Export limit exceeded: 408903 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (1472 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64123 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: hsr: defer node table free until after RCU readers HSR node-list and node-status generic-netlink operations run under rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table with plain list_del() and frees each node immediately. That lets a generic-netlink reader hold a struct hsr_node pointer across hsr_dellink(). In a KASAN build, widening the reader window after hsr_get_next_node() obtains the node reproduces a slab-use-after-free when the reader copies node->macaddress_A; the freeing stack is hsr_del_nodes() from hsr_dellink(). Use list_del_rcu() and defer the free through the existing hsr_free_node_rcu() callback. This matches the lifetime rule used by the HSR prune paths, which already delete nodes with list_del_rcu() and call_rcu(). | ||||
| CVE-2026-64117 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb ieee80211_invoke_fast_rx() reads RX status through IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the unicast forward path, mesh_data does: info = IEEE80211_SKB_CB(fwd_skb); memset(info, 0, sizeof(*info)); on the same skb the caller still names via rx->skb, then either queues the skb for TX (success) or kfree_skb()'s it (no-route) before returning RX_QUEUED. The caller's RX_QUEUED arm then calls sta_stats_encode_rate(status) on memory that is either zeroed (success path) or freed (no-route path). The latter is KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle. Fix by encoding the rate from status before invoking ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value captured while status was still backed by valid memory. | ||||
| CVE-2026-53401 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: omap2: fix use-after-free in omapfb_mmap omapfb_mmap() has a race condition with OMAPFB_SETUP_PLANE ioctl that can lead to use-after-free: The fb_mmap() entry point holds mm_lock but not lock (fb_info->lock), while ioctl handlers like OMAPFB_SETUP_PLANE hold lock but not mm_lock. This allows concurrent execution. In omapfb_mmap(): 1. rg = omapfb_get_mem_region(ofbi->region); // Get old region ref 2. start = omapfb_get_region_paddr(ofbi); // Read from NEW region 3. len = fix->smem_len; // Read from NEW region 4. vm_iomap_memory(vma, start, len); // Map NEW region memory 5. atomic_inc(&rg->map_count); // Increment OLD region! Concurrently, OMAPFB_SETUP_PLANE can: - Reassign ofbi->region = new_rg - Update fix->smem_len - OMAPFB_SETUP_MEM then checks NEW region's map_count (0!) and frees it This leaves userspace with a mapping to freed physical memory. The fix is to read all required values (start, len) from the same region reference (rg) that will have its map_count incremented, preventing the region from being freed while still mapped. | ||||
| CVE-2026-53025 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: greybus: raw: fix use-after-free on cdev close This addresses a use-after-free bug when a raw bundle is disconnected but its chardev is still opened by an application. When the application releases the cdev, it causes the following panic when init on free is enabled (CONFIG_INIT_ON_FREE_DEFAULT_ON=y): refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 139 at lib/refcount.c:28 refcount_warn_saturate+0xd0/0x130 ... Call Trace: <TASK> cdev_put+0x18/0x30 __fput+0x255/0x2a0 __x64_sys_close+0x3d/0x80 do_syscall_64+0xa4/0x290 entry_SYSCALL_64_after_hwframe+0x77/0x7f The cdev is contained in the "gb_raw" structure, which is freed in the disconnect operation. When the cdev is released at a later time, cdev_put gets an address that points to freed memory. To fix this use-after-free, convert the struct device from a pointer to being embedded, that makes the lifetime of the cdev and of this device the same. Then, use cdev_device_add, which guarantees that the device won't be released until all references to the cdev have been released. Finally, delegate the freeing of the structure to the device release function, instead of freeing immediately in the disconnect callback. | ||||
| CVE-2026-46311 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: fix access to stale wptr mapping Use drm_exec to take both locks i.e vm root bo and wptr_obj bo to access the mapping data properly. This fixes the security issue of unmap the wptr_obj while a queue creation is in progress and passing other bo at same address. (cherry picked from commit 1fc6c8ab45dbee096469c08c13f6099d57a52d6c) | ||||
| CVE-2026-46210 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: iris: fix use-after-free of fmt_src during MBPF check During concurrency testing, multiple instances can run in parallel, and each instance uses its own inst->lock while the core->lock protects the list of active instances. The race happens because these locks cover different scopes, inst->lock protects only the internals of a single instance, while the Macro Blocks Per Frame (MBPF) checker walks the core list under core->lock and reads fields like fmt_src->width and fmt_src->height. At the same time, iris_close() may free fmt_src and fmt_dst under inst->lock while the instance is still present in the core list. This allows a situation where the MBPF checker, still iterating through the core list, reaches an instance whose fmt_src was already freed by another thread and ends up dereferencing a dangling pointer, resulting in a use-after-free. This happens because the MBPF checker assumes that any instance in the core list is fully valid, but the freeing of fmt_src and fmt_dst without removing the instance from the core list is not correct. The correct ordering is to defer freeing fmt_src and fmt_dst until after the instance has been removed from the core list and all teardown under the core lock has completed, ensuring that no dangling pointers are ever exposed during MBPF checks. | ||||
| CVE-2026-31573 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: Fix kernel panic due to __initconst misuse Fix a kernel panic when probing the driver as a module: Unable to handle kernel paging request at virtual address ffffd9c18eb05000 of_find_matching_node_and_match+0x5c/0x1a0 hantro_probe+0x2f4/0x7d0 [hantro_vpu] The imx8mq_vpu_shared_resources array is referenced by variant structures through their shared_devices field. When built as a module, __initconst causes this data to be freed after module init, but it's later accessed during probe, causing a page fault. The imx8mq_vpu_shared_resources is referenced from non-init code, so keeping __initconst or __initconst_or_module here is wrong. Drop the __initconst annotation and let it live in the normal .rodata section. A bug of __initconst called from regular non-init probe code leading to bugs during probe deferrals or during unbind-bind cycles. | ||||
| CVE-2026-31501 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: ti: icssg-prueth: fix use-after-free of CPPI descriptor in RX path cppi5_hdesc_get_psdata() returns a pointer into the CPPI descriptor. In both emac_rx_packet() and emac_rx_packet_zc(), the descriptor is freed via k3_cppi_desc_pool_free() before the psdata pointer is used by emac_rx_timestamp(), which dereferences psdata[0] and psdata[1]. This constitutes a use-after-free on every received packet that goes through the timestamp path. Defer the descriptor free until after all accesses through the psdata pointer are complete. For emac_rx_packet(), move the free into the requeue label so both early-exit and success paths free the descriptor after all accesses are done. For emac_rx_packet_zc(), move the free to the end of the loop body after emac_dispatch_skb_zc() (which calls emac_rx_timestamp()) has returned. | ||||
| CVE-2026-53349 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack: destroy stale expectfn expectations on unregister NAT helpers such as nf_nat_h323 store a raw pointer to module text in exp->expectfn (e.g. ip_nat_q931_expect). nf_ct_helper_expectfn_unregister() only unlinks the callback descriptor and never walks the expectation table, so an expectation pending at module removal survives with a dangling exp->expectfn into freed module text. When the expected connection arrives, init_conntrack() invokes exp->expectfn(), now a stale pointer into the unloaded module. Reproduced on a KASAN build by loading the H.323 helpers, creating a Q.931 expectation, unloading nf_nat_h323, then connecting to the expected port: Oops: int3: 0000 [#1] SMP KASAN NOPTI RIP: 0010:0xffffffffa06102d1 init_conntrack.isra.0 (net/netfilter/nf_conntrack_core.c:1862) nf_conntrack_in (net/netfilter/nf_conntrack_core.c:2049) ipv4_conntrack_local (net/netfilter/nf_conntrack_proto.c:223) nf_hook_slow (net/netfilter/core.c:619) __ip_local_out (net/ipv4/ip_output.c:120) __tcp_transmit_skb (net/ipv4/tcp_output.c:1715) tcp_connect (net/ipv4/tcp_output.c:4374) tcp_v4_connect (net/ipv4/tcp_ipv4.c:345) __sys_connect (net/socket.c:2167) Modules linked in: nf_conntrack_h323 [last unloaded: nf_nat_h323] Reaching the dangling state requires CAP_SYS_MODULE in the initial user namespace to remove a NAT helper that still has live expectations, so this is a robustness fix; leaving an expectation pointing at freed text is wrong regardless. Add nf_ct_helper_expectfn_destroy(), which walks the expectation table and drops every expectation whose ->expectfn matches the descriptor being torn down. Call it from each NAT helper's exit path after the existing RCU grace period, so no expectation outlives the code it points at and no extra synchronize_rcu() is introduced. With the fix, the same reproducer runs to completion without the Oops. | ||||
| CVE-2026-53275 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: Fix use-after-free when processing MLD queries When processing an MLD query, a pointer to the multicast group address is retrieved when initially parsing the packet. This pointer is later dereferenced without being reloaded despite the fact that the skb header might have been reallocated following the pskb_may_pull() calls, leading to a use-after-free [1]. Fix by copying the multicast group address when the packet is initially parsed. [1] BUG: KASAN: slab-use-after-free in __mld_query_work (net/ipv6/mcast.c:1512) Read of size 8 at addr ffff8881154b8e90 by task kworker/4:1/118 Workqueue: mld mld_query_work Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_address_description.constprop.0 (mm/kasan/report.c:378) print_report (mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) __mld_query_work (net/ipv6/mcast.c:1512) mld_query_work (net/ipv6/mcast.c:1563) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> [...] Freed by task 118: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6251 mm/slub.c:6566) pskb_expand_head (net/core/skbuff.c:2335) __pskb_pull_tail (net/core/skbuff.c:2878 (discriminator 4)) __mld_query_work (net/ipv6/mcast.c:1495 (discriminator 1)) mld_query_work (net/ipv6/mcast.c:1563) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) | ||||
| CVE-2026-53228 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: sit: reload inner IPv6 header after GSO offloads ipip6_tunnel_xmit() caches the inner IPv6 header pointer at function entry and continues using it after iptunnel_handle_offloads(). For GSO skbs, iptunnel_handle_offloads() calls skb_header_unclone(). When the skb header is cloned, skb_header_unclone() can call pskb_expand_head(), which may move the skb head. The pskb_expand_head() contract requires pointers into the skb header to be reloaded after the call. If the later skb_realloc_headroom() branch is not taken, SIT uses the stale iph6 pointer to read the inner hop limit and DS field. That can read from a freed skb head after the old head's remaining clone is released. Reload iph6 after the offload helper succeeds and before subsequent reads from the inner IPv6 header. Keep the existing reload after skb_realloc_headroom(), since that branch can also replace the skb. | ||||
| CVE-2026-53006 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible UAF in icmpv6_rcv() Caching saddr and daddr before pskb_pull() is problematic since skb->head can change. Remove these temporary variables: - We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr when net_dbg_ratelimited() is called in the slow path. - Avoid potential future misuse after pskb_pull() call. | ||||
| CVE-2026-52929 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: stream: fully roll back denied add-stream state When ADD_OUT_STREAMS is denied, SCTP only shrinks the queued chunks and then lowers outcnt. That leaves removed stream metadata behind, so a later re-add can reuse a stale ext and hit a null-pointer dereference in the scheduler get path. Fix the rollback by tearing down the removed stream state the same way other stream resizes do. Unschedule the current scheduler state, drop the removed stream ext state with sctp_stream_outq_migrate(), and then reschedule the remaining streams. This keeps scheduler-private RR/FC/PRIO lists consistent while fully rolling back denied outgoing stream additions. | ||||
| CVE-2026-52923 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipc: limit next_id allocation to the valid ID range The checkpoint/restore sysctl path can request the next SysV IPC id through ids->next_id. ipc_idr_alloc() currently forwards that request to idr_alloc() with an open-ended upper bound. If the valid tail of the SysV IPC id space is full, the allocation can spill beyond ipc_mni. The returned SysV IPC id still uses the normal index encoding, so later lookup and removal can target the wrong slot. This leaves the real IDR entry behind and breaks the IDR state for the object. The bug is in ipc_idr_alloc() in the checkpoint/restore path. 1. ids->next_id is passed to: idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...) 2. The zero upper bound makes the allocation effectively open-ended. Once the valid SysV IPC tail is occupied, idr_alloc() can spill past ipc_mni and allocate an entry beyond the valid IPC id range. 3. The new object id is still encoded with the narrower SysV IPC index width: new->id = (new->seq << ipcmni_seq_shift()) + idx 4. Later removal goes through ipc_rmid(), which uses: ipcid_to_idx(ipcp->id) That truncates the real IDR index. An object actually stored at a high index can then be removed as if it lived at a low in-range index. 5. For shared memory, shm_destroy() frees the current object anyway, but the real high IDR slot is left behind as a dangling pointer. 6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry and dereferences freed memory. Prevent this by bounding the requested allocation to ipc_mni so the checkpoint/restore path fails once the valid range is exhausted. | ||||
| CVE-2026-52917 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: diag: reject stale associations in dump_one path The SCTP exact sock_diag lookup can hold a transport reference, block on lock_sock(sk), and then resume after sctp_association_free() has marked the association dead and freed its bind address list. When that happens, inet_assoc_attr_size() and inet_diag_msg_sctpasoc_fill() can still dereference association state that is no longer valid for reporting. In particular, inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a real sctp_sockaddr_entry and trigger an out-of-bounds read from unrelated association memory. Reject the association after taking the socket lock if it has been reaped or detached from the endpoint, and report the lookup as stale. This keeps the exact dump-one path from formatting torn association state. | ||||
| CVE-2026-46243 | 1 Linux | 2 Kernel, Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject userspace cifs.spnego descriptions cifs.spnego key descriptions contain authority-bearing fields such as pid, uid, creduid, and upcall_target that cifs.upcall treats as kernel-originating inputs. However, userspace can also create keys of this type through request_key(2) or add_key(2), allowing those fields to be supplied without CIFS origin. Only accept cifs.spnego descriptions while CIFS is using its private spnego_cred to request the key. | ||||
| CVE-2026-46125 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: remove station if connection prep fails If connection preparation fails for MLO connections, then the interface is completely reset to non-MLD. In this case, we must not keep the station since it's related to the link of the vif being removed. Delete an existing station. Any "new_sta" is already being removed, so that doesn't need changes. This fixes a use-after-free/double-free in debugfs if that's enabled, because a vif going from MLD (and to MLD, but that's not relevant here) recreates its entire debugfs. | ||||
| CVE-2026-46113 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix shadow paging use-after-free due to unexpected GFN The shadow MMU computes GFNs for direct shadow pages using sp->gfn plus the SPTE index. This assumption breaks for shadow paging if the guest page tables are modified between VM entries (similar to commit aad885e77496, "KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE", 2026-03-27). The flow is as follows: - a PDE is installed for a 2MB mapping, and a page in that area is accessed. KVM creates a kvm_mmu_page consisting of 512 4KB pages; the kvm_mmu_page is marked by FNAME(fetch) as direct-mapped because the guest's mapping is a huge page (and thus contiguous). - the PDE mapping is changed from outside the guest. - the guest accesses another page in the same 2MB area. KVM installs a new leaf SPTE and rmap entry; the SPTE uses the "correct" GFN (i.e. based on the new mapping, as changed in the previous step) but that GFN is outside of the [sp->gfn, sp->gfn + 511] range; therefore the rmap entry cannot be found and removed when the kvm_mmu_page is zapped. - the memslot that covers the first 2MB mapping is deleted, and the kvm_mmu_page for the now-invalid GPA is zapped. However, rmap_remove() only looks at the [sp->gfn, sp->gfn + 511] range established in step 1, and fails to find the rmap entry that was recorded by step 3. - any operation that causes an rmap walk for the same page accessed by step 3 then walks a stale rmap and dereferences a freed kvm_mmu_page. This includes dirty logging or MMU notifier invalidations (e.g., from MADV_DONTNEED). The underlying issue is that KVM's walking of shadow PTEs assumes that if a SPTE is present when KVM wants to install a non-leaf SPTE, then the existing kvm_mmu_page must be for the correct gfn. Because the only way for the gfn to be wrong is if KVM messed up and failed to zap a SPTE... which shouldn't happen, but *actually* only happens in response to a guest write. That bug dates back literally forever, as even the first version of KVM assumes that the GFN matches and walks into the "wrong" shadow page. However, that was only an imprecision until 2032a93d66fa ("KVM: MMU: Don't allocate gfns page for direct mmu pages") came along. Fix it by checking for a target gfn mismatch and zapping the existing SPTE. That way the old SP and rmap entries are gone, KVM installs the rmap in the right location, and everyone is happy. | ||||
| CVE-2026-46069 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup() The mwifiex_adapter_cleanup() function uses timer_delete() (non-synchronous) for the wakeup_timer before the adapter structure is freed. This is incorrect because timer_delete() does not wait for any running timer callback to complete. If the wakeup_timer callback (wakeup_timer_fn) is executing when mwifiex_adapter_cleanup() is called, the callback will continue to access adapter fields (adapter->hw_status, adapter->if_ops.card_reset, etc.) which may be freed by mwifiex_free_adapter() called later in the mwifiex_remove_card() path. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning. | ||||
| CVE-2026-46065 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: defio: Disconnect deferred I/O from the lifetime of struct fb_info Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an instance as part of initializing deferred I/O and remove it only after the final mapping has been closed. If the fb_info and the contained deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info to invalidate the mapping. Any access will then result in a SIGBUS signal. Fixes a long-standing problem, where a device hot-unplug happens while user space still has an active mapping of the graphics memory. The hot- unplug frees the instance of struct fb_info. Accessing the memory will operate on undefined state. | ||||