| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix use-after-free of slot->bus on hot remove
Dennis reports a boot crash on recent Lenovo laptops with a USB4 dock.
Since commit 0fc70886569c ("thunderbolt: Reset USB4 v2 host router") and
commit 59a54c5f3dbd ("thunderbolt: Reset topology created by the boot
firmware"), USB4 v2 and v1 Host Routers are reset on probe of the
thunderbolt driver.
The reset clears the Presence Detect State and Data Link Layer Link Active
bits at the USB4 Host Router's Root Port and thus causes hot removal of the
dock.
The crash occurs when pciehp is unbound from one of the dock's Downstream
Ports: pciehp creates a pci_slot on bind and destroys it on unbind. The
pci_slot contains a pointer to the pci_bus below the Downstream Port, but
a reference on that pci_bus is never acquired. The pci_bus is destroyed
before the pci_slot, so a use-after-free ensues when pci_slot_release()
accesses slot->bus.
In principle this should not happen because pci_stop_bus_device() unbinds
pciehp (and therefore destroys the pci_slot) before the pci_bus is
destroyed by pci_remove_bus_device().
However the stacktrace provided by Dennis shows that pciehp is unbound from
pci_remove_bus_device() instead of pci_stop_bus_device(). To understand
the significance of this, one needs to know that the PCI core uses a two
step process to remove a portion of the hierarchy: It first unbinds all
drivers in the sub-hierarchy in pci_stop_bus_device() and then actually
removes the devices in pci_remove_bus_device(). There is no precaution to
prevent driver binding in-between pci_stop_bus_device() and
pci_remove_bus_device().
In Dennis' case, it seems removal of the hierarchy by pciehp races with
driver binding by pci_bus_add_devices(). pciehp is bound to the
Downstream Port after pci_stop_bus_device() has run, so it is unbound by
pci_remove_bus_device() instead of pci_stop_bus_device(). Because the
pci_bus has already been destroyed at that point, accesses to it result in
a use-after-free.
One might conclude that driver binding needs to be prevented after
pci_stop_bus_device() has run. However it seems risky that pci_slot points
to pci_bus without holding a reference. Solely relying on correct ordering
of driver unbind versus pci_bus destruction is certainly not defensive
programming.
If pci_slot has a need to access data in pci_bus, it ought to acquire a
reference. Amend pci_create_slot() accordingly. Dennis reports that the
crash is not reproducible with this change.
Abridged stacktrace:
pcieport 0000:00:07.0: PME: Signaling with IRQ 156
pcieport 0000:00:07.0: pciehp: Slot #12 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
pci_bus 0000:20: dev 00, created physical slot 12
pcieport 0000:00:07.0: pciehp: Slot(12): Card not present
...
pcieport 0000:21:02.0: pciehp: pcie_disable_notification: SLOTCTRL d8 write cmd 0
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI
CPU: 13 UID: 0 PID: 134 Comm: irq/156-pciehp Not tainted 6.11.0-devel+ #1
RIP: 0010:dev_driver_string+0x12/0x40
pci_destroy_slot
pciehp_remove
pcie_port_remove_service
device_release_driver_internal
bus_remove_device
device_del
device_unregister
remove_iter
device_for_each_child
pcie_portdrv_remove
pci_device_remove
device_release_driver_internal
bus_remove_device
device_del
pci_remove_bus_device (recursive invocation)
pci_remove_bus_device
pciehp_unconfigure_device
pciehp_disable_slot
pciehp_handle_presence_or_link_change
pciehp_ist |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.0: Fix a use-after-free problem in the asynchronous open()
Yang Erkun reports that when two threads are opening files at the same
time, and are forced to abort before a reply is seen, then the call to
nfs_release_seqid() in nfs4_opendata_free() can result in a
use-after-free of the pointer to the defunct rpc task of the other
thread.
The fix is to ensure that if the RPC call is aborted before the call to
nfs_wait_on_sequence() is complete, then we must call nfs_release_seqid()
in nfs4_open_release() before the rpc_task is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
ubifs: authentication: Fix use-after-free in ubifs_tnc_end_commit
After an insertion in TNC, the tree might split and cause a node to
change its `znode->parent`. A further deletion of other nodes in the
tree (which also could free the nodes), the aforementioned node's
`znode->cparent` could still point to a freed node. This
`znode->cparent` may not be updated when getting nodes to commit in
`ubifs_tnc_start_commit()`. This could then trigger a use-after-free
when accessing the `znode->cparent` in `write_index()` in
`ubifs_tnc_end_commit()`.
This can be triggered by running
rm -f /etc/test-file.bin
dd if=/dev/urandom of=/etc/test-file.bin bs=1M count=60 conv=fsync
in a loop, and with `CONFIG_UBIFS_FS_AUTHENTICATION`. KASAN then
reports:
BUG: KASAN: use-after-free in ubifs_tnc_end_commit+0xa5c/0x1950
Write of size 32 at addr ffffff800a3af86c by task ubifs_bgt0_20/153
Call trace:
dump_backtrace+0x0/0x340
show_stack+0x18/0x24
dump_stack_lvl+0x9c/0xbc
print_address_description.constprop.0+0x74/0x2b0
kasan_report+0x1d8/0x1f0
kasan_check_range+0xf8/0x1a0
memcpy+0x84/0xf4
ubifs_tnc_end_commit+0xa5c/0x1950
do_commit+0x4e0/0x1340
ubifs_bg_thread+0x234/0x2e0
kthread+0x36c/0x410
ret_from_fork+0x10/0x20
Allocated by task 401:
kasan_save_stack+0x38/0x70
__kasan_kmalloc+0x8c/0xd0
__kmalloc+0x34c/0x5bc
tnc_insert+0x140/0x16a4
ubifs_tnc_add+0x370/0x52c
ubifs_jnl_write_data+0x5d8/0x870
do_writepage+0x36c/0x510
ubifs_writepage+0x190/0x4dc
__writepage+0x58/0x154
write_cache_pages+0x394/0x830
do_writepages+0x1f0/0x5b0
filemap_fdatawrite_wbc+0x170/0x25c
file_write_and_wait_range+0x140/0x190
ubifs_fsync+0xe8/0x290
vfs_fsync_range+0xc0/0x1e4
do_fsync+0x40/0x90
__arm64_sys_fsync+0x34/0x50
invoke_syscall.constprop.0+0xa8/0x260
do_el0_svc+0xc8/0x1f0
el0_svc+0x34/0x70
el0t_64_sync_handler+0x108/0x114
el0t_64_sync+0x1a4/0x1a8
Freed by task 403:
kasan_save_stack+0x38/0x70
kasan_set_track+0x28/0x40
kasan_set_free_info+0x28/0x4c
__kasan_slab_free+0xd4/0x13c
kfree+0xc4/0x3a0
tnc_delete+0x3f4/0xe40
ubifs_tnc_remove_range+0x368/0x73c
ubifs_tnc_remove_ino+0x29c/0x2e0
ubifs_jnl_delete_inode+0x150/0x260
ubifs_evict_inode+0x1d4/0x2e4
evict+0x1c8/0x450
iput+0x2a0/0x3c4
do_unlinkat+0x2cc/0x490
__arm64_sys_unlinkat+0x90/0x100
invoke_syscall.constprop.0+0xa8/0x260
do_el0_svc+0xc8/0x1f0
el0_svc+0x34/0x70
el0t_64_sync_handler+0x108/0x114
el0t_64_sync+0x1a4/0x1a8
The offending `memcpy()` in `ubifs_copy_hash()` has a use-after-free
when a node becomes root in TNC but still has a `cparent` to an already
freed node. More specifically, consider the following TNC:
zroot
/
/
zp1
/
/
zn
Inserting a new node `zn_new` with a key smaller then `zn` will trigger
a split in `tnc_insert()` if `zp1` is full:
zroot
/ \
/ \
zp1 zp2
/ \
/ \
zn_new zn
`zn->parent` has now been moved to `zp2`, *but* `zn->cparent` still
points to `zp1`.
Now, consider a removal of all the nodes _except_ `zn`. Just when
`tnc_delete()` is about to delete `zroot` and `zp2`:
zroot
\
\
zp2
\
\
zn
`zroot` and `zp2` get freed and the tree collapses:
zn
`zn` now becomes the new `zroot`.
`get_znodes_to_commit()` will now only find `zn`, the new `zroot`, and
`write_index()` will check its `znode->cparent` that wrongly points to
the already freed `zp1`. `ubifs_copy_hash()` thus gets wrongly called
with `znode->cparent->zbranch[znode->iip].hash` that triggers the
use-after-free!
Fix this by explicitly setting `znode->cparent` to `NULL` in
`get_znodes_to_commit()` for the root node. The search for the dirty
nodes
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: Add cancel_work_sync before module remove
If we remove the module which will call mpc52xx_spi_remove
it will free 'ms' through spi_unregister_controller.
while the work ms->work will be used. The sequence of operations
that may lead to a UAF bug.
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in mpc52xx_spi_remove. |
| Vim is an open source, command line text editor. A use-after-free was found in Vim < 9.1.0764. When closing a buffer (visible in a window) a BufWinLeave auto command can cause an use-after-free if this auto command happens to re-open the same buffer in a new split window. Impact is low since the user must have intentionally set up such a strange auto command and run some buffer unload commands. However this may lead to a crash. This issue has been addressed in version 9.1.0764 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| In Eclipse Mosquito, versions from 2.0.0 through 2.0.18, if a Mosquitto broker is configured to create an outgoing bridge connection, and that bridge connection has an incoming topic configured that makes use of topic remapping, then if the remote connection sends a crafted PUBLISH packet to the broker a double free will occur with a subsequent crash of the broker. |
| libmodbus v3.1.6 was discovered to contain a use-after-free via the ctx->backend pointer. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted message sent to the unit-test-server. |
| FFmpeg n7.0 is affected by a Double Free via the rkmpp_retrieve_frame function within libavcodec/rkmppdec.c. |
| A double-free issue could have occurred in `sec_pkcs7_decoder_start_decrypt()` when handling an error path. Under specific conditions, the same symmetric key could have been freed twice, potentially leading to memory corruption. This vulnerability affects Firefox < 133, Thunderbird < 133, Firefox ESR < 128.7, and Thunderbird < 128.7. |
| In the Linux kernel, the following vulnerability has been resolved:
IORING_OP_READ did not correctly consume the provided buffer list when
read i/o returned < 0 (except for -EAGAIN and -EIOCBQUEUED return).
This can lead to a potential use-after-free when the completion via
io_rw_done runs at separate context. |
| A use-after-free vulnerability was discovered in BusyBox v.1.36.1 via a crafted awk pattern in the awk.c copyvar function. |
| A use-after-free vulnerability in BusyBox v.1.36.1 allows attackers to cause a denial of service via a crafted awk pattern in the awk.c evaluate function. |
| loadImage() in tools/tiffcrop.c in LibTIFF through 4.5.0 has a heap-based use after free via a crafted TIFF image. |
| xmlXIncludeAddNode in xinclude.c in libxml2 before 2.11.0 has a use-after-free. |
| Use After Free in GitHub repository vim/vim prior to 9.0.0360. |
| Use after free in append_command in GitHub repository vim/vim prior to 8.2.4895. This vulnerability is capable of crashing software, Bypass Protection Mechanism, Modify Memory, and possible remote execution |
| vim is vulnerable to Use After Free |
| vim is vulnerable to Use After Free |
| A double-free was found in the way 389-ds-base handles virtual attributes context in persistent searches. An attacker could send a series of search requests, forcing the server to behave unexpectedly, and crash. |
| A use-after-free in Busybox's awk applet leads to denial of service and possibly code execution when processing a crafted awk pattern in the nvalloc function |
