| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Notepad++ is a free and open-source source code editor. Prior to 8.9.8, the NPPM_SAVESESSION handler in PowerEditor/src/NppBigSwitch.cpp converts lParam to a sessionInfo pointer and dereferences its nbFile, files, and sessionFilePathName members without checking for null. A process running at the same or a higher Windows integrity level on the same desktop can send NPPM_SAVESESSION with a null lParam, immediately terminating Notepad++ and causing denial of service and loss of unsaved documents. This issue is fixed in version 8.9.8. |
| Null pointer dereference in Windows Kerberos allows an unauthorized attacker to deny service over a network. |
| A vulnerability was found in Open5GS up to 2.8.0. This affects the function ogs_pfcp_parse_volume_measurement in the library lib/pfcp/types.c of the component PFCP Handler. The manipulation results in null pointer dereference. The attack may be launched remotely. The patch is identified as 8f07b507b78ff94776f2cd49276eb116ed93d7f2. A patch should be applied to remediate this issue. |
| Null pointer dereference in Windows Routing and Remote Access Service (RRAS) allows an authorized attacker to deny service over a network. |
| A flaw was found in libxml2. A local user or an attacker providing a specially crafted XML catalog can trigger a NULL pointer dereference during XML catalog parsing. This occurs when a `nextCatalog` element lacks its mandatory `catalog` attribute, leading to the application crashing and causing a Denial of Service (DoS). |
| Null pointer dereference in Windows SMB Server Network Transport Driver (srvnet.sys) allows an unauthorized attacker to deny service over a network. |
| A security flaw has been discovered in GNU Binutils 2.47. This vulnerability affects the function elf_orphan_compatible of the file ld/ldelf.c of the component ELF Orphan Section Handler. Performing a manipulation results in null pointer dereference. The attack must be initiated from a local position. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through a bug report but has not responded yet. |
| A NULL pointer dereference flaw was found in GStreamer's RTSP support library. The vulnerability occurs while parsing an Authorization or WWW-Authenticate header that uses Digest authentication. Specially crafted whitespace placement around a parameter's terminator can cause an internal length calculation to underflow, leading to a crash of the process parsing the header. On an RTSP server this can be triggered by a remote, unauthenticated attacker sending a single malformed request when the server has authentication enabled; the same flaw can also be triggered against an RTSP client by a malicious or compromised RTSP server. Successful exploitation results in a denial of service (application crash) and has no confirmed impact on confidentiality or integrity. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Publish an LVCMDQ only after it is fully initialized
tegra241_vintf_init_lvcmdq() stores the freshly allocated vcmdq pointer to
the vintf->lvcmdqs[] array, before tegra241_vcmdq_alloc_smmu_cmdq() builds
the vcmdq->cmdq. The error ISR dereferences that cmdq, so a latched LVCMDQ
error (e.g. one inherited across a kexec) firing in this window would make
tegra241_vintf0_handle_error() pass the still-zeroed arm_smmu_cmdq down to
__arm_smmu_cmdq_skip_err(), dereferencing NULL queue register pointers.
Drop the store from tegra241_vintf_init_lvcmdq() and publish the vcmdq at
the end of the allocation instead, with an smp_store_release() that pairs
with an smp_load_acquire() in the ISR, which can see a fully built LVCMDQ
or NULL.
The user-owned LVCMDQ allocation moves accordingly, publishing the vcmdq
once tegra241_vcmdq_hw_init_user() succeeds, using a plain store since a
user VINTF's lvcmdqs[] has no lockless reader -- the error ISR only walks
the VINTF0 array. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Guard admin state-revocation walks with NFSD_NET_UP
Writing to /proc/fs/nfsd/unlock_filesystem, or sending the
NFSD_CMD_UNLOCK_FILESYSTEM or NFSD_CMD_UNLOCK_EXPORT netlink command,
walks the NFSv4 client hash tables to revoke open state and cancel
async COPY operations. All three handlers gate that walk on
nn->nfsd_serv, but a listener added via portlist or netlink
listener_set sets nn->nfsd_serv before any nfsd thread starts.
nfsd_startup_net() has not yet allocated nn->conf_id_hashtbl, so the
walkers dereference a NULL table. A local administrator with
CAP_SYS_ADMIN can crash the kernel this way without ever starting the
server.
nn->nfsd_serv is set when the service is created, which precedes
table allocation. NFSD_NET_UP instead brackets the window where the
tables are live: set at the end of nfsd_startup_net() and cleared in
nfsd_shutdown_net() after they are freed, both under nfsd_mutex.
Gating the three unlock paths on NFSD_NET_UP fixes the startup-time
NULL dereference while preserving the earlier post-shutdown
use-after-free fix. |
| In the Linux kernel, the following vulnerability has been resolved:
rpcrdma: arm rn_done before publishing the notification
rpcrdma_rn_register() inserts @rn into rd_xa with xa_alloc() before
storing the caller's callback in rn->rn_done. The xarray makes @rn
reachable to rpcrdma_remove_one(), which walks rd_xa and invokes
rn->rn_done(rn) for every registered notification. A device removal
that races a fresh registration can therefore observe @rn with
rn_done still NULL, because the notification objects are zero
allocated by their owners, and call through a NULL function pointer.
Store rn->rn_done before xa_alloc() publishes @rn. The xarray's
store-side and load-side ordering then guarantees that any CPU which
finds @rn in rd_xa also observes the armed callback.
rpcrdma_rn_unregister() treats a non-NULL rn_done as the sentinel
for a completed registration, so the early store must not survive a
failed registration. Clear rn_done again when xa_alloc() fails.
Were it left set, the failed-accept cleanup path would call
rpcrdma_rn_unregister() on an @rn that was never inserted, erasing
an unrelated rd_xa slot and underflowing rd_kref. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: set default primary compressor in zram_destroy_comps()
Patch series "zram: fix zram issues reported by sashiko".
Sashiko drove by and reported [1] a couple of zram issues:
a possible BUG_ON() in zlib code due to missing winbits range
validation and one possible NULL-ptr dereference in zcomp.
Both are low risk yet still worth fixing.
This patch (of 2):
zram_destroy_comps() resets all compressors and leaves them set to NULL,
including the primary one, which is invalid device state, as now
comp_algorithm_show()->strcmp() can be called on a NULL compressor. Set
default primary compressor in zram_destroy_comps(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: rpl: fix NULL dereference of idev in ipv6_rpl_srh_rcv()
ipv6_rpl_srh_rcv() dereferences idev from __in6_dev_get() without a NULL
check when reading idev->cnf.rpl_seg_enabled.
When the device's MTU drops below IPV6_MIN_MTU, addrconf_ifdown() clears
dev->ip6_ptr through RCU_INIT_POINTER(). A packet that passed the idev
check in ip6_rcv_core() can then reach ipv6_rpl_srh_rcv() with
dev->ip6_ptr already NULL.
Reproduced by flooding the receiving interface with ping6 traffic while
flapping its MTU between 1500 and 1200:
BUG: KASAN: null-ptr-deref in ipv6_rpl_srh_rcv+0xb3/0x1070
Read of size 4 at addr 00000000000006b4 by task ping6/394
CPU: 2 UID: 0 PID: 394 Comm: ping6 Not tainted 7.2.0-rc7-micro-vm-dev-00095-g24ef02f934ee #240 PREEMPT(full)
Call Trace:
<IRQ>
kasan_report+0xc6/0x100
ipv6_rpl_srh_rcv+0xb3/0x1070
ip6_protocol_deliver_rcu+0x759/0x9a0
ip6_input_finish+0xa8/0x1b0
ip6_input+0xe1/0x490
ipv6_rcv+0x33d/0x460
__netif_receive_skb_one_core+0xd6/0x130
process_backlog+0x2cc/0xa00
__napi_poll.constprop.0+0x56/0x270
net_rx_action+0x327/0x730
handle_softirqs+0x11e/0x630
do_softirq+0xb3/0xf0
</IRQ>
Both ipv6_rpl_srh_rcv() and ipv6_srh_rcv() are called only from
ipv6_rthdr_rcv(), which already has an idev lookup.
Fix the NULL dereference on the RPL path by checking idev in
ipv6_rthdr_rcv(), before it calls either function. The callees take idev as
an argument and no longer call __in6_dev_get(), so the packet is now
dropped in one place, with SKB_DROP_REASON_IPV6DISABLED on both paths. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject redirect helpers without a bpf_net_context
The bpf_redirect*() helpers and skb_do_redirect() obtain the per-task
bpf_redirect_info via bpf_net_ctx_get_ri(), which dereferences the
current->bpf_net_context unconditionally. That context is established
on the paths that run tc BPF such as sch_handle_{ingress,egress}(),
*except* for the case where {cls,act}_bpf was attached to a proper
qdisc. A program running from there reaches the NULL deref in two ways:
* It calls bpf_redirect() directly, which dereferences the context at
the top of the helper:
tc qdisc add dev eth0 root handle 1: red limit 1MB min 10KB max 20KB \
avpkt 1000 burst 100 qevent early_drop block 10
tc filter add block 10 pref 1 bpf obj redirect.o
* It simply returns TC_ACT_REDIRECT without helper call: tcf_qevent_handle()
then dispatches to skb_do_redirect(), which dereferences the context
Rather than extending bpf_net_context management into the qdisc path,
make the redirect helpers refuse to operate when no context exists, and
have tcf_qevent_handle() drop a TC_ACT_REDIRECT verdict instead of
calling skb_do_redirect(). Previous behaviour was a crash, so nothing
regresses by not supporting it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: hvs/v3d: Fix null dereference in unbind
The hvs and v3d drivers use dev_get_drvdata(master) in their unbind
functions. Since the vc4-drm gets removed before its dependent drivers
(vc4_hvs/vc4_v3d) the vc4_hvs_unbind/vc4_v3d_unbind functions try to
get drvdata of its master and fails with a null dereference error.
Use the data pointer passed to the unbind functions directly instead of
dev_get_drvdata(master). This avoids using potentially freed memory. |
| An issue in Free5GC v.4.2.2 allows a remote attacker to cause a denial of service via the UPF component |
| A NULL pointer dereference vulnerability exists in the Prism parser component of mruby 4.0.0. An attacker can provide a specially crafted Ruby source file that triggers the parser to pass a NULL pointer to nonnull string handling functions, resulting in undefined behavior and application crash. |
| A null pointer dereference was addressed with improved input validation. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, visionOS 27, watchOS 27. Processing web content may lead to a denial-of-service. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: control: Don't add invalid kcontrols to LED layer
The kcontrol LED state layer tries to track the all associated
kcontrol elements with naive assumptions that they are readable.
But one can create a write-only element that has no get callback (even
a user element can do it), and this may lead to a NULL dereference at
the call chain of snd_ctl_led_notify(), as found by syzkaller.
For avoiding the Oops, add a sanity check of the kcontrol's info and
get callbacks, and just skip the invalid kcontrols before assigning
the kctl to the LED layer. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix NULL deref of af_xdp_zc_qidx on rep setup
af_xdp_zc_qidx tracks receive queues using AF_XDP zero-copy and is
allocated during PF/VF probe. Representors and other non-AF_XDP paths
leave the pointer NULL, but several call sites used test_bit() on it
unconditionally.
Switching to devlink eswitch mode creates representors and runs
otx2_init_hw_resources(), which reaches otx2_pool_aq_init() and oopses
when dereferencing the NULL bitmap. Add NULL checks before every
af_xdp_zc_qidx test_bit() use in the RSS, ethtool, XSK, and pool init
paths. |
