
- criu_restore_memory_of_gpu()
If the restored ID is invalid, return -EINVAL.
This prevents invalid restore data from reaching the IDR layer and
avoids WARN-triggering paths, while keeping valid restore behavior
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/tas2781: Cancel async firmware request at unbind
TAS2781 HDA I2C and SPI queue RCA firmware loading from component
bind with request_firmware_nowait(). The firmware loader keeps the
callback module pinned and holds a device reference, but the callback
still uses driver-private HDA state.
Component unbind removes controls and DSP state immediately. Later
device removal tears down the TAS2781 private data, including
codec_lock. If the async firmware callback runs after unbind has
started, it can operate on state that is being torn down.
Cancel or synchronize the async firmware request before removing
controls and DSP state. A queued callback is cancelled, and an
already-running callback is allowed to finish before unbind continues. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: renesas: ironhide: Describe inline ECC carveouts
The DBSC5 DRAM controller protects DRAM content using inline ECC.
The inline ECC utilizes areas of DRAM for its operation, which are
in the DRAM address range, but must not be accessed or modified.
Describe the inline ECC carveout areas used by the DBSC5 controller
on this hardware as reserved-memory, which must not be accessed.
Include DRAM areas which are unprotected by ECC as well, those are
parts of the DRAM which directly precede the ECC carveout.
In case of high DRAM utilization, unless the inline ECC carveouts
are properly reserved, Linux may use and corrupt the memory used
by the DBSC5 DRAM controller for inline ECC, which would lead to
the system becoming unstable. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: tegra - Return ENOMEM when input buffer allocation fails for ccm
Ensure the ENOMEM error value is set when the input buffer allocation
fails in tegra_ccm_do_one_req. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: msm: Disable DMA for kernel console UART
At the moment, concurrent writes from userspace and the kernel to the
console can trigger a race condition that results in an infinite loop of
the same messages printed over and over again. This is most likely to
happen during system startup or shutdown when the init system starts/stops
a large number of system services that interact with various kernel code.
When userspace writes to the TTY device, the driver initiates an
asynchronous DMA transfer and releases the port lock. At the same moment,
the kernel printk path might grab the port lock and re-configure the UART
controller for PIO, without waiting for the DMA operation to complete. It
seems like this collision results in zero progress being reported for the
DMA engine, so the same text is printed to the console over and over again.
For the kernel console, we want a reliable output path that will be
functional even during crashes etc. So rather than implementing complex
code to synchronize the kernel console write routines with the userspace
DMA write routines, simply disable DMA for the console UART instance.
Similar checks exist in many other serial drivers, e.g. 8250_port.c,
imx.c, sh-sci.c etc. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv: Fix race in mshv_irqfd_deassign
mshv_irqfd_deactivate() and the hlist traversal of pt_irqfds_list
require pt->pt_irqfds_lock to be held, but mshv_irqfd_deassign()
omits it. This races with the EPOLLHUP path in mshv_irqfd_wakeup(),
which does take the lock before calling mshv_irqfd_deactivate().
Additionally, mshv_irqfd_deactivate() uses hlist_del() which poisons
the node pointers rather than resetting them. Since
mshv_irqfd_is_active() relies on hlist_unhashed() (checks pprev ==
NULL), a poisoned node still appears active. If a concurrent path calls
mshv_irqfd_deactivate() again on the same irqfd, the guard fails to
prevent a double hlist_del() on poisoned pointers.
Fix both issues:
- Add the missing spin_lock_irq/spin_unlock_irq around the list
traversal in mshv_irqfd_deassign(), matching mshv_irqfd_release().
- Use hlist_del_init() instead of hlist_del() so the node is properly
marked as unhashed after removal, making the is_active guard reliable. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: restore nofs context unconditionally in xfs_trans_roll
When __xfs_trans_commit() fails in xfs_trans_roll(), the NOFS context
is cleared but only restored in the success path. This leaves the
error path without nofs protection, causing a circular lock dependency
between xfs_nondir_ilock_class and fs_reclaim:
CPU0 CPU1
---- ----
lock(&xfs_nondir_ilock_class);
lock(fs_reclaim);
lock(&xfs_nondir_ilock_class);
lock(fs_reclaim);
Fix this by moving xfs_trans_set_context() before the error check so
that nofs context is always restored on the new transaction. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix NULL pointer dereference in nvmet_execute_identify_nslist()
When a host issues an Identify command with CNS 07h (Active Namespace ID
List for a specific I/O Command Set), nvmet_execute_identify_nslist() is
called with match_css set. The command-set filter dereferences req->ns,
but this handler never calls nvmet_req_find_ns(), so req->ns is always
NULL (nvmet_req_init() resets it to NULL). As soon as an enabled
namespace with an NSID greater than the requested value exists,
req->ns->csi dereferences a NULL pointer and oopses.
Besides the crash, the comparison is logically wrong: to filter the list
by command set it must test the command set of the namespace being
iterated, not a single fixed value. Use the loop variable ns->csi. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: reject unrepresentable multicast TVLV offsets
The network and transport header fields in struct sk_buff are 16-bit
offsets from skb->head, and U16_MAX is reserved as the unset transport
header value. batadv_tvlv_call_handler() sets both fields from a received
multicast TVLV without checking whether the TVLV end is representable.
If the end offset exceeds the field's range, skb_set_transport_header()
truncates it so that the transport header precedes the network header.
The negative difference is then returned by skb_network_header_len() as
a large u32. batadv_mcast_forw_packet() consequently accepts an oversized
multicast tracker and accesses memory beyond the skb data.
Add skb_set_transport_header_careful(), an offset-aware counterpart to
skb_reset_transport_header_careful(), which validates the final
head-relative offset before assigning it. Use the new helper in
batadv_tvlv_call_handler() and reject unrepresentable TVLVs before
setting the network header. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: seg6: clear IPv4 control block on IPIP decapsulation
End.DX4 and End.DT4 decapsulate an IPv4 packet through
decap_and_validate() and send it directly to IPv4 routing. The inner
packet therefore bypasses ip_rcv_core(), which normally clears IPCB
before IPv4 interprets skb->cb.
The skb instead retains IP6CB data from the outer packet. IP6CB and
IPCB use the same skb->cb storage, so IP6CB(skb)->lastopt overlaps
IPCB(skb)->opt.optlen and srr, while IP6CB(skb)->nhoff overlaps rr and
ts.
The sender can make the stale optlen byte nonzero with a valid outer
extension-header chain. The reproducers put an eight-byte Destination
Options header immediately after the 40-byte IPv6 header and before the
Segment Routing Header. ipv6_destopt_rcv() records the sender-controlled
Destination Options offset in both lastopt and nhoff, setting them to
40. On the reproduced little-endian x86-64 kernel, IPv4 therefore sees
optlen = 40 and rr = 40.
Both tcp_v4_save_options() and __ip_options_echo() skip option copying
when optlen is zero. Here optlen is 40, so the TCP SYN path allocates
room for 40 bytes of option data and calls __ip_options_echo(). The
stale rr value makes that function read inner packet byte 41 as the
Record Route option length. The reproducers set that sender-controlled
byte to 255, so __ip_options_echo() copies 255 bytes into the 40-byte
option-data area.
Separate End.DX4 and End.DT4 reproducers on the unpatched v7.2-rc5
kernel both produced:
BUG: KASAN: slab-out-of-bounds in __ip_options_echo()
Write of size 255
The relevant End.DX4 call path is:
__ip_options_echo
tcp_v4_route_req
tcp_conn_request
tcp_v4_conn_request
tcp_rcv_state_process
tcp_v4_do_rcv
tcp_v4_rcv
ip_protocol_deliver_rcu
ip_local_deliver_finish
ip_local_deliver
input_action_end_dx4_finish
input_action_end_dx4
The relevant End.DT4 call path is:
__ip_options_echo
tcp_v4_route_req
tcp_conn_request
tcp_v4_conn_request
tcp_rcv_state_process
tcp_v4_do_rcv
tcp_v4_rcv
ip_protocol_deliver_rcu
ip_local_deliver_finish
ip_local_deliver
input_action_end_dt4
tcp_v4_save_options() is inlined into the tcp_v4_route_req() path, so
it does not appear as a separate frame.
When decap_and_validate() handles IPPROTO_IPIP, save the ingress
interface from IP6CB, clear IPCB, and restore the saved value. Doing
this in the common decapsulation path covers End.DX4, End.DT4, and
End.DT46's IPv4 arm.
Use IP6CB(skb)->iif rather than skb->skb_iif. These actions run after
l3mdev processing, which can replace skb_iif with the L3 master;
IP6CB iif still records the receiving interface set at IPv6 ingress. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: fix use-after-free of a master VLAN's multicast context
br_multicast_toggle_one_vlan() clears BR_VLFLAG_MCAST_ENABLED under
br->multicast_lock before stopping a VLAN's multicast context. That is
the teardown handshake: lockless readers gate on the flag through
br_multicast_ctx_should_use() -> br_multicast_ctx_vlan_disabled(), so
once it is cleared under the lock no reader can arm the context again.
For a master VLAN the handshake never runs. __vlan_del() clears
BRIDGE_VLAN_INFO_BRENTRY before calling br_vlan_put_master(), so
br_multicast_toggle_one_vlan(masterv, false) returns early on
!br_vlan_is_brentry(vlan): the flag stays set and br->multicast_lock is
never taken. br_vlan_put_master() then drains the context in
br_multicast_ctx_deinit() and frees the VLAN through call_rcu(), while a
reader still inside rcu_read_lock() sees the context as enabled and
re-arms it. The port and port-VLAN branch of the function has no
br_vlan_is_brentry() test and flips the flag under br->multicast_lock,
so it is not affected.
The reader is the bridge transmit path. For a master VLAN
br_multicast_rcv() selects brmctx = &vlan->br_mcast_ctx with
pmctx = NULL, so IGMP sent to the bridge device re-arms the context's
timers after br_multicast_ctx_deinit() has already stopped them.
BUG: KASAN: slab-use-after-free in detach_if_pending+0x412/0x4a0
Write of size 8 at addr ffff88810ac39918 by task brmc/601
__mod_timer+0x51a/0xc50
br_multicast_host_join+0x25b/0x390
__br_multicast_add_group+0x468/0x530
br_ip4_multicast_add_group+0x1a0/0x260
br_multicast_rcv+0x2cda/0x61e0
br_dev_xmit+0x6c4/0x1540
Allocated by task 610:
br_vlan_add+0x111/0xb40
br_vlan_info+0x370/0x3e0
Freed by task 0:
kfree+0x1a7/0x4f0
rcu_core+0x7dc/0x10a0
Only test br_vlan_is_brentry() when enabling, like the
br_multicast_ctx_vlan_global_disabled() test next to it. Disabling then
always clears BR_VLFLAG_MCAST_ENABLED under br->multicast_lock before
br_multicast_ctx_deinit() drains the context. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: espintcp: fix UAF during close
ZDI reported and analyzed a race condition during close for espintcp
sockets:
espintcp_close() frees emsg->skb via kfree_skb() without holding
any socket lock. Concurrently, the xfrm_trans_reinject work queue
invokes esp_output_tcp_finish() -> espintcp_push_skb() ->
espintcp_push_msgs() -> skb_send_sock_locked(), which reads the
same skb as a data source.
Fix this by adding a synchronize_rcu() call after resetting sk_prot,
since esp_output_tcp_finish() runs under RCU and won't use a socket
with sk_prot == &tcp_prot. Simply taking the socket lock in
espintcp_close() could lead to leaks, if esp_output_tcp_finish()
re-adds an skb in the slot we just freed. After this, the existing
barrier() is no longer needed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/tcp-ao: fix use-after-free of current_key on reconnect to another peer
tcp_inbound_ao_hash() is called before bh_lock_sock_nested() is taken,
with only rcu_read_lock() held. On the fast path for established
sockets, if the rnext_keyid sent by the peer differs from
current_key->sndid, the key the peer asked for is looked up and stored
in current_key. The lookup is inside the RCU read side, but current_key
outlives it.
When the socket is disconnected and connect() is called again for
another peer, tcp_ao_connect_init() unlinks every key that does not
match the new peer and frees it with call_rcu(). If current_key points
at such a key, it is cleared to NULL.
The fast path reads sk_state only once on entry, so a softirq that got
into it while the socket was still established can update current_key
after that loop has already run. The update is inside the RCU read side,
so it comes before the call_rcu() callback, and once the callback frees
the key, current_key is left pointing at freed memory.
The next transmission picks that pointer up in tcp_get_current_key().
tcp_ao_transmit_skb() then reads the traffic key from the freed object,
which is the use-after-free.
Wait for one grace period before unlinking, and only if a key is going
to be removed. By the time tcp_connect() runs the socket is already in
TCP_SYN_SENT, and TCP_AO_ESTABLISHED does not contain TCPF_SYN_SENT, so
a softirq entering after the wait cannot reach the fast path, and the
ones already in it have finished. The existing NULL handling in the loop
is then enough. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: run set info with opener credentials
SMB2 SET_INFO handlers call path-based VFS helpers after checking the
access mask granted to the SMB handle. Those helpers perform their owner,
inode permission and LSM checks using the current ksmbd worker credentials.
Run the complete SET_INFO dispatch with the credentials captured when the
handle was opened. This also removes the separate security information
credential setup and keeps all SET_INFO classes under one credential scope.
Direct override_creds() is used because it can nest with the request
credential overrides already used by rename and link helpers. |
