| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: hyper-v: Bound the bank index when querying sparse banks
When checking if a VP ID is included in a sparse bank set, explicitly check
that the ID can actually be contained in a sparse bank (the TLFS allows for
a maximum of 64 banks of 64 vCPUs each). When handling a paravirtual TLB
flush for L2, the VP ID is copied verbatim from the enlightened VMCS,
without any bounds check, i.e. isn't guaranteed to be under the limit of
4096.
Failure to check the bounds of the VP ID leads to an out-of-bounds read
when testing the sparse bank, and super strictly speaking could lead to KVM
performing an unnecessary TLB flush for an L2 vCPU.
==================================================================
BUG: KASAN: use-after-free in hv_is_vp_in_sparse_set+0x85/0x100 [kvm]
Read of size 8 at addr ffff88811ba5f598 by task hyperv_evmcs/2802
CPU: 12 UID: 1000 PID: 2802 Comm: hyperv_evmcs Not tainted 7.1.0-rc2 #7 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x51/0x60
print_report+0xcb/0x5d0
kasan_report+0xb4/0xe0
kasan_check_range+0x35/0x1b0
hv_is_vp_in_sparse_set+0x85/0x100 [kvm]
kvm_hv_flush_tlb+0xe9e/0x16c0 [kvm]
kvm_hv_hypercall+0xe6b/0x1e60 [kvm]
vmx_handle_exit+0x485/0x1b60 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0x22e3/0x5070 [kvm]
kvm_vcpu_ioctl+0x5d0/0x10c0 [kvm]
__x64_sys_ioctl+0x129/0x1a0
do_syscall_64+0xb9/0xcf0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f0e62d1a9bf
</TASK>
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffffffffffffffff pfn:0x11ba5f
flags: 0x4000000000000000(zone=1)
raw: 4000000000000000 0000000000000000 00000000ffffffff 0000000000000000
raw: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88811ba5f480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88811ba5f500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff88811ba5f580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff88811ba5f600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88811ba5f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
Disabling lock debugging due to kernel taint
Opportunistically add a compile time assertion to ensure the maximum number
of sparse banks exactly matches the number of possible bits in the passed
in mask.
[sean: add KASAN splat, drop comment, add assert, massage changelog] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: consume only present negotiated TTLM maps
ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements
against the number of link-map entries indicated by link_map_presence.
ieee80211_parse_neg_ttlm() must consume the same layout.
The parser advanced its cursor for every TID, including TIDs whose
presence bit is clear and therefore have no map bytes in the element.
A sparse map can then make a later present TID read past the validated
element.
The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by
valid_links before being applied to driver state, so a peer cannot
turn the read into a policy change. Under KUnit + KASAN with an
exact-sized element allocation the OOB read is reported as a
slab-out-of-bounds; whether the same trigger fires under the
production RX path depends on surrounding allocator state.
Advance the cursor only when the current TID has a map present. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: avoid double free of pool->stack on AQ init failure
otx2_pool_aq_init() frees pool->stack when mailbox sync or retry
allocation fails, but leaves the pointer unchanged. Later,
otx2_sq_aura_pool_init() unwinds the partial setup through
otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific
cn20k_pool_aq_init() implementation has the same bug in
its corresponding error path.
Set pool->stack to NULL immediately after the local free so the shared
cleanup path does not free the same stack again while cleaning up
partially initialized pool state.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc3.
Runtime validation was not performed because reproducing this path
requires OcteonTX2/CN20K hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: stub: Reject I2C block transfers with invalid length
The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.
A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:
BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
Read of size 1 at addr ffff88800abcfd92 by task exploit/81
Call Trace:
<TASK>
stub_xfer (drivers/i2c/i2c-stub.c:223)
__i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
__x64_sys_ioctl (fs/ioctl.c:583)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.
Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: fix race between dump and ip_set_list resize
The release path of ip_set_dump_do() and ip_set_dump_done() read
inst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw()
of the array pointer. These run from netlink_recvmsg() without the nfnl
mutex and without an RCU read-side critical section.
A concurrent ip_set_create() can grow the array: it publishes the new
array, calls synchronize_net() and then kvfree()s the old one. Since the
dump paths read the array outside any RCU reader, synchronize_net() does
not wait for them and the old array can be freed while they still index
into it, causing a use-after-free.
The dumped set itself stays pinned via set->ref_netlink, so only the
array load needs protecting. Take rcu_read_lock() around it, matching
ip_set_get_byname() and __ip_set_put_byindex().
BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697)
Read of size 8 at addr ffff88800b5c4018 by task exploit/150
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697)
netlink_dump (net/netlink/af_netlink.c:2325)
netlink_recvmsg (net/netlink/af_netlink.c:1976)
sock_recvmsg (net/socket.c:1159)
__sys_recvfrom (net/socket.c:2315)
...
Oops: general protection fault, probably for non-canonical address ... KASAN NOPTI
KASAN: maybe wild-memory-access in range [0x02d6...d0-0x02d6...d7]
RIP: 0010:ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1698)
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: Fix UAF read of dev->name
bnep_add_connection() needs to keep holding the bnep_session_sem while
reading dev->name (just like bnep_get_connlist() does); otherwise the
bnep_session() thread can concurrently free the net_device, which can for
example be triggered by a concurrent bnep_del_connection().
(This UAF is fairly uninteresting from a security perspective;
calling bnep_add_connection() requires passing a capable(CAP_NET_ADMIN)
check. It also requires completely tearing down a netdev during a fairly
tight race window.) |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Don't setup bogus iov_iter for silencing
At transition to the iov_iter for PCM data transfer, we blindly
applied the iov_iter setup also for silencing (i.e. data = NULL), and
it leads to a calculation of bogus iov_iter. Fortunately this didn't
cause troubles on most of architectures but it goes wrong on RISC-V
now, causing a NULL dereference.
Handle the NULL data case to treat the silencing in interleaved_copy()
for addressing the bug above. noninterleaved_copy() has already the
NULL data handling, so it doesn't need changes. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: asihpi: Fix potential OOB array access at reading cache
find_control() to retrieve a cached info accesses the array with the
given index blindly, which may lead to an OOB array access.
Add a sanity check for avoiding it. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate Add Extended Advertising Data length
MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command,
with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler
then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy
cp->data, but it never checks that those bytes are part of the mgmt
command payload.
A short command can therefore make add_ext_adv_data() pass an
out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond
the command buffer are addressable, they can also be copied into the
advertising instance as scan response data, where the caller can read
them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires
CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte
slab-out-of-bounds read.
Reject commands whose length does not match the fixed header plus both
advertising data lengths before parsing cp->data. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: defer node table free until after RCU readers
HSR node-list and node-status generic-netlink operations run under
rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and
hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table
with plain list_del() and frees each node immediately.
That lets a generic-netlink reader hold a struct hsr_node pointer across
hsr_dellink(). In a KASAN build, widening the reader window after
hsr_get_next_node() obtains the node reproduces a slab-use-after-free
when the reader copies node->macaddress_A; the freeing stack is
hsr_del_nodes() from hsr_dellink().
Use list_del_rcu() and defer the free through the existing
hsr_free_node_rcu() callback. This matches the lifetime rule used by the
HSR prune paths, which already delete nodes with list_del_rcu() and
call_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
qed: fix double free in qed_cxt_tables_alloc()
If one of the later PF or VF CID bitmap allocations fails,
qed_cid_map_alloc() jumps to cid_map_fail and frees the previously
allocated CID bitmaps before returning an error. qed_cxt_tables_alloc()
then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free()
again.
Fix this by setting each CID bitmap pointer to NULL after bitmap_free()
to avoid double free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime reproduction was not attempted because exercising the failing
allocation path requires device-specific setup. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: fix UAF when peer resets connection during handshake
vmci_transport_recv_connecting_server() returned err = 0 for a peer
RST in its default switch arm:
err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL;
That made vmci_transport_recv_listen() skip vsock_remove_pending(),
leaving the pending socket on the listener's pending_links with
sk_state = TCP_CLOSE while destroy: still dropped the explicit
reference taken before schedule_delayed_work().
One second later vsock_pending_work() observed is_pending=true and
performed full cleanup: vsock_remove_pending() then the two trailing
sock_put(sk) calls -- the first reached refcount 0 and __sk_freed
the socket, and the second wrote into the freed object:
BUG: KASAN: slab-use-after-free in refcount_warn_saturate
Write of size 4 at addr ffff88800b1cac80 by task kworker
Workqueue: events vsock_pending_work
Treat peer RST like any other unexpected packet type (err = -EINVAL).
All destroy: arms now return err < 0, so vmci_transport_recv_listen()
removes pending from pending_links synchronously and
vsock_pending_work() takes the is_pending=false / !rejected branch,
dropping only its own work reference. This also closes the
multi-packet race Sashiko reported on v2: pending is removed from
the list before any subsequent packet can find it.
The pre-existing sk_acceptq_removed() gap on the err < 0 path of
vmci_transport_recv_listen() that Sashiko also noted is not
introduced or changed by this patch.
Tested on lts-6.12.79 with KASAN: 52/100 unpatched -> 0/100 patched. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Fix UAF read of tail->len in unix_stream_data_wait()
unix_stream_data_wait() does skb_peek_tail(&sk->sk_receive_queue) without
holding any lock that prevents SKBs on that queue from being dequeued and
freed.
This has been the case since commit 79f632c71bea ("unix/stream: fix
peeking with an offset larger than data in queue").
The first consequence of this is that the pointer comparison
`tail != last` can be false even if `last` semantically refers to an
already-freed SKB while `tail` is a new SKB allocated at the same address;
which can cause unix_stream_data_wait() to wrongly keep blocking after new
data has arrived, but only in a weird scenario where a peeking recv() and
a normal recv() on the same socket are racing, which is probably not a
real problem.
But since commit 2b514574f7e8 ("net: af_unix: implement splice for stream
af_unix sockets"), `tail` is actually dereferenced, which can cause UAF in
the following race scenario (where test_setup() runs single-threaded,
and afterwards, test_thread1() and test_thread2() run concurrently in
two threads:
```
static int socks[2];
void test_setup(void) {
socketpair(AF_UNIX, SOCK_STREAM, 0, socks);
send(socks[1], "A", 1, 0);
int peekoff = 1;
setsockopt(socks[0], SOL_SOCKET, SO_PEEK_OFF, &peekoff, sizeof(peekoff));
}
void test_thread1(void) {
char dummy;
recv(socks[0], &dummy, 1, MSG_PEEK);
}
void test_thread2(void) {
char dummy;
recv(socks[0], &dummy, 1, 0);
shutdown(socks[1], SHUT_WR);
}
```
when racing like this:
```
thread1 thread2
unix_stream_read_generic
mutex_lock(&u->iolock)
skb_peek(&sk->sk_receive_queue)
skb_peek_next(skb, &sk->sk_receive_queue)
mutex_unlock(&u->iolock)
unix_stream_read_generic
unix_state_lock(sk)
skb_peek(&sk->sk_receive_queue)
unix_state_unlock(sk)
unix_stream_data_wait
unix_state_lock(sk)
tail = skb_peek_tail(&sk->sk_receive_queue)
spin_lock(&sk->sk_receive_queue.lock)
__skb_unlink(skb, &sk->sk_receive_queue)
spin_unlock(&sk->sk_receive_queue.lock)
consume_skb(skb) [frees the SKB]
`tail != last`: false
`tail`: true
`tail->len != last_len` ***UAF***
```
Fix the UAF by removing the read of tail->len; checking tail->len would
only make sense if SKBs in the receive queue of a UNIX socket could grow,
which can no longer happen.
Kuniyuki explained:
> When commit 869e7c62486e ("net: af_unix: implement stream sendpage
> support") added sendpage() support, data could be appended to the last
> skb in the receiver's queue.
>
> That's why we needed to check if the length of the last skb was changed
> while waiting for new data in unix_stream_data_wait().
>
> However, commit a0dbf5f818f9 ("af_unix: Support MSG_SPLICE_PAGES") and
> commit 57d44a354a43 ("unix: Convert unix_stream_sendpage() to use
> MSG_SPLICE_PAGES") refactored sendmsg(), and now data is always added
> to a new skb.
That means this fix is not suitable for kernels before 6.5. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Validate GPIO pin LUT table size before iterating
[Why&How]
The GPIO pin table parsers in get_gpio_i2c_info() and
bios_parser_get_gpio_pin_info() derive an element count from the VBIOS
table_header.structuresize field, then iterate over gpio_pin[] entries.
However, GET_IMAGE() only validates that the table header itself fits
within the BIOS image. If the VBIOS reports a structuresize larger than
the actual mapped data, the loop reads past the end of the BIOS image,
causing an out-of-bounds read.
Fix this by calling bios_get_image() to validate that the full claimed
structuresize is accessible within the BIOS image before entering the
loop in both functions.
(cherry picked from commit ba5e95b43b773ae1bf1f66ee6b31eb774e65afe3) |
| In the Linux kernel, the following vulnerability has been resolved:
irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT
On PREEMPT_RT, non-HARD irq_work runs in per-CPU kthreads via
run_irq_workd(), so irq_work_sync() uses rcuwait() to wait for BUSY==0.
After irq_work_single() clears BUSY via atomic_cmpxchg(), it still
dereferences @work for irq_work_is_hard() and rcuwait_wake_up().
An irq_work_sync() caller on another CPU that enters after BUSY is cleared
can observe BUSY==0 immediately, return, and free the work before those
accesses complete — causing a use-after-free.
Fix this by wrapping run_irq_workd() in guard(rcu)() so that the entire
irq_work_single() execution is within an RCU read-side critical
section. Then add synchronize_rcu() in irq_work_sync() after
rcuwait_wait_event() to ensure the caller waits for the RCU grace period
before returning, preventing premature frees. |
| In the Linux kernel, the following vulnerability has been resolved:
block: don't overwrite bip_vcnt in bio_integrity_copy_user()
bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce
segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt
on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h
read past the bip_vec[] flex array. On READ the read is in bounds
but lands on a saved user bvec instead of the bounce.
The line was added for split propagation, but bio_integrity_clone()
doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slot
On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is
reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt()
populates V2 entries starting at index 1, so when no V1 device is
selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] ==
NULL and ism_chid[0] == 0.
smc_v2_determine_accepted_chid() then matches the peer's CHID against
the array starting from index 0 using the CHID alone. A malicious
peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches
the empty slot, ini->ism_selected becomes 0, and the subsequent
ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at
offsetof(struct smcd_dev, lgr_lock) == 0x68:
BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0
Write of size 4 at addr 0000000000000068 by task exploit/144
Call Trace:
_raw_spin_lock_bh
smc_conn_create (net/smc/smc_core.c:1997)
__smc_connect (net/smc/af_smc.c:1447)
smc_connect (net/smc/af_smc.c:1720)
__sys_connect
__x64_sys_connect
do_syscall_64
Require ism_dev[i] to be non-NULL before accepting a CHID match. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: mcast: Fix a possible use-after-free when removing a bridge port
When per-VLAN multicast snooping is enabled, the bridge iterates over
all the bridge ports, disables the per-port multicast context on each
port and enables the per-{port, VLAN} multicast contexts instead. The
reverse happens when per-VLAN multicast snooping is disabled.
When global multicast snooping is enabled, the bridge iterates over all
the bridge ports and enables the per-port multicast context on each
port. The reverse happens when multicast snooping is disabled.
The above scheme can result in a situation where both types of contexts
(per-port and per-{port, VLAN}) are enabled on a single bridge port:
# ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev br1 type bridge mcast_vlan_snooping 1
# ip link set dev br1 type bridge mcast_snooping 0
# ip link set dev br1 type bridge mcast_snooping 1
This is not intended and it is a problem since the commit cited below.
Prior to this commit, when removing a bridge port,
br_multicast_disable_port() would disable the per-port multicast context
and the per-{port, VLAN} multicast contexts would get disabled when
flushing VLANs.
After this commit, br_multicast_disable_port() only disables the
per-port multicast context if per-VLAN multicast snooping is disabled.
If both types of contexts were enabled on the port when it was removed,
the per-port multicast context would remain enabled when freeing the
bridge port, leading to a use-after-free [1].
Fix by preventing the bridge from enabling / disabling the per-port
multicast contexts when toggling global multicast snooping if per-VLAN
multicast snooping is enabled.
[1]
ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927)
WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0
[...]
Call Trace:
<IRQ>
__debug_check_no_obj_freed (lib/debugobjects.c:1116)
kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565)
kobject_cleanup (lib/kobject.c:689)
rcu_do_batch (kernel/rcu/tree.c:2617)
rcu_core (kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
__irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735)
irq_exit_rcu (kernel/softirq.c:752)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47))
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs
IEEE80211_MLE_STA_EPCS_CONTROL_LINK_ID is 0x000f, so link_id extracted
from a PRIO_ACCESS ML element PER_STA_PROFILE subelement can be 0..15.
sdata->link[] has IEEE80211_MLD_MAX_NUM_LINKS (15) entries (indices 0..14),
making index 15 out-of-bounds.
A connected WiFi 7 AP can trigger this by sending an EPCS Enable Response
action frame with a PER_STA_PROFILE subelement where link_id = 15. The
unsolicited-notification path (dialog_token = 0) is reachable any time
EPCS is already enabled, without any prior client request.
sdata->link[15] reads into the first word of sdata->activate_links_work
(a wiphy_work whose embedded list_head is non-NULL after INIT_LIST_HEAD),
so the NULL check on the result does not catch the invalid access. The
garbage pointer is then passed to ieee80211_sta_wmm_params(), which
dereferences link->sdata and crashes the kernel.
The same class of bug was fixed for ieee80211_ml_reconfiguration() by
commit 162d331d833d ("wifi: mac80211: bounds-check link_id in
ieee80211_ml_reconfiguration"). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Serialize UMP output teardown with event_input
seq_ump_process_event() borrows client->out_rfile.output without
synchronizing with the first-open and last-close transition in
seq_ump_client_open() and seq_ump_client_close().
The last output unuse can therefore drop opened[STR_OUT] to zero and
release the rawmidi file while an in-flight event_input callback is still
inside snd_rawmidi_kernel_write(). That leaves the rawmidi substream
runtime exposed to teardown before the write path has taken its own
buffer reference.
Add a per-client rwlock for the event_input-visible output file. Publish
a newly opened output file under the write side, and hold the read side
from the output lookup through snd_rawmidi_kernel_write(). The last
output close copies and clears the visible output file under the write
side, then drops the lock and releases the saved rawmidi file. Use
IRQ-safe rwlock guards because event_input can also be reached from
atomic sequencer delivery.
The buggy scenario involves two paths, with each column showing the
order within that path:
path A label: event_input path path B label: last unuse path
1. seq_ump_process_event() reads 1. seq_ump_client_close()
client->out_rfile.output. drops opened[STR_OUT] to zero.
2. snd_rawmidi_kernel_write1() 2. snd_rawmidi_kernel_release()
has not yet pinned runtime. closes the output file.
3. The writer continues using 3. close_substream() frees
the borrowed substream. substream->runtime.
This keeps the output substream and runtime alive for the full
event_input write while keeping rawmidi release outside the rwlock.
KASAN reproduced this as a slab-use-after-free in
snd_rawmidi_kernel_write1(), with allocation through
seq_ump_use()/snd_seq_port_connect() and free through
seq_ump_unuse()/snd_seq_port_disconnect().
Validation reproduced this kernel report:
KASAN slab-use-after-free in snd_rawmidi_kernel_write1+0x9d/0x400
RIP: 0033:0x7f5528af837f
Read of size 8
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x650 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x1a7/0x340 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
snd_rawmidi_kernel_write1+0x9d/0x400 (?:?)
__asan_load8+0x82/0xb0 (?:?)
update_stack_state+0x1ef/0x2d0 (?:?)
snd_rawmidi_kernel_write+0x1a/0x20 (?:?)
seq_ump_process_event+0xd4/0x120 (sound/core/seq/seq_ump_client.c:82)
__snd_seq_deliver_single_event+0x8a/0xe0 (?:?)
snd_seq_deliver_from_ump+0x2b2/0xd60 (?:?)
lock_acquire+0x14e/0x2e0 (?:?)
find_held_lock+0x31/0x90 (?:?)
snd_seq_port_use_ptr+0xa6/0xe0 (?:?)
__kasan_check_write+0x18/0x20 (?:?)
do_raw_read_unlock+0x32/0xa0 (?:?)
_raw_read_unlock+0x26/0x50 (?:?)
snd_seq_deliver_single_event+0x45c/0x4b0 (?:?)
snd_seq_deliver_event+0x10d/0x1b0 (?:?)
snd_seq_client_enqueue_event+0x192/0x240 (?:?)
snd_seq_write+0x2cd/0x450 (?:?)
apparmor_file_permission+0x20/0x30 (?:?)
security_file_permission+0x51/0x60 (?:?)
vfs_write+0x1ce/0x850 (?:?)
__fget_files+0x12b/0x220 (?:?)
lock_release+0xc8/0x2a0 (?:?)
__rcu_read_unlock+0x74/0x2d0 (?:?)
__fget_files+0x135/0x220 (?:?)
ksys_write+0x15a/0x180 (?:?)
rcu_is_watching+0x24/0x60 (?:?)
__x64_sys_write+0x46/0x60 (?:?)
x64_sys_call+0x7d/0x20d0 (?:?)
do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
