| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix list_del corruption in kfd_criu_resume_svm
The cleanup tail of kfd_criu_resume_svm() walks
svms->criu_svm_metadata_list and kfree()s each struct criu_svm_metadata
without removing it from the list. The list head is left pointing at
freed kmalloc-96 objects.
A second AMDKFD_IOC_CRIU_OP from the same process re-enters: list_empty()
reads the dangling ->next (use-after-free), the loop walks freed entries,
and each is kfree()'d again (double-free). This is reachable by an
unprivileged render-group user via /dev/kfd with no capabilities required.
Add list_del() before the kfree() so the list is properly emptied. The
list_for_each_entry_safe() iterator already caches the next pointer, so
unlinking during the walk is safe.
(cherry picked from commit 6322d278a298e2c1430b9d2697743d3a04b788b1) |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF
Commit f1b4e32aca08 ("can: bcm: use call_rcu() instead of costly
synchronize_rcu()") replaced synchronize_rcu() in bcm_delete_rx_op()
with call_rcu() and introduced the RX_NO_AUTOTIMER flag.
However, this flag check was omitted for thrtimer in the packet rx
fast-path. During BCM RX operation teardown, a concurrent RCU reader
(bcm_rx_handler) can race and re-arm thrtimer via
bcm_rx_update_and_send() after call_rcu() has been scheduled. Once
the RCU grace period elapses, bcm_op is freed. The subsequently
firing thrtimer then dereferences the deallocated op, causing a UAF.
Adding flag checks to the rx fast-path (bcm_rx_update_and_send) does not
fully close the TOCTOU race and introduces latency for every CAN frame.
Conversely, calling hrtimer_cancel() directly inside the RCU callback
(softirq context) is fatal as hrtimer_cancel() can sleep, triggering
a "scheduling while atomic" panic.
Resolve this by deferring the timer cancellation and memory free to a
dedicated unbound workqueue (bcm_wq). The RCU callback now queues a
work item to bcm_wq, which safely cancels both timers and deallocates
memory in sleepable process context. A dedicated workqueue is used to
prevent system-wide WQ saturation and is cleanly flushed/destroyed
on module unload to avoid rmmod page faults.
Since the deferred work can now outlive the calling context by an
unbounded amount, also take a reference on op->sk when it is assigned
and drop it only once the deferred work has cancelled both timers, so a
socket can no longer be freed out from under a still-armed timer whose
callback (bcm_send_to_user()) dereferences op->sk. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832: fix use-after-free in rtl2832_remove()
cancel_delayed_work_sync() is called before i2c_mux_del_adapters()
in rtl2832_remove(). While the cancel waits for any running instance
of i2c_gate_work to finish, it does not prevent the timer from being
rescheduled by a concurrent thread.
During probe, the r820t_attach() call attempts I2C transfers through
the mux adapter. These transfers go through i2c_mux_master_xfer(),
which calls rtl2832_deselect() after the transfer completes,
rescheduling i2c_gate_work via schedule_delayed_work(). If this
transfer is still in flight when rtl2832_remove() runs,
rtl2832_deselect() can reschedule i2c_gate_work after it has been
cancelled, causing a use-after-free when kfree(dev) is called.
Fix this by calling i2c_mux_del_adapters() before
cancel_delayed_work_sync(). Once the mux adapter is unregistered, no
new I2C transfers can go through it, so rtl2832_deselect() can no
longer reschedule i2c_gate_work. The subsequent
cancel_delayed_work_sync() is then guaranteed to be final. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: Fix session UAF in set_termios
rfcomm_tty_set_termios() tests dlc->session without rfcomm_mutex and
later passes the pointer to rfcomm_send_rpn(). The latter dereferences
both session->initiator and session->sock. Meanwhile, krfcommd can
unlink the DLC and free the session while holding rfcomm_mutex.
The race can proceed as follows:
TTY ioctl task krfcommd
-------------- --------
load dlc->session
enter rfcomm_send_rpn()
lock rfcomm_mutex
clear dlc->session
free session
unlock rfcomm_mutex
read session->initiator
KASAN reported:
BUG: KASAN: slab-use-after-free in rfcomm_send_rpn+0x297/0x2a0
Read of size 4 at addr ffff88810012a850 by task poc/92
Call Trace:
rfcomm_send_rpn+0x297/0x2a0
rfcomm_tty_set_termios+0x50d/0x850
tty_set_termios+0x596/0x950
set_termios+0x46a/0x6e0
tty_mode_ioctl+0x152/0xbd0
tty_ioctl+0x915/0x1240
__x64_sys_ioctl+0x134/0x1c0
Allocated by task 92:
rfcomm_session_add+0x9e/0x2e0
rfcomm_dlc_open+0x8b1/0xe00
rfcomm_dev_activate+0x85/0x1a0
rfcomm_tty_open+0x90/0x280
Freed by task 68:
kfree+0x131/0x3c0
rfcomm_session_del+0x119/0x180
rfcomm_run+0x737/0x4710
Add rfcomm_dlc_send_rpn(), which holds rfcomm_mutex while it verifies
that the DLC is still attached and sends the RPN frame. Have the TTY
path use the helper and drop its unlocked session check. This keeps the
session valid through both the frame construction and socket send. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent lockup in requeue-PI during signal/ timeout wakeup
During wait-requeue-pi (task A) and requeue-PI (task B) the following
race can happen:
Task A Task B
futex_wait_requeue_pi()
futex_setup_timer()
futex_do_wait()
futex_requeue()
CLASS(hb, hb1)(&key1);
CLASS(hb, hb2)(&key2);
*timeout*
futex_requeue_pi_wakeup_sync()
requeue_state = Q_REQUEUE_PI_IGNORE
*blocks on hb->lock*
futex_proxy_trylock_atomic()
futex_requeue_pi_prepare()
Q_REQUEUE_PI_IGNORE => -EAGAIN
double_unlock_hb(hb1, hb2)
*retry*
Task B acquires both hb locks and attempts to acquire the PI-lock of the
top most waiter (task B). Task A is leaving early due to a signal/
timeout and started removing itself from the queue. It updates its
requeue_state but can not remove it from the list because this requires
the hb lock which is owned by task B.
Usually task A is able to swoop the lock after task B unlocked it.
However if task B is of higher priority then task A may not be able to
wake up in time and acquire the lock before task B gets it again.
Especially on a UP system where A is never scheduled.
As a result task A blocks on the lock and task B busy loops, trying to
make progress but live locks the system instead. Tragic.
This can be fixed by removing the top most waiter from the list in this
case. This allows task B to grab the next top waiter (if any) in the
next iteration and make progress.
Remove the top most waiter if futex_requeue_pi_prepare() fails.
Let the waiter conditionally remove itself from the list in
handle_early_requeue_pi_wakeup(). |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix UAF when sending a message
In afs_make_call(), there's a race with async call reception and
destruction. If a call is dispatched that doesn't have call->write_iter
set (used to specify the data content for FS.StoreData), then the first
rxrpc_kernel_send_data() will not set MSG_MORE in the msghdr.
Once rxrpc_send_data() queues the last request packet, the response could
come in at any time and cause the call to be completed and put. However,
afs_make_call() will look at the call again to see it ->write_iter should
be handled - something it's only allowed to do if it has its own ref on the
call. Whilst this is the case for synchronous calls, it isn't true for
async calls such as FS.FetchData.
There's also a potential UAF in afs_make_call() in the event that an
asynchronous call is being sent, but the call fails in some way (e.g. it
gets aborted from the server). The problem there is that afs_make_call()
tries to abort a call if the rxrpc send fails, but the asynchronous
notification from rxrpc may have caused the afs_call to be torn down.
generic/650 plays games with randomly taking CPUs offline, and can
interject a significant delay such that the call is deallocated before
afs_make_call() gets to check call->write_iter - and a UAF ensues (caught
by KASAN).
BUG: KASAN: slab-use-after-free in afs_make_call+0x1c90/0x2210 [kafs]
Read of size 8 at addr ffff888035e050e8 by task fsstress/1409
Fix this by making afs_make_op_call() give the op->call its own ref rather
than transferring the caller's ref to it and then dropping the ref when
afs_make_call() returns.
This also means that the afs_make_call() func never loses its ref on the
call now. |
| llama.cpp builds b7492 through the latest b9060 contains a use-after-free vulnerability in llama-server affecting six tokenization endpoints (/tokenize, /detokenize, /infill, /apply-template, /rerank, and /anthropic/count_tokens) that bypass the task queue and access ctx_server.vocab directly on HTTP worker threads. Attackers can exploit a time-of-check-time-of-use race condition where the main thread destroys and frees vocab after the synchronization lock is released but before the handler finishes using it, causing a crash or potential code execution when --sleep-idle-seconds is configured. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: don't re-enter an instance callback that is still running
The userspace-driven timer (utimer) TRIGGER ioctl calls
snd_timer_interrupt() directly with no serialization, so two threads
triggering the same utimer can run snd_timer_interrupt() on one
snd_timer concurrently.
snd_timer_process_callbacks() drops timer->lock around each instance
callback and marks the in-flight callback with the single
SNDRV_TIMER_IFLG_CALLBACK bit; snd_timer_close_locked() waits on that
bit to drain an in-flight callback before freeing the instance. The bit
cannot represent two concurrent callbacks: when a second interrupt
re-queues an instance whose callback is still running, both run at once,
the first to finish clears the bit, and the close-path drain then frees
the instance (and its callback_data) while the other callback is still
live - a use-after-free reachable by any user able to open
/dev/snd/timer, both via a user timer instance and via a sequencer queue
timer bound to the utimer.
snd_timer_interrupt() sets IFLG_CALLBACK before dropping timer->lock, so
a concurrent interrupt already observes it under the lock. Skip
re-queuing an instance (and its slaves) to the ack/sack list while its
callback is in flight; the accumulated pticks are delivered on the next
tick, so no event is lost. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: pin conn during async oplock break notification
smb2_oplock_break_noti() and smb2_lease_break_noti() store a ksmbd_conn
pointer in an async ksmbd_work and then queue that work on ksmbd-io. The
work only increments conn->r_count, which prevents teardown from passing
the pending-request wait after the increment, but it does not pin the
struct ksmbd_conn object.
If connection teardown races with an oplock break notification, the last
conn reference can be dropped before the queued worker finishes. The
worker then uses the freed conn in ksmbd_conn_write() and
ksmbd_conn_r_count_dec().
Take a real conn reference when publishing the conn pointer to the async
work item, and drop it after the notification work has decremented
r_count. Apply the same lifetime rule to lease break notification, which
uses the same work->conn pattern. |
| In the Linux kernel, the following vulnerability has been resolved:
amt: fix use-after-free in AMT delayed works
When an AMT device is removed, pending delayed works can still access
the freed amt_dev structure, which may result in kernel crashes or
memory corruption.
amt_dev_stop() cancels req_wq and discovery_wq with
cancel_delayed_work_sync(), but these works can be scheduled again
from event_wq after the cancellation. This allows delayed works to
access the freed amt_dev structure after the netdev has been released.
The following is a simple race scenario:
CPU0 CPU1
amt_dev_stop()
cancel_delayed_work_sync()
amt_event_work()
mod_delayed_work(req_wq)
free netdev
req_wq accesses freed amt_dev
Use disable_delayed_work_sync() in amt_dev_stop() to prevent req_wq and
discovery_wq from being queued again and wait for running work items
to complete.
The delayed works are disabled after initialization in
amt_newlink() and enabled only when the device is successfully opened.
This keeps the delayed work lifecycle synchronized with the lifetime
of the AMT device. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix double free and use-after-free in aux device error paths
When auxiliary_device_add() fails in idpf_plug_vport_aux_dev() or
idpf_plug_core_aux_dev(), the err_aux_dev_add label calls
auxiliary_device_uninit() and falls through to err_aux_dev_init. The
uninit call will trigger put_device(), which invokes the release
callback (idpf_vport_adev_release / idpf_core_adev_release) that frees
iadev. The fall-through then reads adev->id from the freed iadev for
ida_free() and double-frees iadev with kfree().
Free the IDA slot and clear the back-pointer before uninit, while adev
is still valid, then return immediately.
Commit 65637c3a1811 ("idpf: fix UAF in RDMA core aux dev deinitialization")
fixed the same use-after-free in the matching unplug path in this file but
missed both probe error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tp_meter: directly shut down timer on cleanup
batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by
timer_delete() to guard against the timer handler re-arming itself between
the two calls. This double-deletion hack relied on the sending status being
set to 0 to suppress re-arming.
Replace both calls with a single timer_shutdown_sync(). This function both
waits for any running timer callback to complete (like timer_delete_sync())
and permanently disarms the timer so it cannot be re-armed afterwards,
making re-arming prevention unconditional and self-documenting.
The re-arming property is also required because otherwise:
1. context 0 (batadv_tp_recv_ack()) checks in
batadv_tp_reset_sender_timer() if sending is still 1 -> it is
2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in
this process forces the kthread to stop timer in
batadv_tp_sender_cleanup()
3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the
timer -> but the reference for it is already gone |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: Use set_bit() and test_bit() at worker->flags
Utilize set_bit() and test_bit() on worker->flags within io_uring/io-wq
to address potential data races.
The structure io_worker->flags may be accessed through various data
paths, leading to concurrency issues. When KCSAN is enabled, it reveals
data races occurring in io_worker_handle_work and
io_wq_activate_free_worker functions.
BUG: KCSAN: data-race in io_worker_handle_work / io_wq_activate_free_worker
write to 0xffff8885c4246404 of 4 bytes by task 49071 on cpu 28:
io_worker_handle_work (io_uring/io-wq.c:434 io_uring/io-wq.c:569)
io_wq_worker (io_uring/io-wq.c:?)
<snip>
read to 0xffff8885c4246404 of 4 bytes by task 49024 on cpu 5:
io_wq_activate_free_worker (io_uring/io-wq.c:? io_uring/io-wq.c:285)
io_wq_enqueue (io_uring/io-wq.c:947)
io_queue_iowq (io_uring/io_uring.c:524)
io_req_task_submit (io_uring/io_uring.c:1511)
io_handle_tw_list (io_uring/io_uring.c:1198)
<snip>
Line numbers against commit 18daea77cca6 ("Merge tag 'for-linus' of
git://git.kernel.org/pub/scm/virt/kvm/kvm").
These races involve writes and reads to the same memory location by
different tasks running on different CPUs. To mitigate this, refactor
the code to use atomic operations such as set_bit(), test_bit(), and
clear_bit() instead of basic "and" and "or" operations. This ensures
thread-safe manipulation of worker flags.
Also, move `create_index` to avoid holes in the structure. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix UAF in smc_cdc_rx_handler() by pinning the socket
smc_cdc_rx_handler() looks up the connection by token under the link
group's conns_lock, drops the lock, and then dereferences conn and the
smc_sock derived from it, ending in sock_hold(&smc->sk) inside
smc_cdc_msg_recv(). No reference is held across the lock release.
The only reference pinning the socket while the connection is
discoverable in the link group is taken in smc_lgr_register_conn()
(sock_hold) and dropped in __smc_lgr_unregister_conn() (sock_put), both
under conns_lock. Once the handler drops conns_lock, a concurrent
close() -> smc_release() -> smc_conn_free() -> smc_lgr_unregister_conn()
can drop that reference and free the smc_sock, so the handler's later
sock_hold() runs on freed memory:
WARNING: lib/refcount.c:25 at refcount_warn_saturate
Workqueue: rxe_wq do_work
refcount_warn_saturate (lib/refcount.c:25)
smc_cdc_msg_recv (net/smc/smc_cdc.c:430)
smc_cdc_rx_handler (net/smc/smc_cdc.c:502)
smc_wr_rx_tasklet_fn (net/smc/smc_wr.c:445)
tasklet_action_common (kernel/softirq.c:938)
handle_softirqs (kernel/softirq.c:622)
Kernel panic - not syncing: panic_on_warn set
Only SMC-R is affected. The SMC-D receive tasklet is stopped by
tasklet_kill(&conn->rx_tsklet) in smc_conn_free() before the connection
is unregistered, so it cannot run concurrently with the free.
Take the socket reference while still holding conns_lock, so the
registration reference can no longer be the last one, and drop it once
the handler is done. |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: core: fix race in driver_override_show() and use core helper
The driver_override_show function reads the driver_override string
without holding the device_lock. However, the store function modifies
and frees the string while holding the device_lock. This creates a race
condition where the string can be freed by the store function while
being read by the show function, leading to a use-after-free.
To fix this, replace the rpmsg_string_attr macro with explicit show and
store functions. The new driver_override_store uses the standard
driver_set_override helper. Since the introduction of
driver_set_override, the comments in include/linux/rpmsg.h have stated
that this helper must be used to set or clear driver_override, but the
implementation was not updated until now.
Because driver_set_override modifies and frees the string while holding
the device_lock, the new driver_override_show now correctly holds the
device_lock during the read operation to prevent the race.
Additionally, since rpmsg_string_attr has only ever been used for
driver_override, removing the macro simplifies the code. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync
hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing
both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was
obtained from an RCU-protected iteration over hdev->conn_hash.list and
is not valid once these locks are dropped. A concurrent disconnect can
free the hci_conn between the unlock and the dereference, causing a
use-after-free read.
The cancellation mechanism in hci_conn_del() cannot prevent this because
hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL:
hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL);
While hci_conn_del() dequeues with data=conn:
hci_cmd_sync_dequeue(hdev, NULL, conn, NULL);
Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never
matches, and the pending work item is not cancelled.
Fix this by saving conn->conn_timeout into a local variable while the
locks are still held, so the stale conn pointer is never dereferenced
after unlock.
This is the same class of bug as the one fixed by commit 035c25007c9e
("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which
addressed the identical pattern in a different function.
This vulnerability was identified using 0sec.ai, an open-source
automated security auditing platform (https://github.com/0sec-labs). |
| In the Linux kernel, the following vulnerability has been resolved:
fhandle: fix UAF due to unlocked ->mnt_ns read in may_decode_fh()
may_decode_fh() accesses mount::mnt_ns without holding any locks; that
means the mount can concurrently be unmounted, and the mnt_namespace can
concurrently be freed after an RCU grace period.
This race can happens as follows, assuming that the mount point was
created by open_tree(..., OPEN_TREE_CLONE):
thread 1 thread 2 RCU
__do_sys_open_by_handle_at
do_handle_open
handle_to_path
may_decode_fh
is_mounted
[mount::mnt_ns access]
[mount::mnt_ns access]
__do_sys_close
fput_close_sync
__fput
dissolve_on_fput
umount_tree
class_namespace_excl_destructor
namespace_unlock
free_mnt_ns
mnt_ns_tree_remove
call_rcu(mnt_ns_release_rcu)
mnt_ns_release_rcu
mnt_ns_release
kfree
[mnt_namespace::user_ns access] **UAF**
Fix it by taking rcu_read_lock() around the mount::mnt_ns access, like
in __prepend_path().
Additionally, document the semantics of mount::mnt_ns, and use WRITE_ONCE()
for writers that can race with lockless readers.
This bug is unreachable unless one of the following is set:
- CONFIG_PREEMPTION
- CONFIG_RCU_STRICT_GRACE_PERIOD
because it requires an RCU grace period to happen during a syscall without
an explicit preemption.
This doesn't seem to have interesting security impact; worst-case, it could
leak the result of an integer comparison to userspace (from the level
check in cap_capable()), cause an endless loop, or crash the kernel by
dereferencing an invalid address. |
| FreeRDP before 3.22.0 contains a use-after-free vulnerability in dvcman_channel_close and dvcman_call_on_receive due to improper synchronization of channel_callback access. A malicious RDP server can trigger a race condition by sending DYNVC_DATA and DYNVC_CLOSE messages concurrently, causing heap-use-after-free in the drdynvc client thread and potentially enabling remote code execution or denial of service. |
| Oj (Optimized JSON) is a JSON parser and Object marshaller packaged as a Ruby gem. Prior to 3.17.2, Oj::Doc iterators (each_value, each_child, each_leaf) were vulnerable to a heap use-after-free. When a Ruby block yielded during iteration calls doc.close or d.close, the document's heap memory is freed while the C iterator is still running. When control returns from the block, the iterator reads from the freed region, producing a use-after-free accessible from pure Ruby. This issue has been fixed in version 3.17.2. |
