| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: drop the stateid, not the stateowner, on seqid_op replay retry
In nfs4_preprocess_seqid_op() the stateid is obtained from
nfsd4_lookup_stateid(), which holds a reference on the nfs4_stid
(sc_count) but takes no reference on the stateowner. openlockstateid()
merely casts that stid and likewise takes no reference.
When nfsd4_cstate_assign_replay() returns -EAGAIN (the replay owner is
being torn down, RP_UNHASHED) it has not taken a stateowner reference on
that path. The error handling nevertheless called
nfs4_put_stateowner(stp->st_stateowner), dropping an so_count reference
the function never acquired -- risking a stateowner refcount underflow and
use-after-free -- while leaking the sc_count reference held on the stid.
The leaked stid reference can also stall a concurrent
nfsd4_close_open_stateid() waiting for sc_count to drop.
Drop the reference actually held -- the stid -- before retrying. The
stateowner stays alive through the reference held by the stid. This mirrors
the open path in nfsd4_process_open1(), where the put balances a reference
that path explicitly holds on the stateowner. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix possible fh_compose of wrong dentry in nfsd4_create_file()
dentry_create() can hypothetically provide a different dentry than the
one passed in. This could happen, for example, if the exported
filesystem is NFS, and the server returned to OPEN a filehandle which
matched a directory that was already in the dcache. Clearly this would
not be expected!
If this were to happen the dentry (child) that was already stored in
resfhp could be freed and later dereferenced.
We shouldn't call fh_compose() until we are certain that we have the
final dentry, so this patch moved the fh_compose() call to two places:
one for the case where the target already exists, and one after
dentry_create() where it was created. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: hold rcu across localio cmpxchg retry
nfsd_file objects are freed via call_rcu (filecache.c:296), and
nfsd_file_slab is created without SLAB_TYPESAFE_BY_RCU
(KMEM_CACHE(nfsd_file, 0) at filecache.c:789), so the slab page
backing a freed nfsd_file becomes freely reclaimable once the RCU
grace period elapses.
The again: retry block in nfsd_open_local_fh() loads a pointer with
cmpxchg and then calls nfsd_file_get(new) (which is
refcount_inc_not_zero) without holding rcu_read_lock. The sole caller
nfs_open_local_fh() drops rcu_read_lock before invoking this helper,
so no outer reader-side critical section covers the load.
CPU 0 (nfsd_open_local_fh) CPU 1 (nfsd_file_put_local)
----- -----
new = cmpxchg(pnf, NULL, ...)
nf = xchg(pnf, NULL)
nfsd_file_put(nf)
last ref -> call_rcu()
/* grace period elapses;
slab page recycled */
nfsd_file_get(new)
refcount_inc_not_zero(&new->nf_ref)
/* operates on recycled memory */
A non-zero word at the nf_ref offset of the recycled object makes the
refcount bump appear to succeed, and the caller then dereferences
new->nf_net and new->nf_file out of freed memory.
Fix by taking rcu_read_lock() immediately before the cmpxchg and
releasing it on all three exits of the if (new) block: the goto-again
retry, the lost-race cleanup path, and the install-succeeded path.
nfsd_file_put() and nfsd_net_put() stay outside the RCU section so
they remain free to block. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: move nfsd_debugfs_init() after nfsd4_init_slabs() in init_nfsd()
nfsd_debugfs_init() runs before nfsd4_init_slabs() in init_nfsd().
If the slab allocation fails, the bare "return retval" bypasses
nfsd_debugfs_exit(), leaving orphan debugfs files with stale fops
pointers into the freed module text.
Move nfsd_debugfs_init() to after the slab init succeeds, so the
early return has no debugfs state to clean up.
Since debugfs is now the more recently initialized of the two, also
update the unwind paths to match reverse-initialization (LIFO) order:
run nfsd_debugfs_exit() before nfsd4_free_slabs() in both the
init_nfsd() error path and exit_nfsd(). The nfsd debugfs files only
reference module-global state and have no dependency on the slab
caches, so that reordering is a cleanup with no functional change. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent client use-after-free during NFSv4.0 revoked-state cleanup
nfs40_clean_admin_revoked() takes a stateid reference under
clp->cl_lock, drops nn->client_lock, and calls
nfsd4_drop_revoked_stid(), which dereferences the stateid's client
through s->sc_client->cl_lock. The stateid reference does not pin the
client, so a teardown racing the dropped lock can free the client
while nfsd4_drop_revoked_stid() is still using it.
This cleanup runs from the laundromat, so a periodic sweep can race
force_expire_client() driven by a write to the clients/<id>/ctl file.
Skip a client that is already expiring and otherwise pin it with
cl_rpc_users under client_lock before dropping the lock, matching
nfsd4_revoke_states(). |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: clear tcon after cifsFileInfo_put() in cifs_file_set_size()
When the else branch of cifs_file_set_size() finds a writable file handle
via find_writable_file(), it borrows tcon and server from the handle's
tlink, attempts the handle-based set_file_size() RPC, and then releases
the handle with cifsFileInfo_put().
If set_file_size() fails, execution falls through to the path-based
fallback, which reuses the borrowed tcon and server under the
"if (tcon == NULL)" guard. Since tcon is not NULL at that point, the
guard is skipped. If cifsFileInfo_put() dropped the last reference on a
tlink that was already removed from the tlink tree (TCON_LINK_IN_TREE
cleared, as happens during reconnection or session teardown),
cifs_put_tlink() will have freed tcon; the subsequent set_path_size()
call is then a use-after-free.
Setting tcon = NULL after cifsFileInfo_put() causes the existing guard
to take the cifs_sb_tlink() path, which acquires a fresh reference for
the path-based operation or fails cleanly if the session is gone. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2
When a valid primary TRANSACT2 response has been received (mid->resp_buf
set, mid->multiRsp true) and a subsequent secondary response causes
cifs_check_trans2() to return false -- either because the SMB header is
invalid (malformed != 0) or because check2ndT2() rejects the PDU --
handle_mid() overwrites mid->resp_buf with the new buffer (leaking the
primary buffer) and, because mid->multiRsp is set, skips the
server->smallbuf/bigbuf NULL-out. When the user thread frees
mid->resp_buf, server->smallbuf or server->bigbuf is left dangling; the
demux thread reuses it for the next packet, resulting in a use-after-free.
Combine both early-exit conditions and, when mid->multiRsp is already
set, abort the pending transaction inline: set multiEnd, call
dequeue_mid() with malformed=true, and return true so handle_mid() exits
without touching mid->resp_buf or the server buffer pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: only rebind the reopened file's own oplock on durable reconnect
ksmbd_reopen_durable_fd() walks the inode's m_op_list and rebinds every
detached oplock to the reconnecting session:
list_for_each_entry_rcu(op, &ci->m_op_list, op_entry,
lockdep_is_held(&ci->m_lock)) {
if (op->conn)
continue;
op->conn = ksmbd_conn_get(fp->conn);
op->sess = work->sess;
}
The only key is op->conn == NULL, which every detached durable handle on
that inode matches, not just the one owned by fp. When two sessions hold
durable handles on the same file and both disconnect, reconnecting one of
them adopts the other session's oplock: op->sess is overwritten with the
reconnecting session without taking a reference on it, while op->conn
pins the connection.
The sibling teardown path, session_fd_check(), keys on the identity of
the connection being torn down (op->conn == conn) rather than on shared
state, and so does not have this problem.
Once the adopting session is destroyed, ksmbd_session_destroy() frees it
while the foreign oplock still points at it. The reader in
ksmbd_close_fd_app_instance_id() validates only opinfo->conn, which is
still live thanks to the reference taken above, and then dereferences the
stale session:
if (!opinfo->conn) {
up_read(&fp->f_ci->m_lock);
goto out;
}
ft = &opinfo->sess->file_table;
write_lock(&ft->lock);
BUG: KASAN: slab-use-after-free in _raw_write_lock+0x74/0xd0
Write of size 4 at addr ffff88810a970528 by task kworker/0:0/9
Workqueue: ksmbd-io handle_ksmbd_work
Call Trace:
_raw_write_lock+0x74/0xd0
ksmbd_close_fd_app_instance_id+0x183/0x410
smb2_open+0x1346/0x4430
handle_ksmbd_work+0x2bb/0x7b0
Reached from an authenticated session against a share with the default
durable-handle and oplock configuration: two sessions open the same file
with a durable-v2 handle and an RH lease under distinct AppInstanceIds,
both log off, one reconnects with DH2C, and a later durable-v2 create
carrying the other AppInstanceId walks into the freed session.
Constrain the loop to the oplock owned by the file being reopened. |
| In the Linux kernel, the following vulnerability has been resolved:
fanotify: fix use-after-free of file range info
fsnotify_pre_content() builds its file_range on the triggering task's
stack. fanotify_alloc_perm_event() saves a pointer to range.pos in the
heap-allocated permission event so copy_range_info_to_user() can report
the offset later.
The event reader can set the event state to FAN_EVENT_REPORTED and then
sleep while preparing the file descriptor. If a signal interrupts the
triggering task at that point, fanotify_get_response() changes the state
to FAN_EVENT_CANCELED and returns. This unwinds the file_range stack
frame while the reader still owns the event. The reader then dereferences
pevent->ppos and copies the stale stack value to userspace.
KASAN reported:
BUG: KASAN: use-after-free in fanotify_read+0x293e/0x2970
Read of size 8 at addr ffff88811434fc50 by task fanotify_inotif/95
Call Trace:
fanotify_read+0x293e/0x2970
vfs_read+0x177/0xa20
ksys_read+0xf7/0x1c0
do_syscall_64+0xf9/0x540
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Store the range position directly in the permission event and use
FANOTIFY_NO_RANGE when range information is unavailable. The event remains
alive until the reader finishes, so the reported offset no longer depends
on the triggering task's stack. |
| In the Linux kernel, the following vulnerability has been resolved:
media: staging/ipu7: fix async notifier UAF on probe error path
isys_register_devices() registers the V4L2 async notifier via
isys_notifier_init(). If a subsequent probe step such as
isys_fw_log_init() fails, isys_probe() jumps to the out_cleanup label
which only calls isys_unregister_devices(). That helper tears down the
video devices, subdevices, V4L2 device and media device, but never
unregisters or cleans up the async notifier.
As a result the notifier stays chained in the global notifier_list while
the enclosing struct ipu7_isys is freed by devres, leading to list
corruption and a use-after-free the next time the list is walked.
The remove path already does the right thing by calling
isys_notifier_cleanup() before isys_unregister_devices(). Mirror that on
the probe error path so the notifier is unregistered and cleaned up
before the device is torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Fix use-after-free of cmd_rcvr in _ipmi_destroy_user()
Commit 9e91f8a6c868 ("ipmi:msghandler: Remove srcu for the
ipmi_interfaces list") dropped the synchronize_rcu() between unlinking
the command receivers from intf->cmd_rcvrs and freeing them, updating
only the comment that explains why the barrier is needed.
The cmd_rcvrs list is still traversed under plain RCU: find_cmd_rcvr()
walks it inside rcu_read_lock(), and handle_ipmb_get_msg_cmd() borrows
rcvr->user from that lookup within the same read-side section. Without
the grace period, _ipmi_destroy_user() can kfree() a cmd_rcvr while a
reader still holds a pointer to it, causing a use-after-free.
The rework only made srcu unnecessary for the interfaces list; the
cmd_rcvrs list still relies on plain RCU. Restore the synchronize_rcu()
before freeing the receivers. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Remove all sysfs files on registration failure
ipmi_add_smi() creates the nr_users and nr_msgs files before trying to
create the maintenance_mode file. If that last creation fails, the error
path removes only nr_users before dropping the final reference to the
interface.
Remove nr_msgs as well so no sysfs attribute embedded in the freed
interface remains registered. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: hold a reference to the route device in mctp_route_lookup()
mctp_route_lookup() uses rt->dev without holding a reference on it.
mctp_route_lookup_single() returns the route under RCU only, so the
route's device can be torn down concurrently: mctp_dev_put() drops the
last reference and synchronously kfree()s mdev->addrs. mctp_dev_saddr()
then reads rt->dev->addrs[0], giving a use-after-free reachable by an
unprivileged local AF_MCTP user on the receive/forwarding path (no
CAP_NET_RAW required):
BUG: KASAN: slab-use-after-free in mctp_route_lookup
Read of size 1 at addr ... by task mctp_uaf/...
mctp_route_lookup
mctp_pkttype_receive
Freed by task ...:
kfree
mctp_dev_put
mctp_dev_notify
In the same window mctp_dst_from_route() -> mctp_dev_hold() also
increments a refcount that has already reached zero
("refcount_t: addition on 0 ... mctp_dev_hold").
This reintroduces the use-after-free class of CVE-2023-3439: the source
address lookup was moved ahead of the point where the destination takes
its device reference.
Take a reference with refcount_inc_not_zero() before touching rt->dev,
skip a device that is already dead, and drop the reference once the
destination has taken its own. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix use-after-free of the LLC qentry in smc_llc_srv_add_link()
smc_llc_srv_add_link() keeps add_llc pointing into the queue entry:
add_llc = &qentry->msg.add_link; smc_llc.c:1482
...
smc_llc_save_add_link_info(link_new, add_llc); smc_llc.c:1494
smc_llc_flow_qentry_del(&lgr->llc_flow_lcl); smc_llc.c:1495
...
u8 *llc_msg = smc_link_shared_v2_rxbuf(link) ?
(u8 *)lgr->wr_rx_buf_v2 : (u8 *)add_llc; smc_llc.c:1504
smc_llc_save_add_link_rkeys(link, link_new, llc_msg); smc_llc.c:1506
smc_llc_flow_qentry_del() kfree()s the entry, so on a link without a shared
v2 receive buffer the pointer handed to smc_llc_save_add_link_rkeys() is
already freed. Before the Fixes: commit that branch always used
lgr->wr_rx_buf_v2 and add_llc was not used after the free.
Reproduced on an unpatched tree over rxe, with KASAN, kasan_multi_shot
and a link forced to max_recv_sge == 1: the entry is freed and read by
the same call, and the freeing frame is smc_llc_srv_add_link() itself.
[ 2.523161] BUG: KASAN: slab-use-after-free in smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.523499] Read of size 2 at addr ffff8880052194de by task kworker/0:1/11
[ 2.523789]
[ 2.523862] CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0-rc5-p0-g2c9dd296545d #35 PREEMPT(lazy)
[ 2.523865] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 2.523866] Workqueue: smc_hs_wq smc_listen_work
[ 2.523869] Call Trace:
[ 2.523870] <TASK>
[ 2.523871] dump_stack_lvl+0x53/0x70
[ 2.523872] print_report+0xd0/0x630
[ 2.523874] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 2.523876] ? smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.523878] kasan_report+0xce/0x100
[ 2.523879] ? smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.523881] smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.523883] ? smcr_buf_reg_lgr+0x2a4/0x660
[ 2.523885] smc_llc_srv_add_link+0xaa2/0x1e50
[ 2.523888] ? _printk+0xba/0xf0
[ 2.523897] ? __pfx_smc_llc_srv_add_link+0x10/0x10
[ 2.523899] ? down_write+0xb0/0x130
[ 2.523903] ? __pfx_down_write+0x10/0x10
[ 2.523905] smc_listen_work+0x489e/0x4d00
[ 2.523907] ? kmem_cache_free+0x1c6/0x3a0
[ 2.523911] ? __pfx_smc_listen_work+0x10/0x10
[ 2.523913] ? release_sock+0x148/0x1d0
[ 2.523915] ? smc_tcp_listen_work+0xb4f/0xfc0
[ 2.523917] ? _raw_spin_lock_irq+0x80/0xe0
[ 2.523918] ? __pfx__raw_spin_lock_irq+0x10/0x10
[ 2.523920] process_one_work+0x633/0x1030
[ 2.523922] ? assign_work+0x11d/0x370
[ 2.523924] worker_thread+0x45b/0xd10
[ 2.523926] ? __pfx_worker_thread+0x10/0x10
[ 2.523928] ? __pfx_worker_thread+0x10/0x10
[ 2.523929] kthread+0x2c6/0x3b0
[ 2.523931] ? recalc_sigpending+0x15c/0x1e0
[ 2.523934] ? __pfx_kthread+0x10/0x10
[ 2.523935] ret_from_fork+0x36e/0x5a0
[ 2.523937] ? __pfx_ret_from_fork+0x10/0x10
[ 2.523938] ? __switch_to+0x572/0xdd0
[ 2.523943] ? __pfx_kthread+0x10/0x10
[ 2.523944] ret_from_fork_asm+0x1a/0x30
[ 2.523947] </TASK>
[ 2.523948]
[ 2.531253] Allocated by task 48:
[ 2.531399] kasan_save_stack+0x33/0x60
[ 2.531570] kasan_save_track+0x14/0x30
[ 2.531737] __kasan_kmalloc+0x8f/0xa0
[ 2.531905] __kmalloc_cache_noprof+0x158/0x370
[ 2.532100] smc_llc_enqueue+0x72/0x560
[ 2.532268] smc_wr_rx_tasklet_fn+0x474/0xa80
[ 2.532491] tasklet_action_common+0x20f/0x8a0
[ 2.532714] handle_softirqs+0x18e/0x590
[ 2.532886] do_softirq+0x3b/0x60
[ 2.533036] __local_bh_enable_ip+0x61/0x70
[ 2.533221] __alloc_skb+0x732/0x890
[ 2.533384] rxe_init_packet+0x16b/0x4f0
[ 2.533567] prepare_ack_packet+0xb8/0x830
[ 2.533760] rxe_receiver+0x495/0x96e0
[ 2.533933] do_work+0x144/0x470
[ 2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: fix use-after-free and invalid seg operations in kset_replay()
In kset_replay, when key->seg_gen is stale (key->seg_gen <
key->cache_pos.cache_seg->gen), cache_key_put(key) is called but then
key->cache_pos.cache_seg is accessed as the argument to cache_seg_get().
This is a use-after-free on the freed key memory. Although mempool
recycled memory is not immediately reclaimed or overwritten in practice,
this is still a potential UAF bug.
Additionally, for expired invalid keys, setting the cache->seg_map bit
and calling cache_seg_get() is unreasonable since the corresponding
segment data is no longer valid.
Fix both issues by moving cache_seg_get() and __set_bit() after the
gen check, so they only execute for valid keys, and using continue to
skip invalid keys. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: renesas: Check that the transfer is valid before accessing it
The Renesas I3C driver uses an asynchronous model to transfer data. It
prepares a struct renesas_i3c_xfer, enqueues it, and waits for completion.
The interrupt handler dequeues the transfer, updates/uses it, and signals
the waiting thread.
If the completion times out, the waiting thread dequeues the transfer and
free it. If an interrupt fires after that, the handler may access freed
memory, leading to crashes.
Check that the transfer is still valid before accessing it in the
interrupt handler. With it clear any status flags and disable all
the interrupts to avoid triggering the same interrupts again. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: thunderbolt: Disable work before freeing tbt on remove
tbt_altmode_remove() drops the plug and cable references without
draining tbt->work. The work function dereferences those references,
and can also requeue itself in its error path. The VDM callbacks can
queue the same work item.
Disable and drain tbt->work before dropping the references. This waits
for an existing invocation and prevents subsequent schedule_work()
calls from queueing it during teardown.
This issue was found by an in-house static analysis tool and confirmed
by manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent post-shutdown use-after-free in unlock_filesystem
Writing a filesystem path to /proc/fs/nfsd/unlock_filesystem runs
nfsd4_cancel_copy_by_sb() before nfsd_mutex is held and before the
handler confirms that nn->nfsd_serv is set. Once nfsd has shut down,
nfs4_state_destroy_net() has freed nn->conf_id_hashtbl but left the
pointer intact, so the cancel helper iterates freed slab memory as an
array of struct list_head and then dereferences a bogus nfs4_client
when it takes clp->async_lock. A local administrator holding
CAP_SYS_ADMIN can reach this use-after-free by stopping the server and
then writing to unlock_filesystem; KASAN reports a slab-use-after-free
read in nfsd4_cancel_copy_by_sb().
nfsd4_revoke_states() walks the same state tables and for that reason
already runs only under nfsd_mutex with nn->nfsd_serv confirmed
present. Move the async COPY cancel into that protected section so
every NFSv4 state-table walker on this path observes a running server.
Async copies exist only while the server runs, so gating the cancel on
nn->nfsd_serv loses nothing. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't BUG_ON a destroyed DSQ in process_deferred_reenq_users
scx_bpf_dsq_reenq() queues a deferred reenq (dru) that runs from
run_deferred(), not ops.dispatch(). If the DSQ is destroyed before the dru
runs, process_deferred_reenq_users() sees dsq->id == SCX_DSQ_INVALID and
hits the BUG_ON. destroy_dsq() doesn't flush pending drus, so just skip.
tj: Read dsq->id once with READ_ONCE(). Reading it separately in the INVALID
check and the BUG_ON would leave a window where destroy_dsq() can
invalidate the id between the two reads and still trigger the BUG_ON. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: plda: Fix use-after-free of event IRQs during teardown
plda_pcie_irq_domain_deinit() removes pcie->event_domain via
irq_domain_remove(), but the per-event IRQs mapped from that domain
are requested with devm_request_irq() in plda_init_interrupts(). The
actual free_irq() for a devm-managed IRQ is deferred by devres until
after the calling probe()/remove() function returns.
This means irq_domain_remove() can free the domain's internal data
before the deferred free_irq() for IRQs still mapped into it has run.
When devres later processes that deferred cleanup, it can end up
dereferencing the already-freed domain.
Free each event IRQ explicitly with devm_free_irq() before removing
the domain. This triggers the free immediately and removes the IRQ
from the devres tracking list, so devres will not attempt to free it
a second time later.
Also dispose of the event, INTx, and MSI IRQ mappings with
irq_dispose_mapping() before their owning domains are removed.
Finally, guard the calls to irq_set_chained_handler_and_data() for
pcie->irq, pcie->msi_irq, and pcie->intx_irq so they only run when
those fields hold a valid (>0) IRQ number.
This is a pre-existing issue, flagged by automated review during work
on an earlier, unrelated patch to this driver.
Build-tested and boot-tested on StarFive VisionFive v1.2A board |
