| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: put folios not suitable for writeback
The batch holds references to the folios (see `filemap_get_folios`,
`folio_batch_release`), so we need to `folio_put` the folios we remove.
Tested on v6.18. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Fix ttm_bo_shrink() infinite LRU walk on backup failure
Apply the same fix as b2ed01e7ad ("drm/ttm: Fix ttm_bo_swapout()
infinite LRU walk on swapout failure") to the ttm_bo_shrink() path.
Move del_bulk_move from before the backup to after success only,
using ttm_resource_del_bulk_move_unevictable() since the resource
is now unevictable once fully backed up. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Triple fault if restore host CR3 fails on nested #VMEXIT
If loading L1's CR3 fails on a nested #VMEXIT, nested_svm_vmexit()
returns an error code that is ignored by most callers, and continues to
run L1 with corrupted state. A sane recovery is not possible in this
case, and HW behavior is to cause a shutdown. Inject a triple fault
instead, and do not return early from nested_svm_vmexit(). Continue
cleaning up the vCPU state (e.g. clear pending exceptions), to handle
the failure as gracefully as possible.
From the APM:
Upon #VMEXIT, the processor performs the following actions in order to
return to the host execution context:
...
if (illegal host state loaded, or exception while loading host state)
shutdown
else
execute first host instruction following the VMRUN
Remove the return value of nested_svm_vmexit(), which is mostly
unchecked anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
soc/tegra: pmc: Fix unsafe generic_handle_irq() call
Currently, when resuming from system suspend on Tegra platforms,
the following warning is observed:
WARNING: CPU: 0 PID: 14459 at kernel/irq/irqdesc.c:666
Call trace:
handle_irq_desc+0x20/0x58 (P)
tegra186_pmc_wake_syscore_resume+0xe4/0x15c
syscore_resume+0x3c/0xb8
suspend_devices_and_enter+0x510/0x540
pm_suspend+0x16c/0x1d8
The warning occurs because generic_handle_irq() is being called from
a non-interrupt context which is considered as unsafe.
Fix this warning by deferring generic_handle_irq() call to an IRQ work
which gets executed in hard IRQ context where generic_handle_irq()
can be called safely.
When PREEMPT_RT kernels are used, regular IRQ work (initialized with
init_irq_work) is deferred to run in per-CPU kthreads in preemptible
context rather than hard IRQ context. Hence, use the IRQ_WORK_INIT_HARD
variant so that with PREEMPT_RT kernels, the IRQ work is processed in
hardirq context instead of being deferred to a thread which is required
for calling generic_handle_irq().
On non-PREEMPT_RT kernels, both init_irq_work() and IRQ_WORK_INIT_HARD()
execute in IRQ context, so this change has no functional impact for
standard kernel configurations.
[treding@nvidia.com: miscellaneous cleanups] |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: Avoid G2 bus error while decoding H.264 and HEVC
For the i.MX8MQ platform, there is a hardware limitation: the g1 VPU and
g2 VPU cannot decode simultaneously; otherwise, it will cause below bus
error and produce corrupted pictures, even potentially lead to system hang.
[ 110.527986] hantro-vpu 38310000.video-codec: frame decode timed out.
[ 110.583517] hantro-vpu 38310000.video-codec: bus error detected.
Therefore, it is necessary to ensure that g1 and g2 operate alternately.
This allows for successful multi-instance decoding of H.264 and HEVC.
To achieve this, g1 and g2 share the same v4l2_m2m_dev, and then the
v4l2_m2m_dev can handle the scheduling. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't BUG() on unexpected delayed ref type in run_one_delayed_ref()
There is no need to BUG(), we can just return an error and log an error
message. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not ASSERT() when the fs flips RO inside btrfs_repair_io_failure()
[BUG]
There is a bug report that when btrfs hits ENOSPC error in a critical
path, btrfs flips RO (this part is expected, although the ENOSPC bug
still needs to be addressed).
The problem is after the RO flip, if there is a read repair pending, we
can hit the ASSERT() inside btrfs_repair_io_failure() like the following:
BTRFS info (device vdc): relocating block group 30408704 flags metadata|raid1
------------[ cut here ]------------
BTRFS: Transaction aborted (error -28)
WARNING: fs/btrfs/extent-tree.c:3235 at __btrfs_free_extent.isra.0+0x453/0xfd0, CPU#1: btrfs/383844
Modules linked in: kvm_intel kvm irqbypass
[...]
---[ end trace 0000000000000000 ]---
BTRFS info (device vdc state EA): 2 enospc errors during balance
BTRFS info (device vdc state EA): balance: ended with status: -30
BTRFS error (device vdc state EA): parent transid verify failed on logical 30556160 mirror 2 wanted 8 found 6
BTRFS error (device vdc state EA): bdev /dev/nvme0n1 errs: wr 0, rd 0, flush 0, corrupt 10, gen 0
[...]
assertion failed: !(fs_info->sb->s_flags & SB_RDONLY) :: 0, in fs/btrfs/bio.c:938
------------[ cut here ]------------
assertion failed: !(fs_info->sb->s_flags & SB_RDONLY) :: 0, in fs/btrfs/bio.c:938
kernel BUG at fs/btrfs/bio.c:938!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 868 Comm: kworker/u8:13 Tainted: G W N 6.19.0-rc6+ #4788 PREEMPT(full)
Tainted: [W]=WARN, [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
Workqueue: btrfs-endio simple_end_io_work
RIP: 0010:btrfs_repair_io_failure.cold+0xb2/0x120
RSP: 0000:ffffc90001d2bcf0 EFLAGS: 00010246
RAX: 0000000000000051 RBX: 0000000000001000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8305cf42 RDI: 00000000ffffffff
RBP: 0000000000000002 R08: 00000000fffeffff R09: ffffffff837fa988
R10: ffffffff8327a9e0 R11: 6f69747265737361 R12: ffff88813018d310
R13: ffff888168b8a000 R14: ffffc90001d2bd90 R15: ffff88810a169000
FS: 0000000000000000(0000) GS:ffff8885e752c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
------------[ cut here ]------------
[CAUSE]
The cause of -ENOSPC error during the test case btrfs/124 is still
unknown, although it's known that we still have cases where metadata can
be over-committed but can not be fulfilled correctly, thus if we hit
such ENOSPC error inside a critical path, we have no choice but abort
the current transaction.
This will mark the fs read-only.
The problem is inside the btrfs_repair_io_failure() path that we require
the fs not to be mount read-only. This is normally fine, but if we are
doing a read-repair meanwhile the fs flips RO due to a critical error,
we can enter btrfs_repair_io_failure() with super block set to
read-only, thus triggering the above crash.
[FIX]
Just replace the ASSERT() with a proper return if the fs is already
read-only. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: q6asm: drop DSP responses for closed data streams
'Commit a354f030dbce ("ASoC: qcom: q6asm: handle the responses
after closing")' attempted to ignore DSP responses arriving
after a stream had been closed.
However, those responses were still handled, causing lockups.
Fix this by unconditionally dropping all DSP responses associated with
closed data streams. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Adjust PHY FSM transition to TX_EN-to-PLL_ON for TMDS on DCN35
[Why]
A backport of the change made for DCN401 that addresses an issue where
we turn off the PHY PLL when disabling TMDS output, which causes the
OTG to remain stuck.
The OTG being stuck can lead to a hang in the DCHVM's ability to ACK
invalidations when it thinks the HUBP is still on but it's not receiving
global sync.
The transition to PLL_ON needs to be atomic as there's no guarantee
that the thread isn't pre-empted or is able to complete before the
IOMMU watchdog times out.
[How]
Backport the implementation from dcn401 back to dcn35.
There's a functional difference in when the eDP output is disabled in
dcn401 code so we don't want to utilize it directly. |
| In the Linux kernel, the following vulnerability has been resolved:
srcu: Use irq_work to start GP in tiny SRCU
Tiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(),
which acquires the workqueue pool->lock.
This causes a lockdep splat when call_srcu() is called with a scheduler
lock held, due to:
call_srcu() [holding pi_lock]
srcu_gp_start_if_needed()
schedule_work() -> pool->lock
workqueue_init() / create_worker() [holding pool->lock]
wake_up_process() -> try_to_wake_up() -> pi_lock
Also add irq_work_sync() to cleanup_srcu_struct() to prevent a
use-after-free if a queued irq_work fires after cleanup begins.
Tested with rcutorture SRCU-T and no lockdep warnings.
[ Thanks to Boqun for similar fix in patch "rcu: Use an intermediate irq_work
to start process_srcu()" ] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hci_cmd_sync_queue_once() return -EEXIST if exists
hci_cmd_sync_queue_once() needs to indicate whether a queue item was
added, so caller can know if callbacks are called, so it can avoid
leaking resources.
Change the function to return -EEXIST if queue item already exists.
Modify all callsites to handle that. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Check the error for index mapping
The ctxfi driver blindly assumed a proper value returned from
daio_device_index(), but it's not always true. Add a proper error
check to deal with the error from the function. |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: Fix kernel panic due to __initconst misuse
Fix a kernel panic when probing the driver as a module:
Unable to handle kernel paging request at virtual address
ffffd9c18eb05000
of_find_matching_node_and_match+0x5c/0x1a0
hantro_probe+0x2f4/0x7d0 [hantro_vpu]
The imx8mq_vpu_shared_resources array is referenced by variant
structures through their shared_devices field. When built as a
module, __initconst causes this data to be freed after module
init, but it's later accessed during probe, causing a page fault.
The imx8mq_vpu_shared_resources is referenced from non-init code,
so keeping __initconst or __initconst_or_module here is wrong.
Drop the __initconst annotation and let it live in the normal .rodata
section.
A bug of __initconst called from regular non-init probe code
leading to bugs during probe deferrals or during unbind-bind cycles. |
| In the Linux kernel, the following vulnerability has been resolved:
blktrace: fix __this_cpu_read/write in preemptible context
tracing_record_cmdline() internally uses __this_cpu_read() and
__this_cpu_write() on the per-CPU variable trace_cmdline_save, and
trace_save_cmdline() explicitly asserts preemption is disabled via
lockdep_assert_preemption_disabled(). These operations are only safe
when preemption is off, as they were designed to be called from the
scheduler context (probe_wakeup_sched_switch() / probe_wakeup()).
__blk_add_trace() was calling tracing_record_cmdline(current) early in
the blk_tracer path, before ring buffer reservation, from process
context where preemption is fully enabled. This triggers the following
using blktests/blktrace/002:
blktrace/002 (blktrace ftrace corruption with sysfs trace) [failed]
runtime 0.367s ... 0.437s
something found in dmesg:
[ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33
[ 81.239580] null_blk: disk nullb1 created
[ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516
[ 81.362842] caller is tracing_record_cmdline+0x10/0x40
[ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full)
[ 81.362877] Tainted: [N]=TEST
[ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[ 81.362881] Call Trace:
[ 81.362884] <TASK>
[ 81.362886] dump_stack_lvl+0x8d/0xb0
...
(See '/mnt/sda/blktests/results/nodev/blktrace/002.dmesg' for the entire message)
[ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33
[ 81.239580] null_blk: disk nullb1 created
[ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516
[ 81.362842] caller is tracing_record_cmdline+0x10/0x40
[ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full)
[ 81.362877] Tainted: [N]=TEST
[ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[ 81.362881] Call Trace:
[ 81.362884] <TASK>
[ 81.362886] dump_stack_lvl+0x8d/0xb0
[ 81.362895] check_preemption_disabled+0xce/0xe0
[ 81.362902] tracing_record_cmdline+0x10/0x40
[ 81.362923] __blk_add_trace+0x307/0x5d0
[ 81.362934] ? lock_acquire+0xe0/0x300
[ 81.362940] ? iov_iter_extract_pages+0x101/0xa30
[ 81.362959] blk_add_trace_bio+0x106/0x1e0
[ 81.362968] submit_bio_noacct_nocheck+0x24b/0x3a0
[ 81.362979] ? lockdep_init_map_type+0x58/0x260
[ 81.362988] submit_bio_wait+0x56/0x90
[ 81.363009] __blkdev_direct_IO_simple+0x16c/0x250
[ 81.363026] ? __pfx_submit_bio_wait_endio+0x10/0x10
[ 81.363038] ? rcu_read_lock_any_held+0x73/0xa0
[ 81.363051] blkdev_read_iter+0xc1/0x140
[ 81.363059] vfs_read+0x20b/0x330
[ 81.363083] ksys_read+0x67/0xe0
[ 81.363090] do_syscall_64+0xbf/0xf00
[ 81.363102] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 81.363106] RIP: 0033:0x7f281906029d
[ 81.363111] Code: 31 c0 e9 c6 fe ff ff 50 48 8d 3d 66 63 0a 00 e8 59 ff 01 00 66 0f 1f 84 00 00 00 00 00 80 3d 41 33 0e 00 00 74 17 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5b c3 66 2e 0f 1f 84 00 00 00 00 00 48 83 ec
[ 81.363113] RSP: 002b:00007ffca127dd48 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 81.363120] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281906029d
[ 81.363122] RDX: 0000000000001000 RSI: 0000559f8bfae000 RDI: 0000000000000000
[ 81.363123] RBP: 0000000000001000 R08: 0000002863a10a81 R09: 00007f281915f000
[ 81.363124] R10: 00007f2818f77b60 R11: 0000000000000246 R12: 0000559f8bfae000
[ 81.363126] R13: 0000000000000000 R14: 0000000000000000 R15: 000000000000000a
[ 81.363142] </TASK>
The same BUG fires from blk_add_trace_plug(), blk_add_trace_unplug(),
and blk_add_trace_rq() paths as well.
The purpose of tracin
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item
commit 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work
run loop") fixed the obvious case where io_worker_handle_work() took one
exit-bit snapshot before draining pending work, but the fix stops one
level too early.
io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work
run loop, yet it still snapshots that bit once before processing a whole
dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT
after the first linked item has started, the remaining linked items can
still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue
running after exit has begun.
Move the check further inside, so it covers linked items too. Note: this
is a syzbot special as it loves setting up tons of slow linked work on
weird devices like msr that take forever to read, and immediately close
the ring. Exit then takes a long time. |
| In the Linux kernel, the following vulnerability has been resolved:
proc: protect ptrace_may_access() with exec_update_lock (part 1)
Fix the easy cases where procfs currently calls ptrace_may_access() without
exec_update_lock protection, where the fix is to simply add the extra lock
or use mm_access():
- do_task_stat(): grab exec_update_lock
- proc_pid_wchan(): grab exec_update_lock
- proc_map_files_lookup(): use mm_access() instead of get_task_mm()
- proc_map_files_readdir(): use mm_access() instead of get_task_mm()
- proc_ns_get_link(): grab exec_update_lock
- proc_ns_readlink(): grab exec_update_lock |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack: destroy stale expectfn expectations on unregister
NAT helpers such as nf_nat_h323 store a raw pointer to module text in
exp->expectfn (e.g. ip_nat_q931_expect). nf_ct_helper_expectfn_unregister()
only unlinks the callback descriptor and never walks the expectation table,
so an expectation pending at module removal survives with a dangling
exp->expectfn into freed module text.
When the expected connection arrives, init_conntrack() invokes
exp->expectfn(), now a stale pointer into the unloaded module. Reproduced
on a KASAN build by loading the H.323 helpers, creating a Q.931
expectation, unloading nf_nat_h323, then connecting to the expected port:
Oops: int3: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:0xffffffffa06102d1
init_conntrack.isra.0 (net/netfilter/nf_conntrack_core.c:1862)
nf_conntrack_in (net/netfilter/nf_conntrack_core.c:2049)
ipv4_conntrack_local (net/netfilter/nf_conntrack_proto.c:223)
nf_hook_slow (net/netfilter/core.c:619)
__ip_local_out (net/ipv4/ip_output.c:120)
__tcp_transmit_skb (net/ipv4/tcp_output.c:1715)
tcp_connect (net/ipv4/tcp_output.c:4374)
tcp_v4_connect (net/ipv4/tcp_ipv4.c:345)
__sys_connect (net/socket.c:2167)
Modules linked in: nf_conntrack_h323 [last unloaded: nf_nat_h323]
Reaching the dangling state requires CAP_SYS_MODULE in the initial user
namespace to remove a NAT helper that still has live expectations, so this
is a robustness fix; leaving an expectation pointing at freed text is wrong
regardless.
Add nf_ct_helper_expectfn_destroy(), which walks the expectation table and
drops every expectation whose ->expectfn matches the descriptor being torn
down. Call it from each NAT helper's exit path after the existing RCU grace
period, so no expectation outlives the code it points at and no extra
synchronize_rcu() is introduced. With the fix, the same reproducer runs to
completion without the Oops. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: add sanity check for channel array
Fail gracefully if there is no channel array attached to the mailbox
controller. Otherwise the later dereference will cause an OOPS which
might not be seen because mailbox controllers might instantiate very
early. Remove the comment explaining the obvious while here. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: synproxy: add mutex to guard hook reference counting
As the synproxy infrastructure register netfilter hooks on-demand when a
user adds the first iptables target or nftables expression, if done
concurrently they can race each other.
Introduce a mutex to serialize the refcount control blocks access from
both frontends. While a per namespace mutex might be more efficient, it
is not needed for target/expression like SYNPROXY. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
This patch restricts setting Loose Source and Record Route (LSRR)
and Strict Source and Record Route (SSRR) IP options to users
with CAP_NET_RAW capability.
This prevents unprivileged applications from forcing packets to route
through attacker-controlled nodes to leak TCP ISN and possibly other
protocol information.
While LSRR and SSRR are commonly filtered in many network environments,
they may still be supported and forwarded along some network paths.
RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing
IPv4 Options) recommend to drop these options in 4.3 and 4.4. |
