| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| XZ Utils provide a general-purpose data-compression library plus command-line tools. In XZ Utils 5.3.3alpha to 5.8.0, the multithreaded .xz decoder in liblzma has a bug where invalid input can at least result in a crash. The effects include heap use after free and writing to an address based on the null pointer plus an offset. Applications and libraries that use the lzma_stream_decoder_mt function are affected. The bug has been fixed in XZ Utils 5.8.1, and the fix has been committed to the v5.4, v5.6, v5.8, and master branches in the xz Git repository. No new release packages will be made from the old stable branches, but a standalone patch is available that applies to all affected releases. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: altmode should keep reference to parent
The altmode device release refers to its parent device, but without keeping
a reference to it.
When registering the altmode, get a reference to the parent and put it in
the release function.
Before this fix, when using CONFIG_DEBUG_KOBJECT_RELEASE, we see issues
like this:
[ 43.572860] kobject: 'port0.0' (ffff8880057ba008): kobject_release, parent 0000000000000000 (delayed 3000)
[ 43.573532] kobject: 'port0.1' (ffff8880057bd008): kobject_release, parent 0000000000000000 (delayed 1000)
[ 43.574407] kobject: 'port0' (ffff8880057b9008): kobject_release, parent 0000000000000000 (delayed 3000)
[ 43.575059] kobject: 'port1.0' (ffff8880057ca008): kobject_release, parent 0000000000000000 (delayed 4000)
[ 43.575908] kobject: 'port1.1' (ffff8880057c9008): kobject_release, parent 0000000000000000 (delayed 4000)
[ 43.576908] kobject: 'typec' (ffff8880062dbc00): kobject_release, parent 0000000000000000 (delayed 4000)
[ 43.577769] kobject: 'port1' (ffff8880057bf008): kobject_release, parent 0000000000000000 (delayed 3000)
[ 46.612867] ==================================================================
[ 46.613402] BUG: KASAN: slab-use-after-free in typec_altmode_release+0x38/0x129
[ 46.614003] Read of size 8 at addr ffff8880057b9118 by task kworker/2:1/48
[ 46.614538]
[ 46.614668] CPU: 2 UID: 0 PID: 48 Comm: kworker/2:1 Not tainted 6.12.0-rc1-00138-gedbae730ad31 #535
[ 46.615391] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[ 46.616042] Workqueue: events kobject_delayed_cleanup
[ 46.616446] Call Trace:
[ 46.616648] <TASK>
[ 46.616820] dump_stack_lvl+0x5b/0x7c
[ 46.617112] ? typec_altmode_release+0x38/0x129
[ 46.617470] print_report+0x14c/0x49e
[ 46.617769] ? rcu_read_unlock_sched+0x56/0x69
[ 46.618117] ? __virt_addr_valid+0x19a/0x1ab
[ 46.618456] ? kmem_cache_debug_flags+0xc/0x1d
[ 46.618807] ? typec_altmode_release+0x38/0x129
[ 46.619161] kasan_report+0x8d/0xb4
[ 46.619447] ? typec_altmode_release+0x38/0x129
[ 46.619809] ? process_scheduled_works+0x3cb/0x85f
[ 46.620185] typec_altmode_release+0x38/0x129
[ 46.620537] ? process_scheduled_works+0x3cb/0x85f
[ 46.620907] device_release+0xaf/0xf2
[ 46.621206] kobject_delayed_cleanup+0x13b/0x17a
[ 46.621584] process_scheduled_works+0x4f6/0x85f
[ 46.621955] ? __pfx_process_scheduled_works+0x10/0x10
[ 46.622353] ? hlock_class+0x31/0x9a
[ 46.622647] ? lock_acquired+0x361/0x3c3
[ 46.622956] ? move_linked_works+0x46/0x7d
[ 46.623277] worker_thread+0x1ce/0x291
[ 46.623582] ? __kthread_parkme+0xc8/0xdf
[ 46.623900] ? __pfx_worker_thread+0x10/0x10
[ 46.624236] kthread+0x17e/0x190
[ 46.624501] ? kthread+0xfb/0x190
[ 46.624756] ? __pfx_kthread+0x10/0x10
[ 46.625015] ret_from_fork+0x20/0x40
[ 46.625268] ? __pfx_kthread+0x10/0x10
[ 46.625532] ret_from_fork_asm+0x1a/0x30
[ 46.625805] </TASK>
[ 46.625953]
[ 46.626056] Allocated by task 678:
[ 46.626287] kasan_save_stack+0x24/0x44
[ 46.626555] kasan_save_track+0x14/0x2d
[ 46.626811] __kasan_kmalloc+0x3f/0x4d
[ 46.627049] __kmalloc_noprof+0x1bf/0x1f0
[ 46.627362] typec_register_port+0x23/0x491
[ 46.627698] cros_typec_probe+0x634/0xbb6
[ 46.628026] platform_probe+0x47/0x8c
[ 46.628311] really_probe+0x20a/0x47d
[ 46.628605] device_driver_attach+0x39/0x72
[ 46.628940] bind_store+0x87/0xd7
[ 46.629213] kernfs_fop_write_iter+0x1aa/0x218
[ 46.629574] vfs_write+0x1d6/0x29b
[ 46.629856] ksys_write+0xcd/0x13b
[ 46.630128] do_syscall_64+0xd4/0x139
[ 46.630420] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 46.630820]
[ 46.630946] Freed by task 48:
[ 46.631182] kasan_save_stack+0x24/0x44
[ 46.631493] kasan_save_track+0x14/0x2d
[ 46.631799] kasan_save_free_info+0x3f/0x4d
[ 46.632144] __kasan_slab_free+0x37/0x45
[ 46.632474]
---truncated--- |
| A vulnerability has been identified in Solid Edge SE2026 (All versions < V226.0 Update 5). The affected application is vulnerable to uninitialized pointer access while parsing specially crafted PAR files. An attacker could leverage this vulnerability to execute code in the context of the current process. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k_htc: Use __skb_set_length() for resetting urb before resubmit
Syzbot points out that skb_trim() has a sanity check on the existing length of
the skb, which can be uninitialised in some error paths. The intent here is
clearly just to reset the length to zero before resubmitting, so switch to
calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length()
already contains a call to skb_reset_tail_pointer(), so remove the redundant
call.
The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar
usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: Clear bo->bcm_proc_read after remove_proc_entry().
syzbot reported a warning in bcm_release(). [0]
The blamed change fixed another warning that is triggered when
connect() is issued again for a socket whose connect()ed device has
been unregistered.
However, if the socket is just close()d without the 2nd connect(), the
remaining bo->bcm_proc_read triggers unnecessary remove_proc_entry()
in bcm_release().
Let's clear bo->bcm_proc_read after remove_proc_entry() in bcm_notify().
[0]
name '4986'
WARNING: CPU: 0 PID: 5234 at fs/proc/generic.c:711 remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711
Modules linked in:
CPU: 0 UID: 0 PID: 5234 Comm: syz-executor606 Not tainted 6.11.0-rc5-syzkaller-00178-g5517ae241919 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711
Code: ff eb 05 e8 cb 1e 5e ff 48 8b 5c 24 10 48 c7 c7 e0 f7 aa 8e e8 2a 38 8e 09 90 48 c7 c7 60 3a 1b 8c 48 89 de e8 da 42 20 ff 90 <0f> 0b 90 90 48 8b 44 24 18 48 c7 44 24 40 0e 36 e0 45 49 c7 04 07
RSP: 0018:ffffc9000345fa20 EFLAGS: 00010246
RAX: 2a2d0aee2eb64600 RBX: ffff888032f1f548 RCX: ffff888029431e00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc9000345fb08 R08: ffffffff8155b2f2 R09: 1ffff1101710519a
R10: dffffc0000000000 R11: ffffed101710519b R12: ffff888011d38640
R13: 0000000000000004 R14: 0000000000000000 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ffff8880b8800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fcfb52722f0 CR3: 000000000e734000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
bcm_release+0x250/0x880 net/can/bcm.c:1578
__sock_release net/socket.c:659 [inline]
sock_close+0xbc/0x240 net/socket.c:1421
__fput+0x24a/0x8a0 fs/file_table.c:422
task_work_run+0x24f/0x310 kernel/task_work.c:228
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0xa2f/0x27f0 kernel/exit.c:882
do_group_exit+0x207/0x2c0 kernel/exit.c:1031
__do_sys_exit_group kernel/exit.c:1042 [inline]
__se_sys_exit_group kernel/exit.c:1040 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1040
x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcfb51ee969
Code: Unable to access opcode bytes at 0x7fcfb51ee93f.
RSP: 002b:00007ffce0109ca8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fcfb51ee969
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001
RBP: 00007fcfb526f3b0 R08: ffffffffffffffb8 R09: 0000555500000000
R10: 0000555500000000 R11: 0000000000000246 R12: 00007fcfb526f3b0
R13: 0000000000000000 R14: 00007fcfb5271ee0 R15: 00007fcfb51bf160
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qedi: Fix crash while reading debugfs attribute
The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly
on a __user pointer, which results into the crash.
To fix this issue, use a small local stack buffer for sprintf() and then
call simple_read_from_buffer(), which in turns make the copy_to_user()
call.
BUG: unable to handle page fault for address: 00007f4801111000
PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0
Oops: 0002 [#1] PREEMPT SMP PTI
Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023
RIP: 0010:memcpy_orig+0xcd/0x130
RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202
RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f
RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000
RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572
R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff
R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af
FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x1a/0x60
? page_fault_oops+0x183/0x510
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x22/0x30
? memcpy_orig+0xcd/0x130
vsnprintf+0x102/0x4c0
sprintf+0x51/0x80
qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324]
full_proxy_read+0x50/0x80
vfs_read+0xa5/0x2e0
? folio_add_new_anon_rmap+0x44/0xa0
? set_pte_at+0x15/0x30
? do_pte_missing+0x426/0x7f0
ksys_read+0xa5/0xe0
do_syscall_64+0x58/0x80
? __count_memcg_events+0x46/0x90
? count_memcg_event_mm+0x3d/0x60
? handle_mm_fault+0x196/0x2f0
? do_user_addr_fault+0x267/0x890
? exc_page_fault+0x69/0x150
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f4800f20b4d |
| In the Linux kernel, the following vulnerability has been resolved:
netrom: Fix data-races around sysctl_net_busy_read
We need to protect the reader reading the sysctl value because the
value can be changed concurrently. |
| OpenClaw before 2026.3.28 contains an arbitrary code execution vulnerability in mirror mode that converts untrusted sandbox files into workspace hooks. Attackers with mirror mode access can execute arbitrary code on the host during gateway startup by exploiting enabled workspace hooks. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: fore200e: fix use-after-free in tasklets during device removal
When the PCA-200E or SBA-200E adapter is being detached, the fore200e
is deallocated. However, the tx_tasklet or rx_tasklet may still be running
or pending, leading to use-after-free bug when the already freed fore200e
is accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet().
One of the race conditions can occur as follows:
CPU 0 (cleanup) | CPU 1 (tasklet)
fore200e_pca_remove_one() | fore200e_interrupt()
fore200e_shutdown() | tasklet_schedule()
kfree(fore200e) | fore200e_tx_tasklet()
| fore200e-> // UAF
Fix this by ensuring tx_tasklet or rx_tasklet is properly canceled before
the fore200e is released. Add tasklet_kill() in fore200e_shutdown() to
synchronize with any pending or running tasklets. Moreover, since
fore200e_reset() could prevent further interrupts or data transfers,
the tasklet_kill() should be placed after fore200e_reset() to prevent
the tasklet from being rescheduled in fore200e_interrupt(). Finally,
it only needs to do tasklet_kill() when the fore200e state is greater
than or equal to FORE200E_STATE_IRQ, since tasklets are uninitialized
in earlier states. In a word, the tasklet_kill() should be placed in
the FORE200E_STATE_IRQ branch within the switch...case structure.
This bug was identified through static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: gen2: Add sanity check for session stop
In iris_kill_session, inst->state is set to IRIS_INST_ERROR and
session_close is executed, which will kfree(inst_hfi_gen2->packet).
If stop_streaming is called afterward, it will cause a crash.
Add a NULL check for inst_hfi_gen2->packet before sendling STOP packet
to firmware to fix that. |
| PraisonAI is a multi-agent teams system. Prior to version 4.6.34, PraisonAI's MCP (Model Context Protocol) server (praisonai mcp serve) registers four file-handling tools by default — praisonai.rules.create, praisonai.rules.show, praisonai.rules.delete, and praisonai.workflow.show. Each accepts a path or filename string from MCP tools/call arguments and joins it onto ~/.praison/rules/ (or, for workflow.show, accepts an absolute path) with no containment check. The JSON-RPC dispatcher passes params["arguments"] blind to each handler via **kwargs without validating against the advertised input schema. By setting rule_name="../../<some-path>" an attacker walks out of the rules directory and writes any file the running user can write. Dropping a Python .pth file into the user site-packages directory escalates this primitive to arbitrary code execution in any subsequent Python process the user spawns — the next praisonai CLI invocation, an IDE script run, the user's python REPL, or any background Python service. This issue has been patched in version 4.6.34. |
| OpenClaw before 2026.4.20 contains an improper environment variable validation vulnerability in MCP stdio server configuration that allows attackers to execute arbitrary code. Malicious workspace configurations can pass dangerous startup variables like NODE_OPTIONS, LD_PRELOAD, or BASH_ENV to spawned MCP server processes, enabling code injection when operators start sessions using those servers. |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to version 3.7.16, the runWidget function in src/app/widgets/load-widget.js constructs a file path by directly concatenating user‑supplied widget identifiers without any sanitisation. Because runWidget is exposed to the renderer process via an asynchronous IPC handler with no input validation, an attacker who achieves JavaScript execution inside the renderer (for example, through a malicious plugin or a cross‑site scripting flaw in the built‑in webview) can abuse a path traversal (../) to load and execute an arbitrary JavaScript file anywhere on the victim’s filesystem. This gives the attacker local code execution with the full privileges of the electerm process, leading to complete system compromise. This issue has been patched in version 3.7.16. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in .NET Framework allows an unauthorized attacker to deny service over a network. |
| Kdenlive before 26.04.1 allows dangerous proxy parameters when an attacker-controlled project file is used. |
| uuid is for the creation of RFC9562 (formerly RFC4122) UUIDs. Prior to 14.0.0, v3, v5, and v6 accept external output buffers but do not reject out-of-range writes (small buf or large offset). This allows silent partial writes into caller-provided buffers. This vulnerability is fixed in 14.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/sh_tmu: Always leave device running after probe
The TMU device can be used as both a clocksource and a clockevent
provider. The driver tries to be smart and power itself on and off, as
well as enabling and disabling its clock when it's not in operation.
This behavior is slightly altered if the TMU is used as an early
platform device in which case the device is left powered on after probe,
but the clock is still enabled and disabled at runtime.
This has worked for a long time, but recent improvements in PREEMPT_RT
and PROVE_LOCKING have highlighted an issue. As the TMU registers itself
as a clockevent provider, clockevents_register_device(), it needs to use
raw spinlocks internally as this is the context of which the clockevent
framework interacts with the TMU driver. However in the context of
holding a raw spinlock the TMU driver can't really manage its power
state or clock with calls to pm_runtime_*() and clk_*() as these calls
end up in other platform drivers using regular spinlocks to control
power and clocks.
This mix of spinlock contexts trips a lockdep warning.
=============================
[ BUG: Invalid wait context ]
6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 Not tainted
-----------------------------
swapper/0/0 is trying to lock:
ffff000008c9e180 (&dev->power.lock){-...}-{3:3}, at: __pm_runtime_resume+0x38/0x88
other info that might help us debug this:
context-{5:5}
1 lock held by swapper/0/0:
ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0
#0: ffff8000817ec298
ccree e6601000.crypto: ARM ccree device initialized
(tick_broadcast_lock){-...}-{2:2}, at: __tick_broadcast_oneshot_control+0xa4/0x3a8
stack backtrace:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 PREEMPT
Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
Call trace:
show_stack+0x14/0x1c (C)
dump_stack_lvl+0x6c/0x90
dump_stack+0x14/0x1c
__lock_acquire+0x904/0x1584
lock_acquire+0x220/0x34c
_raw_spin_lock_irqsave+0x58/0x80
__pm_runtime_resume+0x38/0x88
sh_tmu_clock_event_set_oneshot+0x84/0xd4
clockevents_switch_state+0xfc/0x13c
tick_broadcast_set_event+0x30/0xa4
__tick_broadcast_oneshot_control+0x1e0/0x3a8
tick_broadcast_oneshot_control+0x30/0x40
cpuidle_enter_state+0x40c/0x680
cpuidle_enter+0x30/0x40
do_idle+0x1f4/0x280
cpu_startup_entry+0x34/0x40
kernel_init+0x0/0x130
do_one_initcall+0x0/0x230
__primary_switched+0x88/0x90
For non-PREEMPT_RT builds this is not really an issue, but for
PREEMPT_RT builds where normal spinlocks can sleep this might be an
issue. Be cautious and always leave the power and clock running after
probe. |
| Use-after-free in the DOM: Networking component. This vulnerability was fixed in Firefox 150.0.2, Firefox ESR 140.10.2, Firefox ESR 115.35.2, Thunderbird 150.0.2, and Thunderbird 140.10.2. |
| In the Linux kernel, the following vulnerability has been resolved:
md-cluster: fix NULL pointer dereference in process_metadata_update
The function process_metadata_update() blindly dereferences the 'thread'
pointer (acquired via rcu_dereference_protected) within the wait_event()
macro.
While the code comment states "daemon thread must exist", there is a valid
race condition window during the MD array startup sequence (md_run):
1. bitmap_load() is called, which invokes md_cluster_ops->join().
2. join() starts the "cluster_recv" thread (recv_daemon).
3. At this point, recv_daemon is active and processing messages.
4. However, mddev->thread (the main MD thread) is not initialized until
later in md_run().
If a METADATA_UPDATED message is received from a remote node during this
specific window, process_metadata_update() will be called while
mddev->thread is still NULL, leading to a kernel panic.
To fix this, we must validate the 'thread' pointer. If it is NULL, we
release the held lock (no_new_dev_lockres) and return early, safely
ignoring the update request as the array is not yet fully ready to
process it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix clk handling on PCI glue driver removal
platform_device_unregister() may still want to use the registered clks
during runtime resume callback.
Note that there is a commit d82d5303c4c5 ("net: macb: fix use after free
on rmmod") that addressed the similar problem of clk vs platform device
unregistration but just moved the bug to another place.
Save the pointers to clks into local variables for reuse after platform
device is unregistered.
BUG: KASAN: use-after-free in clk_prepare+0x5a/0x60
Read of size 8 at addr ffff888104f85e00 by task modprobe/597
CPU: 2 PID: 597 Comm: modprobe Not tainted 6.1.164+ #114
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xba
print_report+0x17f/0x496
kasan_report+0xd9/0x180
clk_prepare+0x5a/0x60
macb_runtime_resume+0x13d/0x410 [macb]
pm_generic_runtime_resume+0x97/0xd0
__rpm_callback+0xc8/0x4d0
rpm_callback+0xf6/0x230
rpm_resume+0xeeb/0x1a70
__pm_runtime_resume+0xb4/0x170
bus_remove_device+0x2e3/0x4b0
device_del+0x5b3/0xdc0
platform_device_del+0x4e/0x280
platform_device_unregister+0x11/0x50
pci_device_remove+0xae/0x210
device_remove+0xcb/0x180
device_release_driver_internal+0x529/0x770
driver_detach+0xd4/0x1a0
bus_remove_driver+0x135/0x260
driver_unregister+0x72/0xb0
pci_unregister_driver+0x26/0x220
__do_sys_delete_module+0x32e/0x550
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
</TASK>
Allocated by task 519:
kasan_save_stack+0x2c/0x50
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x8e/0x90
__clk_register+0x458/0x2890
clk_hw_register+0x1a/0x60
__clk_hw_register_fixed_rate+0x255/0x410
clk_register_fixed_rate+0x3c/0xa0
macb_probe+0x1d8/0x42e [macb_pci]
local_pci_probe+0xd7/0x190
pci_device_probe+0x252/0x600
really_probe+0x255/0x7f0
__driver_probe_device+0x1ee/0x330
driver_probe_device+0x4c/0x1f0
__driver_attach+0x1df/0x4e0
bus_for_each_dev+0x15d/0x1f0
bus_add_driver+0x486/0x5e0
driver_register+0x23a/0x3d0
do_one_initcall+0xfd/0x4d0
do_init_module+0x18b/0x5a0
load_module+0x5663/0x7950
__do_sys_finit_module+0x101/0x180
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 597:
kasan_save_stack+0x2c/0x50
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x50
__kasan_slab_free+0x106/0x180
__kmem_cache_free+0xbc/0x320
clk_unregister+0x6de/0x8d0
macb_remove+0x73/0xc0 [macb_pci]
pci_device_remove+0xae/0x210
device_remove+0xcb/0x180
device_release_driver_internal+0x529/0x770
driver_detach+0xd4/0x1a0
bus_remove_driver+0x135/0x260
driver_unregister+0x72/0xb0
pci_unregister_driver+0x26/0x220
__do_sys_delete_module+0x32e/0x550
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8 |
