| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error
In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc()
and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also
frees the transfer buffer.
If usb_submit_urb() fails, the error path frees the buffer explicitly with
kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set,
usb_free_urb() -> urb_destroy() frees the same buffer a second time, a double
free of the transfer buffer.
BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0
Free of addr ffff8881069ccb80 by task trigger.sh/285
Call Trace:
kfree+0x113/0x3c0
usb_free_urb.part.0+0x91/0xb0
Drop the redundant kfree(buf); usb_free_urb() already releases the transfer
buffer. This mirrors commit 03819abbeb11 ("net: usb: lan78xx: Fix double free
issue with interrupt buffer allocation"). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: validate DRAW_PRIMITIVES header size before division
vmw_cmd_draw() computes
maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl);
where header->size is u32 and is taken straight from the user-supplied
command stream. When header->size is less than sizeof(cmd->body) the
unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum.
Any user-controlled cmd->body.numVertexDecls then passes the bound and
the loop dereferences decl[i] far past the end of the kernel command
bounce buffer, producing an out-of-bounds read of kernel memory.
Reject undersized headers up front. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: bound DMA command body size against suffix pointer
vmw_cmd_dma() locates the DMA suffix at
(unsigned long) &cmd->body + header->size - sizeof(*suffix)
without checking that header->size is large enough to contain both
cmd->body and the suffix. An undersized header makes the suffix
pointer underflow back into the previous command in the bounce
buffer. The verifier later writes suffix->maximumOffset, clobbering
verified fields of an already-relocated earlier command -- a TOCTOU
on the device-visible command stream that lets one command rewrite
another's GMR id, surface id, or other authenticated fields.
Reject the command if the body is too small for the suffix to fit. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: fix integer overflow in radeon_align_pitch()
radeon_align_pitch() has the same kind of overflow issue as the old
amdgpu helper: both the alignment round-up add and the final
'aligned * cpp' calculation can overflow signed int.
If that wraps, radeon_mode_dumb_create() can end up returning an
invalid pitch or creating a zero-sized dumb buffer.
Fix this by using check_add_overflow() for the alignment round-up and
check_mul_overflow() for the final pitch calculation, returning 0 on
overflow. Also reject zero pitch and size in
radeon_mode_dumb_create().
Found via AST-based call-graph analysis using sqry. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix wrong pci_get_drvdata type in AER handlers
rtw89 stores an ieee80211_hw pointer via pci_set_drvdata() at probe
time, but io_error_detected() and io_resume() retrieve it as a
net_device pointer. This causes netif_device_detach/attach to
operate on an ieee80211_hw struct, reading and writing at wrong
offsets. The adjacent io_slot_reset() already does it correctly.
Use ieee80211_stop_queues/wake_queues instead, consistent with
every other queue stop/start path in the driver.
Tested on RTL8852CE by calling the handlers from a test module
before and after the fix. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: Correct data type for scan index to avoid infinite loop
A kernel soft lockup was observed during Wi-Fi scanning on the 6GHz band.
The CPU becomes stuck in rtw89_hw_scan_add_chan_ax for over 20 seconds,
leading to a system panic.
RIP points to 0f b6 c3 (movzbl %bl, %eax), which zero-extends
the low 8 bits of RBX into RAX.
RBX (the counter i) has reached a huge value: 0x137466a1.
watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [kworker/u16:4:6124]
Workqueue: events_unbound cfg80211_wiphy_work [cfg80211]
RIP: 0010:rtw89_hw_scan_add_chan_ax+0xb3/0x6e0 [rtw89_core]
Code: a0 48 89 45 a8 44 89 6d 9c 44 89 75 98 eb 29 66 66 2e 0f 1f
84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 c3 01
<0f> b6 c3 41 3b 44 24 74 0f 83 0b 02 00 00 0f b6 c3 48 8d 14 80 49
RSP: 0018:ffffcb48cbaa39f8 EFLAGS: 00000202
RAX: 0000000000000005 RBX: 00000000137466a1 RCX: 0000000000000000
RDX: ffff89ffc9d851a8 RSI: 0000000000004f0d RDI: 0000000096af0130
RBP: ffffcb48cbaa3a60 R08: 0000000000000000 R09: ffff8a00b7502080
R10: ffff8a00b75ff600 R11: 0000000000000000 R12: ffff89ffc7553870
R13: ffff8a00b7ac8f19 R14: ffff8a00b75020d8 R15: ffff89ffc3d54d80
FS: 0000000000000000(0000) GS:ffff8a014f962000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007558d7f9f4c4 CR3: 0000000178040001 CR4: 00000000001706f0
Call Trace:
<TASK>
rtw89_hw_scan_prep_chan_list_ax+0x8a/0x400 [rtw89_core]
rtw89_hw_scan_start+0x546/0x8a0 [rtw89_core]
? rtw89_fw_h2c_default_cmac_tbl+0x13c/0x1f0 [rtw89_core]
rtw89_ops_hw_scan+0xae/0x120 [rtw89_core]
drv_hw_scan+0xbb/0x180 [mac80211]
__ieee80211_start_scan+0x2fc/0x750 [mac80211]
ieee80211_request_scan+0xe/0x20 [mac80211]
ieee80211_scan+0x123/0x190 [mac80211]
rdev_scan+0x40/0x110 [cfg80211]
cfg80211_scan_6ghz+0x5a1/0xa30 [cfg80211]
By objdump with source:
for (i = 0; i < req->n_6ghz_params; i++) {
5fbc0: 83 c3 01 add $0x1,%ebx --> i++
5fbc3: 0f b6 c3 movzbl %bl,%eax --> get counter
fbc6: 41 3b 44 24 74 cmp 0x74(%r12),%eax
* RBX: 00000000137466a1 -> %bl = a1 -> EAX = 000000a1 (161) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: fix OOB read from firmware RX descriptor exceeding DMA buffer
In rtw_pci_rx_napi(), new_len is computed as the sum of pkt_len (14-bit
descriptor field, max 16383) and pkt_offset (drv_info_sz + shift, both
firmware-controlled). The result can exceed RTK_PCI_RX_BUF_SIZE (11478),
causing an out-of-bounds read from the pre-allocated DMA buffer when
skb_put_data copies new_len bytes. The USB transport already validates
this (rtw_usb_rx_data_put checks against RTW_USB_MAX_RECVBUF_SZ); the
PCIe path does not.
Add a check that new_len does not exceed the DMA buffer size. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: add bounds check on firmware mac_id in link lookup
The mac_id field in RX descriptors is 8 bits wide (0-255), but
assoc_link_on_macid[] has only RTW89_MAX_MAC_ID_NUM (128) entries.
While the driver currently assigns mac_id values below 128, the
descriptor value comes from firmware and is not validated before use
as an array index. Add a defensive bounds check in
rtw89_assoc_link_rcu_dereference() to guard against out-of-range
firmware values. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: fix OOB access from firmware tx status queue ID
ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a
4-bit hardware field (0-15), but the txq array only has
ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array
access.
Add a bounds check on ts.qid before using it as an array index. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix snp_filter_reserved_mem_regions() off-by-one
Sashiko notes:
> regarding the bounds check in snp_filter_reserved_mem_regions()
> called via walk_iomem_res_desc(): does the check
> if ((range_list->num_elements * 16 + 8) > PAGE_SIZE)
> allow an off-by-one heap buffer overflow?
>
> If range_list->num_elements is 255, 255 * 16 + 8 = 4088, which is <= 4096.
> Writing range->base (8 bytes) fills 4088-4095, but writing range->page_count
> (4 bytes) would write to 4096-4099, overflowing the kzalloc-allocated
> PAGE_SIZE buffer.
Fix this by accounting for the entry about to be written to, in addition to
the entries that are already allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: fix integer overflow in immediate data length check
imm_buf->len is a user-controlled uint32_t received from the network.
Adding it to imm_data_offset without overflow checking allows a
malicious initiator to send len=0xFFFFFFFF, causing req_size to wrap
around to a small value, bypassing the bounds check, and subsequently
passing a ~4GB length to sg_init_one().
Use check_add_overflow() to detect wrapping before the comparison. |
| ExtUtils::Typemaps::STL::List versions before 1.07 for Perl allocate a 32 GiB array on an empty list.
The OUTPUT typemaps call av_extend( av, len-1 ). On an empty list, this undeflows, and av_extend will allocate an array with 2^32 slots, leading to memory exhaustion.
Note that a similar issue was fixed in ExtUtils::Typemaps::STL::Vector version 1.05. |
| MP4v2 through 2.1.3 contains a heap-based out-of-bounds read in MP4File::GetChapters() that allows attackers to read past heap allocations via crafted QuickTime chapter samples. Attackers can supply an MP4 file whose chapter sample is shorter than its declared title length, crashing applications like mp4chaps or leaking adjacent heap memory into chapter titles. |
| An external control of system or configuration setting vulnerability has been reported to affect QuRouter. If a local attacker gains an administrator account, they can then exploit the vulnerability to modify data on the system.
We have already fixed the vulnerability in the following version:
QuRouter 2.7.2.113 and later |
| Improper Validation of Syntactic Correctness of Input vulnerability in mtrudel bandit allows an unauthenticated remote attacker to set conn.host and conn.port to values outside the RFC 3986 host grammar via the authority of an HTTP/1 absolute-form or authority-form request target. Bandit validates the Host header and answers 400 when it is malformed, but when the request target carries its own authority that authority takes precedence, as RFC 9112 requires, and Bandit.Pipeline.determine_host_and_port!/4 in lib/bandit/pipeline.ex passes it to the application unchecked. A request line such as GET http://good.example@evil.example/x HTTP/1.1 with a valid Host header yields a conn.host of good.example@evil.example, and the same path admits NUL, DEL and non-ASCII bytes, invalid IP literals and ports outside 1..65535. The HTTP/1.0 clause needs no Host header at all, and CONNECT places the unparsed port string in conn.port.
Applications that build absolute URLs from conn.host, such as through Plug.Conn.request_url/1 or Phoenix URL helpers, emit links whose authority the attacker chose. Message framing is unaffected, and no CR or LF can reach conn.host.
This issue affects bandit: from 0.6.0 before 1.13.0. |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| Stack-based buffer overflow in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| Integer overflow or wraparound in Windows Raw Image Extension allows an unauthorized attacker to execute code over a network. |
| During Xenstore live update the state record for a Xenstore watch with
specified watch depth is written with two bytes missing. This results
in an inconsistent state when reading the state back in the new Xenstore,
causing a crash of Xenstore or wrong Xenstore data. |
