| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: Applications performing certificate name checks (e.g., TLS
clients checking server certificates) may attempt to read an invalid memory
address resulting in abnormal termination of the application process.
Impact summary: Abnormal termination of an application can a cause a denial of
service.
Applications performing certificate name checks (e.g., TLS clients checking
server certificates) may attempt to read an invalid memory address when
comparing the expected name with an `otherName` subject alternative name of an
X.509 certificate. This may result in an exception that terminates the
application program.
Note that basic certificate chain validation (signatures, dates, ...) is not
affected, the denial of service can occur only when the application also
specifies an expected DNS name, Email address or IP address.
TLS servers rarely solicit client certificates, and even when they do, they
generally don't perform a name check against a reference identifier (expected
identity), but rather extract the presented identity after checking the
certificate chain. So TLS servers are generally not affected and the severity
of the issue is Moderate.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| The UNIX editor Vim prior to version 9.1.0678 has a use-after-free error in argument list handling. When adding a new file to the argument list, this triggers `Buf*` autocommands. If in such an autocommand the buffer that was just opened is closed (including the window where it is shown), this causes the window structure to be freed which contains a reference to the argument list that we are actually modifying. Once the autocommands are completed, the references to the window and argument list are no longer valid and as such cause an use-after-free. Impact is low since the user must either intentionally add some unusual autocommands that wipe a buffer during creation (either manually or by sourcing a malicious plugin), but it will crash Vim. The issue has been fixed as of Vim patch v9.1.0678. |
| When switching to other buffers using the :all command and visual mode still being active, this may cause a heap-buffer overflow, because Vim does not properly end visual mode and therefore may try to access beyond the end of a line in a buffer. In Patch 9.1.1003 Vim will correctly reset the visual mode before opening other windows and buffers and therefore fix this bug. In addition it does verify that it won't try to access a position if the position is greater than the corresponding buffer line. Impact is medium since the user must have switched on visual mode when executing the :all ex command. The Vim project would like to thank github user gandalf4a for reporting this issue. The issue has been fixed as of Vim patch v9.1.1003 |
| A vulnerability was found in the Linux kernel’s cgroup_release_agent_write in the kernel/cgroup/cgroup-v1.c function. This flaw, under certain circumstances, allows the use of the cgroups v1 release_agent feature to escalate privileges and bypass the namespace isolation unexpectedly. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Libraries). Supported versions that are affected are Oracle Java SE: 7u331, 8u321, 11.0.14, 17.0.2, 18; Oracle GraalVM Enterprise Edition: 20.3.5, 21.3.1 and 22.0.0.2. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Java SE, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability can also be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| A buffer overflow was discovered in the GNU C Library's dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges. |
| The Closest Encloser Proof aspect of the DNS protocol (in RFC 5155 when RFC 9276 guidance is skipped) allows remote attackers to cause a denial of service (CPU consumption for SHA-1 computations) via DNSSEC responses in a random subdomain attack, aka the "NSEC3" issue. The RFC 5155 specification implies that an algorithm must perform thousands of iterations of a hash function in certain situations. |
| eventlet before 0.35.2, as used in dnspython before 2.6.0, allows remote attackers to interfere with DNS name resolution by quickly sending an invalid packet from the expected IP address and source port, aka a "TuDoor" attack. In other words, dnspython does not have the preferred behavior in which the DNS name resolution algorithm would proceed, within the full time window, in order to wait for a valid packet. NOTE: dnspython 2.6.0 is unusable for a different reason that was addressed in 2.6.1. |
| Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.1, from 10.1.0-M1 through 10.1.33, from 9.0.0.M1 through 9.0.97.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions
may also be affected.
The mitigation for CVE-2024-50379 was incomplete.
Users running Tomcat on a case insensitive file system with the default servlet write enabled (readonly initialisation
parameter set to the non-default value of false) may need additional configuration to fully mitigate CVE-2024-50379 depending on which version of Java they are using with Tomcat:
- running on Java 8 or Java 11: the system property sun.io.useCanonCaches must be explicitly set to false (it defaults to true)
- running on Java 17: the system property sun.io.useCanonCaches, if set, must be set to false (it defaults to false)
- running on Java 21 onwards: no further configuration is required (the system property and the problematic cache have been removed)
Tomcat 11.0.3, 10.1.35 and 9.0.99 onwards will include checks that sun.io.useCanonCaches is set appropriately before allowing the default servlet to be write enabled on a case insensitive file system. Tomcat will also set sun.io.useCanonCaches to false by default where it can. |
| Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability during JSP compilation in Apache Tomcat permits an RCE on case insensitive file systems when the default servlet is enabled for write (non-default configuration).
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.1, from 10.1.0-M1 through 10.1.33, from 9.0.0.M1 through 9.0.97.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected.
Users are recommended to upgrade to version 11.0.2, 10.1.34 or 9.0.98, which fixes the issue. |
| Vim is an open source, command line text editor. A use-after-free was found in Vim < 9.1.0764. When closing a buffer (visible in a window) a BufWinLeave auto command can cause an use-after-free if this auto command happens to re-open the same buffer in a new split window. Impact is low since the user must have intentionally set up such a strange auto command and run some buffer unload commands. However this may lead to a crash. This issue has been addressed in version 9.1.0764 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| REXML is an XML toolkit for Ruby. The REXML gem before 3.3.6 has a DoS vulnerability when it parses an XML that has many deep elements that have same local name attributes. If you need to parse untrusted XMLs with tree parser API like REXML::Document.new, you may be impacted to this vulnerability. If you use other parser APIs such as stream parser API and SAX2 parser API, this vulnerability is not affected. The REXML gem 3.3.6 or later include the patch to fix the vulnerability. |
| REXML is an XML toolkit for Ruby. The REXML gem before 3.3.1 has some DoS vulnerabilities when it parses an XML that has many specific characters such as `<`, `0` and `%>`. If you need to parse untrusted XMLs, you many be impacted to these vulnerabilities. The REXML gem 3.3.2 or later include the patches to fix these vulnerabilities. Users are advised to upgrade. Users unable to upgrade should avoid parsing untrusted XML strings. |
| iPerf3 before 3.17, when used with OpenSSL before 3.2.0 as a server with RSA authentication, allows a timing side channel in RSA decryption operations. This side channel could be sufficient for an attacker to recover credential plaintext. It requires the attacker to send a large number of messages for decryption, as described in "Everlasting ROBOT: the Marvin Attack" by Hubert Kario. |
| Vulnerability in Oracle Java SE (component: Compiler). Supported versions that are affected are Oracle Java SE: 21.0.6, 24; Oracle GraalVM for JDK: 21.0.6 and 24. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE accessible data as well as unauthorized read access to a subset of Oracle Java SE accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 4.8 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N). |
| There exists a security vulnerability in Jetty's DosFilter which can be exploited by unauthorized users to cause remote denial-of-service (DoS) attack on the server using DosFilter. By repeatedly sending crafted requests, attackers can trigger OutofMemory errors and exhaust the server's memory finally. |
| Uncontrolled Resource Consumption vulnerability in the examples web application provided with Apache Tomcat leads to denial of service.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.1, from 10.1.0-M1 through 10.1.33, from 9.0.0.M1 through 9.9.97.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions
may also be affected.
Users are recommended to upgrade to version 11.0.2, 10.1.34 or 9.0.98, which fixes the issue. |
| Path Equivalence: 'file.Name' (Internal Dot) leading to Remote Code Execution and/or Information disclosure and/or malicious content added to uploaded files via write enabled Default Servlet in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.2, from 10.1.0-M1 through 10.1.34, from 9.0.0.M1 through 9.0.98.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions
may also be affected.
If all of the following were true, a malicious user was able to view security sensitive files and/or inject content into those files:
- writes enabled for the default servlet (disabled by default)
- support for partial PUT (enabled by default)
- a target URL for security sensitive uploads that was a sub-directory of a target URL for public uploads
- attacker knowledge of the names of security sensitive files being uploaded
- the security sensitive files also being uploaded via partial PUT
If all of the following were true, a malicious user was able to perform remote code execution:
- writes enabled for the default servlet (disabled by default)
- support for partial PUT (enabled by default)
- application was using Tomcat's file based session persistence with the default storage location
- application included a library that may be leveraged in a deserialization attack
Users are recommended to upgrade to version 11.0.3, 10.1.35 or 9.0.99, which fixes the issue. |
| GRUB2 does not call the module fini functions on exit, leading to Debian/Ubuntu's peimage GRUB2 module leaving UEFI system table hooks after exit. This lead to a use-after-free condition, and could possibly lead to secure boot bypass. |
| Vim is an open source command line text editor. When performing a search and displaying the search-count message is disabled (:set shm+=S), the search pattern is displayed at the bottom of the screen in a buffer (msgbuf). When right-left mode (:set rl) is enabled, the search pattern is reversed. This happens by allocating a new buffer. If the search pattern contains some ASCII NUL characters, the buffer allocated will be smaller than the original allocated buffer (because for allocating the reversed buffer, the strlen() function is called, which only counts until it notices an ASCII NUL byte ) and thus the original length indicator is wrong. This causes an overflow when accessing characters inside the msgbuf by the previously (now wrong) length of the msgbuf. The issue has been fixed as of Vim patch v9.1.0689. |
