| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in Netty. SpdySessionHandler accepts an unlimited number of concurrent remote-initiated streams because localConcurrentStreams defaults to Integer.MAX_VALUE and the handler provides no API to change it. A remote peer can open a SPDY connection and send a large number of SYN_STREAM frames with FLAG_FIN=0, causing unbounded heap and direct memory allocation that can lead to JVM OutOfMemoryError and a denial of service. |
| Lychee is a free, open-source photo-management tool. Prior to 7.7.0, GET /docs/api exposes the Scramble-generated OpenAPI documentation configured by config/scramble.php to unauthenticated callers after installation, with observed response size and latency suggesting that the schema is regenerated without an application-level cache. A remote attacker can repeatedly request the unthrottled route to consume server CPU and obtain a detailed map of the API surface and parameter schema. This issue is fixed in version 7.7.0. |
| Lychee is a free, open-source photo-management tool. Prior to 7.7.0, Lychee enables ImageMagick PDF support with Ghostscript but does not apply an effective pre-render limit to PDF page dimensions in ImagickHandler::loadPdf(). An authenticated user who can upload a small PDF with an oversized /MediaBox can cause Imagick::readImage() to consume substantial CPU before failing to produce an image. When QUEUE_CONNECTION selects synchronous processing the request can occupy a web worker, while the official asynchronous Docker configuration can clog the shared image-processing queue and delay other work. The advisory did not identify a Ghostscript sandbox escape. This issue is fixed in version 7.7.0. |
| In `api-gateway` versions till `1.7.3`, The default rate-limit key resolver, `ClientIpKeyResolver`, derives the per-client bucket key from the leftmost element of the `X-Forwarded-For` request header. That element is supplied by the originating HTTP client and is not validated against any trusted-proxy list. A single attacker can therefore obtain an unlimited number of independent rate-limit buckets — one per unique header value — and completely bypass the gateway's request-rate limiting on every route that uses the shipped default configuration. |
| Uncontrolled Recursion vulnerability in Protobuf.JSON.Decode in elixir-protobuf protobuf allows an unauthenticated remote attacker to crash the decoding process via a deeply nested JSON document. Any application that decodes attacker-supplied JSON with Protobuf.JSON.decode/3, Protobuf.JSON.decode!/3, or Protobuf.JSON.from_decoded/3 into a schema that contains a self-referential or cyclic message type is affected.
In lib/protobuf/json/decode.ex, the embedded-message clause of decode_singular/3 recurses into internal_from_json_data/3 once per nesting level without incrementing or checking the decoder's depth counter. The depth guard increase_depth_and_maybe_throw/1 covers only the Google.Protobuf.ListValue and Google.Protobuf.Struct clauses, so the recursion_limit option has no effect on user-defined message types. Each nesting level allocates a stack frame and heap objects, and a sufficiently deep document exhausts the memory of the decoding process. Confidentiality and integrity are not affected.
This issue affects protobuf: from 0.8.0 before 0.17.1. |
| In Eclipse Vert.x versions [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the HTTP proxy provides a body transformer interceptor that relies on a max buffered bytes limit to ensure a bounded buffer for each request. This can be used to force a server to indefinitely allocate heap. This vulnerability requires to use an intercepting body transformer.
The impacted component is io.vertx:vertx-http-proxy. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the WebSocket implementation does not define a maximum number of bytes allocation when decompressing frames or messages. This can be used to implement DDOS attacks with a zip bomb.
The impacted component is io.vertx:vertx-core. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x Redis client RESP parser pre-allocates arrays to a length declared by the server without enforcing an upper bound. A malicious or compromised Redis server, or an attacker in a man-in-the-middle position, can send a crafted RESP response declaring an extremely large array, push, or attribute length, causing the client to attempt a massive heap allocation. The resulting OutOfMemoryError crashes the Vert.x event loop thread, denying service to all connections and verticles sharing that loop.
The impacted component is io.vertx:vertx-mysql-client. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Eclipse Vert.x MQTT (vertx-mqtt) MqttClient stores every inbound QoS 2 PUBLISH message received from the broker in an internal map (qos2inbound) while awaiting the corresponding PUBREL packet to complete the QoS 2 handshake. This map has no size limit; the maxInflightQueue option is enforced only on the outbound publish path and does not constrain inbound message retention.
A malicious or compromised MQTT broker can exploit this by sending QoS 2 PUBLISH messages with distinct packet identifiers and withholding the PUBREL responses. Each incomplete handshake causes the client to retain the full publish message (topic, payload, and metadata) indefinitely, leading to unbounded memory growth in the Vert.x process. This can degrade the MQTT-consuming application or cause out-of-memory termination.
The impacted component is io.vertx:vertx-mqtt. |
| OWASP Coraza WAF is a golang modsecurity compatible web application firewall library. From 3.0.0 until 3.8.1, Coraza silently drops arguments after SecArgumentsLimit in internal/corazawaf/transaction.go, while internal/bodyprocessors/urlencoded.go writes ARGS_POST without enforcing the cap. The flaw is triggered when an unauthenticated attacker sends more arguments than SecArgumentsLimit or supplies bodies that expand beyond the configured argument and flattening budgets. An unauthenticated attacker can flood requests with arguments so excess values are silently omitted from ARGS, ARGS_GET, ARGS_NAMES, ARGS_GET_NAMES, ARGS_POST, or ARGS_PATH before security rules inspect them; affected urlencoded and JSON processing can also consume excessive memory. The omission can bypass WAF rules protecting the downstream application, and unbounded or amplified argument processing can cause memory consumption and service degradation. This issue is fixed in version 3.8.1. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost_iotlb: bound map allocation in add_range
vhost_iotlb_add_range_ctx() only retires an old entry when the table
has a non-zero limit, has exactly reached that limit and has
VHOST_IOTLB_FLAG_RETIRE set. Non-retiring tables can keep allocating
entries after reaching their configured limit.
Existing vhost devices allocate their IOTLB with max_iotlb_entries from
vhost.c, which defaults to 2048 and is tunable by module parameter. Use
the caller-provided limit at the allocation point instead of adding a
separate default in the common IOTLB helper, and reject non-positive
values in vhost paths that can report an error.
Other vhost IOTLB users should not create zero-limit tables when entries
can be populated from userspace or guest-controlled requests. Add
caller-side max_iotlb_entries parameters for mlx5 vDPA, VDUSE and
vhost-vDPA. Reject non-positive VDUSE and vhost-vDPA values, and require
at least two entries for vdpa_sim and mlx5 vDPA paths that install
full-range mappings, since those mappings are split into two IOTLB
entries.
Handle full-range mappings in the common helper by checking that the
IOTLB can hold both split entries before inserting the first half. This
avoids returning an error after leaving a half mapping behind.
When the table is full, keep the existing retire behavior for retiring
tables and return -ENOSPC for non-retiring tables. Reuse the retired map
node instead of freeing it and allocating a replacement, so a stream of
IOTLB updates cannot keep forcing GFP_ATOMIC allocations after the table
has reached its limit. If a zero-limit IOTLB still reaches the common
helper, treat it as a configuration error and return -EINVAL.
I found this bug myself, though the patch was written with AI assistance. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix folio_queue ENOMEM in writeback by adding a mempool
Fix the handling of folio_queue allocation failure in writeback by adding a
mempool and passing in gfp_t flags to the rolling buffer functions that
allocate memory, using the mempool if gfp != GFP_KERNEL.
This is then extended upwards and the gfp to be used for a request is stored
in the netfs_io_request struct and is then used for both requests and
subrequests, eliminating the sleeping loops there.
The failure caused:
folio != NULL
WARNING: fs/netfs/write_issue.c:603 at netfs_writepages+0x883/0xa10 fs/netfs/write_issue.c:603, CPU#3: syz.0.17/5919 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: use kvzalloc to allocate struct dc
struct dc has grown large over time (most of it the two inlined
dc_scratch_space copies) and now sits close to the page allocator's 4 MiB
contiguous allocation limit. Its actual size is not fixed by the source
alone, it also depends on the compiler and the .config, so it can easily
cross 4 MiB, e.g. with a newer GCC or a config change.
dc_create() allocates it with kzalloc(). Once struct dc exceeds 4 MiB the
request is rounded up to order 11 (8 MiB), which is above MAX_PAGE_ORDER,
so the page allocator warns and returns NULL. dc_create() then fails, DM
init fails and amdgpu probe aborts with -EINVAL:
WARNING: mm/page_alloc.c:5197 at __alloc_frozen_pages_noprof+0x2f9/0x380
dc_create+0x38/0x660 [amdgpu]
amdgpu_dm_init+0x2d9/0x510 [amdgpu]
dm_hw_init+0x1b/0x90 [amdgpu]
amdgpu_device_init.cold+0x150d/0x1e13 [amdgpu]
amdgpu_driver_load_kms+0x19/0x80 [amdgpu]
amdgpu_pci_probe+0x1e2/0x4c0 [amdgpu]
dc_create() then returns NULL and DM init fails, which aborts the whole
GPU init and makes amdgpu probe fail with -EINVAL ("hw_init of IP block
<dm> failed -22"), leaving the display unusable. The subsequent
amdgpu_irq_put() warnings during teardown are just fallout of unwinding
a half-initialized device.
struct dc is a software-only bookkeeping structure that is never handed
to hardware DMA and is only ever kept as an opaque pointer, so it does
not require physically contiguous memory. Allocate it with kvzalloc()
(and free it with kvfree()) so that the allocator can fall back to
vmalloc() when a contiguous allocation of that size is not available,
which also avoids the MAX_PAGE_ORDER warning entirely.
v2:
- Rebase to amd-staging-drm-next.
(cherry picked from commit 991e0516a8072f2292681c6ae98a924ab0e32575) |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: Avoid G2 bus error while decoding H.264 and HEVC
For the i.MX8MQ platform, there is a hardware limitation: the g1 VPU and
g2 VPU cannot decode simultaneously; otherwise, it will cause below bus
error and produce corrupted pictures, even potentially lead to system hang.
[ 110.527986] hantro-vpu 38310000.video-codec: frame decode timed out.
[ 110.583517] hantro-vpu 38310000.video-codec: bus error detected.
Therefore, it is necessary to ensure that g1 and g2 operate alternately.
This allows for successful multi-instance decoding of H.264 and HEVC.
To achieve this, g1 and g2 share the same v4l2_m2m_dev, and then the
v4l2_m2m_dev can handle the scheduling. |
| Allocation of resources without limits or throttling in Active Directory Federation Services (AD FS) allows an unauthorized attacker to deny service over a network. |
| A flaw was found in FreeIPA. A remote, unauthenticated attacker can exploit a vulnerability in the `/ipa/i18n_messages` endpoint by sending an arbitrarily large request body. This can cause the service to consume excessive memory, leading to memory exhaustion, degraded responsiveness, and a denial of service (DoS) condition. |
| A flaw was found in FreeIPA. A remote, unauthenticated attacker can exploit this vulnerability by sending oversized form POST requests to the `/ipa/migration/migration.py` endpoint. This can force the migration handler to read attacker-controlled request bodies fully into memory, leading to increased memory usage, slower request handling, and potential service disruption or denial of service. |
| ImageMagick before 6.9.13-57 and 7.x before 7.1.2-32 contains a stack overflow in the MSL decoder caused by an incorrect depth check that fails to limit recursion. Attackers can supply a set of crafted MSL images that exhaust the stack when one of them is read, crashing the process and causing a denial of service. |
| A allocation of resources without limits or throttling vulnerability in Fortinet FortiOS 7.6.0 through 7.6.6, FortiOS 7.4 all versions, FortiOS 7.2 all versions may allow attacker to denial of service via <insert attack vector here> |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Limit the maximum number of lookups
Current code does no bound checking on the number of lookups a client can
perform. Though the code restricts the lookups to local clients, there is
still a possibility of a malicious local client sending a flood of
NEW_LOOKUP messages over the same socket.
Fix this issue by limiting the maximum number of lookups to 64 globally.
Since the nameserver allows only atmost one local observer, this global
lookup count will ensure that the lookups stay within the limit.
Note that, limit of 64 is chosen based on the current platform
requirements. If requirement changes in the future, this limit can be
increased. |
