| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-ish-hid: ipc: Fix potential use-after-free in work function
When a reset notify IPC message is received, the ISR schedules a work
function and passes the ISHTP device to it via a global pointer
ishtp_dev. If ish_probe() fails, the devm-managed device resources
including ishtp_dev are freed, but the work is not cancelled, causing a
use-after-free when the work function tries to access ishtp_dev. Use
devm_work_autocancel() instead, so that the work is automatically
cancelled if probe fails. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: fix use-after-free on source server when doing inter-server copy
Use-after-free occurred when the laundromat tried to free expired
cpntf_state entry on the s2s_cp_stateids list after inter-server
copy completed. The sc_cp_list that the expired copy state was
inserted on was already freed.
When COPY completes, the Linux client normally sends LOCKU(lock_state x),
FREE_STATEID(lock_state x) and CLOSE(open_state y) to the source server.
The nfs4_put_stid call from nfsd4_free_stateid cleans up the copy state
from the s2s_cp_stateids list before freeing the lock state's stid.
However, sometimes the CLOSE was sent before the FREE_STATEID request.
When this happens, the nfsd4_close_open_stateid call from nfsd4_close
frees all lock states on its st_locks list without cleaning up the copy
state on the sc_cp_list list. When the time the FREE_STATEID arrives the
server returns BAD_STATEID since the lock state was freed. This causes
the use-after-free error to occur when the laundromat tries to free
the expired cpntf_state.
This patch adds a call to nfs4_free_cpntf_statelist in
nfsd4_close_open_stateid to clean up the copy state before calling
free_ol_stateid_reaplist to free the lock state's stid on the reaplist. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Fix use-after-free for dynamic ftrace_ops
KASAN reported a use-after-free with ftrace ops [1]. It was found from
vmcore that perf had registered two ops with the same content
successively, both dynamic. After unregistering the second ops, a
use-after-free occurred.
In ftrace_shutdown(), when the second ops is unregistered, the
FTRACE_UPDATE_CALLS command is not set because there is another enabled
ops with the same content. Also, both ops are dynamic and the ftrace
callback function is ftrace_ops_list_func, so the
FTRACE_UPDATE_TRACE_FUNC command will not be set. Eventually the value
of 'command' will be 0 and ftrace_shutdown() will skip the rcu
synchronization.
However, ftrace may be activated. When the ops is released, another CPU
may be accessing the ops. Add the missing synchronization to fix this
problem.
[1]
BUG: KASAN: use-after-free in __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline]
BUG: KASAN: use-after-free in ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049
Read of size 8 at addr ffff56551965bbc8 by task syz-executor.2/14468
CPU: 1 PID: 14468 Comm: syz-executor.2 Not tainted 5.10.0 #7
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x40c arch/arm64/kernel/stacktrace.c:132
show_stack+0x30/0x40 arch/arm64/kernel/stacktrace.c:196
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b4/0x248 lib/dump_stack.c:118
print_address_description.constprop.0+0x28/0x48c mm/kasan/report.c:387
__kasan_report mm/kasan/report.c:547 [inline]
kasan_report+0x118/0x210 mm/kasan/report.c:564
check_memory_region_inline mm/kasan/generic.c:187 [inline]
__asan_load8+0x98/0xc0 mm/kasan/generic.c:253
__ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline]
ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049
ftrace_graph_call+0x0/0x4
__might_sleep+0x8/0x100 include/linux/perf_event.h:1170
__might_fault mm/memory.c:5183 [inline]
__might_fault+0x58/0x70 mm/memory.c:5171
do_strncpy_from_user lib/strncpy_from_user.c:41 [inline]
strncpy_from_user+0x1f4/0x4b0 lib/strncpy_from_user.c:139
getname_flags+0xb0/0x31c fs/namei.c:149
getname+0x2c/0x40 fs/namei.c:209
[...]
Allocated by task 14445:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc mm/kasan/common.c:479 [inline]
__kasan_kmalloc.constprop.0+0x110/0x13c mm/kasan/common.c:449
kasan_kmalloc+0xc/0x14 mm/kasan/common.c:493
kmem_cache_alloc_trace+0x440/0x924 mm/slub.c:2950
kmalloc include/linux/slab.h:563 [inline]
kzalloc include/linux/slab.h:675 [inline]
perf_event_alloc.part.0+0xb4/0x1350 kernel/events/core.c:11230
perf_event_alloc kernel/events/core.c:11733 [inline]
__do_sys_perf_event_open kernel/events/core.c:11831 [inline]
__se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723
__arm64_sys_perf_event_open+0x6c/0x80 kernel/events/core.c:11723
[...]
Freed by task 14445:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:48
kasan_set_track+0x24/0x34 mm/kasan/common.c:56
kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:358
__kasan_slab_free.part.0+0x11c/0x1b0 mm/kasan/common.c:437
__kasan_slab_free mm/kasan/common.c:445 [inline]
kasan_slab_free+0x2c/0x40 mm/kasan/common.c:446
slab_free_hook mm/slub.c:1569 [inline]
slab_free_freelist_hook mm/slub.c:1608 [inline]
slab_free mm/slub.c:3179 [inline]
kfree+0x12c/0xc10 mm/slub.c:4176
perf_event_alloc.part.0+0xa0c/0x1350 kernel/events/core.c:11434
perf_event_alloc kernel/events/core.c:11733 [inline]
__do_sys_perf_event_open kernel/events/core.c:11831 [inline]
__se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723
[...] |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Security Center allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows DHCP Server allows an unauthorized attacker to execute code over a network. |
| Use after free in Windows DHCP Server allows an unauthorized attacker to execute code over a network. |
| Use-after-free vulnerability in VFS in Google gVisor prior to release 20260831.0 on all platforms allows a local attacker with standard container privileges to achieve code execution in the host sentry process by double-freeing the backing MemoryFile from an in-sandbox overlay filesystem. The sentry process remains confined by host-level Linux seccomp and namespace boundaries. |
| Progress MarkLogic Server 12.x releases before 12.1.0 and 11.x releases before 11.3.7 contain memory-safety defects in the JavaScript engine integration that could result in memory corruption, controlled process failure, or server instability. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_core_module module. When asynchronous file I/O (AIO) is enabled in certain configurations, processing a Server Side Includes (SSI) page containing “include virtual” commands may trigger a Use-After-Free (UAF) in the NGINX worker process. This may cause memory corruption or a worker process crash. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system, corrupt its memory, or possibly trigger code execution. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| cairo 1.16.0, in cairo_ft_apply_variations() in cairo-ft-font.c, would free memory using a free function incompatible with WebKit's fastMalloc, leading to an application crash with a "free(): invalid pointer" error. |
| Use after free in Kernel Mode Driver in Intel(R) Graphics Driver for Windows* before versions 10.18.x.5059 (aka 15.33.x.5059), 10.18.x.5057 (aka 15.36.x.5057), 20.19.x.5063 (aka 15.40.x.5063) 21.20.x.5064 (aka 15.45.x.5064) and 24.20.100.6373 may allow an unprivileged user to potentially enable a denial of service via local access. |
| Use after free in Windows Network Load Balancing allows an unauthorized attacker to execute code over a network. |
| Use after free in Microsoft Office Click-To-Run allows an authorized attacker to elevate privileges locally. |
| Use after free in Microsoft Office Click-To-Run allows an authorized attacker to elevate privileges locally. |
| Use after free in Microsoft Office PowerPoint allows an unauthorized attacker to execute code over a network. |
| Use after free in Microsoft Office PowerPoint allows an unauthorized attacker to execute code over a network. |
| A flaw was found in DPDK lib/vhost. The VDUSE handler fails to invalidate vring pointers when the IOTLB is invalidated, leading to use-after-unmap. |
| A security vulnerability has been detected in GPAC up to 26.07.0. The impacted element is the function gf_mx_v of the file utils/os_thread.c of the component MP4Box. Such manipulation leads to use after free. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: use rcu_assign_pointer() for __rcu list updates
Several places in net/ipv6/mcast.c update RCU-protected lists
(np->ipv6_mc_list, idev->mc_list, idev->mc_tomb) using direct pointer
assignments instead of rcu_assign_pointer():
1. In __ipv6_dev_mc_dec(), unlinking a group from idev->mc_list did:
*map = ma->next;
without rcu_assign_pointer() while concurrent readers traverse
idev->mc_list locklessly under rcu_read_lock().
2. In ipv6_sock_mc_drop() and __ipv6_sock_mc_close(), unlinking a group
from np->ipv6_mc_list directly assigned *lnk = mc_lst->next and
np->ipv6_mc_list = mc_lst->next without rcu_assign_pointer(), racing
with lockless readers in inet6_mc_check().
3. In __ipv6_sock_mc_join(), mc_lst->next was initialized to
np->ipv6_mc_list via raw assignment before publishing mc_lst.
4. In mld_del_delrec() and __ipv6_dev_mc_inc(), __rcu source pointers
passed into rcu_assign_pointer() lacked explicit dereference helpers.
Fix these by consistently using rcu_assign_pointer() along with
mc_dereference() / sock_dereference(). |
