Export limit exceeded: 424637 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (424637 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53371 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/ionic: bound node_desc sysfs read with %.64s node_desc[64] in struct ib_device is not guaranteed to be NUL- terminated. The core IB sysfs handler uses "%.64s" for exactly this reason (drivers/infiniband/core/sysfs.c:1307), since node_desc_store() performs a raw memcpy of up to IB_DEVICE_NODE_DESC_MAX bytes with no NUL termination: memcpy(desc.node_desc, buf, min_t(int, count, IB_DEVICE_NODE_DESC_MAX)); If exactly 64 bytes are written via the node_desc sysfs file, the array contains no NUL byte. The ionic hca_type_show() handler uses unbounded "%s" and will read past the end of node_desc into adjacent fields of struct ib_device until it encounters a NUL. ionic supports IB_DEVICE_MODIFY_NODE_DESC, so this is triggerable by userspace. Match the core handler and bound the format specifier. | ||||
| CVE-2026-53370 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Improve validation and configuration of ACR masks Currently there are several issues on the user space ACR mask validation and configuration. - The validation for user space ACR mask (attr.config2) is incomplete, e.g., the ACR mask could include the index which belongs to another ACR events group, but it's not validated. - An early return on an invalid ACR mask caused all subsequent ACR groups to be skipped. - The stale hardware ACR mask (hw.config1) is not cleared before setting new hardware ACR mask. The following changes address all of the above issues. - Figure out the event index group of an ACR group. Any bits in the user-space mask not present in the index group are now dropped. - Instead of an early return on invalid bits, drop only the invalid portions and continue iterating through all ACR events to ensure full configuration. - Explicitly clear the stale hardware ACR mask for each event prior to writing the new configuration. Besides, a non-leader event member of ACR group could be disabled in theory. This could cause bit-shifting errors in the acr_mask of remaining group members. But since ACR sampling requires all events to be active, this should not be a big concern in real use case. Add a "FIXME" comment to notice this risk. | ||||
| CVE-2026-53367 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: selinux: fix avdcache auditing The per-task avdcache was incorrectly saving and reusing the audited vector computed by avc_audit_required() rather than recomputing based on the currently requested permissions and distinguishing the denied versus allowed cases. As a result, some permission checks were not being audited, e.g. directory write checks after a previously cached directory search check. [PM: line wrap tweaks] | ||||
| CVE-2026-53689 | 1 Sahlberg | 1 Libnfs | 2026-07-19 | 7.1 High |
| libnfs through 6.0.2 before 55c18ea does not validate a string size, leading to an integer overflow during a connection to a crafted NFS server. This occurs in libnfs_zdr_string in lib/libnfs-zdr.c. | ||||
| CVE-2026-46093 | 1 Linux | 1 Linux Kernel | 2026-07-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: take vmap_purge_lock in shrinker decay_va_pool_node() can be invoked concurrently from two paths: __purge_vmap_area_lazy() when pools are being purged, and the shrinker via vmap_node_shrink_scan(). However, decay_va_pool_node() is not safe to run concurrently, and the shrinker path currently lacks serialization, leading to races and possible leaks. Protect decay_va_pool_node() by taking vmap_purge_lock in the shrinker path to ensure serialization with purge users. | ||||
| CVE-2026-53363 | 1 Linux | 1 Linux Kernel | 2026-07-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags() iptfs_consume_frags() transfers paged fragments from one socket buffer to another but fails to propagate the SKBFL_SHARED_FRAG flag. This is the same class of bug that was fixed in skb_try_coalesce() for CVE-2026-46300: when fragments backed by read-only page-cache pages are merged, the marker indicating their shared nature must be preserved so that ESP can decide correctly whether in-place encryption is safe. Apply the same two-line fix used in skb_try_coalesce() to iptfs_consume_frags(). | ||||
| CVE-2026-53355 | 1 Linux | 1 Linux Kernel | 2026-07-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: rds: clear i_sends on setup unwind The RDS IB connection teardown path is written so it can run during partial startup and on repeated shutdown attempts. It uses NULL pointers to distinguish resources that are still owned from resources that have already been released. When rds_ib_setup_qp() fails after allocating i_sends but before allocating i_recvs, the sends_out path frees i_sends without clearing the pointer. A later shutdown pass can still treat that stale pointer as a live send ring allocation. Clear i_sends after vfree() in the error unwind path so the existing shutdown logic continues to use the correct ownership state. | ||||
| CVE-2026-33434 | 1 Wazuh | 1 Wazuh | 2026-07-18 | 4.3 Medium |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. In versions 4.6.0 and above, prior to 4.14.5, a logic error in CheckRateLimitsMiddleware.dispatch() causes the /events endpoint rate check to unconditionally overwrite the general rate limit result. When the global max_request_per_minute is exceeded, requests to /events still succeed if the events-specific counter (hardcoded 30/min) has not been reached. This allows event injection into analysisd beyond the admin-configured global rate limit. This issue has been fixed in version 4.14.5. | ||||
| CVE-2026-44434 | 1 H2o | 1 Quicly | 2026-07-18 | 5.3 Medium |
| Quicly is an IETF QUIC protocol implementation intended primarily for use within the H2O HTTP server. Prior to commit dccf5d4, Quicly was vulnerable to stateless reset injection through lack of packet entry validation. The QUIC protocol is designed to withstand packet injection attacks, once the handshake is complete. Only packets that carry some secret patterns are considered as stateless resets. Quicly allows the peer to share up to 4 such patterns per connection. However, until now, it failed to determine which of the 4 slots that it uses to retain the secret patterns contains a valid entry. As the slots are zero-initialized, the failure meant that, unless the peer advertised 4 of such patterns, an all-zero pattern was treated as a stateless reset.In effect, this allowed an on-path attacker to reset QUIC connections governed by Quicly. This issue has been fixed by commit dccf5d4. | ||||
| CVE-2026-58643 | 1 Microsoft | 1 Windows Admin Center | 2026-07-18 | 6.1 Medium |
| Improper neutralization of input during web page generation ('cross-site scripting') in Windows Admin Center allows an unauthorized attacker to perform spoofing over a network. | ||||
| CVE-2026-45368 | 1 Getkirby | 1 Kirby | 2026-07-18 | N/A |
| Kirby is an open-source content management system. In versions prior to 4.9.1 and 5.4.1, the underlying URL methods for the KirbyTags and image blocks components did not filter out malicious URL values that resolve to script execution. The vulnerability affects four first-party Kirby renderers that produce `<a href="…">` output from editor-supplied field values: the (`link: …)` KirbyTag, the `link`: parameter of the `(image: …)` KirbyTag when it does not resolve to a known file or `self`, the `link` field of the built-in image block, and the HTML importer for the `blocks` field (which accepted the same malicious input as the image block `link` field). While simple `avascript:` URLs were already deactivated by treating them as a relative path and prepending a single slash to the URL, the use of URLs of the format `javascript://x%0A…` bypasses this protection. The `vbscript:`, `data:`, `livescript:`, `mocha:` and `jar:` schemes are affected by the same underlying gap. This issue has been fixed in versions 4.9.1 and 5.4.1. | ||||
| CVE-2026-44174 | 1 Getkirby | 1 Kirby | 2026-07-18 | N/A |
| Kirby is an open-source content management system. Prior to 4.9.1 and 5.4.1, Kirby did not validate the model attributes that were used in its collection queries, allowing attackers to include arbitrary model methods in their queries. This includes methods with sensitive data such as password() (disclosing the password hash) or root() (disclosing the absolute filesystem path on the server) as well as methods that perform impactful actions such as loginPasswordless() (causing a privilege escalation to another user) or delete() (deleting all queried models in one go if the authenticated user has appropriate permissions). This issue has been fixed in versions 4.9.1 and 5.4.1. | ||||
| CVE-2026-62290 | 2 Cert-manager, Linuxfoundation | 2 Cert-manager, Cert-manager | 2026-07-18 | 7.3 High |
| cert-manager adds certificates and certificate issuers as resource types in Kubernetes clusters, and simplifies the process of obtaining, renewing and using those certificates. From 1.18.0 until 1.19.6 and 1.20.3, Challenge resources under acme.cert-manager.io can be created directly by namespace users without admission validation tying the Challenge to an Order, owner reference, or Issuer-selected solver, allowing attacker-controlled Challenge.spec.solver values referencing a ClusterIssuer to bypass DNS01 solver selectors such as dnsZones, dnsNames, and matchLabels and cause cert-manager to use ClusterIssuer DNS credentials for attacker-selected provider settings and DNS names, including disclosure of X-Api-User and X-Api-Key headers for acme-dns. This issue is fixed in versions 1.19.6 and 1.20.3. | ||||
| CVE-2026-53536 | 1 Activepieces | 1 Activepieces | 2026-07-18 | N/A |
| Activepieces is an open source AI workflow automation platform. Prior to 0.83.0, the /v1/step-files/signed download endpoint verified the supplied JWT against the shared signing secret but did not check the token's audience, and combined with a missing null-check on the decoded fileId, this allowed any caller holding any valid Activepieces JWT (including a freshly created user's own access token) to receive a step-file belonging to another tenant. The file returned was whatever PostgreSQL happened to scan first for type = FLOW_STEP_FILE, varying over time as the database changed, so an authenticated user could obtain step-file attachments belonging to other tenants on the same instance; the attacker could not target a specific victim or file, and the access was read-only with no integrity or availability impact. This issue is fixed in version 0.83.0. | ||||
| CVE-2026-34963 | 2 Barebox, Pengutronix | 2 Barebox, Barebox | 2026-07-18 | 8.4 High |
| barebox version prior to 2026.04.0 contains multiple memory-safety vulnerabilities in the EFI PE loader in efi/loader/pe.c where integer overflow in virtual image size computation using 32-bit arithmetic on section VirtualAddress and size values allows undersized heap allocation, and PE section loading logic fails to validate that PointerToRawData plus copied size remains within the PE file buffer. An attacker can supply a malicious EFI PE binary via TFTP, USB, SD card, or network boot to trigger heap buffer overflow or out-of-bounds read from heap memory, potentially achieving code execution in bootloader context. | ||||
| CVE-2026-34962 | 2 Barebox, Pengutronix | 2 Barebox, Barebox | 2026-07-18 | 6.2 Medium |
| barebox version prior to 2026.04.0 contains a denial-of-service vulnerability in ext4 directory parsing in fs/ext4/ext4_common.c where the ext4fs_iterate_dir() function fails to validate that directory entry length values are non-zero. Attackers can supply a malicious ext4 filesystem image with a crafted directory entry containing a direntlen value of 0 to cause an infinite loop during directory listing or path resolution, resulting in the boot process hanging indefinitely. | ||||
| CVE-2026-34961 | 2 Barebox, Pengutronix | 2 Barebox, Barebox | 2026-07-18 | 6.2 Medium |
| barebox prior to version 2026.04.0 contains out-of-bounds read vulnerabilities in ext4 extent parsing due to missing validation of the eh_entries field against buffer capacity in fs/ext4/ext4_common.c. Attackers can supply a malicious ext4 filesystem image via USB, SD card, or network boot to trigger heap out-of-bounds reads during boot-time filesystem parsing, potentially redirecting reads to arbitrary disk offsets. | ||||
| CVE-2026-34960 | 2 Barebox, Pengutronix | 2 Barebox, Barebox | 2026-07-18 | 6.5 Medium |
| barebox prior to version 2026.04.0 contains an out-of-bounds read vulnerability in DHCP option parsing within the dhcp_message_type() function that fails to verify the options pointer remains within received packet bounds. An attacker on the same broadcast domain can send a crafted DHCP Offer or ACK packet without a proper 0xff end marker to cause the parser to read past valid packet data and potentially crash the system. | ||||
| CVE-2026-46336 | 1 Manyfold3d | 1 Manyfold | 2026-07-18 | 7.1 High |
| Manyfold is an open source, self-hosted web application for managing a collection of 3d models, particularly focused on 3d printing. From 0.96.0 until 0.140.0, authenticated users can rename uploaded files with path traversal sequences because app/models/model_file.rb uses the user-controlled filename in File.join(model.path, filename) without sufficient sanitization, allowing files to be moved or written outside the configured library directory. This issue is fixed in version 0.140.0. | ||||
| CVE-2026-44595 | 2 Spaceapplications, Yamcs | 2 Yamcs, Yamcs | 2026-07-18 | 4.3 Medium |
| Yamcs is a mission control framework. Prior to 5.12.7, the IAM API endpoints listUsers, getUser, listGroups, and getGroup in yamcs-core did not enforce the required SystemPrivilege.ControlAccess check in yamcs-core/src/main/java/org/yamcs/http/api/IamApi.java, so any authenticated user, even one with low or no privileges, could enumerate all user accounts in the system including their usernames, superuser status, and group memberships. This issue is fixed in versions 5.12.7 and 5.13.0. | ||||