| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm: pmem: keep PREFLUSH before data writes
pmem_submit_bio() records a REQ_PREFLUSH error, but continues to copy the
bio data and can later overwrite the error with a successful REQ_FUA flush.
That lets data writes run after a failed preflush and can complete the bio
successfully despite the failed ordering barrier.
Run the REQ_PREFLUSH flush synchronously before touching the bio data and
complete the bio with the flush error if it fails. Keep asynchronous flush
chaining for REQ_FUA. At that point, data copy has completed and the parent
bio can wait for the chained flush bio. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: fix duplicate handle when node ID pool is exhausted
gen_new_kid() falls back to returning max (htid | 0xFFF) when both
idr_alloc_u32() ranges are full, instead of reporting an error.
u32_change() trusts that value and inserts a new knode with a handle
that is already live in the hash table, breaking handle uniqueness
within the table's node ID space.
The handle was never reserved in ht->handle_idr, so every later error
path that does idr_remove(&ht->handle_idr, handle) removes the
reservation of a different, live knode, which is then reused — one
failed add compounds into further duplicates.
The 4095 limit is per (table, bucket) — ht->handle_idr is per hash
table and the range is derived from htid (bucketid), so a table with
divisor 256 can legitimately hold 256*4095 knodes.
The sibling helper gen_new_htid() has the same silent in-band failure:
it returns 0 when the tp_c handle pool (1..0x7FF) is full, and
u32_init() publishes the root hash table with handle 0 without
checking. Two root tables with handle 0 alias in u32_lookup_ht(),
allowing cross-tcf_proto knode add/lookup/delete. Add the same
exhaustion check that the divisor path already has.
Return an error so u32_change() fails with ENOSPC/ENOMEM when the
node ID space is exhausted, and so u32_init() fails with -ENOMEM
when the hash table ID space is exhausted. The extack message
distinguishes pool exhaustion (-ENOSPC) from a transient allocation
failure (-ENOMEM).
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_CLS_U32=y (or =m with module loaded)
- Create a clsact qdisc on a device, then add 4095 u32 filters with
auto-generated handles to fill the node ID space for the root hash
table (single bucket). The 4096th auto-handle filter add triggers
the duplicate handle (fh 800::fff reused). Reachable at Level 2
(unshare -Urn, namespace-local CAP_NET_ADMIN).
- For gen_new_htid: create 2047 u32 proto entries on the same block
to fill the tp_c handle pool, then create one more. The root table
gets handle 0 and aliases with other handle-0 root tables. |
| Discord libdave before 1.2.0 did not reject an MLS Welcome message when the resulting group roster contained an unrecognized participant. An attacker in control of the DAVE signaling path (the voice gateway, or an equivalent position able to add, alter, or withhold signaling messages to a client) could cause affected clients to accept an unauthorized member into the end-to-end encrypted media session, compromising the confidentiality and integrity of audio and video. |
| Improper certificate validation, Return of wrong status code vulnerability in Apache Thrift python bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| Use of uninitialized resource, Return of wrong status code vulnerability in Apache Thrift c_glib bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| openssl_encrypt versions before 1.4.0 contain a critical vulnerability in pqc.py where KEM decapsulation failures silently fall back to simulation mode, generating a deterministic shared secret from only 16 bytes of the private key and publicly available encapsulated key data. Attackers who obtain 16 bytes of the private key can compute the shared secret and decrypt all ciphertext, as the fallback triggers on any KEM failure without raising an error. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix handling of EBUSY in PHMAC when req is pushed to crypto engine
When a request is transferred to the engine via
crypto_transfer_hash_request_to_engine() there are two return codes
signaling a successful transfer: EINPROGRESS and EBUSY. However the
correct handling of EBUSY was missing and has been added as a return
code indicating a successful transfer to the crypto engine. |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Fix ethosu_job_open() return value
A WARN_ON() returns a 0 or 1, not the original negative errno. Just drop
the WARN_ON() as the FD open will pass the return code to userspace and
there's only one possible source of the error (drm_sched_entity_init()). |
| A denial-of-service vulnerability exists in the API endpoint of HPE Networking Instant On that could allow an authenticated attacker with administrative privileges to cause a denial of service. Successful exploitation could allow an attacker to interrupt the normal operation of the affected service, which resumes without manual intervention. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: propagate DACL parsing errors
parse_dacl() silently accepts truncated ACEs and allocation failures,
allowing set_info_sec() to continue with an incomplete ACL conversion.
Return parsing and allocation errors to parse_sec_desc() so malformed
security descriptors are rejected before inode attributes or ACL xattrs
are updated. |
| Zammad is a web based open source helpdesk/customer support system. Prior to 7.0.2, summary In Zammad's inbound PGP email processing, the return value of the gpg verification call was silently discarded. Regardless of whether gpg reported a valid, invalid, or missing signature, the handler unconditionally wrote sign: { success: true, comment: "Good signature" } to the article's security preferences. Impact Any sender could tamper with the body of a multipart/signed PGP email, or craft a message with an entirely fabricated or mismatched signature, and Zammad would display it to the recipient as cryptographically verified with a "Good signature" label. Users and agents relying on Zammad's signature indicator to confirm message authenticity and integrity would be misled into trusting modified or forged content. The vulnerability affects all inbound PGP-signed emails processed while the PGP integration is enabled. This issue is fixed in version 7.0.2. |
| In Mbed TLS 3.2.0 though 3.6.6 and 4.0.0 through 4.1.0, an attacker who can cause an entropy source to fail can remove or inject bytes into the start of the TLS stream. This only affects TLS 1.3 servers. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: use skb_get() instead of skb_clone() for req_skb
BT enable fails intermittently with -ETIMEDOUT (-110). The kernel log
shows the HCI Read Local Version command was sent and the firmware
replied with status 0x00 (logged by hci_req_cmd_complete() BT_DBG),
but the waiter in __hci_cmd_sync_sk() never woke up and timed out
after 10 s:
bluetooth hci0: Opcode 0xfc00 // __hci_cmd_sync_sk
bluetooth hci0: opcode 0xfc00 plen 1 // hci_cmd_sync_add
bluetooth hci0: skb len 4 // hci_cmd_sync_alloc
bluetooth hci0: length 1 // hci_req_sync_run
Bluetooth: hci0 cmd_cnt 1 cmd queued 1 // hci_cmd_work
Bluetooth: hci0 type 1 len 4 // hci_send_frame
Bluetooth: opcode 0xfc00 status 0x00 // hci_req_cmd_complete
<-- req_skb NULL: req_complete_skb not set,
hci_cmd_sync_complete() never called,
req_status stays HCI_REQ_PEND -->
<-- 10 s later: wait_event_interruptible_timeout expires -->
bluetooth hci0: end: err -110 // __hci_cmd_sync_sk
The root cause is that hci_send_cmd_sync() clones the sent command
into hdev->req_skb so that hci_req_cmd_complete() can locate the
registered completion callback. Under memory pressure this
skb_clone() fails, leaving hdev->req_skb NULL. The firmware reply
is received and processed, but hci_req_cmd_complete() finds NULL
req_skb, so hci_cmd_sync_complete() is never called, req_status
stays HCI_REQ_PEND, and the waiter times out with -ETIMEDOUT.
req_skb is only used to read bt_cb(skb)->hci callbacks and opcode --
it is never modified. Replace skb_clone() with skb_get(), which
simply increments the reference count of hdev->sent_cmd without
allocating new memory and therefore cannot fail.
This issue was first observed as a use-after-free in ttyport_close()
when ttyport_open() failed, which was investigated in an earlier
patch series [1]. That investigation led to the discovery of the
true root cause described above.
[1] https://lore.kernel.org/all/20250430111617.1151390-1-quic_cxin@quicinc.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
fs: don't return -EINVAL for successful nested thaw
Commit 7366f8b6fc6a ("fs: handle freezing from multiple devices")
replaced the freeze_holders bitmask with per-holder counters to allow
nested freezes. In the bitmask version, a thaw that released a shared
hold while another holder remained returned 0. Since the rework,
thaw_super_locked() drops the freeze reference via freeze_dec() but
then returns -EINVAL when other freezers remain, misinforming the
caller: the thaw did succeed, the superblock just stays frozen for the
remaining holders.
This breaks bdev-initiated freezing. When a filesystem is frozen with
FIFREEZE and additionally frozen via bdev_freeze() -- which nests by
design, see fs_bdev_freeze() -- the subsequent bdev_thaw() receives
-EINVAL from the holder op although its freeze reference was dropped,
and therefore keeps bd_fsfreeze_count elevated. Then device-mapper's
unlock_fs() ignores bdev_thaw()'s return value, so nothing rebalances
the count. After the user's FITHAW and umount, the block device can
never be mounted again:
dm-1: Can't mount, blockdev is frozen
There is no way for userspace to drop the leaked count; only
destroying the block device (or a reboot) recovers the device.
Reproducer (any kernel since v6.8):
dmsetup create dut --table "0 $(blockdev --getsz "$DEV") linear $DEV 0"
mkfs.ext4 /dev/mapper/dut
mount /dev/mapper/dut /mnt
fsfreeze --freeze /mnt # freeze_ucount == 1
dmsetup suspend dut # bd_fsfreeze_count == 1, ucount == 2
dmsetup resume dut # ucount 2 -> 1, but thaw_super()
# returns -EINVAL, so bdev_thaw()
# keeps bd_fsfreeze_count at 1
fsfreeze --unfreeze /mnt # filesystem thaws fine
umount /mnt
mount /dev/mapper/dut /mnt # EBUSY, forever
The same happens with fsfreeze held across an LVM snapshot of the
origin volume.
fs_bdev_thaw()'s documentation already describes the intended
semantics: "If this function returns zero it doesn't mean that the
filesystem is unfrozen as it may have been frozen multiple times".
Restore them by returning 0 when a nested thaw drops its hold while
other freezers remain. Thawing without holding a freeze still fails
with -EINVAL as may_unfreeze() rejects that case before the reference
count is touched. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix wrong return code to engine in asynch callbacks
When crypto_finalize_hash_request() or
crypto_finalize_skcipher_request() explicitly completes a request, the
do_one_request callback must return 0 to indicate successful
handling. Returning a negative error code causes the crypto engine to
assume the driver failed to take ownership and triggers a second
completion via crypto_request_complete(), resulting in a double
completion. This pattern occurs in paes_s390.c 4 times and once in
phmac_s390.c.
Fixed in phmac_do_one_request() and all four paes do_one_request
callbacks (ecb, cbc, ctr, xts) by returning 0 after explicit
finalization instead of propagating the error code. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Map EBUSY to EIO when key conversion fails repeatedly
When hardware persistently returns -EBUSY after exhausting retries,
the error propagates to crypto_finalize_*_request(). The crypto API's
completion wrapper treats -EBUSY as a queueing status and swallows it,
preventing the completion callback from firing. This causes callers
using crypto_wait_req() to block indefinitely.
Translate persistent -EBUSY to -EIO after retry exhaustion to ensure
proper error propagation and callback invocation. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: put the chained BO when its mapping fails
amdxdna_cmd_set_error() looks up the first BO of a command chain, which
takes a reference, and drops it at the end of the function. The mapping of
that BO is established in between, and the failure path returns without the
put, so the reference is leaked.
Ordinary use does not reach it. The chain has been submitted before any of
this runs, so aie2_cmdlist_fill_slot() has already called
amdxdna_cmd_get_op() on that BO and amdxdna_gem_vmap() has cached its
address. What makes it reachable is that the BO is resolved again by
handle here, and the handle is userspace's to recycle: closing it after
submission and importing a dma-buf whose exporter implements no vmap onto
the same id leaves amdxdna_gem_get_obj() returning an object this cannot
map, since prime_import() types every import AMDXDNA_BO_SHARE. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: fsl_micfil: balance mclk enable/disable
hw_params() enables mclk unconditionally and hw_free() disables it
unconditionally, but the PCM core does not guarantee 1:1 pairing:
hw_free() can run without hw_params(), and hw_params() can be called
multiple times from the SETUP state. This triggers an "already
disabled" WARN() in the first case and leaks an enable reference in
the second, leaving the clock ungateable.
Guard both sides with the existing mclk_flag, as fsl_sai.c does with
mclk_streams. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/dmem: fix callocated underflow on large folio split
nouveau_dmem_folio_free() drops chunk->callocated once per freed folio,
while a large (compound) device-private folio is only counted once when
it is allocated. When such a folio is split, the mm core invokes
->folio_split() (nouveau_dmem_folio_split()) once for each new
sub-folio, but the hook only fixes up the sub-folio metadata and leaves
chunk->callocated unchanged.
Each resulting sub-folio is later freed separately, so after a split
the single allocation (+1) is met by N frees (-N), leaving
chunk->callocated short by N-1. On the first split/free cycle it
underflows: WARN_ON(!chunk->callocated) fires, the unsigned counter
wraps and never returns to zero, so the chunk can no longer be
reclaimed (nouveau_dmem_fini() also warns on the leaked count).
Account for the new sub-folio in the split hook, under the same lock as
nouveau_dmem_folio_free(), so the count stays balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
memcg: bypass the reclaim and oom killer for dying tasks once oom_reaper is done
At Meta, we are seeing instances where an OOM killed job is stuck in the
exit path for several hours. In one particular case, the job was stuck
for more than 8 hours and I had to manually remove the memory.max limits
to allow the process to exit.
The job was a single process job and had ~55 GiB memory.max and zswap
enabled. It had almost 0 anon in memory and ~111 GiB in zswap compressed
to ~51 GiB zswap pool (i.e. almost all of memory.current was zswap).
Nothing was left on the LRUs to reclaim.
On further inspection, I observed ~20k threads of that process stuck with
the following stack:
[<0>] mem_cgroup_out_of_memory+0x4e/0xa0
[<0>] charge_memcg+0x8bf/0x990
[<0>] mem_cgroup_swapin_charge_folio+0x4e/0x80
[<0>] __read_swap_cache_async+0x10c/0x260
[<0>] swapin_readahead+0x116/0x3f0
[<0>] do_swap_page+0x13c/0x1ce0
[<0>] handle_mm_fault+0x61d/0x11f0
[<0>] do_user_addr_fault+0x3e7/0x6d0
[<0>] exc_page_fault+0x8f/0x110
[<0>] asm_exc_page_fault+0x22/0x30
[<0>] __get_user_8+0x14/0x20
[<0>] futex_cleanup+0x27/0x1c0
[<0>] futex_exit_release+0x47/0x60
[<0>] do_exit+0x107/0x940
[<0>] do_group_exit+0x81/0xa0
[<0>] get_signal+0x2b1/0x6e0
[<0>] arch_do_signal_or_restart+0x1a/0x1c0
[<0>] exit_to_user_mode_loop+0xa8/0x1c0
[<0>] do_syscall_64+0x152/0x250
[<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53
In addition the dmesg was filled with "Out of memory and no killable
processes..." messages.
I have no idea why oom reaper was not able to reap/unmap the process. My
guess is that since oom reaper tries to acquire mmap_lock in read mode
limited number of times and then gives up, there might be a thread of that
process which had mmap_lock in write mode at that time.
My initial suspicion was the futex_cleanup and kernel page fault causing
infinite fault and charge retries but that was put to rest in previous
discussions happened on similar problem [1].
My current theory is that it is just a simple slow serialization behind
the oom_lock. Unlike page allocator, memcg charge code takes the oom_lock
without the "try". Though memcg oom code uses mutex_lock_killable(), note
that in the call stack get_signal() consumes SIGKILL (or
sigdelset(SIGKILL)) before calling do_group_exit(). So this
mutex_lock_killable() is just a mutex_lock() here. Therefore 10s of
thousands of threads are waiting on oom_lock and one by one they get
-EFAULT from get_user() in the futex cleanup code and bails out.
Discussion from [1] led to commit a75ffa26122b ("memcg, oom: do not bypass
oom killer for dying tasks") which routes dying tasks into the OOM path
precisely so the oom_reaper can reap their mm and free the memory
asynchronously. But the reaper is best-effort and one-shot: if it cannot
take mmap_lock for read (e.g. a sibling thread holds it for write) it
sets MMF_OOM_SKIP and never retries, leaving only the glacial
oom_lock-serialized synchronous drain.
Once MMF_OOM_SKIP is set there is no more asynchronous reclaim coming for
the mm, so a dying task charging against it has nothing left to wait for:
it frees its memory only once it finishes exiting. Running reclaim and
the (no-victim) OOM killer for it is then pointless, and doing it for 10s
of thousands of exiting threads is what serializes them behind oom_lock.
So before reclaim, if current is an OOM victim whose reaper is done, fail
the charge.
Reproduced with 20k threads, each parking a robust futex head on its own
zswapped page, OOM-group-killed while a sibling holds mmap_lock for write
so the reaper gives up and sets MMF_OOM_SKIP. Tested on next-20260728 and
baseline show ~90 seconds exit time while with the patch the exit time
reduced to ~3 seconds. |
