| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: check return value of nvmet_tcp_set_queue_sock
The return value of nvmet_tcp_set_queue_sock() is currently ignored in
nvmet_tcp_tls_handshake_done(). If it fails (e.g., due to the socket
not being in TCP_ESTABLISHED state), the socket callbacks will not be
properly set, leading to queue and socket leakage.
Fix this by capturing the return value and calling
nvmet_tcp_schedule_release_queue() on failure to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix deadlock in read error recovery path
raid1d and raid10d may resubmit a split md cloned bio while handling
a read error. In this case, resubmitting the bio can lead to a deadlock
if the array is suspended before md_handle_request() acquires an
active_io reference via percpu_ref_tryget_live().
Since the cloned bio already holds an active_io reference,
trying to acquire another reference via percpu_ref_tryget_live()
can lead to a deadlock while the array is suspended.
Fix this by using percpu_ref_get() for md cloned bios. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix error-path detection with md_cloned_bio()
Detect the error path using md_cloned_bio() instead of relying
on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be
NULL or -1 after splitting and resubmitting a failed bio.
As a result, the error path may not be recognized and memory
allocations can incorrectly use GFP_NOIO instead of
(GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under
memory pressure. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix bio accounting for split md cloned bios
Use md_cloned_bio() to control bio accounting instead of relying
on r1bio_existed in raid1 or the io_accounting flag in raid10.
The previous logic does not reliably reflect whether a bio is an
md cloned bio. When a failed bio is split and resubmitted via
bio_submit_split_bioset() on the error path, this can lead to either
double accounting for md cloned bios, or missing accounting for bios
returned from bio_submit_split_bioset()
Fix this by using md_cloned_bio() to detect md cloned bios and
skip accounting accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix memory leak in ath12k_wifi7_dp_rx_h_verify_tkip_mic()
In ath12k_wifi7_dp_rx_h_verify_tkip_mic(), the call to
ath12k_dp_rx_check_nwifi_hdr_len_valid() may return false when the
NWIFI header length is invalid, causing the function to abort early with
-EINVAL.
When this happens, the error propagates to
ath12k_wifi7_dp_rx_h_defrag(), which clears first_frag by setting it
to NULL. As a result, the corresponding MSDU is no longer referenced
by the defragmentation path and is never freed.
This leads to a memory leak for the affected MSDU on this error path.
Proper cleanup is required to ensure the MSDU is released when header
validation fails during TKIP MIC verification.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: fix vhost_get_avail_idx for a non empty ring
vhost_get_avail_idx is supposed to report whether it has updated
vq->avail_idx. Instead, it returns whether all entries have been
consumed, which is usually the same. But not always - in
drivers/vhost/net.c and when mergeable buffers have been enabled, the
driver checks whether the combined entries are big enough to store an
incoming packet. If not, the driver re-enables notifications with
available entries still in the ring. The incorrect return value from
vhost_get_avail_idx propagates through vhost_enable_notify and causes
the host to livelock if the guest is not making progress, as vhost will
immediately disable notifications and retry using the available entries.
This goes back to commit d3bb267bbdcb ("vhost: cache avail index in
vhost_enable_notify()") which changed vhost_enable_notify() to compare
the freshly read avail index against vq->last_avail_idx instead of the
previously cached vq->avail_idx. Commit 7ad472397667 ("vhost: move
smp_rmb() into vhost_get_avail_idx()") then carried over the same
comparison when refactoring vhost_enable_notify() to call the unified
vhost_get_avail_idx().
The obvious fix is to make vhost_get_avail_idx do what the comment
says it does and report whether new entries have been added. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate fast symlink target during inode read
ocfs2_validate_inode_block() already rejects several inconsistent
self-contained dinodes before they are exposed to the rest of the
filesystem. Fast symlinks need the same treatment.
A zero-cluster symlink is treated as a fast symlink and later read through
page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses
strnlen() on the inline payload and then copies len + 1 bytes into the
folio. If a corrupt dinode stores an i_size that does not fit the inline
area or omits the terminating NUL at i_size, that copy reads past the end
of the inode block buffer.
Reject zero-cluster symlink dinodes whose i_size exceeds the inline
fast-symlink capacity or whose inline payload is not NUL-terminated
exactly at i_size when the inode block is validated. This keeps malformed
fast symlinks from reaching the read path.
Validation reproduced this kernel report:
KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0
RIP: 0033:0x7f5c6d859aa7
Read of size 3905
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xce/0x630 (?:?)
ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x19f/0x330 (?:?)
kasan_report+0xe0/0x110 (?:?)
kasan_check_range+0x105/0x1b0 (?:?)
__asan_memcpy+0x23/0x60 (?:?)
filemap_read_folio+0x27/0xe0 (?:?)
filemap_read_folio+0x35/0xe0 (?:?)
do_read_cache_folio+0x138/0x230 (?:?)
__page_get_link+0x26/0x110 (?:?)
page_get_link+0x2e/0x70 (?:?)
vfs_readlink+0x15e/0x250 (?:?)
touch_atime+0x4d/0x370 (?:?)
do_readlinkat+0x186/0x200 (?:?)
do_user_addr_fault+0x65a/0x890 (?:?)
__x64_sys_readlink+0x46/0x60 (?:?)
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| Replaying GSS-TSIG signed UDP messages can result in memory corruption in "`named`". An attacker who can capture a previously signed UDP message can replay it while the negotiated TSIG key is still valid. By also sending crafted queries to a zone the attacker controls, the attacker may potentially achieve remote code execution.
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount
Add a refcount for struct nf_ct_timeout which is used by ct extension to
set the custom ct timeout policy, this tells us that the ct timeout is
being used by a conntrack entry. When the last conntrack entry drops the
refcount on the ct timeout, the ct timeout is released.
Remove the refcount for control plane which controls if the ruleset
refers to the timeout policy. After this update, it is possible to
remove the ct timeout policy from nfnetlink_cttimeout immediately.
This is for simplicity not to handle two refcounts on a single object.
Remove nf_queue_nf_hook_drop(): a packet sitting in nfqueue will just
hold a reference to the nf_ct_timeout object until packet is reinjected,
since this is part of the ct extension, this will be released by the
time the conntrack is freed.
nf_ct_untimeout() is still called to clean up in a best effort basis:
the ct timeout on existing entries gets removed when the ct timeout goes
away, but as long as the iptables ruleset still refers to the ct timeout
through a template, new conntracks may keep attaching it and extend its
lifetime until the rule is removed.
nf_ct_untimeout() is not called anymore from module removal path, this
is unlikely to find timeouts give module refcount is bumped, and the new
refcount already tracks the ct timeout policy use so it is released when
unused. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix endpoint/socket association handling
Disassociating a socket from an endpoint via siw_socket_disassoc() may
release the last reference on that endpoint and free it. Therefore, don't
clear the endpoints socket pointer after calling that function, but
within.
This fixes a:
BUG: KASAN: slab-use-after-free in siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1053 drivers/infiniband/sw/siw/siw_cm.c:1075)
which occurred after processing a malformed MPA request during connection
establishment, causing the new endpoint to be closed. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Clear rb node linkage when freeing bpf_rb_root
bpf_rb_root_free() detaches the root by copying the current rb_root_cached
and then replacing the live root with RB_ROOT_CACHED. It then walks the
copied root and drops each object contained in the tree.
This leaves the rb node state intact while dropping the object. If the
object is refcounted and survives the drop, its bpf_rb_node_kern still
contains an owner pointer to the freed root and stale rb tree linkage. If
a later bpf_rb_root allocation reuses the same address, bpf_rbtree_remove()
can incorrectly pass the owner check and call rb_erase_cached() on a node
whose rb pointers belong to the old tree.
Mirror the list draining behavior by marking nodes as busy while the root
is being detached, then clear the rb node and release the owner before
dropping the containing object. This makes surviving nodes unowned and
safe to reject from remove or accept for a later add. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject sleepable BPF_LSM_CGROUP programs at load time
The cgroup shim runs under rcu_read_lock_dont_migrate(), so we should
not attach any sleepable BPF programs there. Add support to the verifier
to explicitly reject attempts to load sleepable BPF programs destined
for LSM cgroup attachment.
Without this, we get the following splat from a BPF_LSM_CGROUP
program marked BPF_F_SLEEPABLE attached to file_open when it calls
bpf_get_dentry_xattr():
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1567
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 34317, name: load
preempt_count: 0, expected: 0
RCU nest depth: 2, expected: 0
Call Trace:
down_read+0x76/0x480
ext4_xattr_get+0x11f/0x700
__vfs_getxattr+0xf0/0x150
bpf_get_dentry_xattr+0xbb/0xf0
bpf_prog_e76a298dac9218c6_test_open+0x6a/0x85
__cgroup_bpf_run_lsm_current+0x326/0x840
bpf_trampoline_6442534646+0x62/0x14d
security_file_open+0x34/0x60
do_dentry_open+0x340/0x1260
vfs_open+0x7a/0x440
path_openat+0x1bac/0x30a0
libbpf provides a .s named section variant for every sleepable
program type except lsm_cgroup, reflecting that per-cgroup LSM programs
are intended to only run in a non-sleepable context.
The above splat was obtained by bypassing libbpf by using bpf(2)
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix deadlock cloning inline extent when using flushoncommit
In commit b48c980b6a7e ("btrfs: fix deadlock between reflink and
transaction commit when using flushoncommit") a deadlock was fixed
between reflinks and transaction commits when the fs is mounted with the
flushoncommit option. This happened when we had to copy an inline extent's
data to the destination file. However the issue was fixed only for the
case where the destination offset is 0, it missed the case when the offset
is greater than zero.
Fix this by ensuring we get i_size update whenever we copied an inline
extent's data into the destination file.
Syzbot reported this with the following trace:
INFO: task kworker/u8:3:57 blocked for more than 143 seconds.
Not tainted syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u8:3 state:D stack:21600 pid:57 tgid:57 ppid:2 task_flags:0x4208160 flags:0x00080000
Workqueue: writeback wb_workfn (flush-btrfs-129)
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5402 [inline]
__schedule+0x16f9/0x5500 kernel/sched/core.c:7204
__schedule_loop kernel/sched/core.c:7283 [inline]
schedule+0x164/0x360 kernel/sched/core.c:7298
wait_extent_bit fs/btrfs/extent-io-tree.c:905 [inline]
btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:2008
btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline]
btrfs_invalidate_folio+0x440/0xc00 fs/btrfs/inode.c:7718
extent_writepage fs/btrfs/extent_io.c:1848 [inline]
extent_write_cache_pages fs/btrfs/extent_io.c:2552 [inline]
btrfs_writepages+0x12f3/0x2410 fs/btrfs/extent_io.c:2684
do_writepages+0x32e/0x550 mm/page-writeback.c:2571
__writeback_single_inode+0x133/0x10e0 fs/fs-writeback.c:1764
writeback_sb_inodes+0x97f/0x1980 fs/fs-writeback.c:2056
wb_writeback+0x445/0xb00 fs/fs-writeback.c:2241
wb_do_writeback fs/fs-writeback.c:2388 [inline]
wb_workfn+0x3fd/0xf20 fs/fs-writeback.c:2428
process_one_work+0x98b/0x1630 kernel/workqueue.c:3318
process_scheduled_works kernel/workqueue.c:3401 [inline]
worker_thread+0xb49/0x1140 kernel/workqueue.c:3482
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
INFO: task syz.0.145:8523 blocked for more than 143 seconds.
Not tainted syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz.0.145 state:D stack:22752 pid:8523 tgid:8522 ppid:5850 task_flags:0x400140 flags:0x00080002
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5402 [inline]
__schedule+0x16f9/0x5500 kernel/sched/core.c:7204
__schedule_loop kernel/sched/core.c:7283 [inline]
schedule+0x164/0x360 kernel/sched/core.c:7298
wb_wait_for_completion+0x3e8/0x790 fs/fs-writeback.c:227
__writeback_inodes_sb_nr+0x24c/0x2d0 fs/fs-writeback.c:2847
try_to_writeback_inodes_sb+0x9a/0xc0 fs/fs-writeback.c:2895
btrfs_start_delalloc_flush fs/btrfs/transaction.c:2182 [inline]
btrfs_commit_transaction+0x813/0x2fc0 fs/btrfs/transaction.c:2371
btrfs_sync_file+0xdf4/0x1230 fs/btrfs/file.c:1822
generic_write_sync include/linux/fs.h:2663 [inline]
btrfs_do_write_iter+0x6a9/0x840 fs/btrfs/file.c:1473
new_sync_write fs/read_write.c:595 [inline]
vfs_write+0x629/0xba0 fs/read_write.c:688
ksys_write+0x156/0x270 fs/read_write.c:740
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5a0bdece59
RSP: 002b:00007f5a0b446028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007f5a0c065fa0 RCX: 00007f5a0bdece59
RDX: 000000000000029f RSI: 0000200000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbe: do not configure xps for XDP queues
netif_set_xps_queue() should not be called for an XDP Tx queue, since such
queues are not netdev-exposed. On systems with number of CPUs >=64, on E610
adapter, netdev is configured with maximum number queue pairs being 63
(due to MSI-X assignment), but configuring XDP results in 64 XDP queues.
So, during XDP program load, when netif_set_xps_queue() is called for the
last XDP queue, we get a WARNING with a call trace and KASAN report
afterwards (if enabled).
[ 2012.699800] WARNING: net/core/dev.c:2854 at __netif_set_xps_queue+0x116a/0x1e40, CPU#36: xdpsock/103668
[...]
[ 2012.700029] RIP: 0010:__netif_set_xps_queue+0x116a/0x1e40
[ 2012.700035] Code: b6 34 06 48 89 f8 83 e0 07 83 c0 01 40 38 f0 7c 09 40 84 f6 0f 85 03 0a 00 00 0f b7 44 24 40 66 43 89 44 6a 18 e9 01 fb ff ff <0f> 0b e9 f2 ee ff ff 44 8b 44 24 44 45 85 c0 74 50 4d 85 e4 0f 84
[ 2012.700040] RSP: 0018:ffff8882369aeb28 EFLAGS: 00010246
[ 2012.700046] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000
[ 2012.700050] RDX: 1ffff1111da3d891 RSI: ffff888120e34250 RDI: ffff8888ed1ec488
[ 2012.700054] RBP: ffff888913281560 R08: 0000000000000000 R09: ffff8888ed1ec000
[ 2012.700058] R10: ffff8888a2e83180 R11: 0000000000000000 R12: 0000000000007fa8
[ 2012.700061] R13: 000000000000003f R14: ffff888120e34854 R15: ffff8889132817c8
[ 2012.700065] FS: 00007fc8ea9ff740(0000) GS:ffff88884cefe000(0000) knlGS:0000000000000000
[ 2012.700069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2012.700073] CR2: 00007f81c8000020 CR3: 00000002299f8006 CR4: 00000000007726f0
[ 2012.700077] PKRU: 55555554
[ 2012.700080] Call Trace:
[ 2012.700084] <TASK>
[ 2012.700087] ? ktime_get+0x61/0x150
[ 2012.700097] ? usleep_range_state+0x133/0x1b0
[ 2012.700108] ? __pfx_usleep_range_state+0x10/0x10
[ 2012.700114] netif_set_xps_queue+0x31/0x50
[ 2012.700119] ixgbe_configure_tx_ring+0x472/0x920 [ixgbe]
[...]
[ 2012.700486] ixgbe_xdp+0x38f/0x750 [ixgbe]
[...]
[ 2012.701094] BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue+0x1ac5/0x1e40
[ 2012.701100] Write of size 4 at addr ffff88888d43cff8 by task xdpsock/103668
Skip XPS configuration for XDP Tx queues. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate donor file superblock early in EXT4_IOC_MOVE_EXT
Reject the EXT4_IOC_MOVE_EXT ioctl early if the donor file does not
belong to the same superblock as the original file. Currently, this
validation is performed inside ext4_move_extents() by
mext_check_validity(), but only after lock_two_nondirectories() has
already acquired the inode locks. When the donor fd refers to a file
on a different filesystem (e.g., overlayfs), this late validation
creates a circular lock dependency:
CPU0 (overlayfs write) CPU1 (ext4 ioctl)
---- ----
inode_lock(ovl_inode)
mnt_want_write_file(filp)
sb_start_write(ext4_sb) [sb_writers]
backing_file_write_iter()
vfs_iter_write(real_file)
file_start_write(real_file)
sb_start_write(ext4_sb) [blocked by freeze]
lock_two_nondirectories()
inode_lock(ovl_inode) [blocked]
With a concurrent freeze operation holding sb_writers write side, this
forms a deadlock cycle: CPU0 waits for freeze to complete, freeze waits
for CPU1's sb_writers reader to exit, CPU1 waits for CPU0's inode lock.
Since EXT4_IOC_MOVE_EXT exchanges physical extents between two files,
it fundamentally requires both files to reside on the same ext4
filesystem. Moving the superblock check before any lock acquisition
is both semantically correct and eliminates the circular dependency
by ensuring that cross-filesystem donor fds are rejected before
sb_writers or inode locks are taken. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix UAF in hci_unregister_dev()
hci_unregister_dev() does not disable cmd_timer and ncmd_timer
before the hci_dev structure is freed. If a timeout fires
during device teardown, the callback dereferences freed memory
(including the hdev->reset function pointer), leading to a
use-after-free.
Add disable_delayed_work_sync() calls alongside the existing
disable_work_sync() calls to ensure both timers are fully
quiesced before teardown proceeds. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Fix kernel heap address leak in bounce_error_event()
The comment above bounce_error_event() documents that user clients
should receive SNDRV_SEQ_EVENT_BOUNCE with the original event embedded
as variable-length data, while kernel clients should receive
SNDRV_SEQ_EVENT_KERNEL_ERROR with a quoted kernel pointer.
However, the implementation unconditionally uses
SNDRV_SEQ_EVENT_KERNEL_ERROR with data.quote.event set to the raw
struct snd_seq_event pointer for all clients. When a bounce error
event is delivered to a USER_CLIENT via snd_seq_read(), the kernel
heap address in data.quote.event is exposed to userspace through
copy_to_user() in the fixed-length branch.
This is a distinct leak path from the one addressed by commit
705dd6dcbc0e ("ALSA: seq: Clear variable event pointer on read"),
which sanitizes data.ext.ptr in the variable-length branch of
snd_seq_read(). The bounce_error_event() leak uses fixed-length
events that take the else branch where no sanitization occurs.
Differentiate the bounce event by client type. For USER_CLIENT,
send SNDRV_SEQ_EVENT_BOUNCE with SNDRV_SEQ_EVENT_LENGTH_VARIABLE
and data.ext pointing to the original event. The variable-length
path in snd_seq_event_dup() copies the event data into chained
cells, and snd_seq_expand_var_event() copies only the content --
never the pointer -- to userspace. For KERNEL_CLIENT, keep the
existing SNDRV_SEQ_EVENT_KERNEL_ERROR behavior with the quoted
pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Block region delete during region creation
Expand the range lock, rename it "regions_lock", to disable region deletion
in the critical period between construct_region() and attach_target(), as
well as the period between device_add() and registering the remove actions.
Otherwise, userspace can confuse the kernel. It can violate the assumption
the region stays registered through the completion of cxl_add_to_region().
It can violate the assumption that devm_add_action_or_reset() is working
with a live 'struct cxl_region'.
It is ok for the region to disappear outside of those windows as that
mirrors device hotplug flows where the proper locks are held. |
| A weakness has been identified in dhikshitha29 Insurance-Management-System 91de5edda5baa109ad8e9baf03ce6a3ceda84183/125362cc21dca20d74091a4913a5096bb58dd837. Affected by this issue is some unknown functionality of the file /Admin/includes/Admin-Register-inc.php of the component Add New Admin Form. Executing a manipulation of the argument submit/Admin_id/password can lead to improper authorization. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Resolve region deletion races
Sungwoo noticed that the sysfs trigger to delete a region may try to delete
a region multiple times. It also has no exclusion relative to the kernel
releasing the region via CXL root device teardown.
Instead of installing new cxl root devres actions per region, use the
existing root decoder unregistration event to remove all remaining regions.
An xarray of regions replaces a devres list of regions.
This handles 3 separate issues with the old approach:
1/ sysfs users racing to delete the same region: no longer possible now
that the regions_lock is held over the lookup and deletion.
2/ multiple actions triggering deletion of the same region: solved by
erasing regions while holding @regions_lock, and only proceeding on
successful erasure.
3/ userspace racing devres_release_all() to trigger the devres not found
warning: solved by sysfs unregistration not requiring a release action |
