| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FreeRDP from 2.0.0 before 3.32.0 contains an insecure permission vulnerability in winpr-makecert that creates unencrypted private keys without owner-only file modes. Local users on multi-user Unix hosts can read world-readable key files or open PFX files protected by the hard-coded default password to steal private keys. |
| FreeRDP from 3.0.0 before 3.32.0 contains an incorrect permission assignment vulnerability that allows local users to read private keys written by crypto_write_pem without owner-only permissions. Attackers on multi-user Unix hosts can enumerate the shared temporary directory during soft-smartcard logon to read the world-readable PKINIT private-key copy. |
| Improper access control in Windows Container Isolation FS Filter Driver (unionfs.sys) allows an authorized attacker to elevate privileges locally. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
1) XSA-437 (CVE-2023-34321) addressed issues with overflows in
calculations involved in guests flushing caches through
GNTTABOP_cache_flush. Unfortunately the fix there introduced a
calculation which may underflow, resulting in a loop which would - at
least on 64-bit Arm - take excessively long, and which would likely
eventually crash the hypervisor.
This is CVE-2026-102699.
2) GNTTABOP_cache_flush may be issued on memory mapped from another
domain using the grant table interface. However there was no
restriction to disallow the use of invalidate-without-clean against
read-only grant mappings, which may corrupt the granted memory.
This is CVE-2026-102702. |
| Edgeless Systems Contrast 1.8.0 before 1.24.1 contains an incorrect permissions vulnerability where the node installer writes the containerd config world-writable (0666). Local unprivileged users on the node can modify the containerd config, for example overwriting the runc location, to escalate privileges. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Incorrect Permission Assignment for Critical Resource vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information disclosure, Protection mechanism bypass, and Unauthorized access. |
| The Gitea web route for deleting tags (`POST /{owner}/{repo}/tags/delete`) requires only write access to the Code unit, but shares its handler with release deletion and did not check that the target was a plain tag. A collaborator with Code write access and without Releases write access could permanently delete published releases of that repository, including their attachments. Protected tag rules covering the release tag still blocked the deletion. |
| An incorrect permission assignment for critical resource issue exists in AssetView, AssetView CLOUD, and AssetView Cloud +. If this vulnerability is exploited, a local authenticated attacker who can log in to the Windows system where Management Console or Client Terminal for the product is running may gain SYSTEM privileges. |
| Quasar Framework is a framework for building high-performance Vue.js user interfaces. Prior to @quasar/ssl-certificate 2.1.0, @quasar/cli 5.0.4, and @quasar/app-vite 3.3.0, the @quasar/ssl-certificate utility cached a combined private key and certificate PEM without explicitly applying owner-only filesystem permissions. Another local user able to read the cache can copy the key and impersonate a development TLS endpoint in an environment that trusts the certificate. The generated certificate was also CA-capable, carried unnecessarily broad key usages, and encoded the IPv6 loopback address as a DNS subject alternative name. This issue is fixed in @quasar/ssl-certificate 2.1.0, @quasar/cli 5.0.4, and @quasar/app-vite 3.3.0. |
| Incorrect permission assignment in GlavSoft TightVNC Server for Windows before 2.8.88 allows a local authenticated user to read or overwrite the inter-process communication handles used between the TightVNC service and its desktop server process. The named shared memory segment in the Global\ namespace that carries the pipe HANDLE values is created with a NULL DACL, and its name is derived from a time-seeded srand(time(0)) value that is predictable to one-second granularity. A low-privileged local process can open the mapping and tamper with the IPC channel of a service running as SYSTEM, potentially leading to disclosure of session data, privilege escalation, or denial of service. |
| Gradle is a build tool with a focus on build automation and support for multi-language development. When copying or archiving symlinked files, Gradle resolves them but applies the permissions of the symlink itself instead of the permissions of the linked file to the resulting file. This leads to files having too much permissions given that symlinks usually are world readable and writeable. While it is unlikely this results in a direct vulnerability for the impacted build, it may open up attack vectors depending on where build artifacts end up being copied to or un-archived. In versions 7.6.3, 8.4 and above, Gradle will now properly use the permissions of the file pointed at by the symlink to set permissions of the copied or archived file. |
| arch/x86/kvm/mmu/paging_tmpl.h in the Linux kernel before 5.12.11 incorrectly computes the access permissions of a shadow page, leading to a missing guest protection page fault. |
| A flaw was found in the Linux Kernel before 5.8-rc6 in the ZRAM kernel module, where a user with a local account and the ability to read the /sys/class/zram-control/hot_add file can create ZRAM device nodes in the /dev/ directory. This read allocates kernel memory and is not accounted for a user that triggers the creation of that ZRAM device. With this vulnerability, continually reading the device may consume a large amount of system memory and cause the Out-of-Memory (OOM) killer to activate and terminate random userspace processes, possibly making the system inoperable. |
| adm-zip is a JavaScript library for creating and extracting ZIP archives in Node.js. Prior to 0.6.1, adm-zip applies the Unix permission bits stored in a zip entry directly to the extracted file via `fs.chmodSync()` when `keepOriginalPermission=true` is passed to `extractAllTo()`/`extractEntryTo()` — and it never filters the setuid/setgid/sticky bits out of those bits. A zip crafted by an attacker can therefore produce an extracted binary with mode `04755`. When extraction runs as root (the default posture in Docker builds, CI runners, and privileged install steps — the exact environments where this flag is used), the resulting root-owned setuid file is executed later by a lesser-privileged user, turning the attacker's code into a root execution. Version 0.6.1 fixes the issue. |
| In JUnit4 from version 4.7 and before 4.13.1, the test rule TemporaryFolder contains a local information disclosure vulnerability. On Unix like systems, the system's temporary directory is shared between all users on that system. Because of this, when files and directories are written into this directory they are, by default, readable by other users on that same system. This vulnerability does not allow other users to overwrite the contents of these directories or files. This is purely an information disclosure vulnerability. This vulnerability impacts you if the JUnit tests write sensitive information, like API keys or passwords, into the temporary folder, and the JUnit tests execute in an environment where the OS has other untrusted users. Because certain JDK file system APIs were only added in JDK 1.7, this this fix is dependent upon the version of the JDK you are using. For Java 1.7 and higher users: this vulnerability is fixed in 4.13.1. For Java 1.6 and lower users: no patch is available, you must use the workaround below. If you are unable to patch, or are stuck running on Java 1.6, specifying the `java.io.tmpdir` system environment variable to a directory that is exclusively owned by the executing user will fix this vulnerability. For more information, including an example of vulnerable code, see the referenced GitHub Security Advisory. |
| .NET Core and Visual Studio Information Disclosure Vulnerability |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Incorrect Permission Assignment for Critical Resource vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| A vulnerability has been found in devopspolis secrets-replicator up to 0.4.0. Impacted is the function process_single_secret of the file src/handler.py of the component AssumeRole Handler. Such manipulation of the argument external_id leads to incorrect permission assignment. The attack can be executed remotely. Upgrading to version 0.5.0 is recommended to address this issue. The name of the patch is b42239405fbf4fae3c3f0048fc0b4225112edceb. It is suggested to upgrade the affected component. |
| Nx is a monorepo solution for TypeScript and polyglot codebases. From 14.6.0 until 22.7.9 and 23.1.2, Nx creates Unix domain sockets for its daemon and isolated plugin workers in shared temporary locations without owner-only directory and socket permissions. Another unprivileged local account on a shared build server, developer host, or multi-user container can discover and connect to a running socket because the transport performs no authentication and relies on filesystem containment. The daemon's PROCESS_IN_BACKGROUND request accepts a module path and invokes its default export, allowing a caller that controls a file to execute code as the account running Nx; other handlers can expose workspace file contents, project graphs, and task hashes. Disabling the daemon alone does not remove the vulnerable plugin-worker sockets, while single-user machines without another local account are not exposed. This issue is fixed in versions 22.7.9 and 23.1.2. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local authenticated attacker to change the ownership of arbitrary files due to improper validation of an attacker-controlled file path. |
