| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A command injection vulnerability in Palo Alto Networks Cortex XSOAR and Cortex XSIAM OS Query content pack enables an authenticated administrator to execute arbitrary OS commands on remote endpoints. |
| A vulnerability exists in NGINX Plus and NGINX Open Source when a location is configured that uses the alias directive together with rewrite and a set or return directive referencing the $request_filename variable. Alternatively, the same result could be achieved when the $request_filename variable is used in an access log format directive. An unauthenticated attacker along with conditions beyond their control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or to possibly trigger a code execution. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A flaw was found in OpenSSH. A username entered on the ssh command line can still contain '$' or a non-trailing backslash. When a configuration expands %u inside ProxyCommand or Match exec, those characters are passed into the shell. |
| A memory corruption vulnerability exists in FFmpeg before 8.1. The RTP encoding process. In the nal_send function in libavformat/rtpenc_h264_hevc.c, a negative size parameter (size=-3) is passed to memcpy when transmitting H.264/HEVC streams via RTP using a crafted input file. This was detected using AddressSanitizer. |
| Memory Allocation with Excessive Size Value vulnerability in ericmj decimal allows Denial of Service.
Decimal.round/3 builds the full result for the requested number of decimal places before the context precision (34 digits by default) is applied, so its cost grows with the places argument instead of with the size of the result. For positive places it appends places zero digits to the coefficient as a charlist before converting it to an integer, and for negative places it builds a charlist of -places zero digits. A single call such as Decimal.round(Decimal.new("1.5"), -50_000_000) allocates about 5.5 GB of memory, which can exhaust available memory and get the BEAM VM killed. The oldest releases instead loop once per decimal place, consuming CPU in proportion to places.
Any application that passes a user-supplied number of decimal places or scale to Decimal.round/2 or Decimal.round/3 without bounding it is exposed. The input limits added for CVE-2026-32686 do not cover the places argument.
This issue affects decimal: from 0.1.0 before 3.1.2. |
| An out-of-bounds write vulnerability in the SPI host command interface of Semtech's LR11xx transceiver firmware where a crafted SPI host command with an oversized length field can cause the firmware to write up to 254 arbitrary bytes past the bounds of an internal, non-persistent memory buffer. Exploitation requires physical access to the device and logical access to the SPI bus. |
| bincookie is a header-only binarycookies parser. Prior to 0.1.9, bincookie_init_file() in bincookie.h allocates a buffer using the actual .binarycookies file length but trusts the file-controlled num_pages field as the loop bound for byte-swapping page_sizes entries. A crafted file can make the loop read and write beyond the heap allocation, and related unvalidated page sizes and cookie_offsets can drive additional out-of-bounds accesses in page and cookie iteration. Applications that parse an attacker-supplied binarycookies file may crash or suffer heap corruption that can potentially enable code execution. This issue is fixed in version 0.1.9. |
| rapidcsv is a C++ CSV parser library. Prior to 8.99, RemoveColumn, InsertColumn, RemoveRow, InsertRow, and GetColumnNames converted size_t indexes to int before adding them to std::vector iterators. On 64-bit systems, in a CSV matrix dimension containing more than 2^31 elements, an index above INT_MAX could wrap to a negative iterator offset and point before the start of the vector, causing undefined behavior, heap memory corruption, or a crash. Triggering the issue requires an extremely large in-memory document, requiring tens of gigabytes of memory at minimum, so typical CSV documents are not practically affected. This issue is fixed in version 8.99. |
| : Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Unitronics Unitronics UniStream Pro/UniLogic.
This issue affects Unitronics UniStream Pro/UniLogic: Unitronics UniStream Pro versions only (B10 / C10) – UniLogic versions prior to 1.41.329. |
| The NXP MCUX TRNG entropy driver in drivers/entropy/entropy_mcux_trng.c passed the caller's byte count straight to the vendor SDK routine TRNG_GetRandomData(). On i.MX RT5xx and RT6xx parts the SDK compiles its TRNG_SW_HEALTH_TESTS variant, which always copies whole 32-bit words and draws entropy rounded up to a multiple of 128 bytes. Its "caller buffer is full" guard tests dataSize == 0, so a request whose length is not a multiple of four makes dataSize underflow past zero and the SDK keeps writing into the caller's buffer for the entire extraction: a 1-byte request results in 128 bytes written, and any non-word-multiple length overflows by up to 127 bytes.
entropy_get_entropy() is a syscall, and its verifier in drivers/entropy/entropy_handlers.c validates only the requested length via K_SYSCALL_MEMORY_WRITE(). With CONFIG_USERSPACE enabled, an unprivileged user-mode thread that has merely been granted the entropy device can therefore choose both the destination address and a length such as 1, and cause the kernel to write up to 127 bytes beyond the region it proved it owns. On these Cortex-M33 targets there is no MMU, so user partitions and kernel data share one SRAM and the overflow can land in adjacent kernel state. The same defect is reached from kernel mode by any caller requesting a non-word-multiple length, including getentropy() and, in builds where sys_csrand_get()/sys_rand_get() resolve to the hardware generator, sys_rand8_get() and sys_rand16_get().
Impact is memory corruption of up to 127 bytes immediately following the supplied buffer — typically the caller's stack in kernel-mode use, or memory outside the caller's partition when driven through the syscall. The overflow offset is fully determined by the requested length and is therefore deterministic, while the written content is uncontrolled TRNG output; the practical consequences range from crashes and unpredictable state corruption to opportunistic escalation when kernel bookkeeping such as object permission bitmaps is overwritten. The affected devices are those where the MCUX SDK enables TRNG_SW_HEALTH_TESTS (MIMXRT595S, MIMXRT555S, MIMXRT533S, MIMXRT685S, MIMXRT633S), on which the TRNG is the zephyr,entropy chosen node; other SoCs using this driver take the SDK path that clamps the copy size and are unaffected.
The fix routes any unaligned prefix and any sub-word tail through a local bounce word and hands the SDK only word-multiple sizes, so the SDK's word-granular writes can no longer pass the end of the caller's buffer. |
| The user-mode syscall verifiers z_vrfy_fuel_gauge_get_props() and z_vrfy_fuel_gauge_set_props() in drivers/fuel_gauge/fuel_gauge_syscall_handlers.c declared two variable-length arrays, union fuel_gauge_prop_val k_vals[len] and fuel_gauge_prop_t k_props[len], sized directly by the caller-supplied len argument. len is an unvalidated size_t taken straight from the syscall ABI, and the VLAs were allocated before any check at all — including before the K_SYSCALL_DRIVER_FUEL_GAUGE() object-permission check. The subsequent k_usermode_from_copy() calls validated only that the user source buffer was readable; the kernel destination was never bounds-checked, since it was sized by the same attacker-chosen len.
Any thread running in user mode with CONFIG_USERSPACE enabled can invoke fuel_gauge_get_props() or fuel_gauge_set_props() with a large len. This first displaces the supervisor stack pointer by an arbitrary attacker-chosen amount — Zephyr does not build with stack-clash probing, so the displacement itself does not fault, and the nested calls made by the verifier then write frames below the privileged stack. If the caller has been granted access to a fuel-gauge device object, the memcpy inside k_usermode_from_copy() additionally writes len * sizeof(union fuel_gauge_prop_val) bytes of fully attacker-controlled data starting well below the stack base. CONFIG_PRIVILEGED_STACK_SIZE defaults to 1024 bytes, so a len of roughly 170 already exhausts it.
The result is an out-of-bounds write in supervisor mode with attacker-controlled length and, on the permitted path, attacker-controlled content — a break out of the user-mode sandbox into kernel memory, leading to kernel code execution or a system crash. A stack guard region does not contain it, because the copy begins below the guard and walks upward, corrupting unprotected memory before the guard is reached. The fix removes the kernel-side copies entirely and validates the caller's arrays in place with K_SYSCALL_MEMORY_ARRAY_READ() / K_SYSCALL_MEMORY_ARRAY_WRITE(), which also handle the len * size multiplication overflow; this is safe because neither fuel_gauge_prop_t nor union fuel_gauge_prop_val contains embedded pointers. |
| The Goodix GT9xx input driver in drivers/input/input_gt911.c reads the touch point count from the controller's status register and masks it with GT911_TOUCH_POINTS_MSK (0x0F), yielding a value of 0..15. In gt911_process() that value is used directly as the loop bound for filling point_reg[], a stack array sized to CONFIG_INPUT_GT911_MAX_TOUCH_POINTS, whose Kconfig range is 1..5 with a default of 1. No other check constrains the count; the driver relied only on a comment asserting that the controller had been programmed at init to report no more points than configured.
Each loop iteration issues an I2C read of eight bytes straight into point_reg[i], so a controller that reports more points than the array holds causes up to 112 bytes of peer-supplied data to be written past the end of the array, over the stack frame of gt911_process() in the system workqueue thread. Two further loops then read out of bounds from the same array. Triggering it requires control of, or the ability to substitute, the I2C touch controller — plausible on the many supported boards where the GT9xx panel is a pluggable display module or shield rather than an on-PCB part; a spoofed device need only answer the init probes with a supported product ID and a checksum-valid config blob. The same overflow can also occur non-adversarially, with a GT9271-class panel that ignores the driver's touch-count programming and reports up to ten points, or with bus corruption of the single status byte.
The impact is an out-of-bounds stack write with fully attacker-chosen content executing at kernel privilege, i.e. potential control-flow hijack on the host MCU, in addition to out-of-bounds reads and crashes. The attack vector is physical/local hardware access only; there is no network, USB, or syscall path to the defect. The fix clamps the reported count with min() against CONFIG_INPUT_GT911_MAX_TOUCH_POINTS before any array indexing. |
| SoX through 14.4.2 contains a heap out-of-bounds write vulnerability in lsx_ms_adpcm_block_expand_i() in src/adpcm.c, triggered by an odd samplesPerBlock value in the WAV fmt chunk. Attackers can supply a crafted MS ADPCM WAV file to sox or any libsox consumer to write a partially controlled 16-bit sample past the heap buffer allocated by wav_ms_adpcm_fmt(). |
| libsmi through 0.5.0 contains an out-of-bounds write vulnerability in smiValueAsString() in lib/smi.c that allows attackers to overflow a fixed 1024-byte static buffer through hex rendering of OCTET STRING values. Attackers can supply a crafted MIB with an OCTET STRING DEFVAL of 512 or more octets and a leading 0x00 byte to corrupt adjacent library globals and crash smidump or other consumers. |
| An OS Command Injection vulnerability affecting Tuleap Enterprise Edition from 17.0 through 17.5 could allow an attacker to execute arbitrary commands on the server. |
| mise manages dev tools like node, python, cmake, and terraform. Prior to 2026.7.14, in the default non-safe mode, mise loads .mise.toml [settings] from an untrusted local project before trust approval and strip_local_only_settings removes only fields marked global_only. The unix_default_file_shell_args, unix_default_inline_shell_args, windows_default_file_shell_args, and windows_default_inline_shell_args settings were not marked global_only, allowing a repository to replace the default interpreter arguments used by trusted tasks that have no explicit shell, postinstall directives, template exec operations, or hooks that fall back to the default shell. When mise appends the trusted command after the attacker-controlled interpreter arguments, the attacker-selected command can execute first with the developer account's privileges even though the local configuration was never trusted. The separate path-sanitization hardening note in the advisory is outside this vulnerability. This issue is fixed in version 2026.7.14. |
| ExifTool for photo and video 5.0.1-gms by CellHubs constructs shell command strings from file paths and invokes /system/bin/sh -c. In the CSV-export path, the selected media path is merely surrounded with single quotes; embedded single quotes are not escaped. |
| NXP MQX Classic before 5.0 contains an out-of-bounds write vulnerability in the RTCS UDP recvfrom() implementation. Improper enforcement of the application-supplied receive buffer length may allow a crafted UDP packet to overflow the destination buffer, resulting in memory corruption, or denial of service. |
| Godot Engine through 4.7.2 has a heap out-of-bounds write in the Radiance HDR (.hdr) image decoder (modules/hdr/image_loader_hdr.cpp). The run-length decoding loop expands RLE instructions read from the file into a buffer sized from the image dimensions, without validating that an instruction's repeat/copy count fits the remaining capacity of the row buffer. A crafted .hdr file therefore writes attacker-supplied bytes past the end of the heap allocation, with the overflow length and content controlled by the file. The defect is reached automatically when the product imports a crafted .hdr (e.g., when opening a project containing one), and at runtime in exported projects that load untrusted .hdr images. NOTE: the Supplier's position is that the research has identified "no security issues" because the required attacker access is outside of the current Godot Engine threat model. |
| libTiMidity through 0.2.8 contains a stack out-of-bounds write vulnerability in the SoundFont loader that allows attackers to corrupt stack memory via unchecked generator operators in parse_gen. Attackers can supply a crafted .sf2 file with out-of-range pgen/igen operator values to write chosen 16-bit values near the stack Layer object, causing crashes and stack memory corruption. |
