| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Heap-based buffer overflow in Windows Spaceport.sys allows an authorized attacker to execute code locally. |
| Remote Code Execution in Windows Routing and Remote Access Service (RRAS) allows attacker to gain an unauthorized access to victim's machine |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Size page table preallocation by device address
Commit 0a8224058a58 ("drm/imagination: Fix page count for page table for
map() interface") passed the device address to
pvr_mmu_op_context_create(), but the preallocation is still sized from
device_addr + sgt_offset with an exclusive end. The offset into the
object's pages has no place in a device-virtual range, and the exclusive
end allocates one table too many when the range ends on a table
boundary.
Count the tables from device_addr and the inclusive end of the range.
The new calculation does not take page table indices into account. This
fixes another issue with the previous implementation, where the
difference between start and end indices could underflow when a mapping
crossed a page table boundary. This would lead to the driver
preallocating a huge number of MMU pages, exhausting system memory and
triggering an out of memory panic.
[Alessio: add paragraph to point out OOM bug being fixed, cc stable] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: Unmask interrupts only when ACTIVE is true
There is a small race window between intel_rps_boost() reading
a stale ACTIVE state and queuing rps->work, where ACTIVE may be
changed via asynchronous calls triggered by wakeref drop.
This means that rps_work() could be triggered after the GT has
been parked, so unmasking RPS PM interrupts would happen without
holding PM wakelock. This sequence of events may be observed
during live_rc6_ctx_wa() selftest:
1) live_rc6_ctx_wa()
-> intel_engine_pm_put()
-> wakeref_put()
ASYNC1) wakeref_put() callback
-> __engine_park()
-> intel_gt_pm_put_async()
-> intel_gt_pm_put_async_untracked()
-> intel_wakeref_put_async()
ASYNC2) wakeref_put_async() callback
-> __gt_park()
-> intel_rps_park()
-> intel_rps_clear_active() [clear ACTIVE]
WITH INTERRUPTS:
-> rps_disable_interrupts()
-> cancel_work_sync(rps->work)
-> rps_reset_interrupts() [rps->pm_iir = 0]
WITHOUT INTERRUPTS (TIMER mode):
-> rps_stop_timer()
-> cancel_work_sync(rps->work)
2) live_rc6_ctx_wa()
-> intel_gt_wait_for_idle()
-> intel_gt_retire_requests_timeout()
-> dma_fence_wait_timeout()
-> ops->wait() [i915_fence_wait()]
-> i915_request_wait_timeout()
-> intel_rps_boost()
-> intel_rps_is_active() [check ACTIVE]
[OPEN RACE WINDOW]
-> queue_work(rps->work)
-> retire_requests()
-> i915_request_retire()
-> intel_rps_dec_waiters() [from 1 to 0]
If ASYNC1 and ASYNC2 would execute during [OPEN RACE WINDOW],
then:
3) rps_work() executes from the workqueue and may satisfy
"(!pm_iir && !client_boost)" test (in TIMER mode rps->pm_iir
is zeroed by an earlier rps_work() call or never gets a new
value after previous intel_rps_unpark() event), so it jumps
to "out" label, bypassing intel_rps_is_active() guard and
executes gen6_gt_pm_unmask_irq();
4) GT is parked and runtime PM wakelock is dropped, so only
a raw reference in __gt_park() ->
intel_display_power_put_async() remains for 100ms, then the
MMIO write in gen6_gt_pm_unmask_irq() detects missing
wakelock via assert_rpm_wakelock_held() and emits
"RPM wakelock ref not held during HW access" tainting kernel.
Commit 3e7abf814193 ("drm/i915: Extract GT render power state management")
dropped the "if (rps->interrupts_enabled)" guard that
gen6_pm_rps_work() had around this unmask in i915_irq.c.
INTEL_RPS_ACTIVE brackets the same window, since it is set in
intel_rps_unpark() before rps_enable_interrupts() and
rps_start_timer() and cleared in intel_rps_park() before
rps_stop_timer() and rps_disable_interrupts().
Skip unmasking when RPS is no longer active (reaching unmask
operation is independent of INTERRUPT mode). This does not
prevent RPS operation from resuming on the next unpark.
In interrupt mode, intel_rps_unpark() calls
rps_enable_interrupts(), which enables and unmasks the PM
interrupts. In timer mode, it calls rps_start_timer(),
restarting periodic engine-busyness evaluation. The timer
generates software RPS events and queues rps_work() directly,
independently of PM interrupt delivery. Neither mode requires
the late worker to unmask interrupts while the GT is parked
(cherry picked from commit ca4a6deadad15b91ee083afe445fa6bdbfb68206) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gem: Prevent overstepping exec array boundary
It is possible for eb_relocate_parse_slow() to call kvfree() on
entries outside the original exec array during following
scenario inside eb_relocate_parse_slow():
1) eb_copy_relocations() allocates as many as eb->buffer_count
copies for exec entries;
2) eb_parse() appends up to two VMAs, right after incrementing
eb->buffer_count;
3) cleanup under "out" label uses this incremented buffer_count
to release relocation pointers from exec array via kvfree(),
not from VMA array.
To amend this problem, ensure that relocation cleanup uses the
original exec object count, excluding the VMAs appended by the
command parser.
(cherry picked from commit 2a0158925fb943c7ba8f3216e2734952128defc9) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: Fix NULL tty_dev dereference in rfcomm_dev_shutdown
syzbot hit a NULL pointer dereference in rfcomm_dev_shutdown() when an
RFCOMM tty is closed.
rfcomm_dev_add() puts the new device on rfcomm_dev_list first and only
then registers the tty device and saves it in dev->tty_dev. If that
registration fails, dev->tty_dev is never set at all. The device can be
looked up in the meantime, so an open() of /dev/rfcommN gets through
rfcomm_tty_install() and attaches to it. When that tty is closed again,
rfcomm_dev_shutdown() uses dev->tty_dev without checking it:
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047]
RIP: 0010:rfcomm_dev_shutdown+0x48/0xb0 net/bluetooth/rfcomm/tty.c:131
Call Trace:
tty_port_shutdown+0x1bf/0x220 drivers/tty/tty_port.c:372
tty_port_close+0x4e/0x150 drivers/tty/tty_port.c:705
tty_release+0x359/0x1670 drivers/tty/tty_io.c:1718
__fput+0x418/0xa50 fs/file_table.c:512
rfcomm_dev_destruct() already copes with a NULL dev->tty_dev. Add the
same check to rfcomm_dev_shutdown(), so the tty device is only moved
when it was actually registered. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SCO: serialise sco_conn lifetime against sco_recv_scodata()
sco_recv_scodata() upgrades the weak hcon->sco_data back-pointer to a
strong reference under hdev->lock:
hci_dev_lock(hdev);
hcon = hci_conn_hash_lookup_handle(hdev, handle);
...
conn = sco_conn_hold_unless_zero(hcon->sco_data);
hci_dev_unlock(hdev);
but the pointer is cleared from the other side without that lock. When
the last sco_conn reference is dropped, sco_conn_free() ran
conn->hcon->sco_data = NULL;
with no hdev->lock held, so the RX path could read hcon->sco_data and
call kref_get_unless_zero() on an sco_conn that was concurrently freed:
BUG: KASAN: slab-use-after-free in sco_conn_hold_unless_zero+0xbe/0x160
Write of size 4 by task kworker/u17:0
Workqueue: hci0 hci_rx_work
Call Trace:
sco_conn_hold_unless_zero+0xbe/0x160
sco_recv_scodata+0x13f/0x490
hci_rx_work+0x3af/0x730
kref_get_unless_zero() only guards against a zero refcount, not against
the backing memory already being freed.
Give hcon->sco_data an actual reference on the sco_conn it points to, so
the object cannot be freed while the pointer is still installed, and only
clear and drop it from sco_conn_del(), which runs under hdev->lock (its
callers, sco_connect_cfm() and sco_disconn_cfm(), hold it). The reader in
sco_recv_scodata() also takes hdev->lock, so the store and the read are
now serialised: the RX path either observes NULL or a reference that is
guaranteed to stay valid until it drops its own.
sco_conn_add() no longer hands its kref_init() reference to the caller as
the connection's only reference; that initial reference is the one owned
by hcon->sco_data, and callers get their own via sco_conn_hold().
Because the sco_conn can now outlive the socket (the association keeps it
alive until the link goes down), the hci_conn can no longer be dropped
from sco_conn_free() without regressing socket close: closing a connected
SCO socket must still tear the link down. Move hci_conn ownership to the
socket instead: __sco_chan_add() takes an hci_conn reference and it is
released from sco_chan_del() and sco_sock_destruct(), exactly once. The
sco_conn no longer owns an hci_conn reference, so sco_conn_add() stops
consuming one and sco_connect() drops the hci_connect_sco() reference on
every path; sco_connect_cfm() no longer needs its hci_conn_hold() dance. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Fix command skb lifetime during scan setup
During PA sync scan setup, hci_le_set_ext_scan_param_sync() gets the
address used for the PA_LINK lookup from hci_sent_cmd_data(). The
returned pointer borrows storage from sent_cmd or req_skb, without
holding a reference to either skb.
The scan worker runs on req_workqueue while hci_cmd_work() runs on the
separate device workqueue. After the scan worker loads sent_cmd, the
command worker can free and replace it before hci_sent_cmd_data()
dereferences the skb. The command payload can also be freed between
returning from the helper and comparing the address. The connection
lookup's RCU critical section does not protect the command skb.
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_sent_cmd_data+0x27c/0x2f0
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
hci_sent_cmd_data+0x27c/0x2f0
hci_le_set_scan_param_sync+0x43a/0x850
hci_passive_scan_sync+0xb09/0x1460
hci_update_passive_scan_sync+0x47c/0x6e0
hci_le_pa_create_sync+0x200/0xa70
hci_cmd_sync_work+0x13c/0x290
Allocated by task 95:
skb_clone+0x13f/0x340
hci_cmd_work+0x2a9/0x7e0
Freed by task 95:
kmem_cache_free+0xba/0x3a0
hci_cmd_work+0x29c/0x7e0
Use hdev->lock to serialize the address snapshot with sent_cmd
replacement. Protect req_skb replacement and completion cleanup with
the same lock because the helper falls back to that skb. Copy the
address before releasing the lock and use the copy for the existing
RCU-protected connection lookup. Release the mutex before sending or
waiting for commands, preserving the lookup and completion ordering. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sock: Serialize dead-device detachment
Rebinding an HCI socket after its controller is unregistered can race
monitor control replay and crash the kernel. hci_sock_bind() clears
hci_pi(sk)->hdev and drops the device reference under only the socket
lock, whereas send_monitor_control_replay() holds hci_sk_list.lock for
reading.
Replay can observe a non-NULL hdev, then bind can clear it and drop the
last reference before create_monitor_ctrl_open() reads hdev->id. This
can cause a NULL pointer dereference if the pointer is reloaded, or a
use-after-free if the old pointer is retained.
The kernel reported:
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
RIP: 0010:create_monitor_ctrl_open+0x579/0x800
Call Trace:
hci_sock_bind+0xd96/0x1190
__sys_bind+0x166/0x200
__x64_sys_bind+0x6d/0xb0
do_syscall_64+0xdd/0x4a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The same missing serialization lets hci_send_to_sock() select a socket
for the old device and queue its frame after bind has detached the socket
or installed a new binding.
Take hci_sk_list.lock for writing when clearing the device pointer and
resetting the socket state. This waits for existing replay and delivery
readers to finish before detachment and prevents later readers from
using the old binding. Keep hci_dev_put() outside the critical section
because the final device release can sleep. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: entry: gate shadow call stack reload on sstatus.SPP, not tp
Under CONFIG_SHADOW_CALL_STACK, handle_exception() reloads the kernel
shadow call stack pointer (gp) only when the trap came from userspace.
It made that decision with scs_load_current_if_task_changed, which
compares the trap-time tp (read back from sscratch into s5) against the
current tp:
beq \prev, tp, _skip_scs
scs_load_current
_skip_scs:
tp is a user-writable register. A user task that sets tp to the
linear-map address of its own task_struct (¤t) before trapping
makes the comparison succeed (can achieve by brute force with KASLR
enable under our test), so the kernel skips scs_load_current and
keeps running with the gp that userspace left in place. Under
CONFIG_SHADOW_CALL_STACK gp is the shadow call stack pointer and
load_global_pointer is a no-op, so the compiler-emitted
"sd ra, -8(gp)" / "ld ra, -8(gp)" in every non-leaf function then write
to, and return through, an attacker-controlled address -- an
unprivileged kernel arbitrary-write and control-flow-hijack primitive.
The poisoned gp is saved to task_struct.scs_sp on return, so the reload
is skipped on every subsequent entry as well.
Decide "came from userspace" from the hardware sstatus.SPP bit (already
in s1 at this point) instead of from tp, mirroring the check that
ret_from_exception already uses a few instructions later. SPP is
written by hardware on trap entry and cannot be forged from U-mode.
Legitimate behaviour is unchanged: user entries (SPP=0) reload the task
shadow call stack, nested kernel entries (SPP=1) skip it. |
| An arbitrary file deletion vulnerability exists in the command line interface of AOS-10 that could allow an authenticated attacker with administrative privileges to cause a denial of service. Successful exploitation could allow an attacker to crash the system, preventing it from rebooting without manual intervention and disrupting normal operation of the affected device. |
| A stored cross-site scripting (XSS) vulnerability exists in the web-based management interface of AOS that could allow an authenticated remote attacker with high privileges to inject malicious scripts. Successful exploitation could allow an attacker to execute arbitrary script code in the context of another authenticated user's browser session. |
| An authentication bypass in the PAPI protocol of AOS-10 allows an unauthenticated adjacent attacker to circumvent existing authentication controls. Successful exploitation allows an attacker to change the state of certain settings of a vulnerable system. |
| An unauthenticated command injection vulnerability exists in the command line interface of AOS-10. Successful exploitation could allow an attacker with physical access to execute arbitrary commands as a privileged user on the underlying operating system leading to complete system compromise. |
| A buffer overflow vulnerability exists in the API of AOS-10 that could allow an authenticated adjacent attacker with high privileges to achieve remote code execution. Successful exploitation could allow an attacker to execute arbitrary code as a privileged user on the underlying operating system. |
| An unauthenticated buffer overflow vulnerability exists in the command line interface of AOS-8. Successful exploitation could allow an unauthenticated remote attacker to disrupt the availability of the affected interface, along with limited access to or modification of some system data. |
| A sensitive information disclosure vulnerability in the PAPI protocol of AOS-8 could allow an unauthenticated adjacent attacker to access limited information handled by the affected service. Successful exploitation could allow an attacker to view some information and to disrupt the availability of the affected service. |
| An unauthenticated buffer overflow vulnerability exists in the underlying operating system of AOS-10 or AOS-8 and could allow an unauthenticated adjacent attacker to conduct a denial of service attack. Successful exploitation could allow an attacker to disrupt the availability of the affected system, with a limited impact to the integrity of the affected component. |
| Command injection vulnerabilities exist in the affected interface of AOS-10 that could allow an authenticated remote attacker with high privileges to perform command injection. Successful exploitation could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system. |
| A vulnerability in the CLI command handling of the AOS-8 web interface could allow an authenticated remote attacker to execute arbitrary commands on the underlying operating system. Successful exploitation could allow an attacker to run unauthorized commands on the system, potentially leading to system compromise. |
