| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 8.0.6, the FTP parser in src/app-layer-ftp.c treats a RETR or STOR command sent before PORT or PASV negotiation as a fatal application-layer error instead of a recoverable protocol event. The fatal state disables FTP application-layer parsing for the remainder of the TCP flow, so later commands can evade parser-dependent rules and logging; IPS mode instead drops the flow. This issue is fixed in version 8.0.6. |
| A vulnerability was found in Trusted Domain Project OpenDMARC up to 1.4.2. This vulnerability affects the function strcasecmp in the library libopendmarc/opendmarc_policy.c. The manipulation results in handling of exceptional conditions. The attack can be executed remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in Trusted Domain Project OpenDMARC up to 1.4.2. This affects the function opendmarc_policy_parse_dmarc in the library libopendmarc/opendmarc_policy.c. The manipulation of the argument fo/rf/ri/pct/sp/adkim/aspf/rua/ruf leads to handling of exceptional conditions. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev)
and dereferences the result, causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check, consistent with the
rest of qca_setup(). |
| Improper Check for Unusual or Exceptional Conditions vulnerability in phoenixframework phoenix (Presence JavaScript client) allows an attacker with ordinary channel access to cause a persistent client-side denial of service against every viewer of a presence channel topic.
This vulnerability is associated with program files assets/js/phoenix/presence.js and program routines Presence.syncState and Presence.syncDiff.
The Phoenix JavaScript presence client checks whether a presence already exists with a bare truthiness test (state[key]) instead of an own-property check. Presence keys can be attacker-controlled, because applications track presences under a username or id supplied by the client. A user who joins a channel choosing a key that is an Object.prototype member name (__proto__, constructor, toString, hasOwnProperty, and similar) makes that lookup return JavaScript's built-in Object.prototype instead of undefined. Because the prototype is truthy, the code treats it as an existing presence and reads .metas.map(...) off it, which throws an uncaught TypeError.
The exception propagates out of the presence message handler, so the local state is never updated and onSync() never fires. Because the malicious key is tracked on the server, it is re-pushed on every presence update and keeps re-throwing, so presence sync stays broken for every viewer of that channel topic until the attacker leaves. Both syncState and syncDiff use the same unsafe existence-check pattern. The impact is limited to the affected topic and is a read-time confusion of the prototype object, not a mutation of Object.prototype (it is not prototype pollution).
This issue affects phoenix: from 1.2.0-rc.0 before 1.5.15, from 1.6.0-rc.0 before 1.6.17, from 1.7.0-rc.0 before 1.7.24, and from 1.8.0-rc.0 before 1.8.9; phoenix: from 1.2.0-rc.0 before 1.5.15, from 1.6.0-rc.0 before 1.6.17, from 1.7.0-rc.0 before 1.7.24, and from 1.8.0-rc.0 before 1.8.9. |
| mport is the MidnightBSD Package Manager. Prior to 2.7.8, libmport/util.c did not make every truncated, corrupt, or failed zstd stream fatal in mport_decompress_zstd(), and libmport/fetch.c did not consistently propagate those failures to index-fetch callers. A malicious or faulty mirror could supply compressed package index data that caused ZSTD_decompressStream() or an output write to fail while leaving partial index output available for later use, resulting in package-index integrity loss or denial of service. This issue is fixed in version 2.7.8. |
| A vulnerability was identified in sfturing hosp_order up to 627f426331da8086ce8fff2017d65b1ddef384f8. The affected element is the function MD5.getMD5 of the file ssm_pro/src/main/java/cn/sfturing/utils/MD5.java of the component User Password Handler. The manipulation leads to one-way hash without salt. The attack may be initiated remotely. A high degree of complexity is needed for the attack. The exploitability is described as difficult. The exploit is publicly available and might be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.137.Fina and 4.2.17.Final, io.netty.handler.ssl.SslClientHelloHandler#decode checks the wrong offset before reading the four-byte TLS handshake header, so a ClientHello whose handshake header spans records can cause an IndexOutOfBoundsException and invoke select(ctx, null). This selects the default SslContext instead of the SNI-specific context. In deployments where per-SNI clientAuth=REQUIRE is the sole mutual TLS gate, the default SslContext uses clientAuth=NONE or clientAuth=OPTIONAL, and no application-layer certificate verification exists, an unauthenticated remote attacker can bypass the protected route's mutual TLS requirement. This issue is fixed in versions 4.1.137.Final and 4.2.17.Final. |
| Steeltoe is an open source project that provides a collection of libraries that helps users build cloud-native applications. From 4.0.0 until 4.3.0, EurekaDiscoveryClient deserializes the registry response as one unit, and an unrecognized actionType or status, a non-Boolean isCoordinatingDiscoveryServer, or a nonnumeric timestamp can abort the entire response. A principal that can register or update an instance can cause all connected Steeltoe clients to receive an empty or stale instance list until the malformed registration is removed. The JsonInstanceInfoConverter, BoolStringJsonConverter, and LongStringJsonConverter parsing paths are affected. This issue is distinct from the earlier DataCenterInfo.name parsing vulnerability. This issue is fixed in version 4.3.0. |
| NivoCart through 2.4.0 contains a destructive configuration write vulnerability in the admin password reset controller that allows unauthenticated attackers to disable password recovery by supplying an invalid code parameter. Attackers can send a GET request with a missing or incorrect code to rewrite the config_password setting to 0, disabling self-service password recovery until an administrator manually re-enables it. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: fix handling of zero-length records on the rx_list
Each recvmsg() call must process either
- only contiguous DATA records (any number of them)
- one non-DATA record
If the next record has different type than what has already been
processed we break out of the main processing loop. If the record
has already been decrypted (which may be the case for TLS 1.3 where
we don't know type until decryption) we queue the pending record
to the rx_list. Next recvmsg() will pick it up from there.
Queuing the skb to rx_list after zero-copy decrypt is not possible,
since in that case we decrypted directly to the user space buffer,
and we don't have an skb to queue (darg.skb points to the ciphertext
skb for access to metadata like length).
Only data records are allowed zero-copy, and we break the processing
loop after each non-data record. So we should never zero-copy and
then find out that the record type has changed. The corner case
we missed is when the initial record comes from rx_list, and it's
zero length. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: fix sleep in atomic context in MAC table access
sparx5_set_rx_mode() runs with netif_addr_lock_bh held and iterates
dev->mc via __dev_mc_sync(), which per address calls sparx5_mc_sync() /
sparx5_mc_unsync() -> sparx5_mact_learn() / sparx5_mact_forget(). These
take sparx5->lock, a mutex, and then poll the MAC access command
register with readx_poll_timeout(). A mutex may block, which is not
allowed from atomic context.
Convert the driver to the new .ndo_set_rx_mode_async callback introduced
in commit 3554b4345d85 ("net: introduce ndo_set_rx_mode_async and
netdev_rx_mode_work"). The async callback is invoked from process
context, so the mutex and sleeping completion poll can remain.
Observed with CONFIG_PROVE_LOCKING, CONFIG_DEBUG_SPINLOCK,
CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_ATOMIC_SLEEP enabled:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 217, name: ip
preempt_count: 201, expected: 0
Call trace:
__might_resched+0x144/0x248
__might_sleep+0x48/0x7c
__mutex_lock+0x74/0x850
mutex_lock_nested+0x24/0x30
sparx5_mact_learn+0x78/0x100
sparx5_mc_sync+0x40/0x54
__hw_addr_sync_dev+0xc4/0x170
sparx5_set_rx_mode+0x4c/0x58
__dev_set_rx_mode+0x64/0xa4
__dev_open+0x1ec/0x26c |
| In the Linux kernel, the following vulnerability has been resolved:
clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
devm_clk_get_optional_enabled_with_rate() registers its cleanup action
before setting the clock rate. If setting the rate fails, it attempts to
disable and unprepare a clock that was never enabled. This issue was
spotted while reviewing "rust: clk: add devres-managed clks" [1].
Register the cleanup action only after successfully preparing and enabling
the clock.
[1]: https://lore.kernel.org/rust-for-linux/20260706-clk-type-state-v5-3-67c5f326a16c@collabora.com |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: ubi: Release device reference on busy detach
ubi_detach_mtd_dev() obtains a device reference through ubi_get_device()
before checking whether the UBI device is busy. The busy return path drops
ubi->ref_count but leaves the device reference held, so the device object
cannot be released after a later detach.
Drop the device reference before returning -EBUSY. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix the SCO setup context lifetime
hci_setup_sync() queues a conn_handle_t with a NULL destroy callback, so
the context is only freed if hci_enhanced_setup_sync() actually runs. An
entry that is cancelled instead is leaked, as
_hci_cmd_sync_cancel_entry() does not release entry->data when there is
no destroy callback, and hci_cmd_sync_clear() cancels every pending entry
when the controller is unregistered.
The context also stores a bare hci_conn pointer, so the connection can be
freed while the work is queued. The dequeue in hci_conn_del() does not
cover it either, as it matches on entry->data == conn and entry->data is
the wrapper here. Same problem as commit 2f5d635ad590 ("Bluetooth:
hci_sync: hold conn in hci_connect_acl/le_sync() callbacks").
Hold the connection and release both from a destroy callback. The
submission failure path drops both, since hci_cmd_sync_submit() does not
call the destroy callback when it fails to queue. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Synchronize the error ISR against VINTF (de)init
A user VINTF is torn down by tegra241_cmdqv_deinit_vintf(), which runs from
the destroy callback and from the init-failure unwind in the alloc handler.
It clears the cmdqv->vintfs[] slot and lets the iommufd core free it, but
nothing serializes that against the error interrupt: tegra241_cmdqv_isr()
reads cmdqv->vintfs[idx] and dereferences the vintf. A concurrent error can
make the ISR read a slot mid-clear (a NULL deref) or use a vintf which is
about to be freed (a use-after-free).
deinit_vintf() also returns idx to the IDA before clearing the slot, so a
concurrent create that reuses idx can publish its new vintf into the slot,
only for this teardown to erase it again with the stale NULL store.
On the other end, tegra241_cmdqv_init_vintf() publishes a new vintf with a
plain store to the cmdqv->vintfs[] slot, and the ISR dereferences fields of
a published vintf such as vintf->base. A plain store gives no ordering on a
weakly-ordered CPU, and a stale VINTF_ERR_MAP bit on a reused idx can make
the ISR pick a vintf the moment it is published, before its fields are set
or tegra241_vintf_hw_init() runs.
The cmdqv->vintfs[0] slot stays NULL until tegra241_cmdqv_init_structures()
first creates VINTF0, so the slot 0 read needs the same NULL check.
Publish every slot with an smp_store_release(), and read each slot in the
ISR with an smp_load_acquire() under a NULL check, so the ISR always sees
a fully built vintf or NULL. Also make deinit_vintf() clear the slot, and
synchronize_irq() prior to returning idx to the IDA, so no vintf is freed
under a running handler and no reused idx is clobbered. |
| Improper state validation in Skia in Google Chrome prior to 153.0.8010.52 allowed a remote attacker to obtain cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
lib/test_hmm: fail dmirror_fault() when the mirrored mm is gone
dmirror_fault() is called from the dmirror_read() and dmirror_write()
retry loops after dmirror_do_read() or dmirror_do_write() finds a missing
device page table entry.
If the mirrored mm has already exited, mmget_not_zero() fails. The
current code returns 0 in that case, which tells the caller that faulting
succeeded even though no page was faulted and no device page table entry
was installed. The caller then retries the same address, hits -ENOENT
again, and can loop forever without making progress.
Return -EFAULT instead, so the ioctl fails when the mirrored mm is no
longer faultable. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Abort directly from the hardlockup handler
scx_hardlockup() defers the abort to an irq_work because exit claiming used
to take scx_sched_lock and couldn't run from NMI. The deferral is now
unnecessary - claiming is NMI-safe and asserting ->aborting is exactly what
breaks the live-locks that hard-lock CPUs. Call handle_lockup() directly and
drop the irq_work. This also makes the self-detected case recoverable: the
perf watchdog fires on the hard-locked CPU itself, where a queued irq_work
never runs with IRQs off.
Also fix the return value: %true used to be returned whenever sched_ext was
loaded, suppressing the kernel's hardlockup report even when the abort was
refused. Return %true only when this call initiated the abort. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: RISC-V: Check acpi_get_handle() status in riscv_acpi_add_prt_dep()
In riscv_acpi_add_prt_dep(), the acpi_get_handle() call can fail which
would leave link_handle uninitialized.
Fix it by checking the acpi_get_handle() return status and skip the entry
if it fails. |
