Export limit exceeded: 417100 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (107563 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89586 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: fix DSM TRIM for sector sizes larger than 2048 bytes ata_scsi_write_same_xlat() translates a SCSI WRITE SAME command with the UNMAP bit set into an ATA DATA SET MANAGEMENT TRIM command. The TRIM descriptor is built by ata_format_dsm_trim_descr() into the 2048-byte ata_scsi_rbuf staging buffer, and the number of bytes copied is compared against the logical sector size by the caller: size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block); if (size != len) /* len == sdp->sector_size */ goto invalid_param_len; ata_format_dsm_trim_descr() clamps the copy length to ATA_SCSI_RBUF_SIZE (2048). On a device whose logical sector size exceeds that (e.g. a 4Kn device, where sector_size == 4096) the function can never return more than 2048, while the caller expects it to return sector_size. The comparison therefore always fails, so every TRIM is rejected with "Parameter list length error" and WARN_ON() splats on each attempt. TRIM / discard is thus completely broken on such devices. The descriptor was incorrectly sized from the logical sector size. A DSM TRIM payload is a list of 512-byte pages, each holding up to ATA_MAX_TRIM_RNUM (64) LBA Range Entries, and is independent of the logical sector size. The Block Limits VPD page already advertises a single such page as the maximum WRITE SAME length (65535 * ATA_MAX_TRIM_RNUM logical blocks), so the block layer never sends a request that needs more than one page. Emit exactly one 512-byte page, independent of the logical sector size, and transfer only that page (COUNT == 1). For a 512-byte-sector device this is unchanged; devices with larger logical sectors now work instead of failing every TRIM. | ||||
| CVE-2026-89573 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm array: reject an array block whose value size is not the caller's array_block_check() can only compare the header against itself, so a block with value_size 4 and max_entries 1018 is internally consistent and passes. dm-cache keeps two arrays -- mappings at 8 bytes and hints at 4 -- and the roots for both live in the superblock. Point the mappings root at a hint block and __load_mappings() walks it through an info whose value size is 8, so element_at() strides 8 bytes over 4-byte entries and reaches offset 8160 of a 4096-byte block. get_ablock() and __shadow_ablock() are the two places that hold the block and the caller at once. Reject there when the two value sizes disagree. Arrays only ever read their own blocks, so this fires on crafted metadata only. | ||||
| CVE-2026-89569 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: serialize security confirmation handling rfcomm_security_cfm() looks up a session on session_list and then walks its DLC list without holding rfcomm_mutex. Since RFCOMM session teardown uses rfcomm_mutex, krfcommd can close and free the same session and DLCs concurrently: hci_rx_work krfcommd ----------- --------- rfcomm_session_get() rfcomm_lock() rfcomm_session_close() rfcomm_dlc_unlink() rfcomm_session_del() kfree(s) rfcomm_unlock() walk s->dlcs The callback can then read a freed session list head and touch freed DLCs while updating their flags or timers. Serialize the session lookup and DLC traversal in rfcomm_security_cfm() with rfcomm_mutex. This matches the existing RFCOMM session lifetime rules and prevents concurrent rfcomm_session_del() / rfcomm_dlc_unlink() from tearing the objects down while the callback is using them. KASAN reported: BUG: KASAN: slab-use-after-free in rfcomm_security_cfm+0x41c/0x440 Read of size 8 at addr ffff888111fb3960 by task kworker/u17:1/89 Workqueue: hci0 hci_rx_work Call Trace: rfcomm_security_cfm+0x41c/0x440 hci_encrypt_cfm+0x139/0x590 hci_encrypt_change_evt+0x37b/0xc40 hci_event_packet+0x71b/0xb20 hci_rx_work+0x293/0x730 Allocated by task 69: rfcomm_session_add+0x9e/0x2f0 rfcomm_run+0x44b/0x41e0 Freed by task 69: kfree+0x131/0x3c0 rfcomm_session_del+0x188/0x220 rfcomm_run+0x1985/0x41e0 | ||||
| CVE-2026-89563 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: use skb_cow_head() in ip6_tnl_xmit() ip6_tnl_xmit() may need to expand headroom before it can push the outer IPv6 and optional encap headers. It currently does that with skb_realloc_headroom(), copies skb->sk ownership, consumes the original skb, and then continues processing with the replacement skb kept only in its local variable. That is safe only if the helper cannot fail afterwards. But this helper still has post-reallocation error exits. collect_md tunnels reject non-NONE encap after the replacement, and ip6_tnl_encap() can also fail later. In those cases the helper returns an error to its callers while the caller still only has the original skb pointer. Both ip6_tnl_start_xmit() and the IPv6 GRE paths free the caller skb on error, so they can end up freeing an skb that ip6_tnl_xmit() already consumed. Use skb_cow_head() instead. It provides the required headroom and writability without privately replacing the caller-owned skb, so later error returns cannot leave callers with a stale pointer. The Ethernet users, ip6gretap and ip6erspan, clear IFF_TX_SKB_SHARING and already call skb_cow_head() before entering ip6_tnl_xmit(). They do not rely on the removed skb_shared() reallocation. This also makes the IPv6 tunnel path consistent with ip_tunnel_xmit(). | ||||
| CVE-2026-89559 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: libnvdimm/labels: Prevent integer overflow in __nd_label_validate() The on-media namespace index field nslot is a u32 read from the DIMM label storage area. __nd_label_validate() bounds it against the config area size, but sizeof_namespace_label() returns unsigned, so the product nslot * label_size is evaluated in 32-bit and wraps modulo 2^32 before the comparison. A crafted nslot passes the bound and is then used as the loop trip count in nd_label_data_init(), whose memset() walks off the end of the config_size buffer: an out-of-bounds write. The field is not trusted -- it comes from the medium, or from userspace via ND_CMD_SET_CONFIG_DATA. Evaluate the product in 64-bit so the bound check is exact; conforming labels are unaffected. The check was safe when introduced by commit 4a826c83db4e ("libnvdimm: namespace indices: read and validate"): it multiplied by sizeof(struct nd_namespace_label), a size_t, so on a 64-bit build the product did not wrap. Commit 564e871aa66f ("libnvdimm, label: add v1.2 nvdimm label definitions") narrowed it to 32 bits when the label size became a runtime value read via sizeof_namespace_label(). | ||||
| CVE-2026-89557 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: md: do overflow check for sb->bblog_shift in super_1_load() In super_1_load(), sb->bblog_shift is an __u8 type value loaded from on- disk superblock. It is used for badblocks API badblocks_set() by the following sequence, 1930 rdev->badblocks.shift = sb->bblog_shift; 1931 for (i = 0 ; i < (sectors << (9-3)) ; i++, bbp++) { 1932 u64 bb = le64_to_cpu(*bbp); 1933 int count = bb & (0x3ff); 1934 u64 sector = bb >> 10; 1935 sector <<= sb->bblog_shift; 1936 count <<= sb->bblog_shift; 1937 if (bb + 1 == 0) 1938 break; 1939 if (!badblocks_set(&rdev->badblocks, sector, count, 1)) 1940 return -EINVAL; 1941 } bb->bblog_shit is in range of 0-255, variable sector is 64bit width, for an invalid bb->bblog_shit, it is possible to make sector be overflowed by the following calculation, 1935 sector <<= sb->bblog_shift; Then in turn when call badblocks_set() at line 1939 with the invalid rdev->badblocks.shift set at line 1930, may result an overflow inside _badblocks_clear() in block/badblocks.c. Although there are many places to call badblocks APIs, the non-zero shift value is only used in super_1_load(), other places always use 0 as the shift value. Therefore it is unnecessary to do a general shift value overflow check inside badblock API, and just check here as the caller. This may avoid unnecessary check, make the badblocks API code more simple and elegant. | ||||
| CVE-2026-89554 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix uninitialized local_id in syncookie MP_JOIN reconstruction mptcp_token_join_cookie_init_state() restores remote_nonce, local_nonce, backup, join_id, token and msk from the saved cookie entry when rebuilding the request socket for a MP_JOIN 4th-ACK handled under SYN cookies, but it does not restore local_id, even though the SYN path saved it. subflow_ulp_clone() then reads that uninitialized field and stores it as the joined subflow's address-ID. Because the request-sock slab is SLAB_TYPESAFE_BY_RCU and not zeroed on allocation, the value is the stale byte of a previously freed request socket, which an off-path peer can influence by sending concurrent MP_JOIN SYNs. This corrupts the path manager's id-based subflow bookkeeping for the connection. Restore subflow_req->local_id from the cookie entry, as done for the other fields. | ||||
| CVE-2026-89553 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nouveau/gem: reserve the bo in the info ioctl around the vma lookup In the non-uvmm path, there could be a race between the info lookup finding the vma, and the gem close path closing the vma leading to a use-after-free. Spotted with the help of Opus 4.6. | ||||
| CVE-2026-89549 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: route to a populated pool in svc_pool_for_cpu() svc_set_num_threads() spreads the requested threads evenly across the service's pools (base = nrservs / sv_nrpools). When a service runs fewer threads than it has pools -- e.g. an nfsd configured with fewer threads than the host has NUMA nodes while running in "pernode" or "percpu" mode -- the trailing pools are left with no threads at all. svc_xprt_enqueue() selects a pool from the CPU servicing the transport, queues the transport on that pool's sp_xprts, and only wakes a thread from the same pool. Each thread services exclusively its own pool, so a transport that lands on a threadless pool is enqueued on sp_xprts and never picked up: the connection hangs indefinitely. Have svc_pool_for_cpu() skip pools that currently have no threads, falling back to the next populated pool. This trades NUMA locality for a guarantee that the work is actually serviced. sp_nrthreads is only updated under the service mutex; the lockless read here is a best-effort routing hint, so annotate it with data_race(). | ||||
| CVE-2026-89548 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: always drain cache_cleaner before destroying a cache_detail sunrpc_destroy_cache_detail() only cancels the global cache_cleaner delayed_work when cache_list is empty. During per-netns teardown cache_list is never empty because init_net's caches remain registered, so the cancel never fires. After unlink, the caller proceeds to cache_destroy_net() which kfrees the cache_detail while cache_clean() may still hold a dangling pointer to it. The result is a use-after-free: cache_dequeue() takes cd->queue_lock on freed memory, and cache_put() dereferences cd->cache_put as a function pointer from freed slab. Drop the list_empty guard so that cancel_delayed_work_sync() always runs, ensuring any in-flight cache_clean() completes before the cache_detail is freed. Re-arm the cleaner afterwards if other caches are still registered. | ||||
| CVE-2026-89545 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: defer rq_argp and rq_resp free until after RCU grace period svc_rqst_free() frees rqstp->rq_argp and rqstp->rq_resp synchronously via kfree(), but defers the rqstp struct free via kfree_rcu(). After svc_exit_thread() calls list_del_rcu() and svc_rqst_free(), there is a window where RCU readers that started before list_del_rcu() can still traverse the thread list and find the rqstp. These readers (e.g. nfsd_nl_rpc_status_get_dumpit()) dereference rqstp->rq_argp, which has already been freed — a use-after-free. Fix this by moving the kfree of rq_argp and rq_resp into an explicit call_rcu() callback alongside the struct free. Resources not accessed by RCU readers (bvec, buffer pages, scratch folio, auth_data) remain synchronously freed. | ||||
| CVE-2026-89540 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: init gssp_lock before publishing proc entry create_use_gss_proxy_proc_entry() publishes /proc/net/rpc/use-gss-proxy via proc_create_data() before init_gssp_clnt() runs mutex_init() on sn->gssp_lock. Once the dentry is linked under proc_subdir_lock it is immediately reachable from userspace, so a write that lands in the window drives set_gssp_clnt() into mutex_lock() on a zero-initialized struct mutex. create_use_gss_proxy_proc_entry(net) proc_create_data("use-gss-proxy", ...) /* dentry live */ init_gssp_clnt(sn) mutex_init(&sn->gssp_lock) /* too late */ write_gssp() set_gssp_clnt(net) mutex_lock(&sn->gssp_lock) /* uninitialized */ gssp_rpc_create(...) sn->gssp_clnt = clnt mutex_unlock(&sn->gssp_lock) The window spans only the two statements between proc_create_data() returning and init_gssp_clnt(), so a writer reaches it only if the registering thread is preempted there while another task is already opening the freshly published file. register_pernet_subsys() runs in preemptible context under pernet_ops_rwsem, so that preemption is possible, and the window widens on auth_rpcgss module load, when the proc entry is created for every live net namespace whose tasks are already running. A writer that wins the race locks a zero-filled struct mutex. On CONFIG_DEBUG_MUTEXES the missing magic value trips a "lock used without init" splat; on a production kernel the fast path acquires the lock via CMPXCHG(owner, 0, current). In the latter case a second writer that arrives before init_gssp_clnt() re-zeroes owner can enter set_gssp_clnt() concurrently, shut down the first writer's clnt while it is still in use, and leak the loser's clnt. Fix by initializing sn->gssp_lock in sunrpc_init_net() so its lifetime matches the sunrpc_net it lives in. sn->gssp_clnt is already NULL from the kzalloc that backs net_generic storage, so the lazy helper is no longer needed; drop init_gssp_clnt(), its prototype, and the call from create_use_gss_proxy_proc_entry(). sunrpc.ko is a build-time dependency of auth_rpcgss.ko, so sunrpc_init_net() has always run on every netns before any auth_gss pernet init can publish the proc entry. | ||||
| CVE-2026-89511 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: qede: Fix NULL pointer dereference in TPA fragment processing Under memory pressure, the qede driver encounters NULL pointer dereferences when processing TPA continuation fragments. Commit 8a8633978b84 ("qede: Add build_skb() support.") accidentally dropped the assignment of tpa_info->buffer.data in qede_tpa_start(). When memory pressure causes an SKB allocation failure in qede_tpa_start(), the driver sets tpa_start_fail = true and attempts to recycle the physical page later in qede_tpa_end() via qede_reuse_page(). However, because buffer.data was left uninitialized (NULL), qede_reuse_page() pushes a "ghost" BD (valid DMA mapping but NULL data pointer) back into the active Rx ring. The next time the hardware uses this ring slot, it passes a NULL page to qede_fill_frag_skb(), causing a kernel panic. Example crash from production system: BUG: unable to handle kernel NULL pointer dereference at 0x8 RIP: qede_fill_frag_skb+0x96/0x430 [qede] Call Trace: qede_rx_int+0xb06/0x1de0 qede_poll+0x2f4/0x6c0 __napi_poll+0x2d/0x130 Fix the root cause by restoring the tpa_info->buffer.data assignment in qede_tpa_start(), ensuring valid pages are correctly tracked and recycled. Additionally, update the stale comment for struct qede_agg_info::buffer to reflect its current usage. | ||||
| CVE-2026-89510 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Cancel reg_work before freeing device on remove c4iw_uld_state_change() queues reg_work to register the RDMA device. c4iw_remove() can free ctx->dev while this work is pending or running, leaving c4iw_register_device() accessing the freed device. Cancel reg_work before removing the device. The registration work can tear down ctx->dev when registration fails, so do not unregister or deallocate it again in that case. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-89488 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: Fix CT limit teardown use-after-free Packet processing uses CT limit state under RCU, while netns teardown frees that state under ovs_mutex. The CT limit pointer was neither removed from readers nor protected by a grace period, allowing packet processing to dereference the freed state. An unprivileged user can trigger this bug from a user and network namespace, causing a slab-use-after-free in ovs_ct_execute() when the netns is torn down. Publish the CT limit pointer through RCU, remove it before teardown, and wait for readers before freeing its contents. Keep ovs_mutex around individual CT limit updates, and use the RCU read-side lock while GET traverses the RCU-protected limit lists. Netns teardown detaches the RCU-protected CT limit state in the pernet .pre_exit callback while holding ovs_mutex. The pernet core guarantees an RCU grace period between the .pre_exit and .exit callbacks, so the .exit callback completes the teardown without adding any extra synchronization. The netlink command handlers do not need NULL checks because the userspace netlink socket holds an active reference to its network namespace while a request is processed. The per-netns exit path therefore cannot run concurrently with SET, DEL, or GET for that socket's namespace. | ||||
| CVE-2026-89487 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: only skb_tx_error() a packet we are about to drop queue_userspace_packet() borrows the packet skb -- it only copies it into a private netlink message (user_skb) and does not own it; on return do_execute_actions() keeps forwarding it through the flow's remaining actions. Its error path nevertheless calls skb_tx_error(skb), which via skb_zcopy_clear() does skb_shinfo(skb)->flags &= ~SKBFL_ALL_ZEROCOPY, stripping SKBFL_SHARED_FRAG from that live skb (skb_tx_error()'s kerneldoc says "skb must be freed afterwards"). For a MSG_ZEROCOPY skb carrying page-cache frags, SKBFL_SHARED_FRAG is what makes esp_input() skb_cow_data() before in-place AEAD; once it is stripped a later local ESP-in-UDP delivery decrypts in place over pages the sender does not own -- an unprivileged page-cache write (the "Fragnesia" primitive). do_execute_actions() ignores output_userspace()'s return value, so any action after a failed USERSPACE upcall inherits the stripped skb. Move the skb_tx_error() to the flow-miss drop path - the "default" branch of ovs_dp_process_packet()'s switch(error), before kfree_skb(). The call has been here since commit 36d5fe6a0007 ("core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errors") but was harmless until esp_input() began relying on SKBFL_SHARED_FRAG to gate in-place decrypt; only then did stripping it on a still-forwarded skb become a page-cache write primitive. | ||||
| CVE-2026-89483 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme: zero the discard fallback page nvme_setup_discard() always maps sizeof(struct nvme_dsm_range) * NVME_DSM_MAX_RANGES = 4096 bytes as the DSM payload however many ranges the command declares, because some devices ignore the 'Number of Ranges' field - the Fixes: commit records two that read past the declared ranges. A single-range discard fills only the first 16 bytes. Normally the buffer comes from kzalloc() and the other 4080 bytes are zero. When that allocation fails the code falls back to the per-controller ctrl->discard_page, which nvme_init_ctrl() obtains with alloc_page(GFP_KERNEL) and nothing ever zeroes, so those 4080 bytes are whatever the page last held and are handed to the controller. Reaching it requires the kzalloc(GFP_ATOMIC | __GFP_NOWARN) to fail, that is memory pressure; it is not remotely triggerable. Failing the allocation under KMSAN reproduces it, with the leaked tail full of vmemmap struct page pointers. The extent in the report is a partial transfer of the payload, not the whole 4096 bytes; the 16-byte boundary in it is the one declared range: [ 11.991601] BUG: KMSAN: uninit-value in dma_map_phys+0x14c8/0x1900 [ 11.991969] dma_map_phys+0x14c8/0x1900 [ 11.992220] dma_map_page_attrs+0xcf/0x130 [ 11.992485] e1000_xmit_frame+0x4099/0x6d10 [ 11.992768] dev_hard_start_xmit+0x22f/0xa80 [ 11.993068] sch_direct_xmit+0x35c/0xcb0 [ 11.993315] __dev_queue_xmit+0x1ee5/0x5eb0 [ 11.993608] ip_finish_output2+0x1903/0x1c30 [ 11.993881] ip_finish_output+0x288/0x870 [ 11.994125] ip_output+0x15e/0x400 [ 11.994365] __ip_queue_xmit+0x1e85/0x1fb0 [ 11.994639] ip_queue_xmit+0x60/0x80 [ 11.994899] __tcp_transmit_skb+0x4e71/0x5fa0 [ 11.995210] tcp_write_xmit+0x3a36/0x9160 [ 11.995533] __tcp_push_pending_frames+0xc5/0x3c0 [ 11.995854] tcp_push+0x7dc/0x840 [ 11.996076] tcp_sendmsg_locked+0x766c/0x8400 [ 11.996371] tcp_sendmsg+0x4b/0x90 [ 11.996572] inet_sendmsg+0x134/0x2a0 [ 11.996823] __sock_sendmsg+0x265/0x360 [ 11.997076] sock_sendmsg+0x100/0x1e0 [ 11.997293] nvme_tcp_try_send+0x196f/0x6370 [ 11.997605] nvme_tcp_queue_rq+0x1d54/0x20b0 [ 11.997882] blk_mq_dispatch_rq_list+0x5ee/0x2e50 [ 11.998175] __blk_mq_sched_dispatch_requests+0x16dc/0x24a0 [ 11.998539] blk_mq_sched_dispatch_requests+0x11b/0x2c0 [ 11.998865] blk_mq_run_work_fn+0x13b/0x280 [ 11.999146] process_scheduled_works+0x966/0x1ad0 [ 11.999465] worker_thread+0xe44/0x1480 [ 11.999709] kthread+0x53b/0x600 [ 11.999927] ret_from_fork+0x29f/0x7c0 [ 12.000191] ret_from_fork_asm+0x1a/0x30 [ 12.000460] [ 12.000558] Uninit was created at: [ 12.000788] __alloc_frozen_pages_noprof+0x8bf/0xd30 [ 12.001096] alloc_pages_mpol+0x1d0/0x5f0 [ 12.001326] alloc_pages_noprof+0x102/0x290 [ 12.001627] nvme_init_ctrl+0x5a3/0x9f0 [ 12.001891] nvme_tcp_create_ctrl+0xd75/0x19b0 [ 12.002170] nvmf_dev_write+0x4c68/0x4fd0 [ 12.002426] vfs_write+0x587/0x1a10 [ 12.002636] __x64_sys_write+0x207/0x4f0 [ 12.002874] x64_sys_call+0x2ff0/0x3ea0 [ 12.003123] do_syscall_64+0x147/0x3b0 [ 12.003400] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 12.003680] [ 12.003777] Bytes 16-2843 of 2844 are uninitialized [ 12.004068] Memory access of size 2844 starts at ffff888109f82000 [ 12.004412] [ 12.004530] CPU: 0 UID: 0 PID: 101 Comm: kworker/0:1H Not tainted 7.2.0-rc5-NVMECTL-gf5098b6bae76 #1 PREEMPT(lazy) [ 12.005127] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 12.005762] Workqueue: kblockd blk_mq_run_work_fn [ 12.006073] ===================================================== Allocate the page with __GFP_ZERO. The single allocation site covers every use of it: bytes no discard has written stay zero, and bytes one did write hold that controller's own range list, which it has already been sent. | ||||
| CVE-2026-89481 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix host memory disclosure on R2T for a read command nvme_tcp_handle_r2t() does not check the direction of the request the R2T refers to. A malicious controller can send an R2T for a READ and the host will answer it: nvme_tcp_setup_h2c_data_pdu() builds the H2CData header and nvme_tcp_try_send_data() sends the request's data buffer. That buffer is the READ destination, so its contents go to the controller. The command then completes normally and nothing is logged. Against a test controller that answers every READ with an R2T, a 4096 byte buffered read returned all 4096 bytes, split over two R2Ts. The pages contained stale kernel data, including an array of struct page pointers. Reject an R2T for a request that is not a write. | ||||
| CVE-2026-89480 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: reject a read that transferred too few bytes nvme_tcp_recv_data() completes a request once the current C2HData PDU has been consumed. Nothing compares the total bytes received against the length the command asked for: struct nvme_tcp_request has no receive-side counter, queue->data_remaining is per queue, and blk_mq_end_request() completes for blk_rq_bytes(rq) unconditionally with no residual concept anywhere above. A controller can therefore answer a 4096-byte read with 512 bytes and have it reported as a complete read; user space then gets 4096 bytes of which 3584 are whatever was already in the page. I reproduced that with a test target. Count the bytes received and refuse to complete a successful read whose count does not match, at the two NVME_TCP_F_DATA_SUCCESS paths and in nvme_tcp_process_nvme_cqe(). The success test shifts req->status right by one, because the driver keeps the wire value there and shifts it on completion, so the check must see what the completion path will see. Only REQ_OP_READ is checked, because there the length comes from the sectors the request covers; a passthrough command is built by its submitter, which picks both command and buffer, so the kernel has nothing to compare against. | ||||
| CVE-2026-89477 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix NULL deref on untransmitted RECONF completion sctp_process_strreset_outreq(), sctp_process_strreset_addstrm_out() and sctp_process_strreset_resp() complete a pending stream reconfiguration request by stopping the reconf timer on the transport it was sent on: t = asoc->strreset_chunk->transport; if (timer_delete(&t->reconf_timer)) sctp_transport_put(t); chunk->transport is assigned by __sctp_packet_append_chunk() when the chunk is appended to an outbound packet, and sctp_outq_flush_ctrl() arms the reconf timer at that same point. A request already published in asoc->strreset_chunk but not yet transmitted has neither, so completing it dereferences NULL. Two ways to get there. sctp_send_asconf_del_ip() sets asoc->src_out_of_asoc_ok without sending anything when the address being removed is the association's last one, and sctp_outq_flush_ctrl() then leaves every non-ASCONF control chunk queued; as only sctp_process_asconf_ack() clears that flag, it persists. An unprivileged process that removes such an address and then asks for a stream reset panics the kernel from softirq. A peer needs neither ASCONF nor local help: sctp_cmd_interpreter() uncorks the outqueue only once the whole packet has been processed, so a reply built while walking a RECONF chunk stays untransmitted for the rest of that walk, and one RECONF chunk carrying [Incoming SSN Reset Request, Outgoing SSN Reset Request, Response] -- or two RECONF chunks in one packet -- reaches the same dereference. KASAN: null-ptr-deref in range [0x00000000000001e8-0x00000000000001ef] RIP: 0010:timer_delete+0x67/0x110 Call Trace: <IRQ> sctp_process_strreset_addstrm_out (net/sctp/stream.c:832) sctp_sf_do_reconf (net/sctp/sm_statefuns.c:4212) sctp_do_sm (net/sctp/sm_sideeffect.c:1172) sctp_assoc_bh_rcv (net/sctp/associola.c:1044) sctp_rcv (net/sctp/input.c:243) ip_local_deliver (net/ipv4/ip_input.c:262) process_backlog (net/core/dev.c:6680) </IRQ> A response can only acknowledge a request that was actually sent, so do not match asoc->strreset_chunk while chunk->transport is NULL. Guarding the lookup covers all three completion sites. | ||||