| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: revoke copy-notify stateids before dropping their reference
Copy-notify stateids live in the s2s_cp_stateids IDR and on their parent
stid's sc_cp_list, pinned by a single membership reference.
_free_cpntf_state_locked() only unlinks an entry once its refcount reaches
zero, so any revoke path that runs while a concurrent
find_cpntf_state()/manage_cpntf_state() holder has elevated cs_count drops
the reference without unlinking, leaving the entry discoverable with its
membership reference already consumed. A second revoke or a laundromat tick
then frees it while the reader still holds the pointer -- a
KASAN-detectable use-after-free at the reader's nfs4_put_cpntf_state().
This affected all three revoke paths:
- The parent-stid drain (nfs4_free_cpntf_statelist()) repeatedly called
_free_cpntf_state_locked() on the first list entry; a holder that had
bumped cs_count made it return early, so the next iteration
re-decremented and burned the holder's reference.
- OFFLOAD_CANCEL (manage_cpntf_state()) and laundromat expiry likewise
used _free_cpntf_state_locked() and could drop 2->1 without unlinking.
Add revoke_cpntf_state_locked(), which unhashes the entry from the IDR and
sc_cp_list first (deferring the final free to any holder), and use it from
all three revoke paths. The drain now walks with list_for_each_entry_safe()
and revokes each entry unconditionally, so it terminates in one pass per
entry regardless of cs_count. The unhash is gated on
!list_empty(&cps->cp_list); the idr_remove() gate matters because
idr_alloc_cyclic() may have recycled the so_id by then. Keep
_free_cpntf_state_locked() for the reference-holder put path only, where a
concurrent revoke may already have unlinked the entry (its list_del_init()
then a no-op). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: stop device IO before hid_hw_stop
Quiesce device IO at the start of the devm cleanup callback
mcp2221_hid_unregister() so that incoming HID reports cannot race with
hardware teardown during probe failure or device removal, addressing a
potential use-after-free.
Guard the call to hid_device_io_stop() with io_started. On normal
removal hid_device_remove() has already cleared io_started before the
devres group is released, so an unconditional call would otherwise hit
the !io_started path and emit a spurious "io already stopped" warning
on every removal. The guard preserves the probe-failure balancing,
where io_started is still set after hid_device_io_start(), while
staying silent on the normal removal path. |
| In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: charlcd: cancel backlight work on registration failure
With CONFIG_CHARLCD_BL_FLASH, charlcd_init() schedules bl_work before
charlcd_register() calls misc_register(). If registration fails, the
caller frees the charlcd object while delayed work still contains its
address.
Add charlcd_deinit() to cancel the delayed work and turn the backlight
off. Use it for both registration rollback and normal unregistration. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: as3722_get_regulator_dt_data: fix premature of_node_put leaving dangling of_node pointer
In as3722_get_regulator_dt_data(), of_get_child_by_name() acquires a
reference on np, which is then assigned to pdev->dev.of_node. The
function immediately calls of_node_put(np), releasing the reference and
leaving pdev->dev.of_node as a dangling pointer.
Remove the of_node_put(np) call to let the device hold the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: pin next file across nlm_inspect_file lock-drop
nlm_traverse_files() pins the current file with f_count++ across
a mutex_unlock for nlm_inspect_file(), but nothing pins the saved
next pointer. A concurrent nlm_release_file() can kfree the next
file during the unlock window, and the iterator dereferences freed
memory on the next loop step.
Pin both current and next before the lock-drop. Advance by
swapping the pinned cursors at the end of each iteration so next
is always held alive across the unlock.
Always call nlm_file_release() after dropping the iteration pin,
regardless of whether the file matched the predicate. Use
nlm_file_inuse(), which does a live walk of the inode lock list,
rather than the cached f_locks field, so skipped files that never
ran nlm_inspect_file() are evaluated correctly.
Because every file in a hash bucket is now pinned and released,
files skipped by the is_failover_file predicate that have no
locks, blocks, shares, or external references are deleted during
traversal. The old code never evaluated skipped files for
cleanup. The new behavior is intentional: such files are stale
and should not persist in the table. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq24257: fix use-after-free on remove
The STAT-pin interrupt is devm-managed, so it stays armed until the devm
cleanup that runs after remove() returns. remove() cancels
bq->iilimit_setup_work while the threaded handler can still fire; that
handler reschedules the work and dereferences bq, so the work runs
against freed memory once devm frees bq.
Make the delayed work device-managed with devm_delayed_work_autocancel(),
registered before the interrupt request. The devm cleanup then releases
the interrupt first, so the handler can no longer reschedule the work,
and cancels the work before bq is freed. The explicit
cancel_delayed_work_sync() in remove() is no longer needed and is dropped.
Found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq256xx: drain usb_work before freeing the charger
The USB-PHY notifier queues usb_work, whose handler calls
power_supply_changed(bq->charger). The reset devm action only unregisters
the notifier and was registered before the power supplies, so devm frees
bq->charger on unwind before the action runs; a usb_work still queued can
then dereference it.
Register the reset action after the power supplies, so it unregisters
the notifiers and drains usb_work before the supplies are released.
Initialize usb_work and obtain the PHY references before registering
the notifiers, so the worker cannot run before the supplies exist.
Found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: lp8727: fix use-after-free in lp8727_release_irq()
lp8727_isr_func(), the threaded IRQ handler, is the only caller that arms
pchg->work via schedule_delayed_work(). lp8727_release_irq() currently
cancels the work before freeing the IRQ, so an IRQ delivered in between
can re-arm the work through the threaded handler. After .remove returns
the devm layer frees pchg while lp8727_delayed_func() may still run and
dereference it.
Free the IRQ first so the threaded handler is quiesced and can no longer
queue work, then cancel the delayed work to drain the final generation.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: rt9455: quiesce delayed work before teardown
The threaded IRQ handler can queue pwr_rdy_work,
max_charging_time_work and batt_presence_work. pwr_rdy_work and
batt_presence_work can also queue max_charging_time_work, while
batt_presence_work can requeue itself.
rt9455_remove() cancels max_charging_time_work before
batt_presence_work. The latter can therefore queue
max_charging_time_work after it has already been cancelled:
rt9455_remove() workqueue
cancel pwr_rdy_work
cancel max_charging_time_work
batt_presence_work queues
max_charging_time_work
cancel batt_presence_work
return
devres frees rt9455_info
max_charging_time_work dereferences
rt9455_info
The IRQ also remains registered until devres cleanup and can queue more
work after any of the cancellation calls. If rt9455_hw_init() fails
after the IRQ has been requested, probe returns without cancelling work
that may already have been queued. A pending callback can then access
rt9455_info after it has been freed.
Register rt9455_cancel_all_delayed_works() through
devm_add_action_or_reset() right after devm_power_supply_register().
devres invokes the action in reverse registration order, after the
managed IRQ has been freed and before rt9455_info is released, so the
delayed works are drained in both rt9455_remove() and the probe error
path. Cancel pwr_rdy_work and batt_presence_work before
max_charging_time_work because both can queue the latter.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: twl4030_charger: cancel workers via devm
bci is devm-allocated. Two workers (bci->work and bci->current_worker)
dereference it. twl4030_bci_remove() disables charging and masks
interrupts. It cancels neither worker. A worker pending at remove() can
run after devm frees bci.
The USB transceiver comes from devm_usb_get_phy_by_node(). devm
unregisters its notifier only after remove() returns. A cancel_work_sync()
in remove() can then race a notifier reschedule. devm_work_autocancel()
and devm_delayed_work_autocancel() avoid that. They cancel the workers
during devm release, before bci is freed.
The current_worker is registered first, since devm will cancel in
reverse order and bci->work can reschedule current_worker.
[Move comment about order into the commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: stop card-detect handling on probe failure
request_irq() registers the SD card-detect interrupt and the probe enables
it before mmc_add_host() runs. If mmc_add_host() fails, the error path only
unmaps the registers and returns: the interrupt stays registered, so the
handler keeps running against the host once it is freed. via_sdc_isr()
dereferences sdhost and its MMIO base and schedules carddet_work, which
via_sdc_card_detect() also runs against freed memory through its
container_of() dereference.
Add a probe-error path that disables and frees the interrupt and cancels
carddet_work before unmapping. carddet_work can re-enable the device
interrupt via via_reset_pcictrl(), which restores PCIINTCTRL, so mask it
again after cancelling the work.
This issue was found by an in-house static analysis tool and confirmed by
manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
interconnect: Fix use after free in icc_get() and of_icc_get_by_index()
In of_icc_get_by_index() and icc_get(), if the dynamic allocation for
path->name fails via kasprintf(), the error handling path directly
calls kfree(path) to free the path object and returns an error.
However, prior to this point, path_find() calls path_init(), which
already links the path's requests into the req_list of the respective
interconnect nodes via hlist_add_head(). Directly invoking kfree(path)
leaves dangling pointers in the hlist. A subsequent call to icc_get()
or icc_set_bw() will traverse or modify these corrupted lists, triggering
a slab use afterfree.
KASAN report showing the vulnerability when reproducing via debugfs:
BUG: KASAN: slab-use-after-free in path_find+0x6f8/0xcfc
Write of size 8 at addr fff000000d43f748 by task sh/1
...
Call trace:
kasan_report+0xac/0xfc
path_find+0x6f8/0xcfc
icc_get+0x148/0x380
icc_get_set+0xf8/0x2d0
...
Freed by task 1:
kfree+0x1a0/0x4a4
icc_get+0x2cc/0x380
icc_get_set+0xf8/0x2d0
Fix this by replacing kfree(path) with the proper teardown function,
icc_put(path), which safely removes the requests from the req_list using
hlist_del() and drops the provider usage references before freeing the
memory.
Additionally, in icc_get(), ensure that the icc_lock mutex is released
prior to calling icc_put(path) to avoid a deadlock, as icc_put()
internally acquires the same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: unregister the connection before draining the rx tasklet
smc_conn_free() calls smc_ism_unset_conn() only while the link group is
still on its device list, and never sets conn->killed.
smc_lgr_terminate_sched() unlinks the group immediately and defers killing
its connections to a work item, so a connection freed in that window keeps
its smcd->conn[] slot with both gates in smcd_handle_irq() open, and the
device can re-arm the receive tasklet after tasklet_kill() has returned. On
the DMB-nocopy path the ghost send buffer is freed right after that drain,
so the re-armed tasklet dereferences it.
Unregister unconditionally and drain before the detach at both teardown
sites, mirroring rmb_desc, which smc_buf_unuse() releases after the drain.
Clear conn->sndbuf_desc before freeing it as well, so a reader that samples
the pointer cannot get one that is already freed. |
| In the Linux kernel, the following vulnerability has been resolved:
smack: fix cred UAF in smack_file_send_sigiotask()
When inspecting the credentials of another task, objective credentials
(->real_cred, accessed with __task_cred()) must always be used.
Accessing ->cred on a non-current task is forbidden unless that task is
being created or destroyed; a task is allowed to change its own ->cred
pointer with no synchronization, and changing ->cred should only affect the
current syscall.
smack_file_send_sigiotask() was accessing both sets of credentials: First
tsk->cred, then __task_cred(tsk).
Fix it, always access the objective credentials here.
I have tested that this bug can lead to a KASAN-reported UAF of struct cred
in smack_file_send_sigiotask(), and that this fix prevents the race. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/nxp-pit: Fix IRQ leak on cpuhp_setup_state error path
When cpuhp_setup_state fails after pit_clockevent_per_cpu_init has
successfully called request_irq, the error handling jumps directly to
out_pit_clocksource_unregister without freeing the registered IRQ.
This leaks the IRQ line and, since kfree(pit) follows, leaves a
dangling pointer registered as the interrupt handler's dev_id,
potentially leading to a use-after-free if the IRQ fires afterwards.
Fix it by calling pit_clockevent_per_cpu_exit to properly release the
IRQ before falling through to the existing cleanup chain. |
| In the Linux kernel, the following vulnerability has been resolved:
mm, swap: don't free a hibernation slot that is in the swap cache
A slot with a folio in the swap cache is freed when the folio leaves the
cache, not when its count drops. swap_put_entries_cluster() follows that
rule. swap_free_hibernation_slot() does not, it calls
__swap_cluster_free_entries() whether or not a folio sits on the slot.
Cluster readahead can put one there. It walks a raw page_cluster sized
window of offsets around the faulting entry, and a hibernation slot passes
__swap_cache_add_check() because it is not a folio and its count is not
zero. Freeing the slot then clears the entry under that folio.
The folio is now unreachable from the swap table, and the offset goes back
to the allocator. The folio is still on the LRU though, so reclaim can
pick it up later. It then takes the old offset out of folio->swap and
overwrites the table entry there, which by then may belong to someone
else.
This bug can trigger silent memory corruption, process crashes, or data
instability across completely unrelated userspace applications - typically
occurring when uswsusp is preparing the hibernation image.
I found this while working on giving hibernation slots their own marker in
the swap table, which I had discussed with Kairui.
(https://lore.kernel.org/linux-mm/abp7aDgYLrxF3Me8@KASONG-MC4/) As far as
I know there are no reports, so there is no Reported-by/Closes to add.
Check for a cached folio before freeing. The slot is then left in the
ordinary state where only the swap cache holds it, and it is freed when
the folio leaves the cache, either through the reclaim below or through
normal reclaim later. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
Writing to buffer_subbuf_size_kb calls ring_buffer_subbuf_order_set(),
which frees every sub-buffer of the ring buffer, including the reader
page, and replaces them with newly allocated ones.
Readers of trace_pipe hold pointers into those pages. ring_buffer_peek()
looks up an event under cpu_buffer->reader_lock but returns the event
pointer after dropping the lock, and peek_next_entry() then calls
ring_buffer_event_length() and ring_buffer_event_data() on it. If the
sub-buffer order is changed in that window, the reader dereferences
freed memory:
BUG: KASAN: use-after-free in ring_buffer_peek+0x3e0/0x430
Read of size 1 at addr ffff88802a4cf010 by task syz-executor989/6002
Freed by:
free_buffer_page kernel/trace/ring_buffer.c:398 [inline]
ring_buffer_subbuf_order_set+0x1325/0x18e0 kernel/trace/ring_buffer.c:7444
buffer_subbuf_size_write+0x182/0x280 kernel/trace/trace.c:8221
Take trace_access_lock(RING_BUFFER_ALL_CPUS) around the order change.
This is the lock trace_pipe readers already hold across their entire
peek-and-print loop, so the swap can no longer race with a reader that
is dereferencing a peeked event. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: set SC_STATUS_FREED in nfsd4_drop_revoked_stid for delegations
nfsd4_drop_revoked_stid() handles FREE_STATEID for admin-revoked
delegations but does not set SC_STATUS_FREED before releasing cl_lock.
revoke_delegation() uses this flag to detect whether FREE_STATEID has
already processed the delegation -- without it, the freed delegation is
added to cl_revoked via list_add(), producing a use-after-free when
cl_revoked is later traversed in __destroy_client().
The SC_STATUS_REVOKED path in nfsd4_free_stateid() (line 7983) already
sets SC_STATUS_FREED correctly. Apply the same pattern to the
SC_STATUS_ADMIN_REVOKED path in nfsd4_drop_revoked_stid(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: defer vfree of compound ops to fix rpc_status UAF
The rpc_status netlink dumpit walks every in-flight svc_rqst under
rcu_read_lock and, for NFSv4 requests, reads opnums out of
args->ops[]. But args->ops is a separate vmalloc buffer freed
synchronously by vfree() in nfsd4_release_compoundargs() at the end
of every compound. The dumpit's rcu_read_lock pins the svc_rqst
struct itself (freed via kfree_rcu), but nothing defers the vfree
of the ops buffer across the RCU grace period. A concurrent compound
completion can therefore free the buffer while the dumpit is reading
it — a use-after-free on vmalloc memory.
The trailing seqcount recheck (smp_load_acquire of rq_status_counter)
cannot undo a load that already retired against freed memory.
Fix by replacing vfree(args->ops) with kvfree_rcu_mightsleep(), which
defers the free until after an RCU grace period. This makes the
existing rcu_read_lock in the dumpit sufficient to protect the read.
The tradeoff is that completed compound ops buffers (up to
200 * sizeof(struct nfsd4_op)) persist in memory slightly longer,
across one grace period, before being reclaimed. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: don't free session slots that are still in use
nfsd4_sequence() can free the very slot it is currently processing.
When the session shrinker has reduced se_target_maxslots below
se_fchannel.maxreqs, the shrink path checks three conditions before
calling free_session_slots():
1. se_target_maxslots < maxreqs (shrink was advertised)
2. slot->sl_generation == se_slot_gen (slot is up-to-date)
3. seq->maxslots <= se_target_maxslots (client acknowledges)
However, seq->slotid is never checked against se_target_maxslots.
A client using a slot in the range [se_target_maxslots, maxreqs) can
satisfy all three conditions: its slot has the current generation
(set by a prior SEQUENCE), and it sends sa_highest_slotid <=
se_target_maxslots to acknowledge the reduction.
free_session_slots() then kfrees every slot at index >=
se_target_maxslots, including the caller's own slot. The function
continues to write sl_seqid, sl_flags, sl_generation, and stores the
dangling pointer in cstate->slot. Later, nfsd4_store_cache_entry()
copies up to maxresp_cached bytes of the compound reply into the freed
sl_data[] array, corrupting whatever slab object now occupies that
address.
Additionally, a concurrent thread processing SEQUENCE on a different
high-numbered slot can have its slot freed out from under it.
NFSD4_SLOT_INUSE is set under nn->client_lock before the lock is
released, so any concurrent thread past SEQUENCE will have its slot
marked. However, free_session_slots() does not check NFSD4_SLOT_INUSE
before freeing.
Fix both problems by:
1. Checking that the current request's slotid is below the shrink
boundary.
2. Scanning slots in the to-be-freed range for NFSD4_SLOT_INUSE and
deferring the shrink if any are active. |
