| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: serialize oplock close with pending break ownership
close may abort an in-flight oplock break while another breaker already
holds an opinfo reference. Releasing pending_break wakes that waiter, but
without serializing the close transition with bit acquisition it can become
a new break owner through the test_and_set_bit() fast path. It can then
overwrite OPLOCK_CLOSING with OPLOCK_ACK_WAIT and continue a break for
a dying opinfo.
Make OPLOCK_CLOSING terminal once the opinfo is removed from the inode
list. Serialize that transition, pending_break acquisition, and
OPLOCK_ACK_WAIT setup with an opinfo state lock. A breaker which loses
the race releases its ownership and returns -ENOENT. Explicitly wake
pending_break waiters during close so they can observe the terminal state.
Also prevent ACK and timeout paths from replacing OPLOCK_CLOSING with
OPLOCK_STATE_NONE. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: arp/nd proxy: fix reading neigh ha
Currently neigh ha address is read directly, but that can result in
torn/partial reads if the neigh is being updated. Use neigh_ha_snapshot
to take a stable snapshot of the address. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Use children field for rcu head and add memory barriers
When an eventfs inode is freed, it sets ei->is_freed and then uses its
ei->list to add it to the srcu link list as the list field is a union with
the rcu list head. As the ei->list is used to iterate over an SRCU
protected list without taking the eventfs_mutex, there's nothing stopping
the iteration over that list to see the ei->rcu instead of the ei->list
and it will read a corrupt target.
To fix this, change the union of the rcu list head with the children list.
On freeing the eventfs inode, set the is_free and execute a smp_wmb()
before adding the eventfs inode to the SRCU list.
On iteration of the ei->children list, at the start, execute a smp_rmb()
and then read the is_freed of the ei to see if the children list is still
valid. If is_freed is set, then the ei_child read is not valid and the
loop should exit immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
nexthop: take nh->lock for f6i_list walks in replace check and notify
fib6_check_nh_list() and __nexthop_replace_notify() walk nh->f6i_list
during an RTNL-serialized nexthop replace without holding nh->lock. IPv6
RTM_NEWROUTE/RTM_DELROUTE run without RTNL and mutate that list under
nh->lock (fib6_add_rt2node_nh(), fib6_purge_rt()), so both walks race a
concurrent route delete that unlinks and frees a fib6_info:
BUG: KASAN: slab-use-after-free in rt6_fill_node.isra.0 (net/ipv6/route.c:5799)
Read of size 4 at addr ffff888014607e64 by task exploit/143
rt6_fill_node.isra.0 (net/ipv6/route.c:5799)
fib6_rt_update (net/ipv6/route.c:6412)
__nexthop_replace_notify (net/ipv4/nexthop.c:2542)
rtm_new_nexthop (net/ipv4/nexthop.c:2554)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
BUG: KASAN: slab-use-after-free in fib6_check_nh_list (net/ipv4/nexthop.c:1605)
Read of size 8 at addr ffff888014a7d068 by task exploit/142
fib6_check_nh_list (net/ipv4/nexthop.c:1605)
rtm_new_nexthop (net/ipv4/nexthop.c:2575)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
Both walks only read the entries and take no tb6_lock, so protect them
with nh->lock; fib6_rt_update() uses gfp_any(), which returns GFP_ATOMIC
under the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. Handle NULL hcon, return 0 + do nothing to
match the previous behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix error-path detection with md_cloned_bio()
Detect the error path using md_cloned_bio() instead of relying
on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be
NULL or -1 after splitting and resubmitting a failed bio.
As a result, the error path may not be recognized and memory
allocations can incorrectly use GFP_NOIO instead of
(GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under
memory pressure. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Block region delete during region creation
Expand the range lock, rename it "regions_lock", to disable region deletion
in the critical period between construct_region() and attach_target(), as
well as the period between device_add() and registering the remove actions.
Otherwise, userspace can confuse the kernel. It can violate the assumption
the region stays registered through the completion of cxl_add_to_region().
It can violate the assumption that devm_add_action_or_reset() is working
with a live 'struct cxl_region'.
It is ok for the region to disappear outside of those windows as that
mirrors device hotplug flows where the proper locks are held. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev()
i3c_hci_addr_to_dev() walks bus->devs.i3c, which is protected by
bus.lock (rwsem). However, it is invoked from the MIPI I3C HCI IRQ
handler, which cannot take bus.lock. This allows concurrent device
addition/removal in the I3C core to modify the list while it is being
traversed, potentially leading to use-after-free or crashes.
Remove the dependency on the bus device list and introduce a dedicated
lookup table. Add an ibi_devs[] array indexed by DAT entry, maintained
under hci->lock. Update the array when IBIs are enabled or disabled,
so that it always reflects the set of devices allowed to generate IBIs.
Also update when IBIs are freed, to cover the corner case when an IBI is
freed without first being disabled (e.g. oldedev in
i3c_master_add_i3c_dev_locked()).
Move i3c_hci_addr_to_dev() into core.c, reimplement it using the new
array, and add a lockdep assertion to enforce that hci->lock is held
by callers.
Demote a message in PIO and DMA IBI handling, from an error to a debug
message, because there is a race window when the condition can arise
normally. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix missing barriers when accessing stream->subrequests locklessly
The list of subrequests attached to stream->subrequests is accessed without
locks by netfs_collect_read_results() and netfs_collect_write_results(),
and then they access subreq->flags without taking a barrier after getting
the subreq pointer from the list. Relatedly, the functions that build the
list don't use any sort of write barrier when constructing the list to make
sure that the NETFS_SREQ_IN_PROGRESS flag is perceived to be set first if
no lock is taken.
Fix this by:
(1) Add a new list_add_tail_release() function that uses a release barrier
to set the pointer to the new member of the list.
(2) Add a new list_first_entry_or_null_acquire() function that uses an
acquire barrier to read the pointer to the first member in a list (or
return NULL).
(3) Use list_add_tail_release() when adding a subreq to ->subrequests.
(4) Use list_first_entry_or_null_acquire() when initially accessing the
front of the list (when an item is removed, the pointer to the new
front iterm is obtained under the same lock). |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix the locking used by afs_get_link()
The afs filesystem in the kernel doesn't do locking correctly for symbolic
links. There are a number of problems:
(1) It doesn't do any locking around afs_read_single() to prevent races
between multiple ->get_link() calls, thereby allowing the possibility
of leaks.
(2) It doesn't use RCU barriering when accessing the buffer pointers
during RCU pathwalk.
(3) It can race with another thread updating the contents of the symlink
if a third party updated it on the server.
Fix this by the following means:
(0) Move symlink handling into its own file as this makes it more
complicated.
(1) Take the validate_lock around afs_read_single() to prevent races
between multiple ->get_link() calls.
(2) Keep a separate copy of the symlink contents with an rcu_head. This
is always going to be a lot smaller than a page, so it can be
kmalloc'd and save quite a bit of memory. It also needs a refcount
for non-RCU pathwalk.
(3) Split the symlink read and write-to-cache routines in afs from those
for directories.
(4) Discard the I/O buffer as soon as the write-to-cache completes as this
is a full page (plus a folio_queue).
(5) If there's no cache, discard the I/O buffer immediately after reading
and copying if there is no cache. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max77705: Free allocated workqueue and fix removal order
Use devm interface for allocating workqueue to fix two bugs at the same
time:
1. Driver leaks the memory on remove(), because the workqueue is not
destroyed.
2. Driver allocates workqueue and then registers interrupt handlers
with devm interface. This means that probe error paths will not use a
reversed order, but first destroy the workqueue and then, via devm
release handlers, free the interrupt.
The interrupt handler schedules work on this exact workqueue, thus if
interrupt is hit in this short time window - after destroying
workqueue, but before devm() frees the interrupt - the schedulled
work will lead to use of freed memory.
Change is not equivalent in the workqueue itself: use non-legacy API
which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is
used to update power supply (power_supply_changed()) status, thus there
is no point to run it for memory reclaim. Note that dev_name() is not
directly used in second argument to prevent possible unlikely parsing
any "%" character in device name as format. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/64s: Fix unmap race with PMD migration entries
The following race is possible with migration swap entries or
device-private THP entries. e.g. when move_pages is called on a PMD THP
page, then there maybe an intermediate state, where PMD entry acts as
a migration swap entry (pmd_present() is true). Then if an munmap
happens at the same time, then this VM_BUG_ON() can happen in
pmdp_huge_get_and_clear_full().
This patch fixes that.
Thread A: move_pages() syscall
add_folio_for_migration()
mmap_read_lock(mm)
folio_isolate_lru(folio)
mmap_read_unlock(mm)
do_move_pages_to_node()
migrate_pages()
try_to_migrate_one()
spin_lock(ptl)
set_pmd_migration_entry()
pmdp_invalidate() # PMD: _PAGE_INVALID | _PAGE_PTE | pfn
set_pmd_at() # PMD: migration swap entry (pmd_present=0)
spin_unlock(ptl)
[page copy phase] # <--- RACE WINDOW -->
Thread B: munmap()
mmap_write_downgrade(mm)
unmap_vmas() -> zap_pmd_range()
zap_huge_pmd()
__pmd_trans_huge_lock()
pmd_is_huge(): # !pmd_present && !pmd_none -> TRUE (swap entry)
pmd_lock() -> # spin_lock(ptl), waits for Thread A to release ptl
pmdp_huge_get_and_clear_full()
VM_BUG_ON(!pmd_present(*pmdp)) # HITS!
[ 287.738700][ T1867] ------------[ cut here ]------------
[ 287.743843][ T1867] kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:187!
cpu 0x0: Vector: 700 (Program Check) at [c00000044037f4f0]
pc: c000000000094ca4: pmdp_huge_get_and_clear_full+0x6c/0x23c
lr: c000000000645dec: zap_huge_pmd+0xb0/0x868
sp: c00000044037f790
msr: 800000000282b033
current = 0xc0000004032c1a00
paca = 0xc000000004fe0000 irqmask: 0x03 irq_happened: 0x09
pid = 1867, comm = a.out
kernel BUG at :187!
Linux version 6.19.0-12136-g14360d4f917c-dirty (powerpc64le-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #27 SMP PREEMPT Sun Feb 22 10:38:56 IST 2026
enter ? for help
[link register ] c000000000645dec zap_huge_pmd+0xb0/0x868
[c00000044037f790] c00000044037f7d0 (unreliable)
[c00000044037f7d0] c000000000645dcc zap_huge_pmd+0x90/0x868
[c00000044037f840] c0000000005724cc unmap_page_range+0x176c/0x1f40
[c00000044037fa00] c000000000572ea0 unmap_vmas+0xb0/0x1d8
[c00000044037fa90] c0000000005af254 unmap_region+0xb4/0x128
[c00000044037fb50] c0000000005af400 vms_complete_munmap_vmas+0x138/0x310
[c00000044037fbe0] c0000000005b0f1c do_vmi_align_munmap+0x1ec/0x238
[c00000044037fd30] c0000000005b3688 __vm_munmap+0x170/0x1f8
[c00000044037fdf0] c000000000587f74 sys_munmap+0x2c/0x40
[c00000044037fe10] c000000000032668 system_call_exception+0x128/0x350
[c00000044037fe50] c00000000000d05c system_call_vectored_common+0x15c/0x2ec
---- Exception: 3000 (System Call Vectored) at 0000000010064a2c
SP (7fff9b1ee9c0) is in userspace
0:mon> zh
commit a30b48bf1b24 ("mm/migrate_device: implement THP migration of zone device pages"),
enabled migration for device-private PMD entries. Hence this is one
other path where this warning could get trigger from.
------------[ cut here ]------------
WARNING: arch/powerpc/mm/book3s64/hash_pgtable.c:199 at hash__pmd_hugepage_update+0x48/0x284, CPU#3: hmm-tests/1905
Modules linked in: test_hmm
CPU: 3 UID: 0 PID: 1905 Comm: hmm-tests Tainted: G B W L N 7.0.0-rc1-01438-g7e2f0ee7581c #21 PREEMPT
Tainted: [B]=BAD_PAGE, [W]=WARN, [L]=SOFTLOCKUP, [N]=TEST
Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries
NIP [c000000000096b70] hash__pmd_hugepage_update+0x48/0x284
LR [c000000000096e7c] hash__pmdp_huge_get_and_clear+0xd0/0xd4
Call Trace:
[c000000604707670] [c000000004e102b8] 0xc000000004e102b8 (unreliable)
[c000000604707700] [c00000000064ec3c] set_pmd_migration_entry+0x414/0x498
[c000000604707760] [c00000000063e5a4] migrate_vma_col
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix data loss caused by incorrect use of nat_entry flag
Data loss can occur when fsync is performed on a newly created file
(before any checkpoint has been written) concurrently with a checkpoint
operation. The scenario is as follows:
create & write & fsync 'file A' write checkpoint
- f2fs_do_sync_file // inline inode
- f2fs_write_inode // inode folio is dirty
- f2fs_write_checkpoint
- f2fs_flush_merged_writes
- f2fs_sync_node_pages
- f2fs_flush_nat_entries
- f2fs_fsync_node_pages // no dirty node
- f2fs_need_inode_block_update // return false
SPO and lost 'file A'
f2fs_flush_nat_entries() sets the IS_CHECKPOINTED and HAS_LAST_FSYNC
flags for the nat_entry, but this does not mean that the checkpoint has
actually completed successfully. However, f2fs_need_inode_block_update()
checks these flags and incorrectly assumes that the checkpoint has
finished.
The root cause is that the semantics of IS_CHECKPOINTED and
HAS_LAST_FSYNC are only guaranteed after the checkpoint write fully
completes.
This patch modifies f2fs_need_inode_block_update() to acquire the
sbi->node_write lock before reading the nat_entry flags, ensuring that
once IS_CHECKPOINTED and HAS_LAST_FSYNC are observed to be set, the
checkpoint operation has already completed. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix race condition in TX timestamp ring cleanup
Fix a race condition between ice_free_tx_tstamp_ring() and ice_tx_map()
that can cause a NULL pointer dereference.
ice_free_tx_tstamp_ring currently clears the ICE_TX_FLAGS_TXTIME flag
after NULLing the tstamp_ring. This could allow a concurrent ice_tx_map
call on another CPU to dereference the tstamp_ring, which could lead to
a NULL pointer dereference.
CPU A:ice_free_tx_tstamp_ring() | CPU B:ice_tx_map()
--------------------------------|---------------------------------
tx_ring->tstamp_ring = NULL |
| ice_is_txtime_cfg() -> true
| tstamp_ring = tx_ring->tstamp_ring
| tstamp_ring->count // NULL deref!
flags &= ~ICE_TX_FLAGS_TXTIME |
Fix by:
1. Reordering ice_free_tx_tstamp_ring() to clear the flag before
NULLing the pointer, with smp_wmb() to ensure proper ordering.
2. Adding smp_rmb() in ice_tx_map() after the flag check to order the
flag read before the pointer read, using READ_ONCE() for the
pointer, and adding a NULL check as a safety net.
3. Converting tx_ring->flags from u8 to DECLARE_BITMAP() and using
atomic bitops (set_bit(), clear_bit(), test_bit()) for all flag
operations throughout the driver:
- ICE_TX_RING_FLAGS_XDP
- ICE_TX_RING_FLAGS_VLAN_L2TAG1
- ICE_TX_RING_FLAGS_VLAN_L2TAG2
- ICE_TX_RING_FLAGS_TXTIME |
| In the Linux kernel, the following vulnerability has been resolved:
pseries/papr-hvpipe: Fix race with interrupt handler
While executing ->ioctl handler or ->release handler, if an interrupt
fires on the same cpu, then we can enter into a deadlock.
This patch fixes both these handlers to take spin_lock_irq{save|restore}
versions of the lock to prevent this deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not ASSERT() when the fs flips RO inside btrfs_repair_io_failure()
[BUG]
There is a bug report that when btrfs hits ENOSPC error in a critical
path, btrfs flips RO (this part is expected, although the ENOSPC bug
still needs to be addressed).
The problem is after the RO flip, if there is a read repair pending, we
can hit the ASSERT() inside btrfs_repair_io_failure() like the following:
BTRFS info (device vdc): relocating block group 30408704 flags metadata|raid1
------------[ cut here ]------------
BTRFS: Transaction aborted (error -28)
WARNING: fs/btrfs/extent-tree.c:3235 at __btrfs_free_extent.isra.0+0x453/0xfd0, CPU#1: btrfs/383844
Modules linked in: kvm_intel kvm irqbypass
[...]
---[ end trace 0000000000000000 ]---
BTRFS info (device vdc state EA): 2 enospc errors during balance
BTRFS info (device vdc state EA): balance: ended with status: -30
BTRFS error (device vdc state EA): parent transid verify failed on logical 30556160 mirror 2 wanted 8 found 6
BTRFS error (device vdc state EA): bdev /dev/nvme0n1 errs: wr 0, rd 0, flush 0, corrupt 10, gen 0
[...]
assertion failed: !(fs_info->sb->s_flags & SB_RDONLY) :: 0, in fs/btrfs/bio.c:938
------------[ cut here ]------------
assertion failed: !(fs_info->sb->s_flags & SB_RDONLY) :: 0, in fs/btrfs/bio.c:938
kernel BUG at fs/btrfs/bio.c:938!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 868 Comm: kworker/u8:13 Tainted: G W N 6.19.0-rc6+ #4788 PREEMPT(full)
Tainted: [W]=WARN, [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
Workqueue: btrfs-endio simple_end_io_work
RIP: 0010:btrfs_repair_io_failure.cold+0xb2/0x120
RSP: 0000:ffffc90001d2bcf0 EFLAGS: 00010246
RAX: 0000000000000051 RBX: 0000000000001000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8305cf42 RDI: 00000000ffffffff
RBP: 0000000000000002 R08: 00000000fffeffff R09: ffffffff837fa988
R10: ffffffff8327a9e0 R11: 6f69747265737361 R12: ffff88813018d310
R13: ffff888168b8a000 R14: ffffc90001d2bd90 R15: ffff88810a169000
FS: 0000000000000000(0000) GS:ffff8885e752c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
------------[ cut here ]------------
[CAUSE]
The cause of -ENOSPC error during the test case btrfs/124 is still
unknown, although it's known that we still have cases where metadata can
be over-committed but can not be fulfilled correctly, thus if we hit
such ENOSPC error inside a critical path, we have no choice but abort
the current transaction.
This will mark the fs read-only.
The problem is inside the btrfs_repair_io_failure() path that we require
the fs not to be mount read-only. This is normally fine, but if we are
doing a read-repair meanwhile the fs flips RO due to a critical error,
we can enter btrfs_repair_io_failure() with super block set to
read-only, thus triggering the above crash.
[FIX]
Just replace the ASSERT() with a proper return if the fs is already
read-only. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix race condition when checking rpm_on
When autosuspend is triggered, driver rpm_on flag is set to indicate that
a suspend/resume is already in progress. However, when a userspace
application submits a command during this narrow window,
amdxdna_pm_resume_get() may incorrectly skip the resume operation because
the rpm_on flag is still set. This results in commands being submitted
while the device has not actually resumed, causing unexpected behavior.
The set_dpm() is called by suspend/resume, it relied on rpm_on flag to
avoid calling into rpm suspend/resume recursivly. So to fix this, remove
the use of the rpm_on flag entirely. Instead, introduce aie2_pm_set_dpm()
which explicitly resumes the device before invoking set_dpm(). With this
change, set_dpm() is called directly inside the suspend or resume execution
path. Otherwise, aie2_pm_set_dpm() is called. |
| Gitea's repository migration and pull mirror egress checks could be bypassed with a hostname that returns multiple DNS answers, because the address that was validated was not necessarily the address Git later connected to. A low-privileged user who can create migrations or mirrors could direct the server to internal services, reading from and writing to reachable internal Git or HTTP endpoints. Content from internal responses could additionally be disclosed through migration and mirror error messages. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix adapter registration race
Adapters can be looked up based on their id using i2c_get_adapter()
which takes a reference to the embedded struct device.
Make sure that the adapter (including its struct device) has been
initialised before adding it to the IDR to avoid accessing uninitialised
data which could, for example, lead to NULL-pointer dereferences or
use-after-free.
Note that the i2c-dev chardev, which is registered from a bus notifier,
currently uses i2c_get_adapter() so the adapter needs to be added to the
IDR before registration. |
| In the Linux kernel, the following vulnerability has been resolved:
signal: clear JOBCTL_PENDING_MASK for caller in zap_other_threads()
When a multi-threaded process receives a stop signal (e.g., SIGSTOP),
do_signal_stop() sets JOBCTL_STOP_PENDING and JOBCTL_STOP_CONSUME on all
threads and sets signal->group_stop_count to the number of threads. If
one of the threads concurrently calls execve(), de_thread() invokes
zap_other_threads() to kill all other threads. zap_other_threads()
aborts the pending group stop by resetting signal->group_stop_count to 0
and clears the JOBCTL_PENDING_MASK for all other threads. However, it
fails to clear the job control flags for the calling thread.
When execve() completes, the calling thread returns to user mode and
checks for pending signals. Seeing the stale JOBCTL_STOP_PENDING flag,
it calls do_signal_stop(), which invokes task_participate_group_stop().
Since JOBCTL_STOP_CONSUME is still set, it attempts to decrement the
already-zero signal->group_stop_count, triggering a warning:
sig->group_stop_count == 0
WARNING: CPU: 1 PID: 6475 at kernel/signal.c:373
task_participate_group_stop+0x215/0x2d0
Call Trace:
<TASK>
do_signal_stop+0x3be/0x5c0 kernel/signal.c:2619
get_signal+0xa8c/0x1330 kernel/signal.c:2884
arch_do_signal_or_restart+0xbc/0x840 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop+0x8c/0x4d0 kernel/entry/common.c:98
do_syscall_64+0x33e/0xf80 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this race condition by clearing the JOBCTL_PENDING_MASK for the
calling thread in zap_other_threads(), ensuring it does not retain any
stale job control state after the thread group is destroyed. This aligns
with other functions that tear down a thread group and abort group
stops, such as zap_process() and complete_signal(), which correctly
clear these flags for all threads including the current one. |
