| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix bad accounting in __mptcp_subflow_push_pending()
If __subflow_push_pending() errors out we should avoid updating the
copied byte counters, to avoid mismatch push call later on. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-qcom-qspi: Fix incomplete error handling in runtime PM
The runtime PM functions had incomplete error handling that could leave the
system in an inconsistent state. If any operation failed midway through
suspend or resume, some resources would be left in the wrong state while
others were already changed, leading to potential clock/power imbalances.
Reorder the suspend/resume sequences to avoid brownout risk by ensuring the
performance state is set appropriately before clocks are enabled and clocks
are disabled before dropping the performance state.
Fix by adding proper error checking for all operations and using goto-based
cleanup to ensure all successfully acquired resources are properly released
on any error. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: rockchip: rockchip_pdm: Handle runtime PM resume failures in set_fmt
rockchip_pdm_set_fmt() calls pm_runtime_get_sync() before accessing
hardware registers, but ignores its return value.
If the runtime resume fails, the function continues to perform register
accesses while the device state is undefined.
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() and
return early on failure to avoid unpowered register accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Proper rollback if the ioremap fails
bnxt_qplib_alloc_dpi returns success even if ioremap fails.
Add the proper rollback when the ioremap fails and return
-ENOMEM status. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Validate function returns
[WHAT & HOW]
Function return values must be checked before data can be used
in subsequent functions.
This fixes 4 CHECKED_RETURN issues reported by Coverity. |
| This vulnerability enables unauthenticated remote code execution (RCE) on a victim's machine by exploiting a combination of cryptographic weaknesses and memory management issues in the SConnect native host component.
The attack leverages an unrestricted messaging interface between an attacker-controlled web page and the native host, allowing malicious input to bypass security checks. |
| When tarfile extracts a link on a system that doesn't support links, it falls back to extracting a member from the archive. In this case, the filter function is run twice: once for the extracted member, and once with name set to the location of the link. For one of the calls, the return value was ignored. Instead, the member should be skipped if either call returns None. |
| Unchecked return value in Performance in Google Chrome prior to 154.0.8037.57 allowed a local attacker to potentially read memory via a local program. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: propagate reparse index insertion failure
update_reparse_data() ignores the return value of
set_reparse_index(). When index insertion fails, the code removes
the just-written reparse data as cleanup but still returns 0, so
symlink(2) (and WSL special file creation) reports success while
no reparse data exists on disk. When there was no previous reparse
data (oldsize == 0), the failure was likewise silently ignored.
Propagate the error to the caller. |
| Dell Update Package Framework, versions prior to 26.07.03, contains an Unchecked Return Value vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: check nfsd4_acl_to_attr() return value in nfsd4_create()
nfsd4_create() stores the return value of nfsd4_acl_to_attr() in
status, but the switch(create->cr_type) block unconditionally
overwrites it in every branch. ACL translation errors are silently
discarded, and the CREATE proceeds without the requested ACL.
Add an early exit check after nfsd4_acl_to_attr(), matching the
pattern already used in nfsd4_setattr().
[ cel: prefer NFS4ERR_BADTYPE over NFS4ERR_ATTRNOTSUPP ] |
| In the Linux kernel, the following vulnerability has been resolved:
hinic3: Fix skb linearization mismatch and drop skb when skb_checksum_help() failed
Previously, hinic3_send_one_skb() cached the skb fragment count before
calling hinic3_tx_offload(). If hinic3_tx_csum() falls back to
skb_checksum_help() for unsupported tunnel packets, the skb may be
linearized. Continuing to build the TX descriptor with the stale
fragment count leads to a descriptor mismatch, which can trigger
out-of-bounds DMA reads or IOMMU faults.
Furthermore, the old code ignored the return value of skb_checksum_help(),
transmitting corrupted packets with incomplete checksums upon failure.
Fix this by:
1. Moving the hinic3_tx_offload() call before calculating 'num_sge' to
ensure the correct fragment count is used if the SKB is linearized.
2. Propagating skb_checksum_help() errors and returning
HINIC3_TX_OFFLOAD_INVALID to properly drop the skb. |
| Snipe-IT versions <= 8.6.3 (fixed in 8.7.0) do not check the return value of storage write operations in ImageUploadRequest::handleImages(). Because Laravel's default disk mode does not throw on failure, a silently failed Storage::disk('public')->put(...) call still caused the application to delete the previous image via deleteExistingImage() and to reassign and persist the model's image reference to the new filename, destroying the existing image and leaving the database row pointing at a file that was never written. A mirror problem existed in deleteExistingImage(), where a failed Storage::delete() still nulled the model's image field, orphaning the file on disk. The condition is not directly attacker-controlled: it is triggered when any legitimate authenticated user submits an image upload while the storage backend transiently fails (for example an S3 network error, a local filesystem permission problem, or quota exhaustion). The result is unrecoverable loss of the prior image and a durable inconsistency between the database and disk that requires manual reconciliation. All models whose controllers route through ImageUploadRequest::handleImages (assets, asset models, users, companies, manufacturers, locations, categories, suppliers, departments, and other image-carrying models) are affected. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sa2ul - stop probe if context pool creation fails
sa_ul_probe() calls sa_init_mem() to create the DMA pool used for
security context buffers, but ignores its return value. If pool creation
fails, probe still continues with DMA setup, algorithm registration and
child population even though later request setup depends on that pool.
Stop probing when sa_init_mem() fails, and route that failure to the PM
cleanup path without attempting to destroy an uncreated DMA pool. |
| Snipe-IT 8.6.3 and earlier do not check the return value of Storage::put() when writing the signature PNG and the generated acceptance PDF in Account\AcceptanceController::store(). On filesystem drivers that return false instead of throwing on a write failure (for example the local disk with restrictive permissions, S3 with expired credentials, or a storage backend that is out of quota), execution continues into $acceptance->accept(), which sets accepted_at and the signature_filename/eula_filename fields, creates the 'accepted' action-log entry, and dispatches completion notifications even though the evidence files were never stored. The result is an acceptance record marked complete whose supporting evidence files do not exist, yielding a materially incomplete compliance artifact for EULA acknowledgement or equipment-receipt workflows. The condition is triggered when an authenticated user completes an acceptance while the storage backend is silently failing writes; an attacker cannot directly force the storage backend into that state. Fixed in Snipe-IT 8.7.0. |
| undici's WebSocket client crashes the whole Node.js process during the opening handshake when a server responds with a subprotocol that the client never requested. A default WebSocket connection sends no subprotocol, but if the server's 101 response includes a Sec-WebSocket-Protocol header, undici dereferences a null value while checking it against the requested list and throws an uncaught TypeError. Because that code runs inside a microtask with no surrounding error handling, the exception propagates and terminates the process under Node's default behavior, instead of gracefully failing the connection as required by the WebSocket protocol. Any application that opens a WebSocket to an attacker-controlled or compromised server, or over a plaintext connection subject to a machine-in-the-middle, can be crashed remotely without authentication in the default configuration. This affects undici versions from 6.7.0 up to 6.28.1, from 7.0.0 up to 7.29.1, and from 8.0.0 up to 8.10.2. Users should upgrade to undici 6.28.1, 7.29.1, or 8.10.2. |
| wasm2c in WebAssembly wabt through 1.0.41 allows sandbox escape in some situations that primarily involve 32-bit platforms, aka a "table flip" attack. It does not check the return value of calloc() in wasm_rt_allocate_funcref_table() (wasm2c/wasm-rt-impl-tableops.inc). When the funcref table allocation fails, table->data is left NULL while table->size keeps the guest-declared element count; thus, bounds checks still pass and table element accesses resolve to absolute memory addresses (i * sizeof(wasm_rt_funcref_t)). This gives arbitrary read and write of host process memory and - via table.get, table.set, and call_indirect - arbitrary code execution, defeating the isolation that wasm2c exists to provide (a full sandbox escape). wasm2c is used as an in-process sandboxing boundary by RLBox and WasmBoxC, including in Firefox, which compiles the Graphite, Hunspell, Ogg, Expat, and Woff2 libraries via wasm2c to contain untrusted font, media, and XML input. Therefore, sandboxing in these applications is potentially affected. Exploitation requires the funcref table allocation to fail, for example under an address-space limit (RLIMIT_AS), on 32-bit hosts, with vm.overcommit_memory=2, or under memory pressure. On 64-bit Linux with default overcommit the allocation succeeds and the defect is not triggered. The wasm2c memory allocator aborts on calloc failure in the same runtime; the table allocator lacks this abort behavior. This was introduced in commit ab9e0b55 (PR #813). |
| xmlregexp in libxml2 before 2.15.4 has a NULL pointer dereference in xmlRegNewParserCtxt after a strdup failure, i.e., it does not calculate a string length after NULL checking. |
| (Holloway) Chew, Kean Ho's Actualizer v1.2.0 and earlier contains a fail-open password validation vulnerability in the Alpha user and root user password loops of Shell/debian-minbase-install.sh. The installer invokes mkpasswd to generate yescrypt password hashes but does not check the command's return value and unconditionally accepts the result. If mkpasswd fails to generate a yescrypt hash, for example because an incompatible mkpasswd implementation or an environment without yescrypt support is used, the resulting password hash variable can be empty and the build proceeds. The resulting image can therefore contain empty password fields for the root and alpha accounts, potentially permitting passwordless authentication depending on the authentication configuration. |
| In FIPS mode, Libreswan's add_decoded_cert() function calls CERT_ExtractPublicKey() and asserts that the result is not NULL. However, CERT_ExtractPublicKey() returns NULL when public key extraction fails, for example if the RSA exponent is set to 0. A remote attacker can send a malformed X.509 certificate in a CERT payload to trigger the assertion, causing the pluto daemon to abort and restart. Continued exploitation causes a denial of service. No remote code execution is possible. Both IKEv1 and IKEv2 are affected. The vulnerability is only exploitable when both the OS and libreswan are running in FIPS mode and at least one CA certificate is loaded. The CERT payload is processed before peer authentication, so no credentials are needed to exploit this. Configurations using only PreSharedKey (PSK) authentication with no CA certificates loaded in the NSS database are not vulnerable. |
