| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
of/overlay: put property on deadprops only after changeset add succeeds
add_changeset_property() links a new property of a not-yet-live
target node into the node's deadprops list before handing it to
of_changeset_add_property(). If that fails, the error path frees the
property but leaves the freed pointer linked in deadprops, and
of_node_release() frees it a second time when the aborted overlay's
node is released.
Record the changeset entry first and link the property into deadprops
only on success. of_changeset_add_property() never looks at the
node's property lists, so the order of the two steps is otherwise
immaterial, and the error path frees a property that nothing
references. |
| In the Linux kernel, the following vulnerability has been resolved:
of/overlay: only treat a positive changeset id as registered
of_overlay_fdt_apply() stores the idr_alloc() return value in
ovcs->id before checking it. On failure the stored id is negative,
free_overlay_changeset()'s "if (ovcs->id)" check passes, idr_remove()
is called with a negative id and list_del() runs on ovcs->ovcs_list,
which is not initialized until after the id allocation. An allocation
failure at that point dereferences NULL.
Make free_overlay_changeset() treat only a strict-positive id as
registered. The rest of the function already copes with a
partially-initialized ovcs, so the error path stays a plain
goto err_free_ovcs. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gso: limit recursive IP-in-IP segmentation
IP-in-IP GSO can re-enter inet_gso_segment() or ipv6_gso_segment()
for each nested IP header. encap_level tracks header bytes, not callback
depth, so a deep chain can exhaust the kernel stack. Making
inet_gso_segment() stackable introduced unbounded IPv4 nesting; IPIP
GSO/TSO later made the path reachable. The IPv6 stackable path was
introduced separately and uses the same guard.
Count IPv4 and IPv6 GSO handler entries in skb_gso_cb, initialized once
per top-level GSO operation and preserved across GRE/UDP context changes.
Use the existing IP_TUNNEL_RECURSION_LIMIT for both handlers. The first
five entries pass, and the sixth returns -EINVAL before dispatching
another GSO callback. |
| In the Linux kernel, the following vulnerability has been resolved:
net: extend IPv6 exthdr detection of tunneled packets
Commit c4336a07eb6b ("net: correctly handle tunneled traffic on IPV6_CSUM
GSO fallback") split skb_gso_has_extension_hdr() into mutually exclusive
branches on skb->encapsulation. This did not yet address all paths:
1. With skb->encapsulation set, the outer header is not checked. IPv6
tunnels such as ip6_gre and ip6_tunnel add an outer Destination
Options header by default (encap_limit). Their GSO packets skip
software GSO, then skb_csum_hwoffload_help() sees the outer extension
header and calls skb_checksum_help() on the GSO skb, which warns and
drops it.
2. Tunnels over IPv6 without an outer transport header, such as
ip6_tunnel, leave skb->transport_header at the inner transport
header. skb_network_header_len() then spans the outer IPv6, tunnel
and inner IP headers, a false positive.
3. UDP tunnels without an inner network header, such as SCTP-in-UDP or
PSP, have no inner IPv6 header to check. Decide on the outer header
alone.
4. Directly dereferencing inner_ip_hdr(skb)->version without
skb_header_pointer() is unsafe.
Instead, check ipv6_ext_hdr(nexthdr) on the outer IPv6 header and, if
set, on the inner IPv6 header. Read the headers with skb_header_pointer().
Keep the skb_network_header_len() check when !skb->encapsulation to also
catch encapsulated packets without skb->encapsulation (e.g., virtio).
Use the same helper in skb_csum_hwoffload_help(). Its open coded test
has the false positive of (2) and ignores the inner header.
Background: checksum offload of tunneled packets invariants:
Non-GSO skb:
- If the inner packet is CHECKSUM_PARTIAL, Local Checksum Offload computes
the outer checksum in software and the device offloads only the inner L4
checksum.
- If the inner packet is CHECKSUM_NONE (e.g., SCTP-in-UDP, ESP-in-UDP,
Remote Checksum Offload), the device offloads the outer UDP or GRE
checksum instead.
GSO skb:
- A device with NETIF_F_GSO_UDP_TUNNEL_CSUM or NETIF_F_GSO_GRE_CSUM
computes both inner and outer checksums per segment.
The outer checksum is seeded with only the pseudo-header checksum.
A NETIF_F_IPV6_CSUM device must parse through the outer headers to
reach the inner ones. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_flow_offload: drop flowtable reference on init error path
nft_flow_offload_init() bumps the flowtable use count with
nft_use_inc() before calling nf_ct_netns_get(). When the latter
fails, the error is returned as-is and the reference is leaked.
The upper layers do not balance it either: nf_tables_newexpr()
clears expr->ops when the expression init callback fails, so the
nft_expr_more() iteration in nft_rule_expr_deactivate() and
nf_tables_rule_destroy() stops right before the failed expression
and its ->destroy callback, which would drop the reference, never
runs.
Each failed rule addition therefore leaks one flowtable reference
and the flowtable can no longer be removed: NFT_MSG_DELFLOWTABLE
keeps reporting -EBUSY even though no rule references it.
Save the nf_ct_netns_get() return value and undo the nft_use_inc()
when it fails, restoring the inc/dec pairing within
nft_flow_offload_init() itself. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: prevent TX_RING byte count overflow
tpacket_snd() drains every SEND_REQUEST frame in a TX ring and adds
each valid packet length to the signed int len_sum. Userspace can
recycle completed frames concurrently, so a single blocking send call
is not bounded by the ring size.
After enough successful transmissions len_sum wraps into the negative
range. In particular, 65536 65535-byte frames followed by a 65007-byte
frame produce 0xfffffdef, or -EIOCBQUEUED. sock_sendmsg_nosec() treats
that as an impossible return and triggers a BUG. On systems configured
to panic on oops, a CAP_NET_RAW holder can panic the host kernel.
Stop before the next frame would make the byte count exceed INT_MAX.
The positive short count leaves that frame pending for a later send
call.
A two-thread TPACKET_V2 reproducer triggered the BUG on an arm64 build
of Linux 7.3-rc4. With this change, the same reproducer returned the
expected positive short count without an oops. |
| In the Linux kernel, the following vulnerability has been resolved:
pfcp: fix socket lifetime on netdevice registration failure
pfcp_newlink() creates the UDP socket before register_netdevice().
If registration fails after pfcp_dev_init() succeeds, the core calls
pfcp_dev_uninit(), which releases the socket and clears pfcp->sk.
The newlink error path then releases it again, causing a NULL pointer
dereference. This was observed with failslab fault injection:
FAULT_INJECTION: forcing a failure.
kobject: kobject_add_internal failed for pfcp0 (error: -12 parent: net)
BUG: KASAN: null-ptr-deref in udp_tunnel_sock_release+0x1c/0x50
Read of size 8 at addr 0000000000000120 by task ip/1037
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x78/0x90
print_report+0x468/0x5cc
kasan_report+0xa4/0xf0
__asan_load8+0x7c/0xd0
udp_tunnel_sock_release+0x1c/0x50
pfcp_newlink+0x128/0x184
rtnl_newlink+0x848/0xe44
rtnetlink_rcv_msg+0x468/0x514
netlink_rcv_skb+0xc0/0x1f0
rtnetlink_rcv+0x18/0x24
netlink_unicast+0x4b8/0x558
netlink_sendmsg+0x2b8/0x584
...
Return from pfcp_del_sock() if pfcp->sk is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: ac100: Assign .num before accessing .hws
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)
about the number of elements in .hws[], so that it can warn when .hws[]
is accessed out of bounds. As noted in that change, the __counted_by
member must be initialized with the number of elements before the first
array access happens, otherwise there will be a warning from each access
prior to the initialization because the number of elements is zero.
This occurs in ac100_rtc_register_clks() due to .num being assigned only
after every clkout clock has been stored in .hws[]. With
CONFIG_UBSAN_BOUNDS and a compiler that implements __counted_by (GCC
15.1+ or Clang 20.1+), this triggers an array-index-out-of-bounds report
during probe, and with CONFIG_UBSAN_TRAP the first store traps.
Initialize .num with AC100_CLKOUT_NUM, the number of elements .hws[] was
allocated with, right after the allocation. That is the value the loop
counter ends up at on the success path anyway, so the provider's
behaviour is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: spear: initialize IRQ state before requesting alarm IRQ
devm_request_irq() enables the interrupt before it returns, so the handler
may run while probe is still initializing the device. Initialize the MMIO
address and spinlock before requesting the alarm IRQ. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: check RCV_SHUTDOWN after the sendmsg connect wait
sctp_wait_for_connect() drops the socket lock while it sleeps. An
out-of-the-blue ABORT can then be processed from the socket backlog and
unlink the association. If a concurrent shutdown(fd, SHUT_RD) sets
RCV_SHUTDOWN, the waiter breaks with err == 0 before checking
asoc->base.dead. Its final sctp_association_put() can then free the
association, leaving sctp_sendmsg_to_asoc() to continue with a dangling
pointer.
Check RCV_SHUTDOWN along with the wait error in sctp_sendmsg_to_asoc()
before using the association again. The check only accesses the socket,
so it needs no additional association reference. Return the existing
-ESRCH so that sctp_sendmsg() skips freeing a new association that may
already have been destroyed.
Keep sctp_wait_for_connect() unchanged to preserve its behavior for the
connect() caller. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: Disable TPM on null key name mismatch
The null key name check exists to protect against TPM reset attacks, so
a mismatch should stop the device from serving further requests.
Currently it does not disable the chip when it finds a mismatch.
The mismatch is logged:
tpm tpm0: null key integrity check failed
but the chip keeps serving commands:
/ # tpm2_getcap -c properties-fixed
TPM_PT_FAMILY_INDICATOR:
as UINT32: 0x08322e3000
as string: "2.0"
...
tpm2_load_null() where the null key name check is run sets the chip as
disabled only if the rc is non zero. When the mismatch is seen, rc is
zero at that point and it returns success. The other issue is that the
caller expects the null key handle to be populated when the function
returns 0 which it does here without writing the handle and proceeds
assuming the null key handle is valid.
During the test, I noticed that tpm2_start_auth_session() uses the
uninitialized stack value as the key handle since tpm2_load_null()
returns 0 despite the integrity failure and proceeds with
TPM2_CC_START_AUTH_SESS with this value as salt key handle.
Set rc to -ENODEV on the mismatch. The error path then disables the chip
and returns the correct code to the caller.
Tested in QEMU with swtpm and CONFIG_TCG_TPM2_HMAC=y by making
TPM2_CC_CONTEXT_LOAD fail with TPM2_RC_INTEGRITY and changing the name
of the re-created null key. The chip is now disabled on the mismatch. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: clear post-EOF pagecache when extending a file via write
Fix netfs to erase the contents of a hole created after the EOF by an
ordinary write if dirty data has been previously left there by writes
through an mmapped region. Neither the buffered nor the unbuffered/DIO
write path clears that stale pagecache.
Zero the tail of the folio straddling the EOF before an extending
write. That is the only folio that can hold data written past the EOF
through an mmap, as pages wholly beyond the EOF can't be faulted in.
The folio is zeroed rather than dropped so a concurrent extending write
can't lose data.
Both write paths downgrade the i_rwsem to shared, so extending writes
can run concurrently and the i_size read by the caller may be stale by
the time the folio is locked. Re-read i_size under the folio lock and
clamp the zeroed range up to it, so a racing write that already put
data into the folio isn't clobbered.
Wait for any writeback on the folio to finish before zeroing it so that
the pagecache isn't modified while it may still be read by the transport
during transmission. Honour IOCB_NOWAIT by returning -EAGAIN rather
than blocking on the folio lock, on writeback, or in folio_mkclean()'s
rmap walk when the folio is mapped.
truncate_pagecache() can't be used here: it must be called with the
i_rwsem held exclusively, but these write paths only hold it shared,
and it would block unconditionally, breaking IOCB_NOWAIT.
Callers that hold i_rwsem exclusively for the whole resize (truncate,
setattr, fallocate, clone) exclude any genuine concurrent buffered
writer, so staleness can instead be decided from the folio's dirty
state, as pagecache_isize_extended() already does for filesystems that
serialise writes against truncate/setattr via a single i_rwsem.
Export netfs_clear_stale_post_isize() helper to handle such case.
The helper is required by the CIFS client to fix generic/363. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: zero gaps in read-gaps folio to avoid writing back stale data
netfs_read_gaps() leaves gaps around a streaming write's dirty region
unread on the server side, so a short/EOF response there left stale
folio content that later got written back.
Zero it after the read completes, not before: netfs_wait_for_read()
returns rreq->transferred once ret >= 0, so build an iterator over the
same bvec array the read used, advance past ret, and zero the rest.
The dirty region already maps to sink pages in that array rather than
the real folio, so this can't touch it, and only the actual shortfall
gets zeroed instead of the whole gap upfront. |
| In the Linux kernel, the following vulnerability has been resolved:
module: fix lost error code from codetag_load_module()
If codetag_load_module() fails, err is not set to reflect the failure
and load_module() returns 0 after the module has been torn down.
Also, if the module is a livepatch, mod->klp_info allocated by
copy_module_elf() leaks on this error path. Free it via a new
livepatch_cleanup label. |
| In the Linux kernel, the following vulnerability has been resolved:
virt: vmgenid: set driver_data before registering notification handlers
Both probe paths register their notification handler before assigning
driver_data, which the handler dereferences.
In the devicetree path, the notification IRQ can fire as soon as
devm_request_irq() registers the handler: the interrupt may already be
pending at probe time, for example when a VMM injects the
generation-changed notification while restoring a guest from a snapshot
that was taken before the driver had probed (Firecracker does exactly
this on snapshot restore). The IRQ is also requested with IRQF_SHARED,
so another device sharing the line can trigger the handler just as
early. The handler then calls vmgenid_notify(), which dereferences the
still-NULL driver_data and panics:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.38+ #1 PREEMPT(none)
Hardware name: linux,dummy-virt (DT)
pc : vmgenid_notify.isra.0+0x24/0x8c
lr : vmgenid_of_irq_handler+0x14/0x34
Call trace:
vmgenid_notify.isra.0+0x24/0x8c (P)
vmgenid_of_irq_handler+0x14/0x34
__handle_irq_event_percpu+0x44/0x1bc
handle_irq_event+0x4c/0xb4
handle_fasteoi_irq+0xf8/0x1f8
The ACPI path has the same ordering problem: the handler is installed
with acpi_install_notify_handler() before driver_data is assigned.
ACPI notifications are dispatched asynchronously from a workqueue, so
the window is narrow, but a notification arriving between the two calls
hits the same NULL dereference.
Assign driver_data before registering the handlers. The state is fully
initialized at that point, so the handlers are safe to run. Should
registration fail, the probe error path leaves no dangling pointer
behind: the driver core clears driver_data in device_unbind_cleanup(). |
| In the Linux kernel, the following vulnerability has been resolved:
vc_screen: reload vc pointer before if (ret) in vcs_write() to avoid UAF
The reload of 'vc' added by commit 8fb9ea65c9d1 ("vc_screen: reload load
of struct vc_data pointer in vcs_write() to avoid UAF") sits after the
'if (ret)' block, so the copy-failure break path exits the loop without
reloading vc. If the vc was kfree()'d via vc_port_destruct during the
unlocked copy_from_user() window, the post-loop
'if (written && vc) vcs_scr_updated(vc)' is reached with a stale
non-NULL vc. The '&& vc' guard from commit a287620312dc ("vc_screen:
fix null-ptr-deref in vcs_notifier() during concurrent vcs_write") only
handles the NULL case, not this stale-non-NULL case; vcs_notifier() then
reads param->vc->vc_num from freed memory:
BUG: KASAN: slab-use-after-free in vcs_notifier+0x7c/0xd0
Read of size 2 at addr ffff888007149190
Call Trace:
vcs_notifier+0x7c/0xd0
atomic_notifier_call_chain+0x70/0xa0
vcs_scr_updated+0x77/0xa0
vcs_write+0x71b/0x7e0
Allocated by task: vc_allocate -> con_install -> tty_open
Freed by task: kfree <- vt_ioctl (VT_DISALLOCATE -> vc_port_destruct)
Move the reload to immediately after console_lock(), before 'if (ret)',
so every break path below passes a fresh vc to the post-loop
vcs_scr_updated(). |
| In the Linux kernel, the following vulnerability has been resolved:
vt: selection: Fix unsigned underflow and slab-out-of-bounds read in paste_selection()
In paste_selection(), the loop copies min_t(unsigned int,
vc_sel.buf_len - pasted,tty->receive_room) bytes per iteration into
tty_ldisc_receive_buf() and increments pasted += count.
Because the selection mutex (vc_sel.lock) is dropped inside the loop
Whenever the line discipline buffer fills up and paste_selection()
sleeps on tty->write_wait, a concurrent TIOCLINUX (TIOCL_SETSEL) ioctl
can replace vc_sel.buffer with a shorter selection and reduce
vc_sel.buf_len below pasted.
When paste_selection() resumes, vc_sel.buf_len - pasted underflows as an
unsigned integer to a large positive value, causing
tty_ldisc_receive_buf(ld, vc_sel.buffer + pasted, NULL, count) to read
up to 4094 bytes out-of-bounds past the newly allocated vc_sel.buffer.
Fix this by terminating the loop when pasted >= vc_sel.buf_len.
Kernel stack trace (Linux 7.3.0-rc3):
==================================================================
BUG: KASAN: slab-out-of-bounds in n_tty_receive_buf_common+0xa01/0x1650
Read of size 4094 at addr ffff888101c58010 by task kworker/u17:1/65
Workqueue: events_unbound flush_to_ldisc
Call Trace:
<TASK>
dump_stack_lvl+0x70/0xa0
print_report+0x153/0x4c6
kasan_report+0xf1/0x120
kasan_check_range+0x11c/0x200
__asan_memcpy+0x29/0x70
n_tty_receive_buf_common+0xa01/0x1650
tty_ldisc_receive_buf+0x66/0x110
tty_port_default_receive_buf+0x6b/0xb0
flush_to_ldisc+0x1b4/0x410
process_one_work+0x6ff/0x1110
worker_thread+0x4a8/0xb70
kthread+0x307/0x3e0
ret_from_fork+0x3ed/0x680
</TASK>
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
vt: skip screen update for DEC alignment test on backgroup consoles
[BUG]
Recently, we encountered a KASAN warning as follows:
BUG: KASAN: slab-out-of-bounds in fb_pad_aligned_buffer+0x11f/0x140
Read of size 1 at addr ff1100015fd9f6a4 by task tty_fbcon_oob/1239
CPU: 7 UID: 0 PID: 1239 Comm: tty_fbcon_oob Not tainted 7.3.0-rc1 #100 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
Call Trace:
<TASK>
...
kasan_report+0xf0/0x120
fb_pad_aligned_buffer+0x11f/0x140
ccw_putcs+0x86c/0xa80
fbcon_putcs+0x338/0x410
do_update_region+0x21d/0x450
do_con_write+0x1e0e/0x4880
con_write+0x13/0x80
n_tty_write+0x374/0x1010
file_tty_write.isra.0+0x404/0x7a0
...
reproduce:
1) open /dev/tty0, set a KDFONTOP ioctl with op.op = KD_FONT_OP_SET,
op.width = 8 and op.height = 16 (visible VC1)
2) open /dev/tty1, set a KDFONTOP ioctl with op.op = KD_FONT_OP_SET,
op.width = 28 and op.height = 24 (invisible VC2)
3) echo 3 > /sys/devices/virtual/graphics/fbcon/rotate_all
4) write EShash8(esc hash8) to tty1
[CAUSE]
All VCs render to the framebuffer. setfont only modifies the target VC's
font without resizing the framebuffer backing buffer (par->rotated.buf);
the buffer is only resized for the visible VC
(fbcon_do_set_font -> ... -> vc_do_resize -> update_screen). This relies on
the con_should_update() check performed before every update_region().
However, the ESC # 8 path (do_con_trol -> do_update_region) omits the
con_should_update() check. After changing the font size of an invisible VC,
do_update_region() fills using the new font size against a buffer that was
never resized, causing an out-of-bounds access.
[FIX]
Only push the update when the console is visible and not blanked, add
the con_should_update() check in the do_con_trol() like every other call
site of do_update_region() (update_region(), invert_screen(), ...). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: unregister the input device when probe fails
setup_card() registers the input device, whose name and phys point into
struct snd_usb_caiaqdev, and then goes on to snd_card_register() and
snd_usb_caiaq_control_init(). If either fails, snd_probe() calls
snd_card_free(), which frees the device state but leaves the input
device registered: card_free() only clears the pointer, and the input
device is unregistered from snd_disconnect() alone. Reading its "uevent"
attribute afterwards dereferences freed memory:
BUG: KASAN: slab-use-after-free in string+0x4a9/0x4f0
Read of size 1 at addr ffff8880208f5043 by task caiaq/4967
add_uevent_var+0x183/0x3a0
input_dev_uevent+0x162/0x900
dev_uevent+0x2f1/0x870
uevent_show+0x1ca/0x3a0
...
Unregister the input device on the probe error path, as
snd_disconnect() does. snd_usb_caiaq_input_disconnect() is a no-op when
no input device was registered.
Reproduced with a raw-gadget Audio Kontrol 1 and a temporary hack that
makes snd_usb_caiaq_control_init() fail. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: line6: reject oversized playback packets
Each playback URB is handed a slice of out.buffer that is exactly
LINE6_ISO_PACKETS * max_packet_size_out bytes, sized from the OUT
endpoint, but the number of bytes written into that slice is never
compared against it.
submit_audio_out_urb() takes the frame count from prev_fsize, which
audio_in_callback() derived from the *IN* endpoint's received packet
length, and rescales it with the playback frame size; when prev_fsize is
still zero it synthesizes a length from the sample rate instead. On a
device declaring a large IN wMaxPacketSize and a small OUT
wMaxPacketSize, the resulting memcpy(), or the memset() when the
playback stream is idle, runs past its slice and, as the reproducer
below shows, beyond the allocation.
usb_submit_urb() is not a backstop. max_packet_size_out comes from
usb_maxpacket(), which returns only the low 11 bits of wMaxPacketSize,
while USB core validates a high-speed isochronous length against that
base scaled by usb_endpoint_maxp_mult(). A length of up to three times
the allocated slice is therefore accepted, and even a rejected URB is
only rejected after the write.
Reject a packet that does not fit the slice the driver allocated for it.
Clamping it instead would silently shorten the capture-derived rate
feedback and desynchronize the two streams.
BUG: KASAN: slab-out-of-bounds in submit_audio_out_urb (sound/usb/line6/playback.c:229)
Write of size 1024 at addr ffff888100bbd400 by task kworker/1:2/5002
Workqueue: events line6_startup_work
Call Trace:
__asan_memcpy (mm/kasan/shadow.c:106)
submit_audio_out_urb (sound/usb/line6/playback.c:229)
line6_submit_audio_out_all_urbs (sound/usb/line6/playback.c:291)
line6_stream_start (sound/usb/line6/pcm.c:194)
line6_pcm_acquire (sound/usb/line6/pcm.c:337)
line6_startup_work (sound/usb/line6/driver.c:728)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
The buggy address belongs to the object at ffff888100bbd400
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes inside of
allocated 256-byte region [ffff888100bbd400, ffff888100bbd500) |
