Export limit exceeded: 417100 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (107563 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74412 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix wrong pci_get_drvdata type in AER handlers rtw88 stores an ieee80211_hw pointer via pci_set_drvdata() at probe time, but io_error_detected() and io_resume() retrieve it as a net_device pointer. This causes netif_device_detach/attach to operate on an ieee80211_hw struct, reading and writing at wrong offsets. Use ieee80211_stop_queues/wake_queues instead, consistent with every other queue stop/start path in the driver. | ||||
| CVE-2026-74411 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: Correct data type for scan index to avoid infinite loop A kernel soft lockup was observed during Wi-Fi scanning on the 6GHz band. The CPU becomes stuck in rtw89_hw_scan_add_chan_ax for over 20 seconds, leading to a system panic. RIP points to 0f b6 c3 (movzbl %bl, %eax), which zero-extends the low 8 bits of RBX into RAX. RBX (the counter i) has reached a huge value: 0x137466a1. watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [kworker/u16:4:6124] Workqueue: events_unbound cfg80211_wiphy_work [cfg80211] RIP: 0010:rtw89_hw_scan_add_chan_ax+0xb3/0x6e0 [rtw89_core] Code: a0 48 89 45 a8 44 89 6d 9c 44 89 75 98 eb 29 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 c3 01 <0f> b6 c3 41 3b 44 24 74 0f 83 0b 02 00 00 0f b6 c3 48 8d 14 80 49 RSP: 0018:ffffcb48cbaa39f8 EFLAGS: 00000202 RAX: 0000000000000005 RBX: 00000000137466a1 RCX: 0000000000000000 RDX: ffff89ffc9d851a8 RSI: 0000000000004f0d RDI: 0000000096af0130 RBP: ffffcb48cbaa3a60 R08: 0000000000000000 R09: ffff8a00b7502080 R10: ffff8a00b75ff600 R11: 0000000000000000 R12: ffff89ffc7553870 R13: ffff8a00b7ac8f19 R14: ffff8a00b75020d8 R15: ffff89ffc3d54d80 FS: 0000000000000000(0000) GS:ffff8a014f962000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007558d7f9f4c4 CR3: 0000000178040001 CR4: 00000000001706f0 Call Trace: <TASK> rtw89_hw_scan_prep_chan_list_ax+0x8a/0x400 [rtw89_core] rtw89_hw_scan_start+0x546/0x8a0 [rtw89_core] ? rtw89_fw_h2c_default_cmac_tbl+0x13c/0x1f0 [rtw89_core] rtw89_ops_hw_scan+0xae/0x120 [rtw89_core] drv_hw_scan+0xbb/0x180 [mac80211] __ieee80211_start_scan+0x2fc/0x750 [mac80211] ieee80211_request_scan+0xe/0x20 [mac80211] ieee80211_scan+0x123/0x190 [mac80211] rdev_scan+0x40/0x110 [cfg80211] cfg80211_scan_6ghz+0x5a1/0xa30 [cfg80211] By objdump with source: for (i = 0; i < req->n_6ghz_params; i++) { 5fbc0: 83 c3 01 add $0x1,%ebx --> i++ 5fbc3: 0f b6 c3 movzbl %bl,%eax --> get counter fbc6: 41 3b 44 24 74 cmp 0x74(%r12),%eax * RBX: 00000000137466a1 -> %bl = a1 -> EAX = 000000a1 (161) | ||||
| CVE-2026-74410 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix OOB read from firmware RX descriptor exceeding DMA buffer In rtw_pci_rx_napi(), new_len is computed as the sum of pkt_len (14-bit descriptor field, max 16383) and pkt_offset (drv_info_sz + shift, both firmware-controlled). The result can exceed RTK_PCI_RX_BUF_SIZE (11478), causing an out-of-bounds read from the pre-allocated DMA buffer when skb_put_data copies new_len bytes. The USB transport already validates this (rtw_usb_rx_data_put checks against RTW_USB_MAX_RECVBUF_SZ); the PCIe path does not. Add a check that new_len does not exceed the DMA buffer size. | ||||
| CVE-2026-74409 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: add bounds check on firmware mac_id in link lookup The mac_id field in RX descriptors is 8 bits wide (0-255), but assoc_link_on_macid[] has only RTW89_MAX_MAC_ID_NUM (128) entries. While the driver currently assigns mac_id values below 128, the descriptor value comes from firmware and is not validated before use as an array index. Add a defensive bounds check in rtw89_assoc_link_rcu_dereference() to guard against out-of-range firmware values. | ||||
| CVE-2026-74408 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: fix OOB access from firmware tx status queue ID ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a 4-bit hardware field (0-15), but the txq array only has ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array access. Add a bounds check on ts.qid before using it as an array index. | ||||
| CVE-2026-74404 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix snp_filter_reserved_mem_regions() off-by-one Sashiko notes: > regarding the bounds check in snp_filter_reserved_mem_regions() > called via walk_iomem_res_desc(): does the check > if ((range_list->num_elements * 16 + 8) > PAGE_SIZE) > allow an off-by-one heap buffer overflow? > > If range_list->num_elements is 255, 255 * 16 + 8 = 4088, which is <= 4096. > Writing range->base (8 bytes) fills 4088-4095, but writing range->page_count > (4 bytes) would write to 4096-4099, overflowing the kzalloc-allocated > PAGE_SIZE buffer. Fix this by accounting for the entry about to be written to, in addition to the entries that are already allocated. | ||||
| CVE-2026-74397 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/mlx5: Fix transport-domain rollback and initialize lb mutex earlier mlx5_ib_alloc_transport_domain() allocates a transport domain and then may fail in mlx5_ib_enable_lb(). In that case, the allocated TD is leaked. Fix this by deallocating the TD when mlx5_ib_enable_lb() returns an error. Also return 0 explicitly in the no-loopback-capability success branch, and move dev->lb.mutex initialization to mlx5_ib_stage_init_init(). | ||||
| CVE-2026-74396 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix UMR XLT cleanup on ODP populate failure mlx5r_umr_update_xlt() allocates and DMA maps an XLT buffer with mlx5r_umr_create_xlt(). The buffer is released by the common cleanup path through mlx5r_umr_unmap_free_xlt(). After mlx5_odp_populate_xlt() became fallible, its error path returned directly and skipped that cleanup. This leaks the XLT DMA mapping and buffer. If the emergency XLT page was used, it also leaves xlt_emergency_page_mutex locked. Break out of the loop so execution falls through the existing cleanup path. | ||||
| CVE-2026-74390 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix out-of-bounds write in irdma_copy_user_pgaddrs The irdma_copy_user_pgaddrs function loops through all of the umem DMA blocks to populate the PBLEs and will stop when either the last DMA block is reached or palloc->total_cnt is reached. The issue is that the logic for checking palloc->total_cnt would only work for non-zero values. When irdma_setup_pbles is called with lvl==0, it calls irdma_copy_user_pgaddrs with palloc->total_cnt==0, which means the only way to break out of the loop is to reach the last umem DMA block, which means it could end up going beyond the fixed size of 4 iwmr->pgaddrmem array that is used in the lvl==0 case. In the case of QP/CQ/SRQ rings, the value of lvl is determined by a separate input (for example, req.cq_pages in the case of a CQ). So, we must perform explicit checking to ensure we don't overflow the pgaddrmem array if the user provides a umem that consists of more blocks than their provided req.cq_pages. | ||||
| CVE-2026-111642 | 1 Fastapiadmin | 1 Fastapiadmin | 2026-10-16 | 8.8 High |
| FastapiAdmin through 3.0 contains a hard-coded JWT signing secret in backend/app/config/setting.py that allows low-privileged users to forge tokens impersonating the superuser. Attackers can register via the unauthenticated /api/v1/system/user/register endpoint, log in, and forge an HS256 token keeping their session_id but naming the superuser in user_name to gain superuser privileges. | ||||
| CVE-2026-111279 | 1 Dragonflydb | 1 Dragonfly | 2026-10-16 | 7.5 High |
| Dragonfly through 2.0.2 contains an unbounded memory allocation vulnerability that allows unauthenticated clients to exhaust memory by passing a negative COUNT to HRANDFIELD, ZRANDMEMBER or SRANDMEMBER. Attackers can send a single command against a one-element key with a huge negative COUNT to trigger the OOM killer, terminating the instance for all clients. | ||||
| CVE-2026-107794 | 1 Perl | 1 Extutils::typemaps::stl::list | 2026-10-16 | 7.5 High |
| ExtUtils::Typemaps::STL::List versions before 1.07 for Perl allocate a 32 GiB array on an empty list. The OUTPUT typemaps call av_extend( av, len-1 ). On an empty list, this undeflows, and av_extend will allocate an array with 2^32 slots, leading to memory exhaustion. Note that a similar issue was fixed in ExtUtils::Typemaps::STL::Vector version 1.05. | ||||
| CVE-2025-71433 | 1 Usekaneo | 1 Kaneo | 2026-10-16 | 7.5 High |
| Kaneo before 2.1.6 contains a missing authorization vulnerability that allows authenticated users to access other workspaces by supplying project, task, label or workspace identifiers to API routes lacking membership checks. Attackers who obtain identifiers, for example from shared project links, can read projects and tasks, modify or delete tasks, labels and comments, and search workspace contents. | ||||
| CVE-2026-110135 | 2026-10-16 | 7.4 High | ||
| The OTP Login & Register Woocommerce WordPress plugin before 2.7.3 does not adequately limit one-time-password verification attempts, because the attempt limit is tracked against a value the client itself supplies and can change freely, allowing an unauthenticated attacker to bypass the limit and brute-force the short numeric login code to take over an account without its password. | ||||
| CVE-2026-97003 | 1 Microsoft | 14 365 Apps, Microsoft 365, Microsoft 365 Apps For Enterprise and 11 more | 2026-10-16 | 8.8 High |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-111357 | 1 Ivanti | 1 Connect Secure | 2026-10-16 | 7 High |
| Ivanti Connect Secure 22.8R2.4 mishandles the manner in which the dsinvoked broker trusts DSCache configuration data, leading to privilege escalation to root, as exploited in the wild in October 2026. | ||||
| CVE-2026-97012 | 1 Microsoft | 6 365 Apps, Microsoft 365 Apps For Enterprise, Microsoft Office Ltsc 2021 and 3 more | 2026-10-16 | 8.8 High |
| Stack-based buffer overflow in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-97017 | 1 Microsoft | 12 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 9 more | 2026-10-16 | 8.8 High |
| Use after free in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-97769 | 1 Microsoft | 12 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 9 more | 2026-10-16 | 8.8 High |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-97010 | 1 Microsoft | 14 365 Apps, Microsoft 365, Microsoft 365 Apps For Enterprise and 11 more | 2026-10-16 | 8.8 High |
| Use after free in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. | ||||