| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fq_pie: clamp default quantum to avoid signed overflow
fq_pie_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) without
clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0
accepting MTU 2147483634) makes psched_mtu() return 0x80000000, which
overflows the signed flow->deficit to INT_MIN in fq_pie_qdisc_dequeue(),
causing an infinite loop and soft lockup. Emulate fq_pie_policy which
is already bounded to [1, 1 << 20]; clamp the default to [256, 1 << 20].
256 matches fq_codel's floor and is a sane minimum for a DRR quantum.
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy
device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix a resource leak in copy_net_ns() error handling path
Currently, preinit_net() does two things:
(1) call ns_common_init() which might fail
(2) initialize resources which does not fail
However, preinit_net() is returning early when (1) fails, and copy_net_ns()
is jumping to the dec_ucounts: label. As a result, resources allocated by
net_alloc() are leaking. We need to call key_remove_domain() and
net_passive_dec() in order to release resources allocated by net_alloc().
We cannot simply jump to the put_userns: label when preinit_net() failed,
for (2) is not yet done. But we can reorder (1) and (2), for there is no
dependency between (1) and (2). Therefore, this patch decouples (1) from
preinit_net() and changes preinit_net() back to a void function, and calls
ns_common_init() after preinit_net() succeeded. Then, we can jump to
immediately after ns_common_free() of the put_userns: label. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: process: Fix context switching MTE store-only tag check
SCTLR_EL1.TCSO0 is set when user opt-in for MTE store-only tag check
mode. However, it is not part of SCTLR_USER_MASK which imply that on
context switch we never clear SCTLR_EL1.TCSO0, so we are leaking that
setting into another task.
Fix that by including SCTLR_EL1_TCSO0_MASK into SCTLR_USER_MASK |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: netc: fix period truncation and potential divide-by-zero in PEROUT
The max_period bound in net_timer_enable_perout() was computed as:
max_period = (u64)NETC_TMR_DEFAULT_FIPER + integral_period;
which exceeds U32_MAX when integral_period > 0 (e.g. 0x100000002 for
the default 333333333 Hz clock). A period_ns that passes this check but
exceeds U32_MAX is then silently truncated when stored into the u32
struct netc_pp::period field.
A truncated value of zero can reach netc_timer_set_perout_alarm(), where
the local u32 period variable would also be 0, causing a divide-by-zero
in roundup_u64(delta, period) whenever the stime < min_time branch is
taken (which always happens for a start time of {0, 0}).
Additionally, netc_timer_enable_periodic_pulse() and
netc_timer_enable_fiper() both compute:
fiper = pp->period - integral_period;
A zero pp->period results in an unsigned wraparound to 0xFFFFFFFD,
mis-programming the FIPER hardware register.
Fix all three issues by capping max_period at NETC_TMR_DEFAULT_FIPER
(0xFFFFFFFF). This ensures that any period_ns passing the range check
fits in a u32 without truncation, so the stored value is always valid
and non-zero. The accepted range is reduced by integral_period ns
(typically only a few nanoseconds), which is negligible in practice. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4/pnfs: key the data server cache on the NFS version
nfs4_pnfs_ds_add() keys the per-net data server cache on the multipath
address set alone, and struct nfs4_pnfs_ds records no version. That
suffices for the files layout driver, which always connects with version
4, but flexfiles takes its version tuple from GETDEVICEINFO per device,
and one address can legitimately serve both NFSv3 and NFSv4.
Two deviceids on one address with different ds_versions[0].version
therefore share a single nfs4_pnfs_ds, and whichever mirror connects
first pins ds_clp to its own version. The other one is handed that
client anyway, so it selects rpc_call_ops for a version the connection
does not speak, and the mismatched sequence-slot handling dereferences
NULL.
Add the version to the cache key so the two cannot alias, giving each
version its own nfs4_pnfs_ds and connection while both mirrors stay
usable. Only the major version is compared, since that is what selects
rpc_call_ops and rpc_ops; v4.0 and v4.1 keep sharing a client. The files
layout driver passes the 4 it already hardcodes at connect time. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: free stashed qentry before overwrite in REQ_ADD_LINK to ADD_LINK transition
When smc_llc_event_handler() transitions the local LLC flow from
SMC_LLC_FLOW_REQ_ADD_LINK to SMC_LLC_FLOW_ADD_LINK on arrival of an ADD_LINK
request, it calls smc_llc_flow_qentry_set() unconditionally:
if (lgr->llc_flow_lcl.type == SMC_LLC_FLOW_REQ_ADD_LINK) {
lgr->llc_flow_lcl.type = SMC_LLC_FLOW_ADD_LINK;
smc_llc_flow_qentry_set(&lgr->llc_flow_lcl, qentry);
...
}
A CONFIRM_LINK or ADD_LINK_CONT arriving while flow->type is
SMC_LLC_FLOW_REQ_ADD_LINK is stashed into flow->qentry via the
SMC_LLC_CONFIRM_LINK / SMC_LLC_ADD_LINK_CONT handler (which stores into
flow->qentry for any non-NONE flow type). When the subsequent ADD_LINK
arrives, the REQ_ADD_LINK branch overwrites flow->qentry with the new pointer
without first freeing the stashed allocation, leaking one kmalloc object.
The stashed entry has no consumer: smc_llc_wait() is only called from
llc_add_link_work, which is not yet scheduled while the flow type remains
REQ_ADD_LINK. No waiter is sleeping on llc_msg_waiter at this point.
It is safe to unconditionally free any stashed qentry before
the overwrite.
Call smc_llc_flow_qentry_del() before smc_llc_flow_qentry_set() in the
REQ_ADD_LINK branch. smc_llc_flow_qentry_del() already checks flow->qentry
before freeing, so the normal path where no entry is stashed is a no-op. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: fix wrong list iterated in add_direct_chain error path
In add_direct_chain(), newly allocated direct MR entries are added to
the local list 'tmp', which is spliced into mr->head only on success.
On the error path, the cleanup loop was incorrectly iterating over
mr->head instead of tmp.
Fix by iterating over 'tmp' in the err_alloc cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: check for NULL root inode in fuse_fill_super_submount
fuse_iget() can return NULL when its inode allocation fails, but
fuse_fill_super_submount() passed the result straight to get_fuse_inode()
and decremented fi->nlookup without checking it:
root = fuse_iget(sb, parent_fi->nodeid, ...);
fi = get_fuse_inode(root);
fi->nlookup--;
Inside fuse_iget() the inode allocation can fail and return NULL. The
submount root takes the iget5_locked() path, whose alloc_inode() can fail
under memory pressure (the auto-submount branch can fail the same way in
new_inode() or fuse_alloc_submount_lookup()):
inode = iget5_locked(sb, nodeid, fuse_inode_eq, fuse_inode_set,
&nodeid);
if (!inode)
return NULL;
A NULL root makes get_fuse_inode() a container_of() on NULL and the
nlookup decrement a write to a bogus address, oopsing the mount. With
CONFIG_KASAN the following null pointer dereference is reported when the
root inode allocation of an auto-submount fails (e.g. under memory
pressure):
==================================================================
BUG: KASAN: null-ptr-deref in fuse_get_tree_submount+0x656/0x8b0
Read of size 8 at addr 00000000000002b0 by task ls/942
CPU: 0 PID: 942 Comm: ls Tainted: G W 6.6 #15
Call Trace:
<TASK>
fuse_get_tree_submount+0x656/0x8b0
vfs_get_tree+0x48/0x140
fc_mount+0x13/0x50
fuse_dentry_automount+0x7a/0xb0
__traverse_mounts+0xca/0x330
step_into+0x339/0xac0
path_lookupat+0xc5/0x2f0
filename_lookup+0x163/0x2a0
vfs_statx+0xd5/0x200
do_statx+0x83/0xd0
__x64_sys_statx+0xa0/0xc0
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x78/0xe2
</TASK>
==================================================================
Return -ENOMEM instead; the caller tears down the partially built
superblock on error, matching the other error returns in this
function. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/bpf: Replace ly instruction with llgf
cpu_nr is a 32 bit value and BPF_REG_0 is a 64 bit register, when ly loads
the cpu_nr into BPF_REG_0 it does not zero the upper bits, but llgf does. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix off-by-one page overflow in ntfs_decompress()
The per-token range check in ntfs_decompress() uses
if (cb >= cb_sb_end || dp_addr > dp_sb_end)
break;
so dp_addr == dp_sb_end falls through to the symbol copy
`*dp_addr++ = *cb++`, writing one byte past the destination page. Since
NTFS_SB_SIZE == PAGE_SIZE the destination is a single page, so the byte
lands in the adjacent page, and *dest_ofs is left one past the sub-block
end (the later `*dest_ofs &= ~PAGE_MASK` then yields 1, not 0, so the page
is never finalized and later sub-blocks keep writing further past it). A
corrupted compressed $DATA attribute thus produces a bounded run of
out-of-bounds writes when the file is read.
Break as soon as dp_addr reaches dp_sb_end; a full sub-block still
completes, as its final copy advances dp_addr to exactly dp_sb_end. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: visconti: Make sure clk_init_data is fully initialized
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
visconti_clk_register_gate() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter in uninitialized, and
thus may cause a crash.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: pcf8563: fix clock provider leak on unbind
pcf8563_clkout_register_clk() registers the CLKOUT clock provider with
of_clk_add_provider(), but nothing ever unwinds it: there is no
of_clk_del_provider() call and the driver has no remove callback. Each
of_clk_add_provider() allocates a struct of_clk_provider, takes a
reference on the OF node and adds an entry to the global of_clk_providers
list, none of which is released when the device is unbound. Every
bind/unbind (or module reload) therefore leaks a provider structure and
an of_node reference.
The clock itself is already device-managed (devm_clk_register()); only
the provider registration was not. Use devm_of_clk_add_hw_provider() so
the provider is removed automatically on unbind. Tie it to the parent
i2c device, whose OF node carries the #clock-cells and clock-output-names
properties (the RTC class device has no OF node of its own). |
| In the Linux kernel, the following vulnerability has been resolved:
hinic3: Fix skb linearization mismatch and drop skb when skb_checksum_help() failed
Previously, hinic3_send_one_skb() cached the skb fragment count before
calling hinic3_tx_offload(). If hinic3_tx_csum() falls back to
skb_checksum_help() for unsupported tunnel packets, the skb may be
linearized. Continuing to build the TX descriptor with the stale
fragment count leads to a descriptor mismatch, which can trigger
out-of-bounds DMA reads or IOMMU faults.
Furthermore, the old code ignored the return value of skb_checksum_help(),
transmitting corrupted packets with incomplete checksums upon failure.
Fix this by:
1. Moving the hinic3_tx_offload() call before calculating 'num_sge' to
ensure the correct fragment count is used if the SKB is linearized.
2. Propagating skb_checksum_help() errors and returning
HINIC3_TX_OFFLOAD_INVALID to properly drop the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
net: page_pool: fix UAF in __page_pool_release_netmem_dma on xa_cmpxchg race
This bug was discovered while testing the hns3 driver under channel
reconfiguration (`ethtool -L` / `ethtool -G`) with iperf3 traffic on
arm64. The race is intermittently triggered when page_pool_destroy()
runs page_pool_scrub() concurrently with page return via
page_pool_put_netmem() on a different CPU. A WARN in
page_pool_clear_pp_info() surfaced the dangling DMA index bits left
by the cmpxchg loser, which led to the investigation.
page_pool_scrub() iterates pool->dma_mapped via xa_for_each() with no
page ref held. __page_pool_release_netmem_dma() currently reads and
writes netmem fields (dma_addr, DMA index bits in pp_magic) after
xa_cmpxchg() returns. The unref path calls put_page() unconditionally
regardless of the cmpxchg outcome; when it loses the cmpxchg, it still
frees the page before the scrub winner finishes these netmem accesses,
so scrub touches a freed page -- a Use-After-Free.
Fix this by splitting the DMA release into two functions:
1. __page_pool_unmap_netmem_dma() caches dma_addr before xa_cmpxchg(),
does the cmpxchg to remove the DMA mapping, and calls dma_unmap on
the cached address. It never touches netmem fields after the cmpxchg,
making it safe for the scrub path which holds no page ref.
2. __page_pool_release_netmem_dma() wraps the above and additionally
clears dma_addr and DMA index bits in netmem fields. This is safe
only when the caller holds a page ref, so it is used by the return
path (page_pool_return_netmem).
The scrub path calls __page_pool_unmap_netmem_dma() directly; the return
path calls __page_pool_release_netmem_dma(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix UAF in bpf_trampoline_multi_attach_free on update failure
When bpf_trampoline_update() fails before modify_fentry_multi()/
unregister_fentry_multi() is called, cur_image is unchanged
(cur_image == old_image) and ftrace still calls into it. Freeing
old_image in that case causes a UAF.
Only free old_image when it differs from cur_image. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: fix NULL deref in NIX TM tree debugfs read path
rvu_dbg_nix_tm_tree_display() dereferences pfvf->sq_ctx without
checking whether the SQ context has been allocated. Reading
/sys/kernel/debug/octeontx2/nix/tm_tree for a NIX LF whose transmit
queues are not set up triggers a kernel oops.
Guard the read path the same way rvu_dbg_nix_tm_tree_write() already
does and return -EINVAL with a seq_file message when sq_ctx is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: Validate MTU in rfcomm_apply_pn() to prevent infinite loop
rfcomm_apply_pn() accepts the MTU value from a remote PN (Parameter
Negotiation) frame without checking for zero. When the remote peer
sends an MTU of zero, d->mtu is set to 0. This causes the sendmsg
path to enter an infinite loop when fragmenting data, as each fragment
has size == min_t(size_t, len, 0) == 0, so the remaining length never
decreases. The infinite allocation of zero-length skbs exhausts all
system memory.
Fix by clamping d->mtu to RFCOMM_DEFAULT_MTU when the negotiated
value is zero, consistent with the initial value assigned in
rfcomm_dlc_alloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Validate the FW dump header length
nxp_process_fw_dump() pulls the ACL header off the frame and then reads
seq_num and buf_len from a struct nxp_fw_dump_hdr placed at skb->data,
without checking that the ACL payload is long enough to contain it.
h4_recv_buf() collects HCI_ACL_HDR_SIZE bytes of header followed by the
number of payload bytes named in that header, so skb->len is 4 + dlen
with dlen supplied by the controller and possibly smaller than the 8
byte dump header, or zero. A short frame with connection handle 0xfff
therefore reads both fields from beyond the received data.
Beyond the read itself, buf_len is what terminates a dump: a value of
zero makes the driver call hci_devcd_complete() and reset the
controller, so a truncated frame can end a dump early.
Use skb_pull_data() to validate and pull the FW dump header before
accessing its fields. Warn and reject the chunk if the header is
truncated. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtksdio: Fix out-of-bounds DMA read in the TX path
btmtksdio_tx_packet() rounds the transfer size up to the SDIO block size
of 256 bytes, but hands the host controller the SKB buffer as is:
err = sdio_writesb(bdev->func, MTK_REG_CTDR, skb->data,
round_up(skb->len, MTK_SDIO_BLOCK_SIZE));
Only skb->len bytes hold packet data, so the controller reads up to 255
bytes of uninitialised memory and sends it to the device over the SDIO
bus. Depending on how much tailroom slack the SKB allocation happens to
carry, that read can also extend past the end of the buffer.
Compute the padded length up front, ensure the SKB has tailroom for it,
and zero-fill the padding with skb_put_zero(). skb->len then covers the
padding, so sdio_writesb() no longer needs to round up. byte_tx keeps
counting the header and the payload only, and the error path restores the
SKB so that the caller can requeue it.
Writing behind skb->tail is only safe because the driver owns the buffer,
which "Bluetooth: btmtksdio: Take exclusive ownership of the SKB before
TX" ensures. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check load-acquire src ptr type before the load
check_atomic_load() calls check_load_mem() before atomic_ptr_type_ok().
For a load-acquire that fetches into its own source register (dst_reg ==
src_reg), check_load_mem() overwrites src_reg's type with the type of the
loaded value, so the subsequent atomic_ptr_type_ok() no longer sees the
source pointer and fails to reject the disallowed types (ctx, pkt,
flow_keys, sock).
Since bpf_convert_ctx_accesses() does not rewrite atomic loads, the raw
access to the underlying kernel object is left in place. The destination
type is taken from the ctx access itself, so a load-acquire of the sk
field of struct __sk_buff for example leaves the register typed as
PTR_TO_SOCK_COMMON_OR_NULL, which type_is_sk_pointer() does not match
either, while it actually holds unconverted struct sk_buff bytes. Once
the NULL check has passed this is a type confusion, not just a leak of
kernel data.
Validate src_reg with check_reg_arg() and check the source pointer type
with atomic_ptr_type_ok() before the load again, mirroring
check_atomic_rmw(). Out-of-range register numbers are already rejected
earlier by check_and_resolve_insns() (commit 503d21ef8eac ("bpf: Do
register range validation early")), and the only exemption there,
is_stack_arg_ldx(), requires BPF_LDX | BPF_MEM | BPF_DW and thus never
matches a BPF_ATOMIC insn. atomic_ptr_type_ok() can therefore not
dereference register state out of bounds, that is, the out-of-bounds
read addressed by the Fixes commit below does not reappear (as proven
also via selftest). |
