| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: mesh: release the channel if start fails
ieee80211_join_mesh() acquires a channel context and then calls
ieee80211_start_mesh(), which can fail. In that case, the chanctx
isn't released then interface removal will attempt to unassign it
after it's removed from the driver, hitting:
wlan0: Failed check-sdata-in-driver check, flags: 0x0
WARNING: net/mac80211/driver-ops.c:366 at drv_unassign_vif_chanctx
ieee80211_assign_link_chanctx
__ieee80211_link_release_channel
ieee80211_link_release_channel
ieee80211_teardown_sdata
unregister_netdevice_many_notify
_cfg80211_unregister_wdev
ieee80211_remove_interfaces
ieee80211_unregister_hw
mac80211_hwsim_del_radio
hwsim_exit_net
Correctly release the channel on start failures. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: fix typec switch leak on probe error path
If probe fails after imx95_usb_phy_get_tca() succeeds, the typec
switch leaks because the only cleanup path was in .remove(), which
never runs on probe failure.
Use devm_add_action_or_reset() so the switch is cleaned up on both
probe failure and driver removal. The imx95_usb_phy_put_tca() is no
longer needed, it will be removed in .remove() too. |
| An issue was discovered in Django 6.1 before 6.1.2, 6.0 before 6.0.9, and 5.2 before 5.2.18.
`django.utils.translation.get_supported_language_variant()` is subject to
a potential denial-of-service attack when processing many distinct, very long
language codes, which are retained as keys in an in-memory cache and
consume process memory.
Earlier, unsupported Django series (such as 5.1.x, 5.0.x, and 4.2.x) were not evaluated and may also be affected.
Django would like to thank Gleb Lizunov for reporting this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-of-aspeed: Remove children before releasing SDC resources
Probe failure and removal leave SDHCI child devices registered after the
parent clock and managed resources are released.
Unregister the OF children in reverse order before disabling the parent
clock on both paths. Use of_platform_device_destroy() because manual
child creation does not set the flag required by of_platform_depopulate().
This issue was identified during our ongoing static-analysis research
while reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Unify scc_index when finalising SCC in __unix_walk_scc().
Commit bfdb01283ee8 ("af_unix: Assign a unique index to SCC.")
changed Tarjan's algorithm to update lowlink with lowlink,
which is called lowpoint (unix_vertex.scc_index).
unix_vertex_dead() assumes all vertices in an SCC share the same
lowpoint, but this is not always true if an SCC has two or more
back edges, depending on the order of DFS.
For example, the graph below has two back edges from B to A
and from C to B.
A --> B --> C
^ | ^ |
`----' `----'
If DFS walks through A -> B -> C -> B (-> C -> B) -> A (-> B -> A),
each index and scc_index will be updated as follows.
A --> B --> C C = (3, 3) (index, scc_index)
B = (2, 2)
A = (1, 1)
A ... B ... C C = (3, 2)<-.
^ | B = (2, 2) -'
`----' A = (1, 1)
A ... B ... C C = (3, 2)
^ | . . B = (2, 1)<-.
`----' .... A = (1, 1) -'
Then, unix_vertex_dead() thinks that B is passed to another
SCC with scc_index 2, and the SCC is not garbage-collected.
This does not happen if DFS walks in a different order below
or starts from B.
1 3
A --> B --> C
^ | ^ |
`----' `----'
2 4
Let's unify scc_index across the SCC when finalising it.
Note that updating v->index was previously done in unix_scc_dead(),
when called from __unix_walk_scc(), just to save one loop. Since
__unix_walk_scc() now iterates over the SCC anyway, the update is
moved back to __unix_walk_scc() and 'fast' argument is dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs-clt: Fix CQ pool leak when connect is interrupted
The client borrows shared CQ credits in the ADDR_RESOLVED handler via
ib_cq_pool_get(), before the peer is connected. create_cm() can return
-ERESTARTSYS from wait_event_interruptible_timeout() without destroying
the CM ID. The init_conns() and stop-and-destroy paths then call
destroy_con_cq_qp() while cq is still NULL (no PUT) and only afterwards
rdma_destroy_id().
CMA serializes the handler against rdma_destroy_id() with handler_mutex,
but that does not order the GET against destroy_con_cq_qp(). If
ADDR_RESOLVED has already passed the DESTROYING check, it can take
con_mutex, GET credits, and then lose the con to kfree. Device
unregister later hits WARN_ON(cq->cqe_used) in ib_cq_pool_cleanup().
Set a per-connection flag under con_mutex before CQ/QP teardown so a
racing ADDR_RESOLVED cannot borrow credits after teardown has begun. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: clear RX owner on VNET header error
Commit 61fad6816fc1 ("net/packet: tpacket_rcv: avoid a producer race
condition") added rx_owner_map and made tpacket_rcv() claim a V1 or V2
ring slot before converting the virtio-net header. If the conversion
fails, the drop path leaves the slot claimed.
With a one-frame TPACKET_V2 ring, an unsupported UDP GSO packet leaves
the only slot unavailable, so the ring also drops the next valid packet.
Clear the ownership bit on this error path. TPACKET_V3 already clears
its block state here. |
| Subscriber Denial of Service Attack in WPBase Cache <= 5.5.6 versions. |
| IBM Financial Transaction Manager (FTM) for RedHat OpenShift could allow a remote authenticated attacker to falsify transaction audit logs due to improper validation of a client-supplied HTTP header. |
| IBM Financial Transaction Manager (FTM) for RedHat OpenShift could allow a remote attacker to cause a denial of service due to allocation of resources without limits or throttling. |
| An uncontrolled resource consumption vulnerability in the Fireware OS login process (wgagent) allows a remote, unauthenticated attacker to cause a denial of service by sending a specially crafted request. |
| A flaw was found in SSSD. In configurations where the autofs responder service is enabled, memory allocated during successful request processing is not released until the client connection terminates. A local attacker can exploit this vulnerability by maintaining an open connection and repeatedly submitting valid requests, leading to memory exhaustion and a Denial of Service (DoS). |
| Allocation of resources without limits in password-based private-key decryption (PbeUtilities.GenerateCipherParameters) in Legion of the Bouncy Castle Inc. bc-csharp before 2.7.0 allows an attacker who can supply an encrypted private key, such as a PKCS#8 EncryptedPrivateKeyInfo or "ENCRYPTED PRIVATE KEY" PEM file, to cause a denial of service through CPU exhaustion via an iteration count close to 2^31, because the count is taken from the unauthenticated algorithm parameters without an upper bound and the key derivation runs before the password or the data can be checked. PKCS#5 PBES1 and PBES2 (PBKDF2), the PKCS#12 PBE algorithms and CMS password recipients (CmsPbeKey) are affected. Loading PKCS#12 files with Pkcs12Store is covered by CVE-2026-63572, and a zero or negative count with the PKCS#12 algorithms by CVE-2026-63575. |
| Vim is an open source, command line text editor. Prior to 9.2.0840, runtime/plugin/netrwPlugin.vim loads netrw and runtime/pack/dist/opt/netrw/autoload/netrw.vim constructs Bookmarks, History, and Targets menu entries by interpolating attacker-controlled directory paths into executed :menu commands. s:NetrwBookmarkMenu(), s:NetrwTgtMenu(), g:netrw_menu_escape, EX_TRLBAR, and netrw#MakeTgt() fail to neutralize the | command separator or single quotes at five construction sites, allowing a crafted path browsed or bookmarked in GUI Vim to execute arbitrary Ex and operating-system commands. This issue is fixed in version 9.2.0840. |
| Penpot is an open-source design and prototyping platform. Prior to 2.18.0, the chunked media upload RPC validates that a chunk index is in range but neither rejects an already stored index nor replaces its previous object. An authenticated user can repeatedly upload the same valid index, causing each successful request to allocate another temporary object and increasing stored bytes beyond the upload session's declared logical size. Assembly detects the inconsistent chunk count only after allocation. This issue is fixed in version 2.18.0. |
| Seroval facilitates JS value stringification, including complex structures beyond JSON.stringify capabilities. Prior to 1.6.3, deserializeTypedArray in fromJSON and fromCrossJSON trusts a deserialized source value as an ArrayBuffer and does not bound the serialized element count. An attacker can provide a small untrusted JSON object with a large length value, causing the array-like TypedArray constructor to synchronously allocate the selected number of elements and exhaust CPU or memory while starving the event loop. The offset check does not reject the crafted source because source.byteLength is undefined. DataView reaches a similar unchecked cast but throws rather than allocating, and the issue has no identified confidentiality or integrity impact. This issue is fixed in version 1.6.3. |
| A flaw was found in Undertow where malformed client requests can trigger server-side stream resets without triggering abuse counters. This issue, referred to as the "MadeYouReset" attack, allows malicious clients to induce excessive server workload by repeatedly causing server-side stream aborts. While not a protocol bug, this highlights a common implementation weakness that can be exploited to cause a denial of service (DoS). |
| Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead denial of service via Excessive Allocation (CAPEC-130) |
| js-yaml is a JavaScript YAML parser and dumper. Prior to 3.15.1, 4.3.1, and 5.2.1, YAML11_SCHEMA support for the !!omap tag in src/tag/sequence/omap.ts uses omapTag.addItem() to perform a linear duplicate-key scan on every insertion, causing O(n^2) CPU consumption when yaml.load() parses a crafted ordered-map document. In v3 and v4, !!omap is active and exploitable by default. v5 doesn't use !!omap by default, and the chances of activating it are very low.This issue is fixed in 3.15.1, 4.3.1, and 5.2.1. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix the possible bioc_list memory leak during error
There are two possible ways to leak bioc memory on
btrfs_ordered_extent::bioc_list:
- An error occurred for btrfs_insert_one_raid_extent()
Then the function btrfs_insert_raid_extent() immediately return
without freeing any bioc in the bioc_list.
- An ordered extent hit an IO error
In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and
skip the call on btrfs_insert_raid_extent() completely.
Fix the problem by:
- Introduce a new helper, btrfs_cleanup_ordered_bioc_list()
Which will remove all bioc from the bioc_list, and release the bioc.
- Call the above helper for btrfs_insert_raid_extent()
So that the cleanup helper is always called no matter what.
- Call the above helper for btrfs_finish_one_ordered()
This is called just before the final release on the ordered extent.
This was reported by Sashiko when reviewing another patch. |
