| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: reject immediate NF_QUEUE verdict
nft_queue is always used from userspace nftables to deliver the NF_QUEUE
verdict. Immediately emitting an NF_QUEUE verdict is never used by the
userspace nft tools, so reject immediate NF_QUEUE verdicts.
The arp family does not provide queue support, but such an immediate
verdict is still reachable. Globally reject NF_QUEUE immediate verdicts
to address this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-adc161s626: use DMA-safe memory for spi_read()
Add a DMA-safe buffer and use it for spi_read() instead of a stack
memory. All SPI buffers must be DMA-safe.
Since we only need up to 3 bytes, we just use a u8[] instead of __be16
and __be32 and change the conversion functions appropriately. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: br_nd_send: validate ND option lengths
br_nd_send() walks ND options according to option-provided lengths.
A malformed option can make the parser advance beyond the computed
option span or use a too-short source LLADDR option payload.
Validate option lengths against the remaining NS option area before
advancing, and only read source LLADDR when the option is large enough
for an Ethernet address. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ftgmac100: fix ring allocation unwind on open failure
ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and
rx_scratch in stages. On intermediate failures it returned -ENOMEM
directly, leaking resources allocated earlier in the function.
Rework the failure path to use staged local unwind labels and free
allocated resources in reverse order before returning -ENOMEM. This
matches common netdev allocation cleanup style. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use check_add_overflow() to prevent u16 DACL size overflow
set_posix_acl_entries_dacl() and set_ntacl_dacl() accumulate ACE sizes
in u16 variables. When a file has many POSIX ACL entries, the
accumulated size can wrap past 65535, causing the pointer arithmetic
(char *)pndace + *size to land within already-written ACEs. Subsequent
writes then overwrite earlier entries, and pndacl->size gets a
truncated value.
Use check_add_overflow() at each accumulation point to detect the
wrap before it corrupts the buffer, consistent with existing
check_mul_overflow() usage elsewhere in smbacl.c. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: reject oversized dirents in page cache
fuse_add_dirent_to_cache() computes a serialized dirent size from the
server-controlled namelen field and copies the dirent into a single
page-cache page. The existing logic only checks whether the dirent fits
in the remaining space of the current page and advances to a fresh page
if not. It never checks whether the dirent itself exceeds PAGE_SIZE.
As a result, a malicious FUSE server can return a dirent with
namelen=4095, producing a serialized record size of 4120 bytes. On 4 KiB
page systems this causes memcpy() to overflow the cache page by 24 bytes
into the following kernel page.
Reject dirents that cannot fit in a single page before copying them into
the readdir cache. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_multiport: validate range encoding in checkentry
ports_match_v1() treats any non-zero pflags entry as the start of a
port range and unconditionally consumes the next ports[] element as
the range end.
The checkentry path currently validates protocol, flags and count, but
it does not validate the range encoding itself. As a result, malformed
rules can mark the last slot as a range start or place two range starts
back to back, leaving ports_match_v1() to step past the last valid
ports[] element while interpreting the rule.
Reject malformed multiport v1 rules in checkentry by validating that
each range start has a following element and that the following element
is not itself marked as another range start. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rfkill: prevent unlimited numbers of rfkill events from being created
Userspace can create an unlimited number of rfkill events if the system
is so configured, while not consuming them from the rfkill file
descriptor, causing a potential out of memory situation. Prevent this
from bounding the number of pending rfkill events at a "large" number
(i.e. 1000) to prevent abuses like this. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: clear trailing padding in build_polexpire()
build_expire() clears the trailing padding bytes of struct
xfrm_user_expire after setting the hard field via memset_after(),
but the analogous function build_polexpire() does not do this for
struct xfrm_user_polexpire.
The padding bytes after the __u8 hard field are left
uninitialized from the heap allocation, and are then sent to
userspace via netlink multicast to XFRMNLGRP_EXPIRE listeners,
leaking kernel heap memory contents.
Add the missing memset_after() call, matching build_expire(). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU: Fix FPDSS on Zen1
Zen1's hardware divider can leave, under certain circumstances, partial
results from previous operations. Those results can be leaked by
another, attacker thread.
Fix that with a chicken bit. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: clamp report_size in s32ton() to avoid undefined shift
s32ton() shifts by n-1 where n is the field's report_size, a value that
comes directly from a HID device. The HID parser bounds report_size
only to <= 256, so a broken HID device can supply a report descriptor
with a wide field that triggers shift exponents up to 256 on a 32-bit
type when an output report is built via hid_output_field() or
hid_set_field().
Commit ec61b41918587 ("HID: core: fix shift-out-of-bounds in
hid_report_raw_event") added the same n > 32 clamp to the function
snto32(), but s32ton() was never given the same fix as I guess syzbot
hadn't figured out how to fuzz a device the same way.
Fix this up by just clamping the max value of n, just like snto32()
does. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
The block_len read from the host-supplied NTB header is checked against
ntb_max but has no lower bound. When block_len is smaller than
opts->ndp_size, the bounds check of:
ndp_index > (block_len - opts->ndp_size)
will underflow producing a huge unsigned value that ndp_index can never
exceed, defeating the check entirely.
The same underflow occurs in the datagram index checks against block_len
- opts->dpe_size. With those checks neutered, a malicious USB host can
choose ndp_index and datagram offsets that point past the actual
transfer, and the skb_put_data() copies adjacent kernel memory into the
network skb.
Fix this by rejecting block lengths that cannot hold at least the NTB
header plus one NDP. This will make block_len - opts->ndp_size and
block_len - opts->dpe_size both well-defined.
Commit 8d2b1a1ec9f5 ("CDC-NCM: avoid overflow in sanity checking") fixed
a related class of issues on the host side of NCM. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate EaNameLength in smb2_get_ea()
smb2_get_ea() reads ea_req->EaNameLength from the client request and
passes it directly to strncmp() as the comparison length without
verifying that the length of the name really is the size of the input
buffer received.
Fix this up by properly checking the size of the name based on the value
received and the overall size of the request, to prevent a later
strncmp() call to use the length as a "trusted" size of the buffer.
Without this check, uninitialized heap values might be slowly leaked to
the client. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require 3 sub-authorities before reading sub_auth[2]
parse_dacl() compares each ACE SID against sid_unix_NFS_mode and on
match reads sid.sub_auth[2] as the file mode. If sid_unix_NFS_mode is
the prefix S-1-5-88-3 with num_subauth = 2 then compare_sids() compares
only min(num_subauth, 2) sub-authorities so a client SID with
num_subauth = 2 and sub_auth = {88, 3} will match.
If num_subauth = 2 and the ACE is placed at the very end of the security
descriptor, sub_auth[2] will be 4 bytes past end_of_acl. The
out-of-band bytes will then be masked to the low 9 bits and applied as
the file's POSIX mode, probably not something that is good to have
happen.
Fix this up by forcing the SID to actually carry a third sub-authority
before reading it at all. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: Use dev_consume_skb_any() to free TX SKBs
The napi_consume_skb() function is not intended to be called in an IRQ
disabled context. However, after commit 6bc8a5098bf4 ("net: macb: Fix
tx_ptr_lock locking"), the freeing of TX SKBs is performed with IRQs
disabled. To resolve the following call trace, use dev_consume_skb_any()
for freeing TX SKBs:
WARNING: kernel/softirq.c:430 at __local_bh_enable_ip+0x174/0x188, CPU#0: ksoftirqd/0/15
Modules linked in:
CPU: 0 UID: 0 PID: 15 Comm: ksoftirqd/0 Not tainted 7.0.0-rc4-next-20260319-yocto-standard-dirty #37 PREEMPT
Hardware name: ZynqMP ZCU102 Rev1.1 (DT)
pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __local_bh_enable_ip+0x174/0x188
lr : local_bh_enable+0x24/0x38
sp : ffff800082b3bb10
x29: ffff800082b3bb10 x28: ffff0008031f3c00 x27: 000000000011ede0
x26: ffff000800a7ff00 x25: ffff800083937ce8 x24: 0000000000017a80
x23: ffff000803243a78 x22: 0000000000000040 x21: 0000000000000000
x20: ffff000800394c80 x19: 0000000000000200 x18: 0000000000000001
x17: 0000000000000001 x16: ffff000803240000 x15: 0000000000000000
x14: ffffffffffffffff x13: 0000000000000028 x12: ffff000800395650
x11: ffff8000821d1528 x10: ffff800081c2bc08 x9 : ffff800081c1e258
x8 : 0000000100000301 x7 : ffff8000810426ec x6 : 0000000000000000
x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000
x2 : 0000000000000008 x1 : 0000000000000200 x0 : ffff8000810428dc
Call trace:
__local_bh_enable_ip+0x174/0x188 (P)
local_bh_enable+0x24/0x38
skb_attempt_defer_free+0x190/0x1d8
napi_consume_skb+0x58/0x108
macb_tx_poll+0x1a4/0x558
__napi_poll+0x50/0x198
net_rx_action+0x1f4/0x3d8
handle_softirqs+0x16c/0x560
run_ksoftirqd+0x44/0x80
smpboot_thread_fn+0x1d8/0x338
kthread+0x120/0x150
ret_from_fork+0x10/0x20
irq event stamp: 29751
hardirqs last enabled at (29750): [<ffff8000813be184>] _raw_spin_unlock_irqrestore+0x44/0x88
hardirqs last disabled at (29751): [<ffff8000813bdf60>] _raw_spin_lock_irqsave+0x38/0x98
softirqs last enabled at (29150): [<ffff8000800f1aec>] handle_softirqs+0x504/0x560
softirqs last disabled at (29153): [<ffff8000800f2fec>] run_ksoftirqd+0x44/0x80 |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Clear stale exiting pointer in futex_lock_pi() retry path
Fuzzying/stressing futexes triggered:
WARNING: kernel/futex/core.c:825 at wait_for_owner_exiting+0x7a/0x80, CPU#11: futex_lock_pi_s/524
When futex_lock_pi_atomic() sees the owner is exiting, it returns -EBUSY
and stores a refcounted task pointer in 'exiting'.
After wait_for_owner_exiting() consumes that reference, the local pointer
is never reset to nil. Upon a retry, if futex_lock_pi_atomic() returns a
different error, the bogus pointer is passed to wait_for_owner_exiting().
CPU0 CPU1 CPU2
futex_lock_pi(uaddr)
// acquires the PI futex
exit()
futex_cleanup_begin()
futex_state = EXITING;
futex_lock_pi(uaddr)
futex_lock_pi_atomic()
attach_to_pi_owner()
// observes EXITING
*exiting = owner; // takes ref
return -EBUSY
wait_for_owner_exiting(-EBUSY, owner)
put_task_struct(); // drops ref
// exiting still points to owner
goto retry;
futex_lock_pi_atomic()
lock_pi_update_atomic()
cmpxchg(uaddr)
*uaddr ^= WAITERS // whatever
// value changed
return -EAGAIN;
wait_for_owner_exiting(-EAGAIN, exiting) // stale
WARN_ON_ONCE(exiting)
Fix this by resetting upon retry, essentially aligning it with requeue_pi. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: Fix wildcard bind conflict check when using hash2
When binding a udp_sock to a local address and port, UDP uses
two hashes (udptable->hash and udptable->hash2) for collision
detection. The current code switches to "hash2" when
hslot->count > 10.
"hash2" is keyed by local address and local port.
"hash" is keyed by local port only.
The issue can be shown in the following bind sequence (pseudo code):
bind(fd1, "[fd00::1]:8888")
bind(fd2, "[fd00::2]:8888")
bind(fd3, "[fd00::3]:8888")
bind(fd4, "[fd00::4]:8888")
bind(fd5, "[fd00::5]:8888")
bind(fd6, "[fd00::6]:8888")
bind(fd7, "[fd00::7]:8888")
bind(fd8, "[fd00::8]:8888")
bind(fd9, "[fd00::9]:8888")
bind(fd10, "[fd00::10]:8888")
/* Correctly return -EADDRINUSE because "hash" is used
* instead of "hash2". udp_lib_lport_inuse() detects the
* conflict.
*/
bind(fail_fd, "[::]:8888")
/* After one more socket is bound to "[fd00::11]:8888",
* hslot->count exceeds 10 and "hash2" is used instead.
*/
bind(fd11, "[fd00::11]:8888")
bind(fail_fd, "[::]:8888") /* succeeds unexpectedly */
The same issue applies to the IPv4 wildcard address "0.0.0.0"
and the IPv4-mapped wildcard address "::ffff:0.0.0.0". For
example, if there are existing sockets bound to
"192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or
"[::ffff:0.0.0.0]:8888" can also miss the conflict when
hslot->count > 10.
TCP inet_csk_get_port() already has the correct check in
inet_use_bhash2_on_bind(). Rename it to
inet_use_hash2_on_bind() and move it to inet_hashtables.h
so udp.c can reuse it in this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_expect: skip expectations in other netns via proc
Skip expectations that do not reside in this netns.
Similar to e77e6ff502ea ("netfilter: conntrack: do not dump other netns's
conntrack entries via proc"). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: use netlink policy range checks
Replace manual range and mask validations with netlink policy
annotations in ctnetlink code paths, so that the netlink core rejects
invalid values early and can generate extack errors.
- CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at
policy level, removing the manual >= TCP_CONNTRACK_MAX check.
- CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE
(14). The normal TCP option parsing path already clamps to this value,
but the ctnetlink path accepted 0-255, causing undefined behavior when
used as a u32 shift count.
- CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with
CTA_FILTER_F_ALL, removing the manual mask checks.
- CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding
a new mask define grouping all valid expect flags.
Extracted from a broader nf-next patch by Florian Westphal, scoped to
ctnetlink for the fixes tree. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: drop logically empty buckets in mtype_del
mtype_del() counts empty slots below n->pos in k, but it only drops the
bucket when both n->pos and k are zero. This misses buckets whose live
entries have all been removed while n->pos still points past deleted slots.
Treat a bucket as empty when all positions below n->pos are unused and
release it directly instead of shrinking it further. |
