| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A Missing Release of Memory after Effective Lifetime vulnerability in the Layer 2 Address Learning Daemon (l2ald) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent, unauthenticated attacker to cause a memory leak ultimately leading to a Denial of Service (DoS).
In an EVPN-MPLS scenario, routes learned from remote multi-homed Provider Edge (PE) devices are programmed as ESI routes. Due to a logic issue in the l2ald memory management, memory allocated for these routes is not released when there is churn for these routes. As a result, memory leaks in the l2ald process which will ultimately lead to a crash and restart of l2ald.
Use the following command to monitor the memory consumption by l2ald:
user@device> show system process extensive | match "PID|l2ald"
This issue affects:
Junos OS:
* all versions before 22.4R3-S5,
* 23.2 versions before 23.2R2-S3,
* 23.4 versions before 23.4R2-S4,
* 24.2 versions before 24.2R2;
Junos OS Evolved:
* all versions before 22.4R3-S5-EVO,
* 23.2 versions before 23.2R2-S3-EVO,
* 23.4 versions before 23.4R2-S4-EVO,
* 24.2 versions before 24.2R2-EVO. |
| A Missing Release of Memory after Effective Lifetime vulnerability in the BroadBand Edge subscriber management daemon (bbe-smgd) of Juniper Networks Junos OS on MX Series allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS).
If the authentication packet-type option is configured and a received packet does not match that packet type, the memory leak occurs. When all memory
available to bbe-smgd has been consumed, no new subscribers will be able to login.
The memory utilization of bbe-smgd can be monitored with the following show command:
user@host> show system processes extensive | match bbe-smgd
The below log message can be observed when this limit has been reached:
bbesmgd[<PID>]: %DAEMON-3-SMD_DPROF_RSMON_ERROR: Resource unavailability, Reason: Daemon Heap Memory exhaustion
This issue affects Junos OS on MX Series:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S5,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S2,
* 24.4 versions before 24.4R2,
* 25.2 versions before 25.2R2. |
| A Missing Release of Memory after Effective Lifetime vulnerability in the DHCP daemon (jdhcpd) of Juniper Networks Junos OS on MX Series, allows an adjacent, unauthenticated attacker to cause a memory leak, that will eventually cause a complete Denial-of-Service (DoS).
In a DHCPv6 over PPPoE, or DHCPv6 over VLAN with Active lease query or Bulk lease query scenario, every subscriber logout will leak a small amount of memory. When all available memory has been exhausted, jdhcpd will crash and restart which causes a complete service impact until the process has recovered.
The memory usage of jdhcpd can be monitored with:
user@host> show system processes extensive | match jdhcpd
This issue affects Junos OS:
* all versions before 22.4R3-S1,
* 23.2 versions before 23.2R2,
* 23.4 versions before 23.4R2. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to version 7.1.2-15, a memory leak in the ASHLAR image writer allows an attacker to exhaust process memory by providing a crafted image that results in small objects that are allocated but never freed. Version 7.1.2-15 contains a patch. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, memory leak exists in `coders/msl.c`. In the `WriteMSLImage` function of the `msl.c` file, resources are allocated. But the function returns early without releasing these allocated resources. Versions 7.1.2-15 and 6.9.13-40 contain a patch. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, in `ReadSTEGANOImage()` (`coders/stegano.c`), the `watermark` Image object is not freed on three early-return paths, resulting in a definite memory leak (~13.5KB+ per invocation) that can be exploited for denial of service. Versions 7.1.2-15 and 6.9.13-40 contain a patch. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to version 7.1.2-15, a memory leak exists in `coders/ashlar.c`. The `WriteASHLARImage` allocates a structure. However, when an exception is thrown, the allocated memory is not properly released, resulting in a potential memory leak. Version 7.1.2-15 contains a patch. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, sometimes msl.c fails to update the stack index, so an image is stored in the wrong slot and never freed on error, causing leaks. Versions 7.1.2-15 and 6.9.13-40 contain a patch. |
| Memory leak in ProFTPd 1.2.0rc2 allows remote attackers to cause a denial of service via a series of USER commands, and possibly SIZE commands if the server has been improperly installed. |
| Memory leak in NNTP service in Windows NT 4.0 and Windows 2000 allows remote attackers to cause a denial of service (memory exhaustion) via a large number of malformed posts. |
| Memory leak in FreeBSD 4.5 and earlier allows remote attackers to cause a denial of service (memory exhaustion) via ICMP echo packets that trigger a bug in ip_output() in which the reference count for a routing table entry is not decremented, which prevents the entry from being removed. |
| The do_fork function in Linux 2.4.x before 2.4.26, and 2.6.x before 2.6.6, does not properly decrement the mm_count counter when an error occurs after the mm_struct for a child process has been activated, which triggers a memory leak that allows local users to cause a denial of service (memory exhaustion) via the clone (CLONE_VM) system call. |
| Multiple memory leaks in isakmpd in OpenBSD 3.4 and earlier allow remote attackers to cause a denial of service (memory exhaustion) via certain ISAKMP packets, as demonstrated by the Striker ISAKMP Protocol Test Suite. |
| The audit system in Linux kernel 2.6.6, and other versions before 2.6.13.4, when CONFIG_AUDITSYSCALL is enabled, uses an incorrect function to free names_cache memory, which prevents the memory from being tracked by AUDITSYSCALL code and leads to a memory leak that allows attackers to cause a denial of service (memory consumption). |
| Memory leak in the request_key_auth_destroy function in request_key_auth in Linux kernel 2.6.10 up to 2.6.13 allows local users to cause a denial of service (memory consumption) via a large number of authorization token keys. |
| A vulnerability, which was classified as problematic, was found in TechPowerUp GPU-Z 2.23.0. Affected is the function sub_140001880 in the library GPU-Z.sys of the component 0x8000645C IOCTL Handler. The manipulation leads to memory leak. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| go-crypto-winnative Go crypto backend for Windows using Cryptography API: Next Generation (CNG). Prior to commit f49c8e1379ea4b147d5bff1b3be5b0ff45792e41, calls to `cng.TLS1PRF` don't release the key handle, producing a small memory leak every time. Commit f49c8e1379ea4b147d5bff1b3be5b0ff45792e41 contains a fix for the issue. The fix is included in versions 1.23.6-2 and 1.22.12-2 of the Microsoft build of go, as well as in the pseudoversion 0.0.0-20250211154640-f49c8e1379ea of the `github.com/microsoft/go-crypto-winnative` Go package. |
| Multiple denial-of-service vulnerabilities exist in the affected product. These issues can be triggered through various crafted inputs, including malformed Class 3 messages, memory leak conditions, and other resource exhaustion scenarios. Exploitation may cause the device to become unresponsive and, in some cases, result in a major nonrecoverable fault. Recovery may require a restart. |
| Redis through 8.0.3 allows memory consumption via a multi-bulk command composed of many bulks, sent by an authenticated user. This occurs because the server allocates memory for the command arguments of every bulk, even when the command is skipped because of insufficient permissions. NOTE: this is disputed by the Supplier because abuse of the commands network protocol is not a violation of the Redis Security Model. |
| Undici is an HTTP/1.1 client for Node.js. Prior to versions 5.29.0, 6.21.2, and 7.5.0, applications that use undici to implement a webhook-like system are vulnerable. If the attacker set up a server with an invalid certificate, and they can force the application to call the webhook repeatedly, then they can cause a memory leak. This has been patched in versions 5.29.0, 6.21.2, and 7.5.0. As a workaound, avoid calling a webhook repeatedly if the webhook fails. |
