| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: rtl8192du: Fix possible memory leak in rtl92du_init_sw_vars()
The memory allocated inside rtl92du_init_shared_data() is not freed in
any of the subsequent error paths in rtl92du_init_sw_vars().
Fix that by adding a call to rtl92du_deinit_shared_data() in the error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: pci: fix resource leak on failed NAPI setup
rtw_pci_probe() allocates PCI resources through
rtw_pci_setup_resource() before it sets up NAPI. If
rtw_pci_napi_init() fails, the error path jumps straight to
err_pci_declaim and skips rtw_pci_destroy(), leaving the PCI
resources allocated by rtw_pci_setup_resource() behind.
Add a dedicated cleanup label for the NAPI setup failure path so probe
destroys the PCI resources.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing current
mainline kernels. The tool is still under development and is not yet
publicly available. Manual inspection confirms that the bug is still
present in v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
suitable rtw88 PCI board to test with, no runtime testing was able to be
performed. |
| ImageMagick before 7.1.2-30 and 6.9.13-55 fails to properly lower the memory budget when an operation inside OpenPixelCache fails. Repeated triggering of such failures can exhaust the process memory budget and result in a denial of service. |
| rpcapd can allocate up to 65536 bytes per each RPCAP_MSG_UPDATEFILTER_REQ or RPCAP_MSG_STARTCAP_REQ message received from the client, but it never frees the memory, so it leaks memory even under normal use. A malicious client can cause the server to leak memory substantially faster. |
| ImageMagick before 7.1.2-30 and 6.9.13-55 contains a memory leak in the MSL image decoder. A crafted MSL image triggers memory allocation without proper deallocation, allowing an attacker to exhaust memory and cause a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix next buffer leak in receive_encrypted_standard()
receive_encrypted_standard() allocates next_buffer before checking
whether the number of compound PDUs already reached MAX_COMPOUND. If
the limit check fails, the function returns immediately and the newly
allocated next_buffer is not assigned to server->smallbuf/server->bigbuf,
making it leaked.
Move the MAX_COMPOUND check before allocating next_buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: lenovo-wmi-helpers: Fix memory leak in lwmi_dev_evaluate_int()
lwmi_dev_evaluate_int() leaks output.pointer when retval == NULL (found
by sashiko.dev [1]).
Fix it by moving `ret_obj = output.pointer' outside of the `if (retval)'
block so that it is always freed by the __free cleanup callback.
No functional change intended. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix memory leaks in beacon template setup
The functions ath11k_mac_setup_bcn_tmpl_ema() and
ath11k_mac_setup_bcn_tmpl_mbssid() allocate memory for beacon templates
but fail to free it when parameter setup returns an error.
Since beacon templates must be released during normal execution, they
must also be released in the error handling paths to prevent memory
leaks.
Fix this by using unified exit paths with proper cleanup in the respective
error paths.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: Fix memory leak after mt76_connac_mcu_alloc_sta_req()
mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to
be freed eventually by mt76_mcu_skb_send_msg(). However, currently if
an intermediate function fails before sending, the allocated skb is
leaked.
Specifically, mt76_connac_mcu_sta_wed_update() and
mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory
leak in the error path.
Fix this by explicitly freeing the skb in these error paths.
Commit 7c0f63fe37a5 ("wifi: mt76: mt7996: fix memory leak on
mt7996_mcu_sta_key_tlv error") made a similar change.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: release readahead folios on iterator preparation failure
netfs_prepare_read_iterator() batches readahead folios in put_batch so that
the folio references can be dropped after the I/O iterator has been
prepared.
If rolling_buffer_load_from_ra() fails after earlier folios have been
batched, the function returns immediately and leaves those references held.
Release the batch before returning the error. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix memory leak in xfs_dqinode_metadir_create()
If xfs_metadir_create() fails in xfs_dqinode_metadir_create(), the current
code returns directly, leaking the allocated update and transaction state.
If the subsequent commit fails, the caller-owned inode reference is left
behind.
Fix this memory leak by routing the create failure path through
xfs_metadir_cancel(). For both create and commit failures, finish and
release any inode returned to the caller, mirroring the unwind pattern in
xfs_metadir_mkdir().
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. Runtime validation
used kprobe fault injection during `mount -o uquota` on a metadir XFS
image. Injecting xfs_metadir_create() reproduced the old active-update path
that left mount stuck later in mount setup; after this change, the same
injection reported cancel_hits=1 and irele_hits=1. Injecting
xfs_metadir_commit() exercised the old inode-reference leak path; after
this change, it reported irele_hits=1. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/nop: fix file reference leak with IOSQE_FIXED_FILE
NOP file-acquisition support choses between a fixed (registered) file and
a normal fget()'d file based on its own IORING_NOP_FIXED_FILE flag in
sqe->nop_flags. However, a request's REQ_F_FIXED_FILE is set
independently from the generic IOSQE_FIXED_FILE sqe flag during request
init, before the issue handler runs.
If a NOP is submitted with IOSQE_FIXED_FILE set (so REQ_F_FIXED_FILE is
set) but without IORING_NOP_FIXED_FILE, io_nop() takes the normal path
and grabs a real reference via io_file_get_normal(). On completion,
io_put_file() only drops the reference when REQ_F_FIXED_FILE is clear,
so the fget()'d file is never released and leaks:
BUG: memory leak
unreferenced object 0xffff88800f42c240 (size 176):
kmem_cache_alloc_noprof+0x358/0x440
alloc_empty_file+0x57/0x180
path_openat+0x44/0x1e50
do_file_open+0x121/0x200
do_sys_openat2+0xa7/0x150
__x64_sys_openat+0x82/0xf0
Decide between fixed and normal file acquisition from REQ_F_FIXED_FILE,
the same way io_assign_file() does for every other opcode, and fold
IORING_NOP_FIXED_FILE into REQ_F_FIXED_FILE at prep time. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Fix DMA fence leak
In ffs_dmabuf_transfer(), a ffs_dma_fence object is kmalloc'd, with the
underlying dma_fence later initialized by dma_fence_init(), which sets
its kref counter to 1. Then, dma_resv_add_fence() gets a second
reference, and a pointer to the ffs_dma_fence is passed as the
usb_request's "context" field.
The dma-resv mechanism will manage the second reference, but the first
reference is never properly released; the ffs_dmabuf_cleanup() function
decreases the reference count, but only to balance with the reference
grab in ffs_dmabuf_signal_done().
The code will then slowly leak memory as more ffs_dma_fence objects are
created without being ever freed.
Address this issue by transferring ownership of the fence to the DMA
reservation object, by calling dma_fence_put() right after
dma_resv_add_fence(). The ffs_dma_fence then gets properly discarded
after being signalled. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix freeing of PMD-sized vmemmap pages
Commit bf9e4e30f353 ("x86/mm: use pagetable_free()"), switched from
freeing non-boot page tables through __free_pages() to
pagetable_free().
However, the function is also called to free vmemmap pages.
Given that vmemmap pages are not page tables, already the page_ptdesc(page)
is wrong. But worse, pagetable_free() calls:
__free_pages(page, compound_order(page));
Since vmemmap pages are not compound pages (see vmemmap_alloc_block())
-- except for HVO, which doesn't apply here -- only first page of a
PMD-sized vmemmap page is freed, leaking the other ones.
Fix it by properly decoupling pagetable and vmemmap freeing.
free_pagetable() no longer has to mess with SECTION_INFO, as only the
vmemmap is marked like that in register_page_bootmem_memmap().
The indentation in remove_pmd_table() is messed up. Fix that while
touching it.
Bootmem info handling will soon be fixed up. For now, handle it
similar to free_pagetable(), just avoiding the ifdef.
[ dhansen: changelog munging. More imperative voice ] |
| In the Linux kernel, the following vulnerability has been resolved:
USB: ulpi: fix memory leak on registration failure
The allocated device name is never freed on early ULPI device
registration failures.
Fix this by initialising the device structure earlier and releasing the
initial reference whenever registration fails. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: free iso schedules on failed submit
EHCI and FOTG210 isochronous submits build an ehci_iso_sched before
linking the URB to the endpoint queue, and keep the staged schedule in
urb->hcpriv until iso_stream_schedule() and the link helpers consume it.
If the controller is no longer accessible, or usb_hcd_link_urb_to_ep()
fails, submit jumps to done_not_linked before that handoff happens and
leaks the staged schedule still attached to urb->hcpriv.
Free the staged schedule from done_not_linked when submit fails before
the URB is linked and clear urb->hcpriv after the free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
EHCI host controller with a USB isochronous device to test with, no
runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info()
cdnsp_alloc_stream_info() allocates stream_info->stream_ctx_array with
cdnsp_alloc_stream_ctx(). If a later stream ring allocation or stream
mapping update fails, the error path frees the allocated stream rings
and stream_rings array, but leaves stream_ctx_array allocated.
Free the stream context array before falling through to the stream_rings
cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: mtu3: unmap request DMA on queue failure
mtu3_gadget_queue() maps the request before checking whether
the QMU GPD ring can accept another transfer. the request is
returned with -EAGAIN before it is linked on the endpoint
request list if mtu3_prepare_transfer() fails.
Normal completion and dequeue paths unmap requests from
mtu3_req_complete(), but this error path never reaches that
helper, so the DMA mapping is left active. Unmap the request
before returning from the failed queue path. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: misc: uss720: unregister parport on probe failure
uss720_probe() registers a parport before reading the 1284 register used
to detect unsupported Belkin F5U002 adapters. If get_1284_register()
fails, the error path drops the driver private data and the USB device
reference, but leaves the parport device registered.
Leaving the port registered is more than a private allocation leak:
parport_register_port() has already reserved a parport number and
registered the parport bus device, while pp->private_data still points at
the private data that the common error path is about to release.
Undo the pre-announce registration in the get_1284_register() failure
branch before jumping to the common private-data cleanup path. Clear
priv->pp first, matching the disconnect path and avoiding a stale pointer
in the private data.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix cancellation of a DIO and single read subrequests
When the preparation of a new subrequest for a read fails, if the
subrequest has already been added to the stream->subrequests list, it can't
simply be put and abandoned as the collector may see it. Also, if it
hasn't been queued yet, it has two outstanding refs that both need to be
put. Both DIO read and single-read dispatch fail at this; further, both
differ in the order they do things to the way buffered read works.
Fix cancellation of both DIO-read and single-read subrequests that failed
preparation by the following steps:
(1) Harmonise all three reads (buffered, dio, single) to queue the subreq
before prepping it.
(2) Make all three call netfs_queue_read() to do the queuing.
(3) Set NETFS_RREQ_ALL_QUEUED independently of the queuing as we don't
know the length of the subreq at this point.
(4) In all cases, set the error and NETFS_SREQ_FAILED flag on the subreq
and then call netfs_read_subreq_terminated() to deal with it. This
will pass responsibility off to the collector for dealing with it. |
