| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: move quota_init qc iterator increment
Move qc++ from the loop body into the for-loop increment
expression in gfs2_quota_init().
This keeps iterator progression explicit and avoids mixing pointer
advance with duplicate-slot handling in the loop body. |
| Incorrect Calculation vulnerability in RTI Connext Professional (Core Libraries) allows Abuse Existing Functionality. This issue affects Connext Professional: from 7.4.0 before 7.7.0.1, from 7.0.0 before 7.3.1.6, from 6.1.0 before 6.1.*, from 6.0.0 before 6.0.*, from 5.3.0 before 5.3.*, from 5.2.0 before 5.2.*, from 4.1x before 5.1.*. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: round bitmap stripes with sector division
raid5_bitmap_sector_map() aligns the array range to full RAID5 stripe
widths before converting it to component sectors. That width is
chunk_sectors multiplied by the number of data disks, and it is not
always a power of two.
Reproduce with a 4-disk RAID5, 1024-sector chunks, and three data disks.
The full-stripe width is 3072 sectors. For a one-sector write at array
sector 3072, correct rounding gives array range [3072, 6144), which maps
to component range [1024, 2048). The old round_down()/round_up() logic
instead gives [1024, 4096), which maps to [0, 1024).
Use sector_div() based arithmetic so the rounded range is aligned to the
actual RAID5 stripe width.
The deterministic mapper test now reports the fixed component range as
[1024, 2048), while the old mask-based range was [0, 1024). |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Adaptive Security Appliance Software, Cisco Secure Firewall Threat Defense Software and Cisco Secure Firewall Management Center Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20335 are related to incorrect calculation issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-682. |
| snipe-it before 8.7.0 contains an incorrect calculation vulnerability in checkout request handling that allows authenticated users to corrupt the assets.requests_counter through duplicate submissions and cancellations without active requests. Attackers can repeatedly call cancel endpoints without active requests to drive the counter negative, or submit duplicate checkout requests to inflate the counter, misrepresenting pending demand in the admin queue. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Serialize channel state checks
pause() and resume() read and update channel state without holding vc.lock,
while the interrupt handlers update the same state under it. Take the same
lock around those state checks so that request, status, and configured stay
consistent.
For example, pause() can observe EDMA_ST_BUSY right before the interrupt
handler completes the final descriptor and moves the channel to
EDMA_ST_IDLE, and then record EDMA_REQ_PAUSE on an already idle channel. No
further interrupt will acknowledge the request, and since issue_pending()
requires EDMA_REQ_NONE, the channel is wedged for good: terminate_all()
leaves the stale request behind, so even reconfiguring the channel does not
recover it.
issue_pending() already runs under vc.lock, but it tests configured before
taking it. Move that test under the lock as well, so configured, request,
and status are evaluated as one channel-state snapshot. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: sgp30: Handle IAQ thread creation failure
kthread_run() can fail and return an error pointer, but sgp_probe() stores
it and returns success, so the device is registered without its IAQ thread
and sgp_remove() later passes the error pointer to kthread_stop(). Return
the error from probe instead. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Always flush vpid02 on first use
Make sure vpid02 is always flushed on first use by setting last_vpid=0
when allocating vpid02. nested_vmx_transition_tlb_flush() will always
detect a VPID change on first VM-Enter after VMXON, because VPID=0 in
vmcs12 is not allowed if L1 enables VPID.
This avoids using stale TLB entries from a previous lifetime of the
VPID, that might have been associated with a different vCPU (or a
completely different VM).
Note that last_vpid is already being initialized as 0 when the vCPU is
created, but it is not reset when vpid02 is freed on VMXOFF. Hence, the
problem can only occur if L1 does VMXOFF -> VMXON, runs an L2, and KVM
happens to reuse a VPID that has TLB entries on the physical CPU. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XR Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20275 are related to incorrect calculation issues that are grouped under the Common Weakness Enumeration (CWE) CWE-682. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/ident_map: Use gbpages only where full GB page should be mapped.
When ident_pud_init() uses only GB pages to create identity maps, large
ranges of addresses not actually requested can be included in the resulting
table; a 4K request will map a full GB. This can include a lot of extra
address space past that requested, including areas marked reserved by the
BIOS. That allows processor speculation into reserved regions, that on UV
systems can cause system halts.
Only use GB pages when map creation requests include the full GB page of
space. Fall back to using smaller 2M pages when only portions of a GB page
are included in the request.
No attempt is made to coalesce mapping requests. If a request requires a
map entry at the 2M (pmd) level, subsequent mapping requests within the
same 1G region will also be at the pmd level, even if adjacent or
overlapping such requests could have been combined to map a full GB page.
Existing usage starts with larger regions and then adds smaller regions, so
this should not have any great consequence. |
| PREVAIL is a Polynomial-Runtime EBPF Verifier using an Abstract Interpretation Layer. Prior to version 0.2.4, the abstract transformer in prevail treats writes through a T_CTX-typed base register as a silent no-op: do_mem_store in src/crab/ebpf_transformer.cpp only models T_STACK stores, and the checker's T_CTX bounds arm never tests AccessType::write. An attacker can craft an eBPF program that overwrites a context field (e.g., ctx->data), reload that field typed as T_PACKET, and dereference an attacker-controlled address — and prevail will report the program as safe. This issue has been patched in version 0.2.4. |
| PREVAIL is a Polynomial-Runtime EBPF Verifier using an Abstract Interpretation Layer. Prior to version 0.2.4, in the Prevail eBPF verifier, EbpfTransformer::add() silently skips offset-variable updates when the destination register carries a non-singleton typeset (two or more simultaneously possible pointer types). Subsequent bounds checks use the stale offset and accept out-of-bounds memory accesses, so a crafted BPF program passes verification even though it would corrupt memory at runtime. This issue has been patched in version 0.2.4. |
| PREVAIL is a Polynomial-Runtime EBPF Verifier using an Abstract Interpretation Layer. Prior to version 0.2.4, the prevail eBPF verifier accepts ALU32 ADD and SUB instructions that operate on pointer-typed registers without checking the is64 flag. Because ALU32 arithmetic zero-extends the 32-bit result, the upper half of any pointer is silently destroyed at runtime, yet prevail marks the program as verified safe. Any caller that can submit an eBPF program for verification — including unprivileged users on kernels that permit BPF program loading — can produce a program that passes verification but faults or misbehaves at runtime. This issue has been patched in version 0.2.4. |
| Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.19, marketplace settlement in core/kapp/market/market.go reads MarketOrderData.ReferralPercentage from the listing while reading asset.Royalties.MarketPercentage live at purchase time. An asset owner can create a valid listing and then use AssetTrigger UpdateRoyalties to make the combined referral and royalty percentages exceed the bid. executeBuyMarket pays referral and royalty amounts unconditionally while computeMarketOwnerAmount silently skips a nonpositive seller remainder, allowing MarketBuy, BuyItNow, or auction Claim settlement to credit more KLV or sale currency than the buyer paid. This can create unbacked currency and corrupt token supply integrity. This issue is fixed in version 1.7.19. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg
Sashiko found that user can cause this WARN_ON_ONCE() easily
with adding a kprobe event based on a raw address with BTF
parameter.
Since this is not an unexpected condition, remove the
WARN_ON_ONCE(). |
| Incorrect calculation in V8 in Google Chrome prior to 151.0.7922.169 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| A wrong lowering instruction in the ARM64 Ion compiler resulted in a wrong optimization result. This vulnerability affects Firefox < 112, Focus for Android < 112, Firefox ESR < 102.10, Firefox for Android < 112, and Thunderbird < 102.10. |
| Incorrect calculation for some Intel(R) TDX Guest software before version 0.3.1 within Ring 3: User Applications may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (low) and availability (low) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 1.0.0-rc.18, user-controlled image n, video seconds and duration, max_tokens, max_completion_tokens, maxOutputTokens, audio duration, and billing-expression quantities can overflow conversions in common/quota_math.go and related settlement paths, allowing a low-privileged account with positive balance or an active subscription to turn a negative charge into account credit and potentially drain upstream funds. This issue is fixed in version 1.0.0-rc.18. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_u32: reject invalid shift counts
u32_match_it() executes rule-supplied shift operands on a 32-bit
value. A malformed u32 rule can provide a shift count of 32 or more,
triggering an undefined shift out-of-bounds during packet evaluation.
Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in
u32_mt_checkentry() and reject malformed rules before they reach the
packet path. |
