| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: refuse an automount below a mount that is in no namespace
It's possible to add autmounts even when the parent mount isn't in the
mount namespace of the caller. The only requirement we have is that the
parent mount namespace must not be NULL, i.e., unmounted.
Problem is that clone_private_mount() has MNT_NS_INTERNAL which makes
that trivially true. So that passes the test and attach_recursive_mnt()
accepts that as a mount point and funny enough, count_mounts()
dereferences MNT_NS_INTERNAL. The problem is it is an error pointer...
So we can reach this in userspace via fanotify. A filesystem mark on the
lower filesystem of an overlay reports paths on the layer clone and
reading the event hands out a descriptor on it. For example with debugfs
as the lower layer it goes kaboom:
openat(evfd, "tracing", O_DIRECTORY)
Oops: general protection fault
KASAN: null-ptr-deref in range [0x1d0-0x1d7]
RIP: 0010:count_mounts+0x35/0x200
attach_recursive_mnt
finish_automount
And since that sleeping beauty happens under namespace_sem held for
writing every mount operation on the system blocks from then on.
Congrats.
Use is_mounted() instead which rejects unmounted and internal mounts
alike. The open fails with EINVAL just as it did before
clone_private_mount() used MNT_NS_INTERNAL. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: unhash a dentry before detaching the mounts on it
unlink(), rmdir() and rename() remove the entry from the filesystem,
call detach_mounts() on the entry with the inode locked and then call
d_delete() once the inode is unlocked.
The thing is that between detach_mounts() and d_delete() the dentry is
still hashed and positive. But after detach_mounts() nothing covers the
dentry anymore. A lookup that finds this dentry in the dcache can
uncover what the mounts hid.
That's a problem when unlinking files or directories that are
mountpoints in other mount namespaces. Everybody who had the underlying
entry covered can race the detach_mount() call until d_delete() has run.
The race window isn't all that small. It encompasses namespace_unlock()
with a full synchronize_rcu_expedited() grace period and the
inode_unlock() of the entry.
In my experiments three walkers that kept trying read an overmounted
file in 11938 of the 16140 unlinks that removed its mountpoint from a
bind mount of the filesystem within a minute.
Fun fact, d_invalidate() has the same ordering problem but gets it
right. It unhashes the dentry first and detaches the mounts afterwards.
Let's do the same in __detach_mounts():
- A lookup that hasn't found the dentry yet misses it in the dcache and
waits for the directory lock that the caller holds until the name is
gone for good.
- A lockless lookup that found it already fails the mount_lock check
while the dentry still counts as a mountpoint and the d_seq check once
it doesn't, and retries.
This fixes the lockless path. We still need to fix the reference count
lookup in a follow-up patch.
So d_drop() the dentry. The dentry stays positive and held but can't be
found anymore. Then proceed with the detach and unlink.
Reproducer:
The reads were counted with the program below, three walkers for 60 s
in a VM with 4 CPUs. The race window is stretched with the debug patch
pasted here. fs.detach_race_walk_us sleeps in lookup_fast() once it
found a mountpoint dentry and before its mounts are crossed.
fs.detach_race_unlink_us sleeps in vfs_unlink() between detach_mounts()
and d_delete().
// SPDX-License-Identifier: GPL-2.0
/*
* unlink_covered: unlink a file that is a mountpoint in a detached copy of
* its mount, against lookups that open it through that copy.
*
* A is a tmpfs with the file f1 (content SECRET_F) and the plain file
* MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound
* on A'/f1, held through an O_PATH fd on its root once the tree fd is
* closed. Walkers open f1 through that fd while the driver unlinks A/f1,
* where nothing is mounted on it. A walker may read MARK_A or get ENOENT.
* A read of SECRET_F is a hit: the name was found after its mount was
* gone. The lockless walks use openat2(RESOLVE_CACHED).
*
* usage: unlink_covered [-t seconds] [-w walkers]
*/
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <errno.h>
#include <fcntl.h>
#include <pthread.h>
#include <stdatomic.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <linux/openat2.h>
#ifndef __NR_open_tree
#define __NR_open_tree 428
#endif
#ifndef __NR_move_mount
#define __NR_move_mount 429
#endif
#ifndef __NR_openat2
#define __NR_openat2 437
#endif
#ifndef OPEN_TREE_CLONE
#define OPEN_TREE_CLONE 1
#endif
#ifndef OPEN_TREE_CLOEXEC
#define OPEN_TREE_CLOEXEC O_CLOEXEC
#endif
#ifndef MOVE_MOUNT_F_EMPTY_PATH
#define MOVE_MOUNT_F_EMPTY_PATH 0x00000004
#endif
#define WORK "/tmp/uc"
#define ADIR WORK "/A"
static int duration = 60, nwalkers = 3;
static atomic_int stop, writer_waiting;
static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER;
static int cur_fd = -1; /* the root of A', -1 wh
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
unshare: don't drop active namespace references that were never taken
Active references on the namespaces of an nsproxy are taken when the
nsproxy is installed into a task in switch_task_namespaces() and
copy_namespaces() and dropped again by put_nsproxy() through
deactivate_nsproxy().
But ksys_unshare() calls put_nsproxy() on an nsproxy that was never
installed when set_cred_ucounts() fails. The new namespaces of that
nsproxy go from zero to minus one and the namespaces shared with the
caller lose a reference that belongs to the nsproxy the caller keeps
using:
WARNING: kernel/nscommon.c:171 at __ns_ref_active_put+0x1cd/0x230
nsproxy_ns_active_put
deactivate_nsproxy
ksys_unshare
Afterwards the namespaces the caller lives in aren't listed by listns()
anymore. set_cred_ucounts() only fails when alloc_ucounts() can't
allocate and it only allocates when the real uid of the caller differs
from its effective uid.
Commit cefd55bd2159 ("nsproxy: fix free_nsproxy() and simplify
create_new_namespaces()") separated the two cases on purpose.
nsproxy_free() frees an nsproxy that was prepared but never installed
and that's what a failed setns() uses in put_nsset(). Export it and use
it for a failed unshare() as well. |
| LangGraph checkpoint savers provide Postgres- and SQLite-backed state persistence for LangGraph workflows and agents. Prior to langgraph-checkpoint-postgres 3.1.3 and langgraph-checkpoint-sqlite 3.1.2, PostgresStore, AsyncPostgresStore, SqliteStore, and AsyncSqliteStore flatten namespace labels with ".".join(namespace), while BaseStore validates labels only for put and aput. Unvalidated dotted labels passed through get, search, delete, list_namespaces, their asynchronous equivalents, or direct batch and abatch operations can resolve to another tenant's stored namespace, allowing cross-namespace reads, overwrites, or deletion. InMemoryStore is not affected because it compares namespace tuples. This issue is fixed in langgraph-checkpoint-postgres 3.1.3 and langgraph-checkpoint-sqlite 3.1.2. |
| IBM MQ could allow an authenticated attacker to cause a denial of service by sending specially crafted multicast status messages that trigger a NULL pointer dereference. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| IBM MQ Operator could allow an authenticated attacker to cause a denial of service or potentially execute arbitrary code due to unrestricted Java deserialization in the MQ Classes for Java. |
| IBM MQ could allow an authenticated attacker to cause a limited denial of service and obtain very limited information about process memory layout due to an out-of-bounds read when processing a specially crafted client request. |
| An authentication bypass vulnerability in the SSH daemon of AOS-8 allows an unauthenticated remote attacker to circumvent existing authentication controls. Successful exploitation allows an attacker to gain administrative privileges leading to complete compromise of the AOS-8 host. |
| A buffer overflow vulnerability exists in the PAPI protocol of AOS-8 that could allow an unauthenticated remote attacker to circumvent existing authentication controls. Successful exploitation could allow an attacker to gain administrative access, modify system configurations, and access or manipulate sensitive data. |
| There is a command injection vulnerability in the PAPI protocol (Aruba's access point management protocol) of AOS-8 that could lead to unauthenticated remote code execution by sending specially crafted packets to the affected UDP port. Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system. |
| An unauthenticated SQL injection vulnerability exists in the PAPI protocol in AOS-8. Successful exploitation could allow an unauthenticated remote attacker to obtain and modify sensitive information in the underlying database and to interrupt the normal operation of the affected service. |
| Command injection vulnerabilities in the affected interface of AOS-8 could allow an authenticated remote attacker with high privileges to perform command injection. Successful exploitation could allow an attacker to execute commands with the privileges of the impacted mechanism on the underlying operating system. |
| CAI Content Credentials is affected by an Improper Input Validation vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to bypass security measures and gain unauthorized limited write access. Exploitation of this issue does not require user interaction. |
| Improper synchronization in the OpenVPN ovpn-dco-win for Windows versions 0.6.5 through 1.3.5 and 2.4.0 through 2.8.7 allows local attackers to trigger a deadlock via a crafted write to the ovpn-dco device, causing the host to become unresponsive. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmveth: h_free logical LAN on open-fail after register
ibmveth_open() registers the logical LAN, then allocates the RX
buffer pools. A pool failure jumps to out_free_buffer_pools without
h_free_logical_lan(), so PHYP still owns the buffer-list page when
it is unmapped. request_irq() failure already issued the hypercall
before taking the same label.
Move that h_free to the shared post-register unwind so both paths
deregister before the buffer list is unmapped. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix XSK buffer leak on error descriptor
When the error bit is set in the RX completion descriptor, the buf_state
and its attached buffer should be freed. In the case of AF_XDP ZC, the
XSK buffer was not freed, leading to a leak.
This issue was caught by LLM. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix XSK buffer leak when rings are stopped
GVE does not free XSK buffers when resetting ring state as a part of
stopping queues. This causes all XSK buffers which are posted to the
NIC to be leaked.
Free XSK buffers attached to an allocated buf_state when stopping rings.
This issue was hit in production. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix napi_disable deadlock when attempting to disable XSK pools
When disabling XSK pools, GVE calls the unlocked versions of
napi_disable and napi_enable. However, the netdev lock has already been
acquired before ndo_bpf is called because GVE supports queue management
ops. Calling the unlocked versions of napi_disable/enable results in a
deadlock when attempting to disable XSK pools, as the thread attempts to
re-acquire a lock it already holds.
Update the NAPI calls to use the locked versions.
This issue was found in production. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mpsse: fix race when arming the IRQ poll worker
gpio_mpsse_irq_enable() arms the poll worker before publishing it:
schedule_work() runs before the worker is added to priv->workers. If
gpio_mpsse_disconnect() walks the list in that window it misses the
worker, and once disconnect returns, the USB core frees mpsse_priv
while the orphaned gpio_mpsse_poll() work keeps accessing it, causing
a use-after-free.
Fix this by publishing and arming the worker in one irq_spin
critical section. Teardown walks the same list under irq_spin, so a
worker found on the list is guaranteed to be armed, and
cancel_work_sync() handles it whether it is queued or running.
A worker armed after the disconnect walk would still be missed, so
also set a new priv->dying flag under irq_spin before the teardown
walk, and check it in the same critical section, freeing it via
kfree_rcu() instead when the device is going away, since kfree()
would be called with the IRQ core's raw spinlock held and may sleep
on PREEMPT_RT. schedule_work() is safe to call with irq_spin held,
and the next probe gets a fresh mpsse_priv, so the flag never needs
to be cleared.
This issue was found by an in-house static analysis tool. |
