| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Linksys WRT54G router has "admin" as its default FTP password, which allows remote attackers to access sensitive files including nvram.cfg, a file that lists all HTML documents, and an ELF executable file. |
| The Linksys WRT54G router allows remote attackers to cause a denial of service (device restart) via a long username and password to the FTP interface. |
| Linksys SPA-2102 Phone Adapter 3.3.6 allows remote attackers to cause a denial of service (crash) via a long ping packet ("ping of death"). NOTE: the severity of this issue has been disputed since there are limited attack scenarios. |
| The Cisco Linksys WAG54GS Wireless-G ADSL Gateway with 1.01.03 and earlier firmware has "admin" as its default password for the "admin" account, which makes it easier for remote attackers to obtain access. |
| Multiple cross-site request forgery (CSRF) vulnerabilities on the Cisco Linksys WAG54GS Wireless-G ADSL Gateway with 1.01.03 and earlier firmware allow remote attackers to perform actions as administrators via an arbitrary valid request to an administrative URI, as demonstrated by (1) a Restore Factory Defaults action using the mtenRestore parameter to setup.cgi and (2) creation of a user account using the sysname parameter to setup.cgi. |
| Cross-site request forgery (CSRF) vulnerability in apply.cgi in the Linksys WRT54GL Wireless-G Broadband Router with firmware 4.30.9 allows remote attackers to perform actions as administrators. |
| Multiple buffer overflows in the Marvell wireless driver, as used in Linksys WAP4400N Wi-Fi access point with firmware 1.2.17 on the Marvell 88W8361P-BEM1 chipset, and other products, allow remote 802.11-authenticated users to cause a denial of service (wireless access point crash) and possibly execute arbitrary code via an association request with long (1) rates, (2) extended rates, and unspecified other information elements. |
| Linksys WRT54g firmware 1.00.9 does not require credentials when making configuration changes, which allows remote attackers to modify arbitrary configurations via a direct request to Security.tri, as demonstrated using the SecurityMode and layout parameters, a different issue than CVE-2006-2559. |
| Multiple cross-site scripting (XSS) vulnerabilities on the Cisco Linksys WAG54GS Wireless-G ADSL Gateway with 1.01.03 and earlier firmware allow remote attackers to inject arbitrary web script or HTML via unspecified vectors, a different issue than CVE-2007-3574. |
| Cross-site scripting (XSS) vulnerability on the Linksys WRT300N router with firmware 2.00.20, when Mozilla Firefox or Apple Safari is used, allows remote attackers to inject arbitrary web script or HTML via the dyndns_domain parameter to the default URI. |
| The Marvell driver for the Linksys WAP4400N Wi-Fi access point with firmware 1.2.14 on the Marvell 88W8361P-BEM1 chipset, when WEP mode is enabled, does not properly parse malformed 802.11 frames, which allows remote attackers to cause a denial of service (reboot or hang-up) via a malformed association request containing the WEP flag, as demonstrated by a request that is too short, a different vulnerability than CVE-2008-1144 and CVE-2008-1197. |
| Stack-based buffer overflow in the Broadcom BCMWL5.SYS wireless device driver 3.50.21.10, as used in Cisco Linksys WPC300N Wireless-N Notebook Adapter before 4.100.15.5 and other products, allows remote attackers to execute arbitrary code via an 802.11 response frame containing a long SSID field. |
| PhoneCtrl.exe in Linksys WIP 330 Wireless-G IP Phone 1.00.06A allows remote attackers to cause a denial of service (crash) via a TCP SYN scan, as demonstrated using TCP ports 1-65535 with nmap. |
| The HTTP server in Linksys SPA-921 VoIP Desktop Phone allows remote attackers to cause a denial of service (reboot) via (1) a long URL, or a long (2) username or (3) password during Basic Authentication. |
| The Linksys WAG200G with firmware 1.01.01, WRT54GC 2 with firmware 1.00.7, and WRT54GC 1 with firmware 1.03.0 and earlier allow remote attackers to obtain sensitive information (passwords and configuration data) via a packet to UDP port 916. NOTE: some of these details are obtained from third party information. |
| Due to missing neutralization of special elements, OS commands can be injected via the handshake of a TLS-SRP connection, which are ultimately run as the root user.
This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
| Due to an improperly configured firewall rule, the router will accept any connection on the WAN port with the source port 5222, exposing all services which are normally only accessible through the local network.
This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Linksys MR9600, Linksys MX4200 allows that contents of a USB drive partition can be mounted in an arbitrary location of the file system. This may result in the execution of shell scripts in the context of a root user.This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
| Due to missing authentication, a user with physical access to the device can misuse the mesh functionality for adding a new mesh device to the network
to gain access to sensitive information, including the password for admin access to the web interface and the Wi-Fi passwords.This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
| Due to improper neutralization of special elements, SQL statements can be injected via the handshake of a TLS-SRP connection. This can be used to inject known credentials into the database that can be utilized to successfully complete the handshake and use the protected service.
This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
