| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| pupnp is an SDK for development of UPnP device and control point applications. Prior to 2.0.2, raw_to_int in upnp/src/genlib/net/http/httpparser.c parses Content-Length with strtol and casts the resulting long to a 32-bit int before the caller stores it as unsigned int. On LP64 systems, values greater than INT_MAX can truncate or wrap, so the HTTP parser can accept a body length different from the declared value. A remote adjacent-network peer can use the resulting parser disagreement to leave bytes to be interpreted as another request in persistent or proxied contexts, or can make a worker wait for an extremely large body and cause denial of service. This issue is fixed in 2.0.2. |
| pupnp is an SDK for development of UPnP device and control point applications. Prior to 22.0.4, parse_hostport in upnp/src/genlib/net/uri/uri.c synchronously calls getaddrinfo while parse_uri is processing attacker-supplied hostnames from inbound HTTP request targets in upnp/src/genlib/net/http/httpparser.c and GENA SUBSCRIBE CALLBACK headers handled by create_url_list in upnp/src/gena/gena_device.c. A remote unauthenticated peer can choose a slow or nonresponsive hostname and block a bounded miniserver worker for the resolver timeout, allowing a small number of requests to exhaust the thread pool and deny UPnP service. This issue is fixed in 22.0.4. |
| ColdFusion is affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction. |
| Slims (Senayan Library Management Systems) 9 Bulian 9.8.0 allows an authenticated staff user to perform SQL injection via the opac_hide and promoted GET parameters of admin/modules/bibliography/index.php, because escape_string() is applied but the values are concatenated into an unquoted numeric SQL context, leading to error-based information disclosure and arbitrary data extraction. |
| During an upload, curl mishandles HTTP/2 `RST_STREAM` received from the server
(with reason `HTTP_1_1_REQUIRED` or `REFUSED_STREAM`) leading to a use after
free of a `struct Curl_easy` object. |
| The Salon Booking System WordPress plugin before 10.31.11 does not prevent users holding its custom salon staff role from assigning arbitrary capabilities to other accounts when editing a customer, allowing them to escalate any account to administrator and take over the site. |
| WebITR developed by Uniong has a Insecure Deserialization vulnerability. Authenticated remote attackers can use the hard-coded cryptographic key to craft and submit malicious serialized data, thereby executing arbitrary code on the server. |
| A flaw was found in Wildfly. A remote unauthenticated attacker can trigger OutOfMemoryError as CSIv2Util's GSS token decoder reads an attacker-controlled length field without bounds checking and attempts to allocate a byte array of that size. |
| A flaw was found in Undertow. A remote attacker can cause Out of Memory on websockets endpoint without authentication on any @ServerEndpoint class that has any @OnMessage method. This allows an attacker to cause Denial of Service attack without authentication and using only a standard WebSocket handshake. |
| A flaw was found in EAP's IIOP. The listener's NameService would accept bind operations without authentication, allowing an attacker to hijack JNDI lookups and binding them to a malicious ORB, achieving MITM or DoS on further invocations. |
| A flaw was found in EAP's undertow http/1.1 chunked-transfer decoder. missing limits on size and count would allow an attacker to use an unauthenticated connection to drive the JVM to an OutOfMemory error, stopping all deployments on the listener, and achieving Denial of Service. |
| A flaw was found in Picketlink's SP signature validation; a SAML response containing zero assertion elements matching the signature check can allow an attacker to forge a SAML response and auth as any principal with any roles on the protected application. |
| Improper validation of pod identifier uniqueness in aws-network-policy-agent in Amazon EKS Network Policy Agent before v1.4.0 might allow an authenticated remote user to bypass NetworkPolicy enforcement on co-located pods in other namespaces via crafted pod and namespace names that produce pod identifier collisions.
To remediate this issue, users should upgrade to Amazon EKS Network Policy Agent 1.4.0 or later and Amazon VPC CNI Managed Add-on v1.22.4 or later (which includes Network Policy Agent v1.4.0). |
| JQ::Lite versions before 2.51 for Perl execute Perl code embedded in a query's regular expression by compiling it with string eval.
The pattern given to test(), match(), or the match and =~ conditions of select() is placed in a `qr'...'` literal and compiled as source text, so a `(?{ ... })` code block in it runs without `use re 'eval'`. Single quotes in the pattern are escaped, but a code block runs in place and needs none.
An attacker who supplies a query, or text that an application inserts into the pattern of one, can execute arbitrary Perl code in the calling process. |
| The OSDP Control Panel reply parser cp_decode_response() in subsys/mgmt/osdp/src/osdp_cp.c decodes replies from a Peripheral Device into a stack-allocated struct osdp_event. For the REPLY_KEYPPAD and REPLY_RAW reply types, the payload length is taken from the received frame and the only validation performed is that the declared length is self-consistent with the number of payload bytes present in the frame. Because the attacker controls both the length field and the frame length, that check imposes no bound, and the subsequent memcpy() writes into the fixed 64-byte data arrays of struct osdp_event_keypress / struct osdp_event_cardread (OSDP_EVENT_MAX_DATALEN). The sibling REPLY_FMT handler in the same switch already carried the missing > OSDP_EVENT_MAX_DATALEN bound.
The defect is reached from cp_process_reply(), which reads bytes from the OSDP RS-485 channel and passes them through osdp_phy_check_packet() and osdp_phy_decode_packet() before dispatching on the reply ID. Triggering it requires CONFIG_OSDP with CONFIG_OSDP_MODE_CP and an application event callback registered (the normal Control Panel integration), plus a frame carrying a correct SOM, a valid CRC-16, and a matching 2-bit sequence number — all of which are computable or observable by anyone on the bus. No check ties the reply ID to the outstanding command, so an oversized REPLY_KEYPPAD or REPLY_RAW is accepted as the answer to a routine CMD_POLL. A malicious or compromised card reader, or anyone with access to the RS-485 wiring, can supply such a frame; CONFIG_OSDP_SC_ENABLED only helps while a secure channel is active, and a single unauthenticated frame carrying a bad MAC causes sc_deactivate(), after which plaintext replies are again accepted.
With the default CONFIG_OSDP_UART_BUFFER_LENGTH of 256, roughly 180 bytes of fully attacker-chosen data can be written past the end of the stack-allocated event object, over saved registers and the return address on typical Cortex-M and RISC-V frame layouts (Zephyr does not enable stack canaries by default). The impact ranges from a hard crash of the access-control panel to potential control-flow hijack in the context of the OSDP receive thread. The fix adds an OSDP_EVENT_MAX_DATALEN bound to both handlers, capping each memcpy() at the size of its destination. |
| Exposure of SQL Black List to an Unauthorized Actor vulnerability in Apache Kylin.
This issue affects Apache Kylin: from 4 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Exposure of unauthorized cross-project job manipulation vulnerability in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| StreamReadConstraints.maxNameLength (default 50,000 characters) is intended to bound how much memory a single JSON Object property name can consume while being parsed, independently of the much larger maxStringLength (default 100,000,000 characters) that bounds ordinary string values. For parsers built over character input — Reader, String or char[] sources, all served by ReaderBasedJsonParser — that bound is not applied while the name is being accumulated. The code path instead re-uses the string-value length check, which is roughly 2000x larger by default.
In the character-input slow path, ReaderBasedJsonParser._parseName2() accumulates the name into the TextBuffer and, when a segment fills, calls TextBuffer.finishCurrentSegment(), which validates only maxStringLength. The correct check, StreamReadConstraints.validateNameLength(int), is reached afterwards in CharsToNameCanonicalizer.findSymbol(), once the entire name has been scanned to its closing quote. By that point the full name — up to maxStringLength characters — has already been buffered in memory.
A remote attacker who can have a single sufficiently long JSON Object property name parsed through this path can force allocation on the order of 100,000,000 characters (approximately 200 MB, with segment bookkeeping pushing real peak usage higher) before any StreamConstraintsException is thrown, instead of the approximately 50,000-character (about 100 KB) bound the API promises. Repeating this across concurrent requests can exhaust the heap and crash the process. No authentication or user interaction is required. Because StreamReadConstraints.maxDocumentLength is disabled by default (-1), nothing else bounds the token first, so the issue is exploitable under default configuration.
Byte-input parsers are not affected: UTF8StreamJsonParser, UTF8DataInputJsonParser and the non-blocking (async) parsers re-validate maxNameLength on every growth of the name-decode buffer via ParserBase._growNameDecodeBuffer(), rejecting an oversized name after allocating only tens of kilobytes. Applications are exposed when untrusted JSON is parsed from a String, Reader or char[] — for example an HTTP request body already read into a String — rather than from raw UTF-8 bytes.
This issue affects com.fasterxml.jackson.core:jackson-core from 2.16.0 and tools.jackson.core:jackson-core from 3.0.0. Releases before 2.16.0 are not affected, because StreamReadConstraints.maxNameLength was first introduced in jackson-core 2.16.0. |
| Insertion of Sensitive Information into Log File vulnerability in Apache Answer.
This issue affects Apache Answer: through 2.0.2.
Full API keys are written to application logs on every authenticated request, allowing anyone with log-read access to recover and replay active bearer credentials.
Users are recommended to upgrade to version 2.0.3, which fixes the issue. |
| Smithy-RS is a Rust code generation and runtime framework that generates HTTP clients and servers from Smithy interface definitions, powering the AWS SDK for Rust and custom service implementations.
Uncontrolled recursion in the JSON, CBOR, and XML deserializer functions emitted by Amazon smithy-rs code generation could allow remote attackers to cause a denial of service (process abort via stack exhaustion) via a small request containing deeply nested data for a recursive model shape to a generated SDK or server.
To mitigate this issue, users should upgrade to aws-sdk-rust release-2026-06-02 or later. Users building custom servers with smithy-rs codegen should regenerate from smithy-rs release-2026-06-01 or later. |
