| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: fix missing barrier between anon_vma init and vma->anon_vma publish
On arm64 server, we find that a task trying to grab the anon_vma lock
triggers hungtask.
INFO: task main:2354726 blocked for more than 120 seconds.
Tainted: G E 5.10.0-0021.aarch64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:main state:D stack: 0 pid:2354726 ppid:2350673 flags:0x00000a01
Call trace:
__switch_to+0x7c/0xbc
__schedule+0x3b4/0x8a0
schedule+0x50/0xe0
rwsem_down_write_slowpath+0x3cc/0x6cc
down_write+0x60/0x260
__anon_vma_prepare+0x6c/0x210
do_anonymous_page+0x258/0x660
handle_pte_fault+0x188/0x214
__handle_mm_fault+0x1b0/0x380
handle_mm_fault+0xf4/0x284
do_page_fault+0x19c/0x494
do_translation_fault+0xcc/0xf8
do_mem_abort+0x48/0xac
el0_da+0x44/0x80
el0_sync_handler+0x88/0xb4
el0_sync+0x160/0x180
After analyzing the vmcore, we found the anon_vma->root->rwsem.count is
-1. There is another anon_vma whose anon_vma->root->rwsem.count is 1, the
anon_vma->root->rwsem.owner shows the lock is held, but the stack of the
task shows the task doesn't hold the anon_vma lock.
After adding more debugging info, we found __anon_vma_prepare() reuses
anon_vma and triggers the UAF of anon_vma->root due to missing memory
barrier, leading to locking and unlocking two different anon_vma->root,
thus leading to an anon_vma will never be unlocked, and another anon_vma
couldn't be locked anymore.
This race requires two adjacent VMAs that are not merged but are
anon_vma-compatible (e.g., they differ in VMA_ACCESS_FLAGS that can be
changed by mprotect()). Two threads fault on each VMA concurrently, both
calling __anon_vma_prepare() with only mmap_lock held for reading.
THREAD A THREAD B
__anon_vma_prepare __anon_vma_prepare
find_mergeable_anon_vma() -> NULL
anon_vma = anon_vma_alloc();
anon_vma->root = anon_vma;
// the two stores may be reordered
vma->anon_vma = anon_vma;
// finds A's anon_vma
anon_vma = find_mergeable_anon_vma(vma);
anon_vma_lock_write(anon_vma);
// may still see the old root
down_write(&anon_vma->root->rwsem);
anon_vma_unlock_write(anon_vma);
// see the new root, never unlock old
up_write(&anon_vma->root->rwsem);
thread A triggers page fault and calls __anon_vma_prepare() to prepare
anon_vma for the faulting vma. __anon_vma_prepare() allocates and
initializes a new anon_vma, and then publishes it to the vma with a plain
store. anon_vma_prepare() only requires the mmap_lock to be held for
reading, so two threads can fault on adjacent VMAs at the same time.
While thread A publishes a new anon_vma, thread B could find the anon_vma
via find_mergeable_anon_vma() and then locks anon_vma->root->rwsem.
The store to anon_vma->root in anon_vma_alloc() and the store to
vma->anon_vma can be reordered. The anon_vma_lock_write() and spin_lock()
only provide acquire semantics, which do not prevent prior stores from
being reordered after them. The release semantics of the corresponding
spin_unlock() and anon_vma_unlock_write() come too late, the store to
vma->anon_vma is already published before they take effect. As a result,
thread B can observe the following order:
vma->anon_vma = anon_vma;
anon_vma->root = anon_vma;
The anon_vma slab is SLAB_TYPESAFE_BY_RCU, so a newly allocated anon_vma
may reuse memory from a previously freed one. The constructor
(anon_vma_ctor) does not reset anon_vma->root, and __put_anon_vma()
doesn't clear it either, so the old root value persists until
anon_vma_alloc() overwrites it. If that store isn't v
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: do not dissolve gigantic pages without runtime support
dissolve_free_hugetlb_folio() doesn't check
hstate_is_gigantic_no_runtime(h) though remove_hugetlb_folio()/
update_and_free_hugetlb_folio() silently bail for such folios, so it frees
a still-listed folio and, on vmemmap restore failure, the
add_hugetlb_folio() rollback corrupts the free list. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/vaddr: avoid hw-driven pte updates during damon_hugetlb_mkold()
damon_hugetlb_mkold() reads the page table entry into a local variable,
unsets the accessed bit in the variable, and updates the page table entry
with the updated variable value. If hardware updates the same page table
entry in parallel, the hw updates could be lost. For example,
hardware-updated dirty bits might be lost.
Avoid the parallel updates by clearing the page table entry when reading
it together, using huge_ptep_get_and_clear(). If a parallel write to the
memory is made after the clearing, the hw will see the page table entry is
cleared, trigger page fault and wait until it is handled. The page fault
handling will wait for damon_hugetlb_mkold() due to the page table lock.
Because hugetlbfs is an in-memory file system and hugetlb pages cannot be
reclaimed, no critical issue is expected to my best knowledge. But
definitely this is a nasty bug that should be fixed sooner rather than
later.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: of_property: Omit bus properties without a subordinate bus
A bridge (a device with a Type 1 header) may not have a secondary bus
allocated (pdev->subordinate), e.g., if there are no available bus numbers
or the bridge secondary/subordinate bus numbers are not writable.
The dynamic OF helpers of_pci_prop_bus_range() and of_pci_prop_intr_map()
dereference pdev->subordinate without checking it. When
CONFIG_PCI_DYNAMIC_OF_NODES is enabled, this can cause a NULL pointer
dereference and early boot hang.
Generate 'bus-range' and 'interrupt-map' properties only when a subordinate
bus exists. Keep the node and its remaining properties for bridges without
one.
The problem was latent since 407d1a51921e ("PCI: Create device tree node
for bridge"), but wasn't reachable until 1f340724419e ("PCI: of: Create
device tree PCI host bridge node"), which appeared in v6.15. Before
1f340724419e, of_pci_make_dev_node() returned early because the parent OF
node was missing.
[bhelgaas: move pdev->subordinate test to callees, commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
packet: use ubuf_info completion for TX_RING packets
tpacket_snd sends skbs with frags pointing into its ring slots. Slots
are released when skb->destructor is called.
A call to skb_orphan calls skb->destructor before the skb is freed.
This can cause the slot to be reused while still linked into the skb.
Switch to standard zerocopy completion (ubuf_info) so the slot is only
released once all references to the payload are freed or copied.
Restore skb->destructor to standard sock_wfree.
The ubuf_info completion callback can be called with a NULL skb, but
only from net_zcopy_put and related API, used by zerocopy implementations
that hold their own reference on the uarg, such as MSG_ZEROCOPY. This
uarg is only ever completed from skb_zcopy_clear, so skb is always set.
To prevent userspace from aliasing in-flight state on shared ring
slots, allocate tpacket_uarg per packet, rather than per slot. This
adds a small allocation to the transmit path. Use standard kmalloc to
allow backporting to stable kernels.
The uarg holds an sk_wmem_alloc reference, rather than an sk_refcnt
reference. packet_free_tx_ring waits on sk_wmem_alloc before freeing
the ring pages. Always allocate vec->deferred for tx_ring so page-backed
rings also wait on sk_wmem_alloc when skb_copy_ubufs drops page refs
before calling tpacket_ubuf_complete.
Drop the tx_ring.pg_vec test that tpacket_destruct_skb performed before
accessing the slot. The sk_wmem_alloc reference now guarantees that the
slot is valid. The test is also not sufficient by itself, as it reads
pg_vec without pg_vec_lock, so it can race with packet_set_ring.
As a result a slot is released when its payload is copied, which can
be before transmission (e.g., in skb_orphan_frags_rx). If copied
before skb_tx_timestamp() is called, no slot timestamp is recorded,
similar to when skb_orphan() was called early in the datapath before
this patch.
Revert the now unused previous skb_zcopy_.._nouarg infra.
Depends on commit 992cc9f94ca9 ("net/packet: defer vmalloc TX_RING
free until skbs finish"). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: alps: unregister DualPoint Stick input device on remove
alps_input_configured() allocates a second input device ("DualPoint
Stick") with input_allocate_device() and registers it, but the
alps_driver struct has no .remove handler and input2 is not tracked in
hdev->inputs. The default remove path (hid_hw_stop -> hidinput_disconnect)
only iterates hdev->inputs, so input2 is never unregistered and leaks
on every device removal.
Add a .remove handler that stops the device first (preventing URB
callbacks from touching input2 during teardown) and then unregisters
input2. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: alps: fix use-after-free on input2 registration failure
alps_input_configured() stores data->input2 before calling
input_register_device(). If registration fails, input_free_device()
frees the input device but data->input2 still points to the freed memory.
alps_input_configured() calls hid_hw_open() before allocating input2, so
URBs are already active and raw_event can fire during the failure window.
A U1_SP_ABSOLUTE_REPORT_ID report arriving then causes u1_raw_event()
to dereference the freed data->input2 -> use-after-free.
Fix by only storing input2 into drvdata after successful registration
and adding a NULL guard in the raw_event path. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-oxp: use cancel_delayed_work_sync() in remove
oxp_hid_remove() uses cancel_delayed_work() for all three delayed work
items. cancel_delayed_work() only dequeues a pending work item without
waiting for a currently executing callback to finish. If any of the
work callbacks (oxp_rgb_queue_fn, oxp_btn_queue_fn, oxp_mcu_init_fn) is
running at the time of removal, the callback continues executing
concurrently with hid_hw_close() and hid_hw_stop(), accessing the HID
device after it has been closed and stopped.
Use cancel_delayed_work_sync() instead to ensure that any in-progress
work callback completes before device teardown proceeds. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix OOB read in wacom_wac_pen_serial_enforce()
The 'wacom_wac_pen_serial_enforce()' function may calculate and pass an
invalid offset to hid_field_extract(), resulting in memory reads at
incorrect addresses -- possibly beyond the end of the report. If a
field in the HID descriptor lists more usages than its Report Count
actually reserves space for, the function's inner 'j' will walk past
the end of the field:
for (i = 0; i < report->maxfield; i++) {
for (j = 0; j < report->field[i]->maxusage; j++) {
...
value = hid_field_extract(hdev, raw_data + 1,
offset + j * size, size);
A descriptor listing 12288 usages against Report Count 1 has the loop
extract the usage at index 12287 from bit offset 98296 -- about 12 KB
past a 2-byte received report. The value is stored in
wacom_wac->serial[0] and can reach userspace as an MSC_SERIAL event,
making this an information disclosure.
Clamp the loop to field->report_count, the number of value slots the
report holds. Value slots past the last declared usage are still
scanned; they reuse that usage (HID 1.11, 6.2.2.8).
Verified on v6.12.105 with a UHID reproducer: a 2-byte report from
such a descriptor trips KASAN before the patch and not after it. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix rev_entry reference leak in mlx5_tc_ct_shared_counter_get()
When the reverse entry is found but its counter is already being
released, refcount_inc_not_zero() fails and the reference taken by
mlx5_tc_ct_entry_get() is never dropped before falling through to
create_counter. Drop it so the reverse entry is not kept alive forever
by a shared counter lookup that did not use it. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: fix swapped IPv6 IPsec policy masks
IPv6 XFRM policies may use different source and destination prefix
lengths. mlx5e_ipsec_policy_mask() builds the corresponding masks
independently, but setup_fte_addr6() installs each mask in the opposite
address field.
When the prefix lengths differ, this makes the source match use the
destination prefix and the destination match use the source prefix. The
resulting hardware rule can both miss traffic covered by the policy and
match traffic outside it.
Install each mask in its corresponding match field. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: npu: cancel wdt_work after releasing the WDT IRQ
airoha_npu_remove() calls cancel_work_sync() on each core's wdt_work,
but the watchdog IRQ that queues it is requested with devm_request_irq()
and is freed only after .remove() returns. airoha_npu_wdt_handler() can
therefore schedule_work() again once the cancel has returned. struct
airoha_npu, which contains the work, is devm_kzalloc()'d and is freed in
that same unwind, so the late work dereferences freed memory.
Register the work with devm_work_autocancel() before devm_request_irq()
and drop .remove(). Devres runs in reverse order, so the IRQ is freed
before cancel_work_sync(), including when probe fails. A cancel left in
.remove() cannot get that order. Initializing the work first also stops
a pending watchdog interrupt from queuing an uninitialized work item.
Probe currently calls INIT_WORK() only after devm_request_irq().
This issue was identified during our ongoing static-analysis research
while reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
net: arp: terminate device name before lookup
The ARP ioctl copies a user-provided struct arpreq into a stack object. Its
arp_dev field may contain IFNAMSIZ bytes without a NUL terminator.
Such input is passed to dev_get_by_name_rcu() or __dev_get_by_name(), where
strcmp() can read past the end of the stack object when a matching
alternative interface name exists.
Terminate the field before the lookup to prevent the out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atl1: fix soft lockup on out-of-range cmb_tpd_next_to_clean read
Same issue as atl1c (see the first commit in this series, "net:
atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware
can report an out-of-range cmb_tpd_next_to_clean (seen as 0xffff)
while the PCIe link/MAC is resetting. An out-of-range value can
never be reached and the loop below would spin forever. Treat it as
"nothing new to clean" instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipconfig: bound DHCP option construction
ic_dhcp_init_options() appends the hostname (option 12), vendor-class
(option 60) and client-ID (option 61) options into the fixed 312-byte
bootp_pkt.exten[] buffer. Only the client-ID branch checked the
remaining space; the hostname and vendor-class writes were unbounded.
A 64-byte hostname together with the maximum 252-byte dhcpclass=
identifier needs 18 + (2 + 64) + (2 + 252) = 338 of the 312 available
bytes even before the terminating END marker, so the vendor-class memcpy
runs past the end of exten[]. With CONFIG_FORTIFY_SOURCE this is
reported as a field-spanning write and, when the kernel is booted with
panic_on_warn=1, aborts boot with a panic.
Route the optional options through a common helper that makes sure the
option, its 2-byte header and the END marker all fit and drops an option
that would not. Configurations with short options keep sending exactly
the same bytes as before. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix dma_alloc_coherent() leak on macb_alloc() error paths
Fix 3 leaks in macb_alloc() error paths:
- Tx buffer allocated but crossing a 4G boundary: Tx leaked.
- Rx buffer allocation fails: Tx leaked.
- Rx buffer allocated but crossing a 4G boundary: Tx & Rx leaked.
This is because our error handling calls macb_free(bp) which in turn
frees the buffers stored in bp->queues[0], but nothing has been stored
in there. Fix by storing allocated buffers into bp->queues[0] ASAP. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: conntrack: avoid modifying shared unconfirmed ct entry
In a case where skb with an unconfirmed ct entry gets cloned, we may
end up committing both but with different sets of extensions.
The series of events:
1. The first clone wants to commit and runs the helpers wiring up
the extension pointer into the expectation list.
2. Then it looses the confirmation keeping the entry unconfirmed.
3. Second clone now wants to commit labels and adds the new extension
for that breaking the pointer in the expectation list causing
UAF on the destruction path later.
While this is possible to trigger, there should be no practical
network pipeline where committing both clones without modifications
into the same zone is needed. So, let's just reset the entry in case
for some reason we got an skb with a shared one during commit. This
doesn't affect any known use cases, but avoids any potential problems
with sharing and modification of the unconfirmed ct entry.
The fixes tag points to the introduction of helpers, since that's the
main UAF trigger for the sharing. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: conntrack: fix helper UAF due to extensions realloc
While calling the helpers, a raw pointer to the extensions area is
wired into expectations list:
-> nf_ct_helper()
-> helper->help()
-> nf_ct_expect_related_report()
-> nf_ct_expect_insert()
-> hlist_add_head_rcu(&exp->lnode, &master_help->expectations)
In case the connection is not confirmed yet, more extensions can be
added afterwards with *_ext_add() calls reallocating the extension
space and leaving the now invalid pointer in the expectations list
that is later accessed while removing the expectation.
Make sure that helpers are called at the end after all the other
extensions are already added.
Note that the helper rejection now leaves the mark and labels set,
but that's not different from how the NAT was handled before or how
the mark and the labels were handled on confirmation failure. And
there are no atomicity guarantees provided by the API anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atl1c: fix soft lockup on out-of-range tpd_cons read
The hardware can report an out-of-range tpd_cons (seen as 0xffff)
while the PCIe link/MAC is resetting. An out-of-range value can
never be reached and the loop below would spin forever. To avoid
a soft lockup treat it as "nothing new to clean" instead.
Reproduced on two machines, same NIC (Qualcomm Atheros AR8151 v2.0,
4-port), triggered by rebooting a Mikrotik CCR2004 PCIe card that
the ports are directly linked to:
- Ubuntu 26.04.1 LTS, kernel 7.0.0-31-generic. The link-flap
precursor, before the lockup was captured with a full trace
elsewhere:
atl1c 0000:05:00.0 enp5s0f0: NETDEV WATCHDOG: CPU: 4: transmit queue 2 timed out 489984 ms
atl1c 0000:05:00.0: MAC state machine can't be idle since disabled for 10ms second
atl1c 0000:05:00.0: atl1c: enp5s0f0 NIC Link is Up<65535 Mbps Full Duplex>
65535 (0xffff) here is the same value tpd_cons reads back once the
loop below gets stuck.
- Proxmox VE, kernel 7.0.14-11-pve. Same NIC/trigger, this time
caught by the soft lockup watchdog with a full stack trace:
watchdog: BUG: soft lockup - CPU#12 stuck for 354s! [napi/eth%d-0:329]
CPU: 12 UID: 0 PID: 329 Comm: napi/eth%d-0 Tainted: P O L 7.0.14-11-pve #1 PREEMPT(lazy)
RIP: 0010:atl1c_clean_tx+0x142/0x2d0 [atl1c]
Call Trace:
<TASK>
__napi_poll+0x32/0x1e0
napi_threaded_poll_loop+0x286/0x2e0
napi_threaded_poll+0xfd/0x140
kthread+0xf7/0x130
ret_from_fork+0x2da/0x3a0
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: atl1e: fix soft lockup on out-of-range hw_next_to_clean read
Same issue as atl1c (see the first commit in this series, "net:
atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware
can report an out-of-range hw_next_to_clean (seen as 0xffff) while
the PCIe link/MAC is resetting. An out-of-range value can never be
reached and the loop below would spin forever. Treat it as "nothing
new to clean" instead. |
