Export limit exceeded: 409964 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409964 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-86413 | 1 Curl | 1 Curl | 2026-10-18 | 5.3 Medium |
| A flaw was found in curl. When curl is configured to follow HTTP redirects while performing Negotiate authentication using system-provided Kerberos credentials, it may forward authentication details to an unrelated destination. A malicious server can exploit this flaw by redirecting the client to a target URL containing embedded user credentials, resulting in information disclosure of sensitive authentication data. | ||||
| CVE-2026-86414 | 1 Curl | 1 Curl | 2026-10-18 | 6.5 Medium |
| A flaw was found in curl. A malicious or compromised HTTP proxy server can trick curl into sending authentication credentials intended for the target destination server directly to the proxy itself. When establishing a connection tunnel, if the proxy replies with an HTTP 401 Unauthorized status code instead of a proxy authentication challenge, curl mishandles the response and transmits the origin server's credentials. This issue leads to information disclosure, allowing an untrusted proxy to intercept sensitive passwords and authentication tokens. | ||||
| CVE-2026-87861 | 1 Curl | 1 Curl | 2026-10-18 | 3.7 Low |
| A flaw was found in curl. When ambient user credentials—where authentication is handled implicitly without providing a username—are used, curl may improperly reuse an existing connection authenticated via Negotiate for a different server origin. This improper connection reuse can cause requests intended for one server to be transmitted over an established connection to another, potentially resulting in information disclosure. | ||||
| CVE-2026-92387 | 1 Curl | 1 Curl | 2026-10-18 | 3.7 Low |
| A flaw was found in curl. When communicating with a malicious server using protocols such as FTP, IMAP, POP3, or SMTP, the server can trigger an infinite loop by continuously transmitting data while omitting the final control response line. This behavior bypasses configured transfer timeouts, indefinitely blocking concurrent transfers and resulting in a Denial of Service (DoS). | ||||
| CVE-2026-92391 | 1 Curl | 1 Curl | 2026-10-18 | 3.7 Low |
| A flaw was found in curl. An attacker could supply deeply nested Multipurpose Internet Mail Extensions (MIME) structures to an application utilizing the libcurl library. During memory cleanup in the curl_mime_free function, excessive recursive calls exhaust available stack memory, leading to an application crash and a Denial of Service (DoS). | ||||
| CVE-2026-94265 | 1 Curl | 1 Curl | 2026-10-18 | 3.1 Low |
| A flaw was found in curl. When processing an HTTP redirect to an address containing user credentials, curl improperly retains and retransmits authentication state. A malicious server can exploit this behavior by redirecting curl to an untrusted destination, forcing the client to transmit sensitive authentication tokens, such as Kerberos tickets, to the third party. This flaw can lead to unauthorized information disclosure of user credentials across domain boundaries. | ||||
| CVE-2026-94266 | 1 Curl | 1 Curl | 2026-10-18 | 3.3 Low |
| A flaw was found in curl. This vulnerability can lead to information disclosure by inadvertently revealing authentication credentials. When curl retrieves credentials from a local configuration file (such as a .netrc file), requesting the effective URL metadata can cause the returned destination address to improperly include those secret credentials. A local user may exploit this issue to view sensitive authentication tokens if an application or script queries and logs or displays the resolved URL. | ||||
| CVE-2026-98701 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: release mesh path quota on failed additions Repeated failed or duplicate mesh path additions can exhaust MESH_MAX_MPATHS while the path table holds fewer paths, which stops new paths to reachable destinations from being created. mesh_path_add() reserves a slot before allocating and inserting a path. If allocation fails, the function returns without releasing the slot. If the rhashtable insertion reports an error or an existing destination, the function discards its candidate but retains the reservation. No new path is installed in any of these cases. Release the reservation whenever the candidate is not installed. | ||||
| CVE-2026-98706 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: drain PS delivery work during station teardown Removing an AP or mesh station can notify the driver and wake TXQs after the station has already been removed from the driver, and can update num_sta_ps and the power-save queues after station cleanup has purged them. sta_deliver_ps_frames() tests sta->dead only before it starts delivery. A worker that passes that test can be delayed while teardown sets sta->dead and removes the station from the driver; when it resumes it still runs the full delivery. The existing cancel_work_sync() sits near the end of __cleanup_single_sta(), after the final driver state transition and after PS accounting and queue purging, so it drains the worker only once the state it has to protect has already changed. Before commit d34ba2168a3c ("mac80211: don't delay station destruction") cleanup was deferred through the same ordered workqueue as the delivery work, which kept the two ordered. Cancel the work after setting sta->dead and before moving the driver state, and move the existing cancellation to the start of __cleanup_single_sta(). The first drain closes the driver-lifetime window; driver callbacks during the remaining state transitions can still queue drv_deliver_wk through ieee80211_sta_block_awake(), so retain the second drain at the start of __cleanup_single_sta(). That drain also covers insertion failures, which reach cleanup without setting sta->dead. | ||||
| CVE-2026-98707 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: shut down RX BA session timer on teardown Tearing down an RX BA session can leave the session timer queued on a freed tid_rx. Later timer-wheel processing and the timer callback itself then run against freed memory. An RX BAR handler can dereference tid_rx under RCU before teardown unpublishes it and stay in its read-side critical section while teardown deletes the session timer. The stale handler can then rearm the timer after timer_delete_sync() returns and before the RCU callback frees tid_rx. Use timer_shutdown_sync() so rearm attempts become ineffective once teardown starts. Keep reorder_timer unchanged: teardown marks the session removed under reorder_lock and its release path checks that state before rearming. session_timer has no equivalent guard because ieee80211_rx_h_ctrl() rearms it before taking reorder_lock. | ||||
| CVE-2026-98708 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: keep paired old chanctx alive An in-place replacement keeps reciprocal replace_ctx pointers between the old WILL_BE_REPLACED chanctx and the new REPLACES_OTHER chanctx. However, the early free paths only consider assigned and reserved link users when deciding whether to free the old chanctx. That lets the old chanctx be freed too early while the replacement partner still points back to it, either when the last assigned link is released or when that link successfully reassigns to another existing context. Later unreserve and switch-finalization paths can then follow a stale replace_ctx pointer. Keep a paired old chanctx alive until the replacement pair has been torn down. Apply the same check to both __ieee80211_link_release_channel() and ieee80211_link_use_reserved_reassign(). If the replacement is later abandoned, ieee80211_link_unreserve_chanctx() already tears down the pairing before freeing the old chanctx once no users remain. | ||||
| CVE-2026-98709 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: count only matching reservations in reserved switch ieee80211_vif_use_reserved_switch() validates a replacement by counting assigned links on ctx->replace_ctx and treating reservations too broadly. A link can still be assigned to the old channel context while holding a reservation that belongs to a different replacement operation. That can make the current replacement appear complete too early. If another link finalizes first, the function can free the WILL_BE_REPLACED chanctx while the unmatched link and driver still use it, leading to a use-after-free in later beacon generation. Require an in-place reservation to point at the current replacement context, and require the reserved and assigned contexts to be the matching replacement pair, before counting or moving the link. | ||||
| CVE-2026-98711 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cw1200: fix TX padding OOB read leaking heap data to device The TX path rounds the transfer size up to the bus alignment (align_size(), up to 511 bytes for SDIO, 1 byte for SPI) but sends the padded length straight from the frame buffer, which has no room reserved for the padding. cw1200_data_write() therefore reads past the end of the frame and the bus transfer carries those bytes to the device. A bogus device can collect up to 511 bytes of kernel heap data per TX frame. The RX path does not have this problem: it allocates the skb with the aligned length (alloc_len) before reading. Compute the exact padding with the bus align_size() callback, make sure queued TX frames have tailroom for it, and zero the padding bytes before the transfer so nothing past the frame is exposed. This is not expected to change driver behavior on most cases: frame contents and transfer sizes are unchanged, only the content of the padding bytes (previously undefined stale memory, now zero), which the device never reads since the WSM header carries the real frame length. The skb expansion can only fail under memory exhaustion, in which case the frame is dropped like on the existing error paths of cw1200_tx(). Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-98712 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Take a refcount on IRQs referenced by last_lr_irq Referencing the last interrupt inserted in an LR is rather fragile, as this interrupt can vanish if a concurrently unmapped LPI. Solve this by bumping up the refcount on the interrupt when populating last_lr_irq, and drop it at vgic_prune_ap_list() time, when LPIs are being reclaimed. | ||||
| CVE-2026-98713 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Apply the fine-grained UNDEFs without FEAT_FGT FGUs don't actually require hardware support, so don't gate fgt trap config insertion on FGT. This is the only action required to allow FGUs always, as kvm_calculate_traps() already computes the FGU bits with or without FEAT_FGT. This also fixes a spurious WARN when a TLBI OS is run on a guest in vEL1 without FEAT_TLBIOS on non FEAT_FGT hardware. In this configuration the course-grained HCR_EL2.TTLBOS trap reaches the handler handle_tlbi_el1(), which expects an EL1 TLBI only from vEL2. With FGUs enabled the UNDEF will be injected without needing the specific handler. [oliver: Take Wei-Lin's suggested changelog] | ||||
| CVE-2026-98715 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Preserve TLB control (i.e. pending TLB flush) on failed VMRUN Don't reset the VMCB's TLB control back to "do nothing" on a failed VMRUN, as empirical testing shows that the CPU performs the requested TLB flush if and only if VMRUN is successful, i.e. clearing TLB control on a failed VMRUN effectively drops a TLB flush. Explicitly track the need to flush all ASIDs on a per-CPU basis, as the ASID reuse condition is tied to the pCPU, not to the vCPU. As a bonus, this also obviates the need to avoid clobbering FLUSH_ALL_ASID with TLB_CONTROL_FLUSH_ASID, e.g. in svm_flush_tlb_asid(). Deliberately don't bother saving/restoring the "old" tlb_ctl on failure, in quotes because it's not exactly the old tlb_ctl, it's the tlb_ctl from after pre_svm_run(), but before updating tlb_ctl for flush_all_asids. If VMRUN fails and TLB_CONTROL_FLUSH_ALL_ASID is forced, then the next successful run of the VMCB *may* unnecessarily flush all ASIDs, which strictly speaking could result in noisy neighbor issues. However, the fact that new_asid() is already guest-triggerable, because of KVM's flawed behavior of clearing the ASID on emulated INIT, means that a guest can already trigger a flush of all ASIDs at roughly the same rate. And once KVM stops clobbering the ASID on emulated INIT, *or* assigns a static ASID to each vCPU, this flaw goes away. | ||||
| CVE-2026-98716 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use the active VMCB's MSR bitmap when checking if MSR is intercepted Use the MSR permission bitmap of the active VMCB instead of assuming that KVM is always using vmcb02's bitmap when L2 is active, as KVM uses msrpm02 if and only if L1 wants to intercept MSR accesses, i.e. if and only if KVM needs to merge msprm01 with msrpm12. Don't bother tracking the virtual address of the bitmap that's being used, as __va() is cheap on x86, and caching the virtual address would introduce yet another source of potentially stale information. | ||||
| CVE-2026-98717 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Bail from shadow walks if the root is invalid or a dummy When walking shadow page tables, immediately terminate the walk if the root is a "dummy" root, i.e. a root whose top-level page table is backed by the zero page, but otherwise doesn't exist. If memslot creation races with a stage-2 page fault (EPT violation or #NPF) from L2, then if the stars align, KVM will attempt to walk shadow page tables using the zero page and hit a NULL pointer deref. BUG: kernel NULL pointer dereference, address: 0000000000000021 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP CPU: 30 UID: 1000 PID: 941 Comm: qemu Not tainted 7.2.0-rc2-1b731e5ded48-next-vm #1741 PREEMPTLAZY Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__kvm_mmu_invalidate_addr+0xea/0x210 [kvm] Call Trace: <TASK> kvm_mmu_invalidate_addr+0x92/0xe0 [kvm] __kvm_inject_emulated_page_fault+0x67/0x80 [kvm] ept_page_fault+0x160/0x850 [kvm] kvm_mmu_do_page_fault+0x102/0x1f0 [kvm] kvm_mmu_page_fault+0x8e/0x6b0 [kvm] vmx_handle_exit+0x163/0x640 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x960/0x2120 [kvm] kvm_vcpu_ioctl+0x2c7/0x970 [kvm] __x64_sys_ioctl+0x90/0xd0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f606d0b53bb Opportunistically harden the shadow walks against fully invalid roots, but WARN, as all callers are expected/required to pre-check for a valid root. Don't WARN in the dummy root case as the whole point of using a dummy root is to provide a root that's valid enough to enter the guest, i.e. it should Just Work for all flows except those that *need* to know about dummy roots. Alternatively, KVM could allocate a dedicated page and associated shadow page structure for the dummy root, which is very tempting as it such an approach should be more resilient against unexpected behavior. But that would be a much larger and thus riskier change than simply terminating walks of dummy roots. | ||||
| CVE-2026-98718 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Do cache maintenance on the source VM *before* clearing SEV state Explicitly flush caches after intra-host migration before clearing "SEV active" on the source VM, as doing cache maintenance afterwards creates a tiny window where memory reclaim could return memory to the host without performing a cache flush, e.g. as pointed out by Sashiko: CPU1 in sev_migrate_from(): src->active = false; CPU2 running concurrent unmap: Since active is false, the automatic cache flush in sev_guest_memory_reclaimed is skipped. The host frees and reallocates the page. CPU1 in sev_migrate_from(): sev_writeback_caches(src_kvm); Executes a hardware cache flush (wbnoinvd), which writes the guest's old dirty ciphertext over the new page owner's data. | ||||
| CVE-2026-98720 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Force MSR bitmap refresh if runtime eVMCS controls are modified Force a refresh of the vmcs02 MSR bitmap during nested VM-Enter if the runtime eVMCS controls (pin, primary, secondary, etc.) are being updated. If L1 isn't intercepting TPR writes, runs L2 with TPR virtualization, and then runs the same L2 with TPR virtualization disabled, KVM will fail to refresh msr_bitmap02 and leave TPR in passthrough mode even though TPR virtualization is disabled. I.e. failure to refresh the bitmap lets L2 (or L1 by proxy) read and write L0's TPR. | ||||