| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM DevOps Plan 3.0.0 through 3.0.5 allows web page cache to be stored locally which can be read by another user on the system. |
| The DoLogin Security WordPress plugin before 3.7 uses headers such as the X-Forwarded-For to retrieve the IP address of the request, which could lead to IP spoofing. |
| XWiki is an open-source wiki software platform. From 16.7.0 to 16.10.11, 17.4.4, or 17.7.0, in an instance which is using the XWiki Jetty package (XJetty), a context is exposed to statically access any file located in the webapp/ folder. It allows accessing files which might contains credentials. Fixed in 16.10.11, 17.4.4, and 17.7.0. |
| Vulnerability CVE-2024-22021 allows a Veeam Recovery Orchestrator user with a low privileged role (Plan Author) to retrieve plans from a Scope other than the one they are assigned to.
|
| A code execution vulnerability exists in the Xiaomi App market product. The vulnerability is caused by unsafe configuration and can be exploited by attackers to execute arbitrary code. |
| An issue was addressed with improved handling of temporary files. This issue is fixed in macOS Monterey 12.7.2, macOS Ventura 13.6.3, iOS 17.2 and iPadOS 17.2, iOS 16.7.3 and iPadOS 16.7.3, macOS Sonoma 14.2. An app may be able to modify protected parts of the file system. |
| CyberArk Endpoint Privilege Manager Agent through 25.10.0 allows a local user to achieve privilege escalation through policy elevation of an Administration task. |
| An issue in Statping-ng v.0.91.0 allows an attacker to obtain sensitive information via a crafted request to the admin parameter. |
| NVIDIA Cumulus Linux and NVOS products contain a vulnerability in the NVUE interface, where a low-privileged user could run an unauthorized command. A successful exploit of this vulnerability might lead to escalation of privileges. |
| On Windows 10, when using the 'Save As' functionality, an attacker could have tricked the browser into saving the file with a disallowed extension such as `.url` by including an invalid character in the extension. *Note:* This issue only affected Windows operating systems. Other operating systems are unaffected. This vulnerability affects Firefox < 127, Firefox ESR < 115.12, and Thunderbird < 115.12. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: k3-udma: Reset UDMA_CHAN_RT byte counters to prevent overflow
UDMA_CHAN_RT_*BCNT_REG stores the real-time channel bytecount statistics.
These registers are 32-bit hardware counters and the driver uses these
counters to monitor the operational progress status for a channel, when
transferring more than 4GB of data it was observed that these counters
overflow and completion calculation of a operation gets affected and the
transfer hangs indefinitely.
This commit adds changes to decrease the byte count for every complete
transaction so that these registers never overflow and the proper byte
count statistics is maintained for ongoing transaction by the RT counters.
Earlier uc->bcnt used to maintain a count of the completed bytes at driver
side, since the RT counters maintain the statistics of current transaction
now, the maintenance of uc->bcnt is not necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: output extra debug info if we failed to find an inline backref
[BUG]
Syzbot reported several warning triggered inside
lookup_inline_extent_backref().
[CAUSE]
As usual, the reproducer doesn't reliably trigger locally here, but at
least we know the WARN_ON() is triggered when an inline backref can not
be found, and it can only be triggered when @insert is true. (I.e.
inserting a new inline backref, which means the backref should already
exist)
[ENHANCEMENT]
After the WARN_ON(), dump all the parameters and the extent tree
leaf to help debug. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: wcd938x: fix missing mbhc init error handling
MBHC initialisation can fail so add the missing error handling to avoid
dereferencing an error pointer when later configuring the jack:
Unable to handle kernel paging request at virtual address fffffffffffffff8
pc : wcd_mbhc_start+0x28/0x380 [snd_soc_wcd_mbhc]
lr : wcd938x_codec_set_jack+0x28/0x48 [snd_soc_wcd938x]
Call trace:
wcd_mbhc_start+0x28/0x380 [snd_soc_wcd_mbhc]
wcd938x_codec_set_jack+0x28/0x48 [snd_soc_wcd938x]
snd_soc_component_set_jack+0x28/0x8c [snd_soc_core]
qcom_snd_wcd_jack_setup+0x7c/0x19c [snd_soc_qcom_common]
sc8280xp_snd_init+0x20/0x2c [snd_soc_sc8280xp]
snd_soc_link_init+0x28/0x90 [snd_soc_core]
snd_soc_bind_card+0x628/0xbfc [snd_soc_core]
snd_soc_register_card+0xec/0x104 [snd_soc_core]
devm_snd_soc_register_card+0x4c/0xa4 [snd_soc_core]
sc8280xp_platform_probe+0xf0/0x108 [snd_soc_sc8280xp] |
| In the Linux kernel, the following vulnerability has been resolved:
md: don't dereference mddev after export_rdev()
Except for initial reference, mddev->kobject is referenced by
rdev->kobject, and if the last rdev is freed, there is no guarantee that
mddev is still valid. Hence mddev should not be used anymore after
export_rdev().
This problem can be triggered by following test for mdadm at very
low rate:
New file: mdadm/tests/23rdev-lifetime
devname=${dev0##*/}
devt=`cat /sys/block/$devname/dev`
pid=""
runtime=2
clean_up_test() {
pill -9 $pid
echo clear > /sys/block/md0/md/array_state
}
trap 'clean_up_test' EXIT
add_by_sysfs() {
while true; do
echo $devt > /sys/block/md0/md/new_dev
done
}
remove_by_sysfs(){
while true; do
echo remove > /sys/block/md0/md/dev-${devname}/state
done
}
echo md0 > /sys/module/md_mod/parameters/new_array || die "create md0 failed"
add_by_sysfs &
pid="$pid $!"
remove_by_sysfs &
pid="$pid $!"
sleep $runtime
exit 0
Test cmd:
./test --save-logs --logdir=/tmp/ --keep-going --dev=loop --tests=23rdev-lifetime
Test result:
general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bcb: 0000 [#4] PREEMPT SMP
CPU: 0 PID: 1292 Comm: test Tainted: G D W 6.5.0-rc2-00121-g01e55c376936 #562
RIP: 0010:md_wakeup_thread+0x9e/0x320 [md_mod]
Call Trace:
<TASK>
mddev_unlock+0x1b6/0x310 [md_mod]
rdev_attr_store+0xec/0x190 [md_mod]
sysfs_kf_write+0x52/0x70
kernfs_fop_write_iter+0x19a/0x2a0
vfs_write+0x3b5/0x770
ksys_write+0x74/0x150
__x64_sys_write+0x22/0x30
do_syscall_64+0x40/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fix this problem by don't dereference mddev after export_rdev(). |
| IBM DB2 Merge Backup for Linux, UNIX and Windows 12.1.0.0 could allow an attacker to access sensitive information in memory due to the buffer not properly clearing resources. |
| pgAdmin versions 9.11 are affected by a Restore restriction bypass via key disclosure vulnerability that occurs when running in server mode and performing restores from PLAIN-format dump files. An attacker with access to the pgAdmin web interface can observe an active restore operation, extract the `\restrict` key in real time, and race the restore process by overwriting the restore script with a payload that re-enables meta-commands using `\unrestrict <key>`. This results in reliable command execution on the pgAdmin host during the restore operation. |
| A flaw was found in Moodle. An authorization logic flaw, specifically due to incomplete role checks during the badge awarding process, allowed badges to be granted without proper verification. This could enable unauthorized users to obtain badges they are not entitled to, potentially leading to privilege escalation or unauthorized access to certain features. |
| Remote prevention of access to cellular service with no user interaction (for example, crashing the cellular radio service with a malformed packet) |
| In the Linux kernel, the following vulnerability has been resolved:
gve: defer interrupt enabling until NAPI registration
Currently, interrupts are automatically enabled immediately upon
request. This allows interrupt to fire before the associated NAPI
context is fully initialized and cause failures like below:
[ 0.946369] Call Trace:
[ 0.946369] <IRQ>
[ 0.946369] __napi_poll+0x2a/0x1e0
[ 0.946369] net_rx_action+0x2f9/0x3f0
[ 0.946369] handle_softirqs+0xd6/0x2c0
[ 0.946369] ? handle_edge_irq+0xc1/0x1b0
[ 0.946369] __irq_exit_rcu+0xc3/0xe0
[ 0.946369] common_interrupt+0x81/0xa0
[ 0.946369] </IRQ>
[ 0.946369] <TASK>
[ 0.946369] asm_common_interrupt+0x22/0x40
[ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10
Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto
enablement and explicitly enable the interrupt in NAPI initialization
path (and disable it during NAPI teardown).
This ensures that interrupt lifecycle is strictly coupled with
readiness of NAPI context. |
| Improper access control in SecSettingsIntelligence prior to SMR Mar-2025 Release 1 allows local attackers to launch privileged activities. User interaction is required for triggering this vulnerability. |
