| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tls: Use __sk_dst_get() and dst_dev_rcu() in get_netdev_for_sock().
get_netdev_for_sock() is called during setsockopt(),
so not under RCU.
Using sk_dst_get(sk)->dev could trigger UAF.
Let's use __sk_dst_get() and dst_dev_rcu().
Note that the only ->ndo_sk_get_lower_dev() user is
bond_sk_get_lower_dev(), which uses RCU. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: Fix use-after-free bugs in otx2_sync_tstamp()
The original code relies on cancel_delayed_work() in otx2_ptp_destroy(),
which does not ensure that the delayed work item synctstamp_work has fully
completed if it was already running. This leads to use-after-free scenarios
where otx2_ptp is deallocated by otx2_ptp_destroy(), while synctstamp_work
remains active and attempts to dereference otx2_ptp in otx2_sync_tstamp().
Furthermore, the synctstamp_work is cyclic, the likelihood of triggering
the bug is nonnegligible.
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
otx2_remove() |
otx2_ptp_destroy() | otx2_sync_tstamp()
cancel_delayed_work() |
kfree(ptp) |
| ptp = container_of(...); //UAF
| ptp-> //UAF
This is confirmed by a KASAN report:
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff88800aa09a18 by task bash/136
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcf/0x610
? __run_timer_base.part.0+0x7d7/0x8c0
kasan_report+0xb8/0xf0
? __run_timer_base.part.0+0x7d7/0x8c0
__run_timer_base.part.0+0x7d7/0x8c0
? __pfx___run_timer_base.part.0+0x10/0x10
? __pfx_read_tsc+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
run_timer_softirq+0xd1/0x190
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
Allocated by task 1:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
otx2_ptp_init+0xb1/0x860
otx2_probe+0x4eb/0xc30
local_pci_probe+0xdc/0x190
pci_device_probe+0x2fe/0x470
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__driver_attach+0xd2/0x310
bus_for_each_dev+0xed/0x170
bus_add_driver+0x208/0x500
driver_register+0x132/0x460
do_one_initcall+0x89/0x300
kernel_init_freeable+0x40d/0x720
kernel_init+0x1a/0x150
ret_from_fork+0x10c/0x1a0
ret_from_fork_asm+0x1a/0x30
Freed by task 136:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x3f/0x50
kfree+0x137/0x370
otx2_ptp_destroy+0x38/0x80
otx2_remove+0x10d/0x4c0
pci_device_remove+0xa6/0x1d0
device_release_driver_internal+0xf8/0x210
pci_stop_bus_device+0x105/0x150
pci_stop_and_remove_bus_device_locked+0x15/0x30
remove_store+0xcc/0xe0
kernfs_fop_write_iter+0x2c3/0x440
vfs_write+0x871/0xd70
ksys_write+0xee/0x1c0
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled before the otx2_ptp is
deallocated.
This bug was initially identified through static analysis. To reproduce
and test it, I simulated the OcteonTX2 PCI device in QEMU and introduced
artificial delays within the otx2_sync_tstamp() function to increase the
likelihood of triggering the bug. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/buffer: fix use-after-free when call bh_read() helper
There's issue as follows:
BUG: KASAN: stack-out-of-bounds in end_buffer_read_sync+0xe3/0x110
Read of size 8 at addr ffffc9000168f7f8 by task swapper/3/0
CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.16.0-862.14.0.6.x86_64
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x2c/0x390
print_report+0xb4/0x270
kasan_report+0xb8/0xf0
end_buffer_read_sync+0xe3/0x110
end_bio_bh_io_sync+0x56/0x80
blk_update_request+0x30a/0x720
scsi_end_request+0x51/0x2b0
scsi_io_completion+0xe3/0x480
? scsi_device_unbusy+0x11e/0x160
blk_complete_reqs+0x7b/0x90
handle_softirqs+0xef/0x370
irq_exit_rcu+0xa5/0xd0
sysvec_apic_timer_interrupt+0x6e/0x90
</IRQ>
Above issue happens when do ntfs3 filesystem mount, issue may happens
as follows:
mount IRQ
ntfs_fill_super
read_cache_page
do_read_cache_folio
filemap_read_folio
mpage_read_folio
do_mpage_readpage
ntfs_get_block_vbo
bh_read
submit_bh
wait_on_buffer(bh);
blk_complete_reqs
scsi_io_completion
scsi_end_request
blk_update_request
end_bio_bh_io_sync
end_buffer_read_sync
__end_buffer_read_notouch
unlock_buffer
wait_on_buffer(bh);--> return will return to caller
put_bh
--> trigger stack-out-of-bounds
In the mpage_read_folio() function, the stack variable 'map_bh' is
passed to ntfs_get_block_vbo(). Once unlock_buffer() unlocks and
wait_on_buffer() returns to continue processing, the stack variable
is likely to be reclaimed. Consequently, during the end_buffer_read_sync()
process, calling put_bh() may result in stack overrun.
If the bh is not allocated on the stack, it belongs to a folio. Freeing
a buffer head which belongs to a folio is done by drop_buffers() which
will fail to free buffers which are still locked. So it is safe to call
put_bh() before __end_buffer_read_notouch(). |
| In the Linux kernel, the following vulnerability has been resolved:
padata: Fix pd UAF once and for all
There is a race condition/UAF in padata_reorder that goes back
to the initial commit. A reference count is taken at the start
of the process in padata_do_parallel, and released at the end in
padata_serial_worker.
This reference count is (and only is) required for padata_replace
to function correctly. If padata_replace is never called then
there is no issue.
In the function padata_reorder which serves as the core of padata,
as soon as padata is added to queue->serial.list, and the associated
spin lock released, that padata may be processed and the reference
count on pd would go away.
Fix this by getting the next padata before the squeue->serial lock
is released.
In order to make this possible, simplify padata_reorder by only
calling it once the next padata arrives. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free in cifs_oplock_break
A race condition can occur in cifs_oplock_break() leading to a
use-after-free of the cinode structure when unmounting:
cifs_oplock_break()
_cifsFileInfo_put(cfile)
cifsFileInfo_put_final()
cifs_sb_deactive()
[last ref, start releasing sb]
kill_sb()
kill_anon_super()
generic_shutdown_super()
evict_inodes()
dispose_list()
evict()
destroy_inode()
call_rcu(&inode->i_rcu, i_callback)
spin_lock(&cinode->open_file_lock) <- OK
[later] i_callback()
cifs_free_inode()
kmem_cache_free(cinode)
spin_unlock(&cinode->open_file_lock) <- UAF
cifs_done_oplock_break(cinode) <- UAF
The issue occurs when umount has already released its reference to the
superblock. When _cifsFileInfo_put() calls cifs_sb_deactive(), this
releases the last reference, triggering the immediate cleanup of all
inodes under RCU. However, cifs_oplock_break() continues to access the
cinode after this point, resulting in use-after-free.
Fix this by holding an extra reference to the superblock during the
entire oplock break operation. This ensures that the superblock and
its inodes remain valid until the oplock break completes. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gem: Acquire references on GEM handles for framebuffers
A GEM handle can be released while the GEM buffer object is attached
to a DRM framebuffer. This leads to the release of the dma-buf backing
the buffer object, if any. [1] Trying to use the framebuffer in further
mode-setting operations leads to a segmentation fault. Most easily
happens with driver that use shadow planes for vmap-ing the dma-buf
during a page flip. An example is shown below.
[ 156.791968] ------------[ cut here ]------------
[ 156.796830] WARNING: CPU: 2 PID: 2255 at drivers/dma-buf/dma-buf.c:1527 dma_buf_vmap+0x224/0x430
[...]
[ 156.942028] RIP: 0010:dma_buf_vmap+0x224/0x430
[ 157.043420] Call Trace:
[ 157.045898] <TASK>
[ 157.048030] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.052436] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.056836] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.061253] ? drm_gem_shmem_vmap+0x74/0x710
[ 157.065567] ? dma_buf_vmap+0x224/0x430
[ 157.069446] ? __warn.cold+0x58/0xe4
[ 157.073061] ? dma_buf_vmap+0x224/0x430
[ 157.077111] ? report_bug+0x1dd/0x390
[ 157.080842] ? handle_bug+0x5e/0xa0
[ 157.084389] ? exc_invalid_op+0x14/0x50
[ 157.088291] ? asm_exc_invalid_op+0x16/0x20
[ 157.092548] ? dma_buf_vmap+0x224/0x430
[ 157.096663] ? dma_resv_get_singleton+0x6d/0x230
[ 157.101341] ? __pfx_dma_buf_vmap+0x10/0x10
[ 157.105588] ? __pfx_dma_resv_get_singleton+0x10/0x10
[ 157.110697] drm_gem_shmem_vmap+0x74/0x710
[ 157.114866] drm_gem_vmap+0xa9/0x1b0
[ 157.118763] drm_gem_vmap_unlocked+0x46/0xa0
[ 157.123086] drm_gem_fb_vmap+0xab/0x300
[ 157.126979] drm_atomic_helper_prepare_planes.part.0+0x487/0xb10
[ 157.133032] ? lockdep_init_map_type+0x19d/0x880
[ 157.137701] drm_atomic_helper_commit+0x13d/0x2e0
[ 157.142671] ? drm_atomic_nonblocking_commit+0xa0/0x180
[ 157.147988] drm_mode_atomic_ioctl+0x766/0xe40
[...]
[ 157.346424] ---[ end trace 0000000000000000 ]---
Acquiring GEM handles for the framebuffer's GEM buffer objects prevents
this from happening. The framebuffer's cleanup later puts the handle
references.
Commit 1a148af06000 ("drm/gem-shmem: Use dma_buf from GEM object
instance") triggers the segmentation fault easily by using the dma-buf
field more widely. The underlying issue with reference counting has
been present before.
v2:
- acquire the handle instead of the BO (Christian)
- fix comment style (Christian)
- drop the Fixes tag (Christian)
- rename err_ gotos
- add missing Link tag |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Fix UAF when lookup kallsym after ftrace disabled
The following issue happens with a buggy module:
BUG: unable to handle page fault for address: ffffffffc05d0218
PGD 1bd66f067 P4D 1bd66f067 PUD 1bd671067 PMD 101808067 PTE 0
Oops: Oops: 0000 [#1] SMP KASAN PTI
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
RIP: 0010:sized_strscpy+0x81/0x2f0
RSP: 0018:ffff88812d76fa08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffffffc0601010 RCX: dffffc0000000000
RDX: 0000000000000038 RSI: dffffc0000000000 RDI: ffff88812608da2d
RBP: 8080808080808080 R08: ffff88812608da2d R09: ffff88812608da68
R10: ffff88812608d82d R11: ffff88812608d810 R12: 0000000000000038
R13: ffff88812608da2d R14: ffffffffc05d0218 R15: fefefefefefefeff
FS: 00007fef552de740(0000) GS:ffff8884251c7000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc05d0218 CR3: 00000001146f0000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ftrace_mod_get_kallsym+0x1ac/0x590
update_iter_mod+0x239/0x5b0
s_next+0x5b/0xa0
seq_read_iter+0x8c9/0x1070
seq_read+0x249/0x3b0
proc_reg_read+0x1b0/0x280
vfs_read+0x17f/0x920
ksys_read+0xf3/0x1c0
do_syscall_64+0x5f/0x2e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The above issue may happen as follows:
(1) Add kprobe tracepoint;
(2) insmod test.ko;
(3) Module triggers ftrace disabled;
(4) rmmod test.ko;
(5) cat /proc/kallsyms; --> Will trigger UAF as test.ko already removed;
ftrace_mod_get_kallsym()
...
strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN);
...
The problem is when a module triggers an issue with ftrace and
sets ftrace_disable. The ftrace_disable is set when an anomaly is
discovered and to prevent any more damage, ftrace stops all text
modification. The issue that happened was that the ftrace_disable stops
more than just the text modification.
When a module is loaded, its init functions can also be traced. Because
kallsyms deletes the init functions after a module has loaded, ftrace
saves them when the module is loaded and function tracing is enabled. This
allows the output of the function trace to show the init function names
instead of just their raw memory addresses.
When a module is removed, ftrace_release_mod() is called, and if
ftrace_disable is set, it just returns without doing anything more. The
problem here is that it leaves the mod_list still around and if kallsyms
is called, it will call into this code and access the module memory that
has already been freed as it will return:
strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN);
Where the "mod" no longer exists and triggers a UAF bug. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix use-after-free in vhci_flush()
syzbot reported use-after-free in vhci_flush() without repro. [0]
From the splat, a thread close()d a vhci file descriptor while
its device was being used by iotcl() on another thread.
Once the last fd refcnt is released, vhci_release() calls
hci_unregister_dev(), hci_free_dev(), and kfree() for struct
vhci_data, which is set to hci_dev->dev->driver_data.
The problem is that there is no synchronisation after unlinking
hdev from hci_dev_list in hci_unregister_dev(). There might be
another thread still accessing the hdev which was fetched before
the unlink operation.
We can use SRCU for such synchronisation.
Let's run hci_dev_reset() under SRCU and wait for its completion
in hci_unregister_dev().
Another option would be to restore hci_dev->destruct(), which was
removed in commit 587ae086f6e4 ("Bluetooth: Remove unused
hci-destruct cb"). However, this would not be a good solution, as
we should not run hci_unregister_dev() while there are in-flight
ioctl() requests, which could lead to another data-race KCSAN splat.
Note that other drivers seem to have the same problem, for exmaple,
virtbt_remove().
[0]:
BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718
CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
skb_queue_purge include/linux/skbuff.h:3368 [inline]
vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69
hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline]
hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592
sock_do_ioctl+0xd9/0x300 net/socket.c:1190
sock_ioctl+0x576/0x790 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcf5b98e929
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929
RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009
RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528
</TASK>
Allocated by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635
misc_open+0x2bc/0x330 drivers/char/misc.c:161
chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414
do_dentry_open+0xdf0/0x1970 fs/open.c:964
vfs_open+0x3b/0x340 fs/open.c:1094
do_open fs/namei.c:3887 [inline]
path_openat+0x2ee5/0x3830 fs/name
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: remove tag set when second admin queue config fails
Commit 104d0e2f6222 ("nvme-fabrics: reset admin connection for secure
concatenation") modified nvme_tcp_setup_ctrl() to call
nvme_tcp_configure_admin_queue() twice. The first call prepares for
DH-CHAP negotitation, and the second call is required for secure
concatenation. However, this change triggered BUG KASAN slab-use-after-
free in blk_mq_queue_tag_busy_iter(). This BUG can be recreated by
repeating the blktests test case nvme/063 a few times [1].
When the BUG happens, nvme_tcp_create_ctrl() fails in the call chain
below:
nvme_tcp_create_ctrl()
nvme_tcp_alloc_ctrl() new=true ... Alloc nvme_tcp_ctrl and admin_tag_set
nvme_tcp_setup_ctrl() new=true
nvme_tcp_configure_admin_queue() new=true ... Succeed
nvme_alloc_admin_tag_set() ... Alloc the tag set for admin_tag_set
nvme_stop_keep_alive()
nvme_tcp_teardown_admin_queue() remove=false
nvme_tcp_configure_admin_queue() new=false
nvme_tcp_alloc_admin_queue() ... Fail, but do not call nvme_remove_admin_tag_set()
nvme_uninit_ctrl()
nvme_put_ctrl() ... Free up the nvme_tcp_ctrl and admin_tag_set
The first call of nvme_tcp_configure_admin_queue() succeeds with
new=true argument. The second call fails with new=false argument. This
second call does not call nvme_remove_admin_tag_set() on failure, due to
the new=false argument. Then the admin tag set is not removed. However,
nvme_tcp_create_ctrl() assumes that nvme_tcp_setup_ctrl() would call
nvme_remove_admin_tag_set(). Then it frees up struct nvme_tcp_ctrl which
has admin_tag_set field. Later on, the timeout handler accesses the
admin_tag_set field and causes the BUG KASAN slab-use-after-free.
To not leave the admin tag set, call nvme_remove_admin_tag_set() when
the second nvme_tcp_configure_admin_queue() call fails. Do not return
from nvme_tcp_setup_ctrl() on failure. Instead, jump to "destroy_admin"
go-to label to call nvme_tcp_teardown_admin_queue() which calls
nvme_remove_admin_tag_set(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete
This reworks MGMT_OP_REMOVE_ADV_MONITOR to not use mgmt_pending_add to
avoid crashes like bellow:
==================================================================
BUG: KASAN: slab-use-after-free in mgmt_remove_adv_monitor_complete+0xe5/0x540 net/bluetooth/mgmt.c:5406
Read of size 8 at addr ffff88801c53f318 by task kworker/u5:5/5341
CPU: 0 UID: 0 PID: 5341 Comm: kworker/u5:5 Not tainted 6.15.0-syzkaller-10402-g4cb6c8af8591 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
mgmt_remove_adv_monitor_complete+0xe5/0x540 net/bluetooth/mgmt.c:5406
hci_cmd_sync_work+0x261/0x3a0 net/bluetooth/hci_sync.c:334
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x711/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 5987:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4358
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
mgmt_pending_new+0x65/0x240 net/bluetooth/mgmt_util.c:252
mgmt_pending_add+0x34/0x120 net/bluetooth/mgmt_util.c:279
remove_adv_monitor+0x103/0x1b0 net/bluetooth/mgmt.c:5454
hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719
hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:727
sock_write_iter+0x258/0x330 net/socket.c:1131
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x548/0xa90 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 5989:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2380 [inline]
slab_free mm/slub.c:4642 [inline]
kfree+0x18e/0x440 mm/slub.c:4841
mgmt_pending_foreach+0xc9/0x120 net/bluetooth/mgmt_util.c:242
mgmt_index_removed+0x10d/0x2f0 net/bluetooth/mgmt.c:9366
hci_sock_bind+0xbe9/0x1000 net/bluetooth/hci_sock.c:1314
__sys_bind_socket net/socket.c:1810 [inline]
__sys_bind+0x2c3/0x3e0 net/socket.c:1841
__do_sys_bind net/socket.c:1846 [inline]
__se_sys_bind net/socket.c:1844 [inline]
__x64_sys_bind+0x7a/0x90 net/socket.c:1844
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Protect mgmt_pending list with its own lock
This uses a mutex to protect from concurrent access of mgmt_pending
list which can cause crashes like:
==================================================================
BUG: KASAN: slab-use-after-free in hci_sock_get_channel+0x60/0x68 net/bluetooth/hci_sock.c:91
Read of size 2 at addr ffff0000c48885b2 by task syz.4.334/7318
CPU: 0 UID: 0 PID: 7318 Comm: syz.4.334 Not tainted 6.15.0-rc7-syzkaller-g187899f4124a #0 PREEMPT
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call trace:
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:466 (C)
__dump_stack+0x30/0x40 lib/dump_stack.c:94
dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120
print_address_description+0xa8/0x254 mm/kasan/report.c:408
print_report+0x68/0x84 mm/kasan/report.c:521
kasan_report+0xb0/0x110 mm/kasan/report.c:634
__asan_report_load2_noabort+0x20/0x2c mm/kasan/report_generic.c:379
hci_sock_get_channel+0x60/0x68 net/bluetooth/hci_sock.c:91
mgmt_pending_find+0x7c/0x140 net/bluetooth/mgmt_util.c:223
pending_find net/bluetooth/mgmt.c:947 [inline]
remove_adv_monitor+0x44/0x1a4 net/bluetooth/mgmt.c:5445
hci_mgmt_cmd+0x780/0xc00 net/bluetooth/hci_sock.c:1712
hci_sock_sendmsg+0x544/0xbb0 net/bluetooth/hci_sock.c:1832
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
sock_write_iter+0x25c/0x378 net/socket.c:1131
new_sync_write fs/read_write.c:591 [inline]
vfs_write+0x62c/0x97c fs/read_write.c:684
ksys_write+0x120/0x210 fs/read_write.c:736
__do_sys_write fs/read_write.c:747 [inline]
__se_sys_write fs/read_write.c:744 [inline]
__arm64_sys_write+0x7c/0x90 fs/read_write.c:744
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
Allocated by task 7037:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x40/0x78 mm/kasan/common.c:68
kasan_save_alloc_info+0x44/0x54 mm/kasan/generic.c:562
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x9c/0xb4 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4327 [inline]
__kmalloc_noprof+0x2fc/0x4c8 mm/slub.c:4339
kmalloc_noprof include/linux/slab.h:909 [inline]
sk_prot_alloc+0xc4/0x1f0 net/core/sock.c:2198
sk_alloc+0x44/0x3ac net/core/sock.c:2254
bt_sock_alloc+0x4c/0x300 net/bluetooth/af_bluetooth.c:148
hci_sock_create+0xa8/0x194 net/bluetooth/hci_sock.c:2202
bt_sock_create+0x14c/0x24c net/bluetooth/af_bluetooth.c:132
__sock_create+0x43c/0x91c net/socket.c:1541
sock_create net/socket.c:1599 [inline]
__sys_socket_create net/socket.c:1636 [inline]
__sys_socket+0xd4/0x1c0 net/socket.c:1683
__do_sys_socket net/socket.c:1697 [inline]
__se_sys_socket net/socket.c:1695 [inline]
__arm64_sys_socket+0x7c/0x94 net/socket.c:1695
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
Freed by task 6607:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x40/0x78 mm/kasan/common.c:68
kasan_save_free_info+0x58/0x70 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x68/0x88 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in kerberos authentication
Setting sess->user = NULL was introduced to fix the dangling pointer
created by ksmbd_free_user. However, it is possible another thread could
be operating on the session and make use of sess->user after it has been
passed to ksmbd_free_user but before sess->user is set to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Reset IRTE to host control if *new* route isn't postable
Restore an IRTE back to host control (remapped or posted MSI mode) if the
*new* GSI route prevents posting the IRQ directly to a vCPU, regardless of
the GSI routing type. Updating the IRTE if and only if the new GSI is an
MSI results in KVM leaving an IRTE posting to a vCPU.
The dangling IRTE can result in interrupts being incorrectly delivered to
the guest, and in the worst case scenario can result in use-after-free,
e.g. if the VM is torn down, but the underlying host IRQ isn't freed. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Synchronous access b/w reset and tm thread for reply queue
When the task management thread processes reply queues while the reset
thread resets them, the task management thread accesses an invalid queue ID
(0xFFFF), set by the reset thread, which points to unallocated memory,
causing a crash.
Add flag 'io_admin_reset_sync' to synchronize access between the reset,
I/O, and admin threads. Before a reset, the reset handler sets this flag to
block I/O and admin processing threads. If any thread bypasses the initial
check, the reset thread waits up to 10 seconds for processing to finish. If
the wait exceeds 10 seconds, the controller is marked as unrecoverable. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: detect and prevent references to a freed transport in sendmsg
sctp_sendmsg() re-uses associations and transports when possible by
doing a lookup based on the socket endpoint and the message destination
address, and then sctp_sendmsg_to_asoc() sets the selected transport in
all the message chunks to be sent.
There's a possible race condition if another thread triggers the removal
of that selected transport, for instance, by explicitly unbinding an
address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have
been set up and before the message is sent. This can happen if the send
buffer is full, during the period when the sender thread temporarily
releases the socket lock in sctp_wait_for_sndbuf().
This causes the access to the transport data in
sctp_outq_select_transport(), when the association outqueue is flushed,
to result in a use-after-free read.
This change avoids this scenario by having sctp_transport_free() signal
the freeing of the transport, tagging it as "dead". In order to do this,
the patch restores the "dead" bit in struct sctp_transport, which was
removed in
commit 47faa1e4c50e ("sctp: remove the dead field of sctp_transport").
Then, in the scenario where the sender thread has released the socket
lock in sctp_wait_for_sndbuf(), the bit is checked again after
re-acquiring the socket lock to detect the deletion. This is done while
holding a reference to the transport to prevent it from being freed in
the process.
If the transport was deleted while the socket lock was relinquished,
sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the
send.
The bug was found by a private syzbot instance (see the error report [1]
and the C reproducer that triggers it [2]). |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "smb: client: fix TCP timers deadlock after rmmod"
This reverts commit e9f2517a3e18a54a3943c098d2226b245d488801.
Commit e9f2517a3e18 ("smb: client: fix TCP timers deadlock after
rmmod") is intended to fix a null-ptr-deref in LOCKDEP, which is
mentioned as CVE-2024-54680, but is actually did not fix anything;
The issue can be reproduced on top of it. [0]
Also, it reverted the change by commit ef7134c7fc48 ("smb: client:
Fix use-after-free of network namespace.") and introduced a real
issue by reviving the kernel TCP socket.
When a reconnect happens for a CIFS connection, the socket state
transitions to FIN_WAIT_1. Then, inet_csk_clear_xmit_timers_sync()
in tcp_close() stops all timers for the socket.
If an incoming FIN packet is lost, the socket will stay at FIN_WAIT_1
forever, and such sockets could be leaked up to net.ipv4.tcp_max_orphans.
Usually, FIN can be retransmitted by the peer, but if the peer aborts
the connection, the issue comes into reality.
I warned about this privately by pointing out the exact report [1],
but the bogus fix was finally merged.
So, we should not stop the timers to finally kill the connection on
our side in that case, meaning we must not use a kernel socket for
TCP whose sk->sk_net_refcnt is 0.
The kernel socket does not have a reference to its netns to make it
possible to tear down netns without cleaning up every resource in it.
For example, tunnel devices use a UDP socket internally, but we can
destroy netns without removing such devices and let it complete
during exit. Otherwise, netns would be leaked when the last application
died.
However, this is problematic for TCP sockets because TCP has timers to
close the connection gracefully even after the socket is close()d. The
lifetime of the socket and its netns is different from the lifetime of
the underlying connection.
If the socket user does not maintain the netns lifetime, the timer could
be fired after the socket is close()d and its netns is freed up, resulting
in use-after-free.
Actually, we have seen so many similar issues and converted such sockets
to have a reference to netns.
That's why I converted the CIFS client socket to have a reference to
netns (sk->sk_net_refcnt == 1), which is somehow mentioned as out-of-scope
of CIFS and technically wrong in e9f2517a3e18, but **is in-scope and right
fix**.
Regarding the LOCKDEP issue, we can prevent the module unload by
bumping the module refcount when switching the LOCKDDEP key in
sock_lock_init_class_and_name(). [2]
For a while, let's revert the bogus fix.
Note that now we can use sk_net_refcnt_upgrade() for the socket
conversion, but I'll do so later separately to make backport easy. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix bad hist from corrupting named_triggers list
The following commands causes a crash:
~# cd /sys/kernel/tracing/events/rcu/rcu_callback
~# echo 'hist:name=bad:keys=common_pid:onmax(bogus).save(common_pid)' > trigger
bash: echo: write error: Invalid argument
~# echo 'hist:name=bad:keys=common_pid' > trigger
Because the following occurs:
event_trigger_write() {
trigger_process_regex() {
event_hist_trigger_parse() {
data = event_trigger_alloc(..);
event_trigger_register(.., data) {
cmd_ops->reg(.., data, ..) [hist_register_trigger()] {
data->ops->init() [event_hist_trigger_init()] {
save_named_trigger(name, data) {
list_add(&data->named_list, &named_triggers);
}
}
}
}
ret = create_actions(); (return -EINVAL)
if (ret)
goto out_unreg;
[..]
ret = hist_trigger_enable(data, ...) {
list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!)
[..]
out_unreg:
event_hist_unregister(.., data) {
cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] {
list_for_each_entry(iter, &file->triggers, list) {
if (!hist_trigger_match(data, iter, named_data, false)) <- never matches
continue;
[..]
test = iter;
}
if (test && test->ops->free) <<<-- test is NULL
test->ops->free(test) [event_hist_trigger_free()] {
[..]
if (data->name)
del_named_trigger(data) {
list_del(&data->named_list); <<<<-- NEVER gets removed!
}
}
}
}
[..]
kfree(data); <<<-- frees item but it is still on list
The next time a hist with name is registered, it causes an u-a-f bug and
the kernel can crash.
Move the code around such that if event_trigger_register() succeeds, the
next thing called is hist_trigger_enable() which adds it to the list.
A bunch of actions is called if get_named_trigger_data() returns false.
But that doesn't need to be called after event_trigger_register(), so it
can be moved up, allowing event_trigger_register() to be called just
before hist_trigger_enable() keeping them together and allowing the
file->triggers to be properly populated. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/kbuf: reallocate buf lists on upgrade
IORING_REGISTER_PBUF_RING can reuse an old struct io_buffer_list if it
was created for legacy selected buffer and has been emptied. It violates
the requirement that most of the field should stay stable after publish.
Always reallocate it instead. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: separate no-async decryption request handling from async
If we're not doing async, the handling is much simpler. There's no
reference counting, we just need to wait for the completion to wake us
up and return its result.
We should preferably also use a separate crypto_wait. I'm not seeing a
UAF as I did in the past, I think aec7961916f3 ("tls: fix race between
async notify and socket close") took care of it.
This will make the next fix easier. |
| In the Linux kernel, the following vulnerability has been resolved:
block: RCU protect disk->conv_zones_bitmap
Ensure that a disk revalidation changing the conventional zones bitmap
of a disk does not cause invalid memory references when using the
disk_zone_is_conv() helper by RCU protecting the disk->conv_zones_bitmap
pointer.
disk_zone_is_conv() is modified to operate under the RCU read lock and
the function disk_set_conv_zones_bitmap() is added to update a disk
conv_zones_bitmap pointer using rcu_replace_pointer() with the disk
zone_wplugs_lock spinlock held.
disk_free_zone_resources() is modified to call
disk_update_zone_resources() with a NULL bitmap pointer to free the disk
conv_zones_bitmap. disk_set_conv_zones_bitmap() is also used in
disk_update_zone_resources() to set the new (revalidated) bitmap and
free the old one. |
