| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: conntrack: avoid modifying shared unconfirmed ct entry
In a case where skb with an unconfirmed ct entry gets cloned, we may
end up committing both but with different sets of extensions.
The series of events:
1. The first clone wants to commit and runs the helpers wiring up
the extension pointer into the expectation list.
2. Then it looses the confirmation keeping the entry unconfirmed.
3. Second clone now wants to commit labels and adds the new extension
for that breaking the pointer in the expectation list causing
UAF on the destruction path later.
While this is possible to trigger, there should be no practical
network pipeline where committing both clones without modifications
into the same zone is needed. So, let's just reset the entry in case
for some reason we got an skb with a shared one during commit. This
doesn't affect any known use cases, but avoids any potential problems
with sharing and modification of the unconfirmed ct entry.
The fixes tag points to the introduction of helpers, since that's the
main UAF trigger for the sharing. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mdb: restart port group walk after deletion
br_mdb_flush_pgs() keeps a pointer-to-pointer cursor while walking
mp->ports. br_multicast_del_pg() can re-enter the same MDB entry through
br_multicast_sg_del_exclude_ports() and unlink other port groups. If the
cursor points into one of those groups, the next iteration dereferences a
stale cursor and can leave mp->ports pointing at freed memory.
A following RTM_GETMDB exposes the dangling pointer:
BUG: KASAN: slab-use-after-free in br_mdb_dump
Read of size 8
br_mdb_dump
rtnl_mdb_dump
rtnl_dumpit
netlink_dump
Reset the cursor to mp->ports after every deletion. The deletion removes at
least the selected group, so the restarted walk always makes progress. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ena: fix MMIO read buffer leak on probe failure
ena_device_init() initializes the MMIO read mechanism with
ena_com_mmio_reg_read_request_init(), which allocates a coherent DMA
buffer for MMIO read responses.
The normal removal path releases this buffer through
ena_com_mmio_reg_read_request_destroy(). However, if ena_probe() fails
after ena_device_init() succeeds, the error path destroys the admin
resources and eventually frees ena_dev without destroying the MMIO read
request, leaving the coherent DMA buffer allocated.
Call ena_com_mmio_reg_read_request_destroy() in the probe error path
before releasing the remaining device resources.
This issue was found by manual code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: fix use-after-free in nfc_get_local_general_bytes
Commit 6709d4b7bc2e ("net: nfc: Fix use-after-free caused by
nfc_llcp_find_local") attempted to fix a use-after-free (UAF) issue by
invoking nfc_llcp_local_put(local) after accessing local->gb. However,
if the reference count drops to zero, local is freed immediately,
leading to a use-after-free when callers access the returned pointer.
Alternative approaches using dynamic allocation (e.g. kmemdup) introduced
memory leaks because callers consistently treat the returned pointer as
borrowed memory.
Fix this properly by refactoring nfc_llcp_general_bytes() and
nfc_get_local_general_bytes() to accept a caller-provided output buffer
(out_gb) and its maximum length (gb_max_len). The general bytes are
safely copied into out_gb before calling nfc_llcp_local_put(local),
ensuring safe lifetime management without ownership transfer complications.
Update all callers across drivers (microread, pn533, pn544, st21nfca,
digital_dep, and nci) to provide their own destination buffers and pass
them to nfc_get_local_general_bytes(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: drop truncated I/RR/RNR PDUs in nfc_llcp_recv_hdlc()
nfc_llcp_recv_hdlc() reads the sequence byte skb->data[2], via
nfc_llcp_ns()/nfc_llcp_nr(), before any length check. The receive path
only guarantees the two-byte LLCP header -- __nfc_llcp_recv() checks it
with pskb_may_pull() and nfc_llcp_recv_agf() admits two-byte inner PDUs
-- so a two-byte I, RR or RNR PDU reads one byte of uninitialised skb
tailroom. The byte becomes N(R)/N(S); a peer can already set those with
a well-formed PDU, so this is acting on uninitialised memory, not new
peer control.
Guard the read with pskb_may_pull(), as commit 95674f506c63 ("nfc: llcp:
reject PDUs shorter than the LLCP header") did for the two-byte header,
so the sequence byte is present and linear before it is read. RR and RNR
PDUs are LLCP_HEADER_SIZE + LLCP_SEQUENCE_SIZE bytes and an I PDU is
longer, so no valid frame is rejected; a truncated PDU is malformed, so
return without a DM reply. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: port100: reject frames whose declared length exceeds the received data
port100_recv_response() passes the URB transfer buffer to
port100_rx_frame_is_valid(), which checksums le16_to_cpu(frame->datalen)
bytes of frame->data. datalen is a 16-bit field supplied by the device
and is never checked against the number of bytes actually received
(urb->actual_length), so a device reporting a datalen larger than the
received frame makes port100_data_checksum() read out of bounds past the
transfer buffer.
Reject a response whose declared frame size does not fit the received
length before validating it.
Found by 0sec (https://0sec.ai) using automated source analysis; the
missing bound is evident from source. Compile-tested. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: trf7970a: power down on startup RX gain failure
trf7970a_startup() powers up the device before applying the optional RX
gain reduction. If the register read or write fails, it returns without
undoing that power-up. Probe's unwind only drops the separate regulator
references acquired by probe, leaving the additional VIN enable from
startup unbalanced. The system resume caller also has no power-down on
this error.
Call trf7970a_power_down() before returning the RX gain error to deassert
the enable GPIOs, release the startup VIN reference and restore the
powered-off state. Runtime PM has not been enabled yet, so the full
shutdown helper is not appropriate here. Preserve the original SPI error.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: Fix NULL pointer dereference in ccw_device_get_util_str()
The channel path registry entry associated with a CHPID may be removed
while the subchannel's PMCW still references that CHPID. In this case,
chpid_to_chp() can return NULL, leading to a NULL pointer dereference.
Add the missing NULL check before dereferencing the returned pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Do cache maintenance on the source VM during intra-host migration
Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.
Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Don't WARN on an unknown VM ioctl in protected mode
kvm_pkvm_ioctl_allowed() WARNs when kvm_get_cap_for_kvm_ioctl() doesn't
find the ioctl number in vm_ioctl_caps[], and kvm_arch_vm_ioctl() calls
it for every number the generic code doesn't handle, so
ioctl(vm_fd, 0xdeadbeef) from userspace taints a pKVM host and panics it
under panic_on_warn. The lookup is fed userspace input: return false,
and userspace gets the -EINVAL kvm_arch_vm_ioctl() returns for that
number on a host without pKVM. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix spurious warning for benign stage 2 teardown race
kvmtool was used to establish an L1 guest with 8 CPUs and 8 GiB of RAM, an
L2 guest with 4 CPUs and 4 GiB of RAM and an L3 guest with 2 CPUs and 2 GiB
of RAM, all of which was then exited.
Under memory pressure in the L0 host warnings were observed due to
migration triggered by compaction:
WARNING: arch/arm64/kvm/mmu.c:336 at __unmap_stage2_range+0x64/0x80,
CPU#5: kcompactd0/66
Which was, in turn, triggered by an MMU notifier for the host invalidation:
mmu_notifier_invalidate_range_start()
-> ... -> kvm_mmu_notifier_invalidate_range_start()
-> kvm_mmu_unmap_gfn_range()
-> kvm_unmap_gfn_range()
-> kvm_nested_s2_unmap()
-> kvm_stage2_unmap_range()
-> __unmap_stage2_range()
-> stage2_apply_range()
<- -EINVAL, triggering a WARN_ON()
Racing with L0's teardown of stage 2 page tables:
exit_mm()
-> mmput()
-> __mmput()
-> exit_mmap()
-> mmu_notifier_release()
-> ... -> kvm_mmu_notifier_release()
-> kvm_flush_shadow_all()
-> kvm_arch_flush_shadow_all()
-> kvm_free_stage2_pgd()
-> [ acquire kvm->mmu_lock for write ]
-> mmu->pgt = NULL [ among other tasks ]
-> [ release kvm->mmu_lock for write ]
It turns out there is a benign race resulting in a spurious warning:
Thread A - notify: migration | Thread B - notify: release
-------------------------------|---------------------------------
< kvm->mmu_lock held > |
stage2_apply_range() |
get mmu->pgt, check !NULL |
... | kvm_arch_flush_shadow_all()
cond_resched_rwlock_write(); | < contend, sleep kvm->mmu_lock >
< drop kvm->mmu_lock > | < acquire kvm->mmu_lock>
| ...
| kvm_free_stage2_pgd()
| mmu->pgt = NULL
| < invalidate MMU >
| ...
| < release kvm->mmu_lock >
[ scheduled ] |
stage2_apply_range() |
< loop to next > |
get, mmu->pgt, check !NULL |
is NULL, return -EINVAL |
__unmap_stage2_range() |
WARN_ON(-EINVAL) <--- entirely spurious - the race was handled
correctly.
Fix the spurious warning by updating stage2_apply_range() to no longer
treat concurrent PGT teardown on lock release as an error - whether the
walker is tearing down page tables or doing something else this is a
legitimate reason to abort the operation without error.
This keeps the warning in place for all other circumstances.
In practice only __unmap_stage2_range() actually does anything with the
error so this only impacts that. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Derive SCX_RQ_IN_WAKEUP from the core enqueue flags
schedule_deferred_locked() skips scheduling a deferred action while
SCX_RQ_IN_WAKEUP is set and relies on the task_woken_scx() call that follows
a wakeup enqueue to run it. enqueue_task_scx() sets the flag from the merged
enqueue flags, which include the flags stashed for a remote activation.
move_remote_task_to_local_dsq() thus sets SCX_RQ_IN_WAKEUP on the
destination rq when the moved task was woken up, although no
task_woken_scx() follows that activation.
An IMMED insert into a busy destination requests a local reenqueue during
that enqueue. The request gets linked but not scheduled and stays pending
until an unrelated wakeup or preemption on that CPU runs the deferred
actions. The IMMED task sits behind the running task in the meantime. If
nothing runs them before the scheduler is disabled, the request outlives the
scheduler and points into its freed per-cpu area, which the next scheduler
dereferences from run_deferred().
Test the core enqueue flags for the wakeup bit. Only the core's wakeup path
is followed by task_woken_scx(). |
| The PickPlugins Product Designer for WooCommerce WordPress plugin through 1.0.40 does not perform any capability check and its nonce verification is inverted, accepting requests with an invalid or absent nonce while rejecting valid ones, and it does not validate the post the data is written to, allowing unauthenticated users to insert design template data into the metadata of any post on the site. |
| The Ad Inserter – Ad Manager & AdSense Ads plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.8.18 via the ai_wp_footer_hook. This makes it possible for authenticated attackers, with subscriber-level access and above, to extract sensitive data including the server's internal IP address, PHP configuration, WordPress and theme versions, hardening constants, the plugin's full block matrix, and all post meta values including underscore-prefixed protected keys such as API tokens and private integration state written by other plugins. |
| Heap-based buffer overflow in Windows NTFS allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Microsoft Windows Search Component allows an authorized attacker to elevate privileges locally. |
| Insufficient Session Expiration vulnerability in Progress MOVEit Transfer.
This issue affects MOVEit Transfer: before 2025.1.6 and from 2026.0.0 before 2026.0.4. |
| Improper handling of unicode encoding vulnerability in Progress MOVEit Transfer.
This issue affects MOVEit Transfer: before 2025.1.6 and from 2026.0.0 before 2026.0.4. |
| Insecure Storage of Sensitive Information vulnerability in Progress MOVEit Transfer.
This issue affects MOVEit Transfer: before 2025.1.6 and from 2026.0.0 before 2026.0.4. |
| Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in Progress MOVEit Transfer (Custom Reports module).
This issue affects MOVEit Transfer: before 2025.1.6 and from 2026.0.0 before 2026.0.4. |
